When right click on any folder, said Explorer.exe does not

It shows

Signature of the problem:
Problem event name: APPCRASH
Application name: EXPLORER. EXE
Application version: 6.0.6002.18005
Application timestamp: 49e01da5
Fault Module name: StackHash_fd00
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception code: c0000005
Exception offset: 00000000
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 16393
Additional information 1: fd00
More information 2: ea6f5fe8924aaa756324d57f878341

Hello

1. when the question is is produced?
2. you remember to make changes to your computer before the problem?

Follow the steps mentioned below and check if the problem persists.

Step 1:

Start your computer in safe mode and check if the problem persists

Step 2:

 
If the problem does not persist in safe mode, there must be a third party software that is causing the problem to occur, this is why I suggest you put your computer in a clean boot state.
 
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135

Note: Put your computer in normal mode (step 7).

Tags: Windows

Similar Questions

  • Error "Unable to load the locale of \Program Files\Western Digital SmartWare\Locale files" when right-clicking on any file

    Original title:

    When right click on any file I get message saying unable to load locale files... .WD smartware closing or something simular message. Help, please

    Hello

    1. are you using a Western Digital external hard drive?

    2. where are these files be found?

    3 did you changes to the computer, before the show?

    Method 1:

    Step 1: Safe Mode

    Start your computer in safe mode and check the number.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2: Clean boot

    If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

    See the following if you are using a Western Digital HDD.

    Method 2:

    Step 1: Disconnect the external hard drive.

    Step 2: Uninstall Western Digital Smartware and check.

    Uninstall or change a program

    Method 3:

    Download and install the latest version of Western Digital Smartware

    http://www.wdc.com/wdproducts/wdsmartwareupdate/

  • (1) how to undo what I have done to my tools?  All I get is hand shoiwing when I click on a tool and tool wil does not. (2) how can I get my CC installed in my dektop in addition to my laptop?

    (1) how to undo what I have done to my tools?  All I get is hand shoiwing when I click on a tool and tool wil does not. (2) how can I get my CC installed in my dektop in addition to my laptop?

    Click window > workspace and restore of your workspace.

    to install the application of office cc, https://creative.adobe.com/products/creative-cloud

  • Explorer.exe does not start automatically

    HII,

    When I restart my laptop is wrong on the desktop whenever I need to run explorer.exe thru new task (from the Task Manager)
    I also put explorer.exe at startup option still i m facing the same issue.
    How to solve this problem?

    Hello

    Logon as administrator

    Regedit start - type in the search box - CONTROL top - right Click-RUN AS ADMIN

    Navigate to this key

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

    In the RIGHT PANE, double-click SHELL - value data and the entry should be explorer.exe.

    If you have ANY other information it please write and post here and of course change to the above

    Close Regedit and restart.

    Windows Vista explorer.exe does not start at startup
    http://www.WinVistaClub.com/T231.html

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Explorer.exe does not work correctly.

    Hello everyone.

    My name is George Sebros and I have a Toshiba Satellite A300.
    The reason why I post this new topic, it is that I need a little help from someone who knows something about my above problem:
    One day, about 2 months ago... I turn on my Satellite A300.
    When he connected, not only none of my icons appeared but also the start menu does not...
    The only thing that appeared in a screen totally BLACK, has been my folder "Documents and Settings" which opened automatically.
    There was no way I could find neither the start menu (I mean the taskbar), or my icons...
    So, whenever I close the Documents and Settings folder that had appeared, the only thing I could see was a black screen...
    It was a kind of shock to me and I couldn't believe my eyes...

    After a few days, I tried the well-known combination "Ctrl + Alt + Delete" to see what was working and what was not.
    Then I pressed the 'FILE', then 'NEW TASK' and finally, I typed the word 'explorer' in there.
    That's all! Suddenly, all turn to normal like the day before the problem started. I was happy with it, I could use my Satellite A300 again!
    However, it is an indirect way to do my work PC!
    This means that I'm still fain to use this indirect way to make the icons and the taskbar appears.
    This means that the 'explorer.exe' does not work?
    Many programs registry I use notify me on some HKY... files that contain DATA NON. I have to let you know that the explorer.exe is located in the (empty) folders.
    It indicates that transplant programs that I use, point out the problem I have?
    Can someone help me?

    I don't want to use the safe option of FORMATTING (also known as the FORMAT).
    Thanks in advance,
    George A. Sebros

    Hello

    Seems that your Vista is confused upward
    You can try to clean the registry and operating system in order to avoid the new installation of the OS.
    Please use the CCLeaner.

    I use this tool as well for free and it cleans the registry and other files at the time.
    It really helps!

    But if the BONE still does not work properly then you should try a new installation
    Of course, this procedure is radically because the HARD disk should be formatted, but on the other hand, you will get a clean and functional BONE

  • In my laptop that is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help out me

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: in my laptop is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help me.

    I have seen at redistry Edit it's explorer.exe in winlogin sell attribute.

    Hi HiteshAstan,

    one) don't you recall making any changes to the computer before this happened?

    (b) what exactly happens when you sign in to your account?  You get a specific error message?

    Step 1: Let us check if the problem persists in safe mode

    Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

     

    If the problem persists, you can deduct that the user account is corrupted

    Step 2: Create a new administrator account and then try to repair your user account

     

    Create-a-user account

    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

    Difficulty of a corrupted user profile

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

    After the back if you have any questions

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Explorer.exe does not after...

    Explorer.exe does not respond after I click 2 mouse on a mouse icon 2 on windows media player and press one of the tasks, it gives an error:

    Signature of the problem:
    Problem event name: BEX
    Application name: explorer.exe
    Application version: 6.1.7600.16450
    Application timestamp: 4aeba271
    Fault Module name: StackHash_0a9e
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception offset: 00000000
    Exception code: c0000005
    Exception data: 00000008
    The system version: 6.1.7600.2.0.0.256.1
    Locale ID: 1033
    Additional information 1: 0a9e
    More information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional information 3: 0a9e
    Additional information 4: 0a9e372d3b4ad19135b953a78882e789

    How can I solve this problem? Tried sfc/scannow

    Hi, the following DLL is blocking your Explorer:

    Image path:CTFtoolMenu.dll C:\Windows\System32\
    Image name: CTFtoolMenu.dll
    Timestamp: Sun Oct 03 08:46:47 2010

    STACK_TEXT:
    WARNING: Frame IP not in any known module. Sequence of images may be wrong.
    000dcf74 046016f4 048186a 0 00000000 ffffffff 0 x 0
    000de158 75e4a39e 00000000 03a165e8 CTFtoolMenu 003cd6ec + 0x16f4
    000de174 75e49a29 003cd6ec 03a165e8 00000000 shell32! IShellExtInit_Initialize + 0x2f
    000de314 75e498e9 03abced0 03a165e8 00000003 shell32! HDXA_QueryContextMenu + 0 x 235
    000de3b8 760697d 8 04809ab0 000d013f 00000000 shell32! CDefFolderMenu::QueryContextMenu + 0 x 414
    000de6d4 7606c 509 04809ab0 00000019 00020490 shell32! CDefView::_DoContextMenuPopup + 0 x 195
    000de704 7611f7db 037dfd9c 000de750 01f20019 shell32! CDefView::OnSelectionContextMenu + 0x6a
    000de75c 7606214a 001cd02c 000de770 037dfcf0 shell32! CListViewHost::ShowContextMenu + 0x18b
    000de77c 76062a 97 01f20019 01f20019 037dfcf0 shell32! CDefView::_DoContextMenu + 0x5a
    000de7ac 75e3c5ae 01f20019 037dfcf0 00060694 shell32! CDefView::_OnContextMenu + 0xa8

    You use this tool?

    http://endlessparadigm.com/Forum/showthread.php?TID=23481

    Update or delete.

    André

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • Windows 7: Explorer.exe does not start but if manually run it restarts my laptop.

    My laptop HP Probook 4530 s boots until the Welcome screen, it does not continue to show the desktop instead, it shows only a black screen.

    As I entered in the Task Manager, I tried to check the process and discovered that "explorer.exe" is not running. I created a new task, browse the explorer.exe and run. It shows the office, but after 10 seconds or less, it restarts and goes back to the black screen after the Welcome screen.

    How to solve this problem?

    Hi Mark,

    Check if the Userinit registry value is correct. To read, use the command:

    Press Windows key + R, and type:

    cmd /k reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v "Userinit".

    Copy what is displayed in the output and after here.

    Similarly for the value "Shell:"

    cmd /k reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v "Shell."

  • When right click on a folder, get the error message saying "Windows explorer has stop working.

    original title: Win 7

    Hi guys

    I have srs problem on my windows, I use win 7 ultimate x 64 and whenever I right click on my files, I will revive an error that says 'Windows explorer stop workin' and I have 3 option 'Search soultion' which do not and "Restart the Program", I always need to select it, and then win explore it will restart itself and also close all folders and programs, etc. "Debug".

    Please tell me what can I do to fix this bug

    Thanks for your time

    Hi hind Roselyne.

    Please see the next with a similar problem and possible, especially the SpiritX MS MVPthread:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working-Windows-7-64/62494d49-fcf4-493e-a2a2-bc5e5ee7b65f

    I hope this helps!

  • My external hard drive will appear in my Computer.But when I try to send files (right click) in the "send to", the drive does not appear.

    I can access the drive and it's files already on it. But I am unable to send files, more. There are a lot of remaining space on the external hard drive. And I use Windows Vista if it gives more clues to the problem. I can't seem to find the answer to this. Large number of people to open disk management and change the assigned letter. But that's only if (if it appears) if the player initially does not appear under my Computer.Again, i have no problem to access this drive and its contents once it is plugged into my laptop. It just does not recognize under the column "send to." It allows. That's how I was able to get what is on there now on it first.

    Hope you understand. I'm not called a techie.

    Help, please. Much appreciate any one can give me.

    Hello

    You can try the following steps and check if it helps:

    Method 1:

    a. open a Windows Explorer window.

    > Browse to your folder system hidden below.

    C:\Users\(user-name)\AppData\Roaming\Microsoft\Windows\SendToB)

    OR

    b. open the Start Menu, and then type shell: sendto in the search box and press ENTER.

    c. Add or remove any drive, folder, or shortcut app like you who uses the option open with to send it to the window below.

    NOTE: for example: Notepad, paint, Photo Gallery, dvd player, any folder, etc. For a reader, right-click on the drive in the computer, then click on create a shortcut placed on the desktop before you move the shortcut here.

    Method 2:

    You can also try to change the registry settings and check if it helps.

    Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    For more information about how to back up and restore the registry, follow the steps from the link below:

    Back up the registry

    a. Click Start, type regedit in the search box and press ENTER.

    b. navigate to the

    For the current user only:

    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

    For all the user accounts on the computer:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer

    (d) to display all the readers in the context Menu "send to" in

    > In the right pane of Solution Explorer, click with the right button on NoDrivesInSendToMenu and click on delete.

    e. click Yes to confirm the deletion.

    f. close regedit.

    g. restart the computer to apply the changes.

    Hope this information is useful.

  • Explorer Windows doesn't do not work when left clicked in the taskbar. Explorer.exe is running in the Manager of tasks for only a few seconds then cuts.

    I have a problem with the Windows Explorer. When I left click on the taskbar Task Manager indicates that explorer.exe is running, but deletes then after a few seconds. I can right-click in windows Explorer and select any file frequent or pinned and who opens, okay, right click in windows explore does not work. I clicked the windows Explorer and checked the properties that appear to be identical to my second PC that is also running windows 7 and works very well. I also open the location of the files and tried to launch explorer.exe in c:\windows which gives the same result. Can someone help me please.

    Hello
    Welcome to the Microsoft answers forum.
     
    I suggest you perform the clean boot.

    To perform a clean boot on a computer that is running Windows Vista, follow these steps:

    1. click on start, type msconfig in the search box and press ENTER.
    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
    2. in the general tab, click Selective startup.
    3. under Selective startup, clear the check box load startup items.
    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
    5. click on OK.
    When you are prompted, click on restart.
    After the computer starts, start the program or game and see if the problem is resolved.
     http://support.Microsoft.com/kb/331796

    You can also perform a full scan of your computer, please visit this link:

    http://OneCare.live.com/site/en-us/default.htm

    You can also try running sfc scan, follow these steps:

    1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.
    If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
    2. type the following command and press ENTER:
    sfc/scannow

    The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions
       http://support.Microsoft.com/kb/254649

    You can also check in safe mode, please visit this link:

    http://windowshelp.Microsoft.com/Windows/en-us/help/d063548a-3fc9-4723-99f3-b12a0c4354a81033.mspx

    Thank you and best regards,
    Azam - Microsoft Support

  • Display the Properties dialog box when you click the icons on the desktop, but does not work

    I use windows vista. This morning after a normal start, any time I click on a desktop icon to open the properties of this program, but not the program itself. What happens to all the icons.

    Hi AmyWilliams,

    1. you remember to make changes to the computer before this problem?

    2 are you able to open the program when you right-click on it and select open?

    Step 1:

    You can check the following link and try to run the Fixit and check:

    Difficulty of broken desktop shortcuts and common system maintenance tasks

    Step 2:

    Given that this issue has started recently, you can also try a system restore and check.

    You can try to perform a restore of the system to a prior restore point you have been affected by the issue.

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    To run the system restore, you can consult the following link:

    System restore

    System Restore: frequently asked questions

    Hope this information is useful.

  • When you plug the hard drive, Windows Explorer says does not not and closes all applications

    When I connect my hard drive (which has more than 70 films) my watch windows Explorer does not and it closes all active applications. I can't open my disc... hard help me...

    * original title - when I connect my hard drive (which has more than 70 films) my show windows Explorer does not and it closes all active applications. I can't open my disc... help me hard... *.

    Hi Adnot

     

    Method 1:

    I suggest to connect the hard drive, then try to run the security analysis. You may need to disable all autorun feature, if you use the drive. Then, try to perform security analysis and check if you have any viruses or malware present.
    See the link below for the analysis and verification.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Method 2:

    You can also perform a clean boot and check if you can open the hard disk properly. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

    http://support.Microsoft.com/kb/929135

    If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.
    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    a. Click Start, type msconfig.exe in the start search box and press ENTER.
    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

    b. on the general tab, click the Normal startup option and then click OK.

    c. When you are prompted to restart the computer, click on restart.

    I hope this helps.

  • 'Right click menu/open in a new window' does not-nothing happens.

    When I right click on a link, a menu very long comes with many choices that have nothing to do with the links (like 'copy image'). When I select "open in new window' or 'open in a new tab', nothing happens. I've just updated to the latest version of FF yesterday (08/05/13). I don't have whatever it is personalized for the new facility. Before to install the new everything worked fine.

    Hello lindal, this is most likely caused by an outdated addon. one of them is firebug, so in case you have installed, please upgrade to the latest version.

  • Windows Explorer.exe does not often

    Recently and I have no idea why, "explorer.exe" becomes "unresponsive" at random times when I use my Dell Inspiron 1750 running a 64 bit version of Windows 7 Home Premium. I was not able to produce this problem constantly, but it happens quite often. I can't see my taskbar, start menu or the desktop. I have to manually complete the process via the Task Manager, and then run it again to explore to rework and all good. And then finally, it happens again. Please help me. Thank you.

    Hello

    References to Vista also apply to Windows 7.

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ----------------------------------------------------

    Follow these steps:

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or
    Windows 7

    http://support.Microsoft.com/kb/929135

    Use advanced tools to solve performance problems in Windows 7
    http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to change, add or remove startup programs in Windows 7
    http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Think about it an absolute must - manually update your drivers.

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
    It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ===========================================

    Refer to these discussions because many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
    first.

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/GP/slow_windows_performance/en-us

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    Explorer Windows stopped working
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Maybe you are looking for

  • computer XP cards sd recognze

    computer XP does not recognize sd cards

  • I want too much now if the Pro Flight Yoke System running on windows xp

    Original title: Pro Flight Yoke System Hello my flight simulator works fine now but now I want too much now if the Pro Flight Yoke System running on windows xp If only my knowledge please was soon luuk

  • How to change the controller that works on my player?

    My drive with my installation for windows vista is running on the secondary controller. I need to change it to run on the PDC. Help, please!

  • SmartWatch 3 voice texts does not

    Hi all, hope someone can help or advise me. I recently bought a SmartWatch 3 with a new Ultra Z and the clock operated voice to send texts does not work. I get the screen OK Google (G +) then whne I give instruction to text it says only in offline mo

  • Dreamweaver CC and Session Variables

    My name is Mike.I'm Canadian, which means I am educated and experienced. I a BTech degree and a solid knowledge of information technology. It became necessary for me to acquire the skills needed to develop a web page and, eventually, a mobile applica