When the computer remains in standby mode it will not start normally, usually ok in safe mode, but even when its up and running normally it's extremely slow.

Similar Questions

• What would happen if the computer goes into hibernation mode, but there is no free space on hard drive?

  What would happen if the computer goes into hibernation mode, but there is no free space on hard drive?

  No doubt a failure to the hibernation or a nasty system crash - not sure and not willing to risk a stable system there.  :-)

• Computer will not start normally - boots to the BIOS boot screen

  Hi, today I had problems on my computer and it will not start normally upward. This started happening today. When I turn on the monitor, the HP logo appears on a blue screen (as usual), but then, there are a lot of vertical white lines grouped perfectly on the screen (it's never happened before) he started to arrive yesterday. and when I try to start it, there is just a black screen for a long time and sometimes the system recov appears but it takes SO long to finish so I just stopped and went into safe mode and did a quick scans with Malwarebytes, MS Security Essentials and SUPERAntiSpyware, but they are all come clean except SUPER which came with a few things from tracking cookies...

  Today, I have scanned a full scan with malwarebytes and it says that there is no infection.

  can someone help me? I'm at the library atm! Thank you!

  Picture of the blue screen with lines here: http://img638.imageshack.us/img638/8583/post1278441253416372.jpg

  also - im wondering how to start with recov disks? I have two drives but only as on slot dvd thing and I know to start upward with her? should I boot with it because the layout is a little down? and I don't have an installation disc windows vista then Yes.

  Thank you very much!

  Hello Winston,

  According to the image that you posted, it seems that the blue screen is a blue screen with the HP logo on the subject.

  If this is the case, then the machine has not yet reached Windows and is suspended in the machine Power On Self Test.

  My recommendation for this scenario is to contact HP about what there is something at the level of the material / process/firmware BIOS which prevents the machine to get it to start Windows Vista.

  Let us know what they have to say.

  Best regards

  Matthew_Ha

• Satellite A660 will not start again until I turn safe mode

  Just buy the toshiba Satellite A660: I tell the story to compensate closely in my answer, I hope...

  I just buy new, run the Setup for first use. When its up and running only in that day, that I noticed it start to hang up when I plugged the drive external hard for some Installer (adobe lightroom).

  Its still very well, but when I disable it, it does not start again until I have run in safe mode so I can save some files and rerun recovery.

  This time on 64-bit. With its completion of its process, this works well for a few hours.
  He fell faster now, maybe because its on 64-bit? (any recommendation if its 32 or 64 bit) specifications: i5, 4ram, 1 g ddcatd graphics, family win7 premium,...

  Now when I turn it off it never early return time windows say... Startup Repair. ..
  I have let it run from this morning till now they can't always find what's the problem (I'm refernce the loptop).

  So no idea about whats goin?

  > He fell faster now, maybe because its on 64-bit? (any recommendation if its 32 or 64 bit) specifications: i5, 4ram, 1 g ddcatd graphics, family win7 premium,...

  64-bit operating system is better if your computer supports 4 GB or more of RAM.
  Why? Because 32-bit Win recognizes max 3.2 GB, even if more RAM is available.
  It's limitation of 32-bit; regardless of what OS it is; Linux, Win XP, Vista, Win7, etc.
  This is the reason why the 64 bit OS are so popular in the last time

  With regard to the issue of the BONE;
  I recommend that you run a disk recovery again... This means that you need to reinstall the OS usign the option recovery Toshiba;
  During the turning on the laptop press F8, choose fix my computer-> drive HARD recovery

• the container plugin crashes if the computer enters in standby mode or screen saver mode

  It seems every time I put my computer in "sleep" or mode if it passes mode screen saver container plugin crashes

  Update, it seems that if I leave a video or an open game so I have to leave or turn it into safe mode it blocks it

• Computer will not start normally, in safe mode or from the recovery disk - stays on the Green loading bar of microsoft

  I got to my computer today and there was a blue screen with white writing about him say a word on the internal discharge. Then later in the day, the computer froze, after a while the screen went black with just the cursor on the screen. I restarted the computer and now it just does not start. In normal mode it gets as far as the loading screen Windows with the movement of green bar but stays on it indefinitely. If I try to start in safe mode it gets as much as crcdisk.sys and then crashes, and if I try to boot from the Vista recovery disc, it also only gets the windows loading green bar and stay on it. Any help on this would be much appreciated. Thanks in advance.

  Hello

  What is the full error message?

  Follow the suggestions and see if it helps.

  Method 1

  I suggest that do you the Startup Repair through the system recovery options with a Windows Vista installation disc.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 2

  I suggest that you perform the system restore from the system recovery options with a Windows Vista installation disc.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 3

  Perform the disk check via the system recovery options with a Windows Vista installation disc.

  a.Select command prompt.

  b.Type chkdsk /f and press ENTER.

  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• My computer will not start normally upward. Audio does not work.

  original title: cannotstart in normal mode

  I can't launch in normalmode Teh networking.then audionot works. He comesonas inputnot suppoeresinapurplebox floating around monitor? helponthis specific failure? Please

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Reinstalled XP from another computer, now after no activation it will not start upward

  Received advice to install windows for 30 days or more. My computer crashed and I used a disc, I got (from my other computer) to reinstall.  So I backed it up. Today it stopped, I can not connect, it will not accept all numbers I have on the disc or product key.  BTW, this computer is around 7 years, custom made by computer type. best system Ive ever had. Please help me get back windows on. I can't even my music, documents or anything like that. AAARGH! @# $% ! @# $% Windows xp 32 (I think). Cannot access any thing, but this Q & A good now it has 3 what that is upgraded. and I tried to format the drive today today before you stop and it wouldn't let me. All the important stuff is the disk hard - ex. I need a code or a miracle of one of you please. Thank you.  Or just really good instructions. ::) Oh and it is full,... completely had a defragmentation thread hard time. it.!

  * original title - HELP. ENOUGH, PLEASE. !  Install xp, have tried everything I could find. !*

  You have the original CD of Windows XP comes with the computer. Also the original product key?

  Also the CD from your computer else you used to reinstall Windows XP is OEM or retail?

  Note: If you use the same product key that is already in use on your other computer most likely that is the reason why you have received advice. A product key can be used to enable only a single computer and not both.

  JS
  http://www.PAGESTART.com

• Unable to perform backup task and the error is ' Service of Application COM + will not start... "

  Original title: the Service Application COM + does not start

  The Service of Application COM + does not start and shows the event ID 7000 error 1053 - does not respond within a reasonable time. I checked all the dependencies, and they are all started. SFC does not detect any system error. I can't backups work because of this problem.

  Your answer is completely wacky. While searching for a resolution, I found another thread on Norton forum that showed an error in the ComFix script. Once I fixed the error in the script, and he ran, the problem has been resolved.

  If a simple script can solve this problem, why is it not in the Microsoft KB? And why you suggest all these fixes out of the base so I needed to restore a CAB file from a backup?

  Found a similar to KB2481190 fix:

  "If you're in a scenario where you have already migrated and have corrupt COM +, you can use the following as a script to restore the repository COM + original. Copy the text indented following in Notepad and save it as COM_Restore.vbs:

  Dim objComCatalog

  Set objComCatalog = CreateObject ("COMAdmin.COMAdminCatalog")
  objComCatalog.RestoreREGDB "C:\windows\winsxs\amd64_microsoft-windows-com-complus-runtime_31bf3856ad364e35_6.1.7600.16385_none_b5bfb0b8ee629431\R000000000001.clb".

  MsgBox "restored."
  Set objComCatalog = Nothing

  Once you've saved the script, start a command prompt and navigate to the directory in which COM_Restore.vbs was registered. Type the following command:

  cscript COM_Restore.vbs

  Once you see a pop-up with "Restored backup!", you can close the command prompt and restart the client computer. »

• I've updated to Firefox 36 automatically, however, it does not start. I tried firefox safe mode, reinstall, uninstall avg antivirus, eks.

  The computer restarts during the night to install updates. Everything was fine, but now Firefox, which has been updated to version 36, will not launch. Basically, I double click on it, I get a little access to the disk and nothing. I tried to start firefox safe mode. Same thing is happening. I uninstalled by deleting any Mozilla Firefox files, programs and relocation. Still will not start. I uninstalled the old version of AVG. Still will not start. I have Microsoft Security Essentials running and have updated. Still will not start. I need new ideas.

  I just want to confirm a step that you took. When you say you deleted the program files Firefox content, this may have taken all the Firefox of the components off of your computer.

  The steps that you must follow to remove a potentially corrupted installation of firefox are:

  Open your Start menu, select "program files." In program files, select "Programs and features", this should open your window "uninstall or change a program". In this window, locate your program "Mozilla Firefox". Select the program with a left click then "Uninstall", which will appear once the program is highlighted.

  This process will remove the registry changes that can ask questions. After you completely uninstall firefox from your programs, perform a new installation of the latest version of the browser.

  If you have already completed this process without success, so there may be other problems with your windows updates, it's not uncommon. If you have problems after a new installation of Firefox, after following the instructions above, please check if your browser "Internet Explorer" is to have the same questions, if yes, then you may have problems more serious that will require new measures.

• Computer will not remain in standby mode.

  I have a computer with Windows XP, about 5 years old who often will not remain in standby mode. After 30-45 seconds it starts again and the display shows again the office.

  Does anyone have a suggestion/recommendation what to do about it?

  Thanks, any suggestions would be appreciated.

  Hello JJLinker, welcome.

  The issue is likely caused by "Wake by " settings in your power options. This gives a shot:

  1. click on START
  2. right click "My computer" and select "Properties".
  "3. click on the tab"Hardware", then select Device Manager.
  4. expand the "Network adapters" category
  5. right click on each of the devices and select "Properties".
  6. on each, go to the tab "power management."
  7 turn off the checkbox "allow this device to wake...". ' and click on 'Ok '.
  8. close all windows and restart the computer

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can Fax and Scan works when the computer is in standby?

  I am relying on Windows Fax & Scan (WFS) to try repeatedly fax a document until it succeeds.  He will continue to try even if it goes into mode after the time period specified in power options?  Right now, I've set High Performance from switch to "standby" mode, but it seems like a waste to keep the fully active computer only try to fax from time to time.  It's a must to send the fax, but if the computer doesn't have to be quite awake to do this, or if she'll wake to do that, so much better.  For example, I understand the HD turns down mode "Eve".  If there is enough RAM, I wonder if the HD even turn up just to send the fax.

  Hi Frank,.

  If Windows Fax and Scan is set to auto answer mode and your ring-in modem is defined as a factor in reactivation - usually required to be put in the BIOS of the motherboard (Basic input and output system) - the system will be woken up and answered the call.

  Note: Changing the BIOS / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.

  My dell optiplex 740 will not start.  The screen is black, once it displays the Dell logo.  It does not say that the computer is in mode 'sleep'.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You receive an error message?

  Method 1

  See the articles below and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

  Method 2

  I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Method 3

  If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

  NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

  Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

  Reinstalling Windows XP to the factory setting would not be the first option.

  It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

  I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• How do I know if the host is in standby mode

  Can anyone tell how to find hosts in standby mode? I use java sdk

  HostSystem.runtime.standbyMode

  http://pubs.VMware.com/vSphere-51/index.jsp?topic=%2Fcom.VMware.wssdk.apiref.doc%2Fvim.HostSystem.StandbyMode.html

  Enum constant

  NAME	DESCRIPTION
  Enter	The host is sleep mode.
  output	Host wakes.
  in	The host is in standby mode.
  None	The host is not in sleep mode. And is not being input/output in standby mode.