When running Disk Management, get the error - failed to connect to the virtual disk Service.
When I run the Snap on the local server disk management, I get an error message in the status bar: unable to connect to the virtual disk Service.
Thanks, I have tried these things and nothing has solved the problem. Here's what I did:
(a) check the VDS service was manual and failures later per second are 'take no action '.
ANSWER: Yes to manual and following, second has not changed to "restart the service" of "non-action".
(b) sfc/scannow as administrator
ANSWER: the System File Checker has found no problem (program reported no problem and findstr/c: "[SR]" on CBS.log doesn't have the list of issues)
(c) restore to a previous system restore point
ANSWER: I have tried restore points several more early, each of them failed
Tags: Windows
Similar Questions
-
Operating system: Windows XP.
When the client tries to automatically run a difficulty it 'diagnose and automatically repair the files of Windows and folders issues '. The client receives an error message "we're sorry, but microsoft automated troubleshooting installation services failed.
Customer also tried different difficulty, she continues to receive the same error message.
Hello KiranmaiAchuthuni,
Below, I've added a link that I hope will be able to help you on this. Please let us know status.
Microsoft Answers:
In addition,
Microsoft Fix it Center solutino:
http://support.Microsoft.com/FixIt/
Thank you
James
-
It's VERY odd and very annoying!
I set up my laptop next to my Xbox 360 with an Ethernet cable directly connecting the laptop to the XBOX, and the laptop is on our wireless network. The XBOX has access to the internet (shared through the laptop), and when I test the PC connection and the connection XBOX Live sound fine to all.
So I'll try to set up Windows Media Center, it works great! I "Add Extender", put the code to 8 digits. It passes through the installation, all works, no problems and WMC opens on the XBOX, I can go into my library, watch movies etc... works great!
However! As soon as I turn my XBOX off and back on, it will fail to connect to the WMC.
He says his 'find Windows Media Center PC' which seems to work fine, it goes to the ' Windows Media Center loading screen "contact...". ", and after about 10 seconds, I get an error"failed to connect the Xbox 360 could not connect to windows Media Center PC. Make sure that the PC is turned on and connected to the network.
I tried to configure the Extender repeatedly, whenever it works fine until I restart the XBOX... :/ - and its strange cause I still the internet connection (shared through the laptop) after turning on the XBOX, its really JUST Media Center which is screwing around.
She continues to keep trying to connect then repeatedly fails.
If I wanted to, I could re-configuration the WMC Extender EVERY TIME turn off the Xbox, which works the first time without fault, but that's all just stupid.
I can't really understand what is happening here... any help would be appreciated.
Hello
Refer the article that could help you solve this problem.
http://support.Microsoft.com/kb/932163 -
first items 12, new installation, serial No. accepted, installed and started again, but does not run. I get the following msg-box: ' LoadLibrary failed with error 126: Das angegebene Modul wurde nicht found.» Installation in German on WIN7 64 bit professional, Samsung SSD. What can I do to run this program?
Jürgen Freund
First 12 items on Window 7 64-bit. What card card video/graphic fact your computer use - AMD Radeon?
I found this YouTube video about the error 126 precisely to solve the problem.
How to fix the ERROR 126 when you open programs OpenGL - YouTube
The link was provided in an old thread from 2013 here by the ID danneomarre (see post 6 of the next thread)
LoadLibrary failed with error 126: could not find the necessary
Please let us know if it worked for you.
Thank you.
RTA
Add on... When everything is OK and work, update the 12 to 12.1 update using Help Menu/implementation of an open project.
-
installed acrobat 7.0 on windows 8.1. Installation could cmpleet, but when I try to run acrobat I get the following error: 0xc00000fd
What can we do?
Not at all surprised, is not for modern versions of Windows. You will need to buy Acrobat XI (sorry, far too late for the upgrade price), or join.
-
When I run Muse I get the following error message: error [file/deleteFile]: error #3013: file or directory is in use. I click OK and then it closes.
NEVER MIND... it seems that error is that if I try to open the Muse by clicking on the file in Web site... If I just opened Muse itself I do not receive the error message.
-
PhotoGallery asks for a CD, that I didn't when I open a session or perform a task. When I cancel, I get the error code 1706. How can I stop this program from trying to start?
Hello Mark.Mac,
Thank you for your message. Click HERE to run the Windows Installer Cleanup utility. Once you have run the utility of your computer restarts and the functionality test. You can also watch in download/install Windows Live Photo Gallery HERE. Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
I recently had to reimage my hard drive and need to reinstall CS5. When I do I get an error stating: another instance of deployment is already running. I tried to get back into market and stop before trying again to install.
I tried several times to reinstall without success.
Help, please.
Hi John,.
Scott, please see the steps mentioned in the link below.
It could be useful!
Rayyan
-
I get the message "Could not authenticate you" when I try to get the portfolio management
Original title: portfolio in MSN Money management.
I get the message "Could not authenticate you" when I try to get the portfolio management and when I try again, the same message is repeated. What type of authentication is necessary?
Hello
I recommend you contact the support team of MSN Money for assistance on this issue.
http://social.Microsoft.com/forums/en-HK/money/threads
See also Solution Center-silver
-
When I try I get the windows update error number: 0x8024400A
When I try I get the windows update error number: 0x8024400A
Hello
This problem is limited to a particular update or all updates? Thanks for mentioning the number of KB.
Follow the suggestions below for a possible solution:Method 1I suggest you consult the site mentioned below:
Temporary connection related errors may occur when you use Windows Update or Microsoft Update
http://support.microsoft.com/kb/836941.Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Method 2
If the problem is not solve I suggest you try the procedure described in the link mentioned below.You cannot install some programs or updates
http://support.Microsoft.com/kb/822798WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/See the link below and follow the steps suggested to DG_963 on July 1, 2012.
http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-Update-error-0x8024400a-on-clean-install/4c79d20d-A4B3-4724-A6D8-4a768559038aLet us know the status of the issue. -
I have CS5, I can't get the updates on this topic. When I try, I get an error saying that some updates could not be installed. I have uninstalled and reinstalled, tried several updates and called and chatted with adobe support. they sent me to you all. Can someone please help me update my CS5?
update by downloading the files directly and then apply them:
-
When running sfc/scannow, it says: error system3_.exe
Original title: error system3_.exeWhen running sfc/scannow, it is said
Microsoft Windows XP [Version 5.1.2600]
Copyright (C) 1985-2001 Microsoft Corp.C:\Documents and Settings\Administrateur > cd\
C:\>sfc/scannow
Windows file protection could not initiate a scan of protected system files.The specific error code is 0x000006ba [the RPC server is unavailable.
].any suggestion?
Thank you
We need to back up a bit and get more information...
Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system. Not knowing the basic information a problem prolongs the frustration and the agony of these issues.
Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.
Provide information on your system, the better you can:
What is your system brand and model?
What is your Version of XP and the Service Pack?
Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..
The afflicted system has a working CD/DVD (internal or external) drive?
You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?
If the system works, what do you think might have changed since the last time it did not work properly?
What is the problem you are experiencing that you think that sfc/scannow will correct?
See if the remote procedure call (RPC) Service is running. If it is not executed, it should run and many other things will not work if the RPC Service is not running.
To do this, click Start, run and enter in the box:
services.msc
Click OK to launch the Services applet.
Locate the remote procedure call (RPC) Service and see what he says in the status and Startup Type columns.
If the RPC Service is not running (it must be), right click, choose Properties and see if you can start and change the type of start to 'automatic '. If you make adjustments, click the OK button to save your changes, restart and make sure the settings "stick."
-
I want to print coupons from my computer. Activator coupon says I need to install it, when I try to install and run the program I get an error message.
I am trying to print coupons from a Web site. I try to install Coupon Activator. Then when I try, I get an error message. It will not let me install on my computer.
Hi Dustin,
Thanks for posting. You will have to contact the support for the program in which you can not install. If you encounter problems, install any programs please let us know with the exact error message.
Thank you!
Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
When you try to print the document his service hence giving error does not
I am using windows xp pro sp2
When you try to print the document his service hence giving error does not
then I start the services.msc print spooler service, but this only works for printing after that it gave the same error
Please help me
Hi kalpesh_vaghela,
- Did you the latest changes on the computer?
- What is the full error message that you receive?
- What is the number and model of the printer?
- You use any program to print the document?
- Are you experiencing a similar problem with any program that allows you to print?
- You have security software installed on the computer?
Method 1
See the link below and try the fixit tool available, check if it helps.
Problems printing and printing errors
http://support.Microsoft.com/mats/printing_problems/
Method 2
If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you configure the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
- Click Start , and then click run.
- Type msconfig , and then click OK.
The System Configuration utility dialog box appears. - Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
When you are prompted, click restart to restart the computer.
-
I put vista on my computer and it says I have 30 days to activate, but when I type in my product code I get an error message. I do not have a service pack installed, this is the problem? And if so how to obtain the service pack and what one should I get? I also have a problem with my automatic updates... many of them fail to install. How can I prevent that to happen?
original title: product activation keyHello
1. you receive an error message during the Windows update fails?
Problem with Windows Vista Activation:
Step 1:
For the problem with the activation of Windows Vista, I suggest that you check the links below that would help you to the activation of Windows Vista.
How to activate Windows Vista
http://support.Microsoft.com/kb/940315
You may be unable to activate Windows Vista over the Internet by using the Windows Activation Wizard of
http://support.Microsoft.com/kb/933177
Activating Windows: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions
Step 2:
Windows Vista has two service packs you can install service pack 1, and then later you can install service pack 2 on the computer.
Service pack (SP) is an update of Windows, often combining previously released updates, that helps make Windows more reliable.
To download the service pack, click the link below.
Service Pack Center
http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs
Problem with Windows Update:
Try to reset the Windows Update components.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
See also:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
My Acrobat Pro 11 appears msg 16 "Please uninstall and reinstall" what I've done 4 times already, so I run it and get the same msg. I spent 4 hours chatting with Adobe engineers who have not helped.
Hello
Sorry for the delay in reply!
Please run as administrator (right click on the Acrobat icon & then run as administrator).
You can check error: 16
Acrobat X Pro: Configuration error when viewing PDF files
The first step should help resolve the issue.
Let us know if this helps!
Maybe you are looking for
-
Tecra M5 and Debian - need some suggest before you start
I just bought a new Tecra M5.I need to use Debian on it.Use some suggest to give me before I start?Could I have some problems with comatibility?Thank you!
-
OfficeJet Pro 8740: HP OfficeJet Pro 8740 Factory Reset
One person got a new printer to my client and did not wait to introduce myself and put in place. They disabled USB in the menu and the reset network settings does not return. How to reset the default printer or re - activate the networking on the p
-
printer does not print from a file it just of copies of engravings
I'm helping a friend install a used HP psc printer all-in-one. It prints copies, but does not print files or the internet. We installed 2 cartridges, one black and one color, but the color cartridge is empty. I tried to download the program Assistant
-
Hello I created an application based on the Bluetooth SPP cat example, I now release and submit to the BlackBerry World for sale. However, whenever I try to build the application, I get an error complaining an invalid active path. I tried everythin
-
Restoration of Smartphones blackBerry data saved on a new device
I broke my Blackberry Pearl and can not find a way to put the data from the old device to my new. The Office has a way to switch devices, but it requires the old card sim who was crushed by my car. Nobody knows how to help me?