When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10)

Teredo tunneling adapter error: Code 10

I have a wireless modem in my house.  When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10) and I have to click "Reinstall driver" I did.  But it will not re - install.  I'm not too irritable.   Can help you.

In addition, I don't know if there is a related problem, but my laptop takes a long time to communicate with the printer.   The doc will be in Quebec but does not print.

Thank you.

Hi LindaGreenwood,

1. what operating system is installed on the computer?
2. you have made no changes to the computer before the broadcast took place?

Generated 10 error code when Device Manager does not have enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104

I suggest you uninstall the drivers completely uninstall and then reinstall the drivers from the manufacturers Web site.

Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

Tags: Windows

Similar Questions

  • How to install the Microsoft Isatap, Teredo Tunneling adapter Microsoft, 6to4 adapt card

    Can you explain me please, how can I solve tis problem. I don, t know where I can find this adapters, because they are not installed on my computer.

    The computer asks me to solve this problem.

    Is there a link on the internet for download? Or another solution? What is the need for this card?
    And problems wirh apparaten PnP, how do I solve this problem?
    Thanks a lot for your help

    Hello

    Don't you worry about this unless you have found errors. If so see these threads.

    http://social.answers.Microsoft.com/forums/en/w7network/thread/754c8f29-3a87-4E77-Babd-a69c8910e17e

    http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/05a8849e-89c1-4CC9-8004-f6d07a4fdf8b

    http://www.cableforum.co.UK/Board/34932105-post6.html

    ====================================

    A new Microsoft 6to4 map is created unexpectedly after restarting Windows 7 or Windows
    Server 2008 R2
    http://support.Microsoft.com/kb/980486

    How to disable certain Internet Protocol version 6 (IPv6) components in Windows Vista, Windows 7
    and Windows Server 2008
    http://support.Microsoft.com/kb/929852/en-us

    Response of Lionel Chen
    http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

    I hope this helps.

  • with regard to the teredo tunneling adapter.

    I'm running on windows 7. My office just had re-vamped. Now I receive an error code 10. This could be to use a version of windows 8 in brains of windows 7?

    JBM

    If you're on a home network you can simply disable tunneling

    To disable tunneling

    http://blogs.msdn.com/b/richin/archive/2010/11/26/how-to-disable-Teredo-tunneling-pseudo-interface-6to4-adapter.aspx

    Open an elevated command prompt > type netsh interface terredo disabled state.

  • Error code 10 updating the Microsoft teredo tunneling adapter driver via Device Manager

    Hi, I have a hp pavillion dv6 with windows 7 64-bit edition. I saw the yellow exclamation point in Device Manager and when I try to update this driver by let me pick up the driver (it says error code 10) or research online (updated driver already installed). What should I do to remove this yellow question mark in Device Manager? Thank you.

    Original title: teredo tunneling adapter microsoft

    Hello Hamdullah,

    Please keep us updated on the status of the issue.

    Please refer to the suggestions of Mohammed Raieed said on January 16, 2010 and check if that helps.
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Microsoft-Teredo-tunneling-adapter/27162f78-d3b2-4A80-8166-b5596ca9fa11

    I hope this information helps.

    Thank you

  • After the upgrade to Windows 8, problem with teredo tunneling adapter says code 10 error and the device cannot start

    Original title: teredo tunneling adapter error number 10 on windows 8

    on my acer travel mate 6292 which I just upgraded to windows 8 pro recently got a problem with teredo tunneling adapter.

    It says error code 10 and that the device cannot start, it made me unable to use wifi on my laptop

    I tried to reinstall the driver but it just says: windows encountered a problem installing and he says its error code 10

    Please help me

    Thanks in advance

    Hi Samuel,.

    We appreciate your efforts to solve this problem. We will put all our efforts in order to solve the problem.

    Teredo is a tunneling protocol designed to grant IPv6 connectivity to nodes that are located behind IPv6 NAT (network address translation) not compatible devices. It defines a way of encapsulating IPv6 packets in IPv4 UDP (User Datagram Protocol) datagrams can be routed through NAT devices, on the IPv4 internet.

    I wish to inform you that Acer has not released Windows 8 compatible drivers for Acer 6292 travel companion.

    I suggest you try to install the drivers for the card wireless in compatibility mode and check if it works. Check out the following link to download and install drivers in compatibility mode.

    Make the programs more compatible with this version of Windows

    http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

    The link below to download the drivers for the wireless card: http://us.acer.com/ac/en/US/content/drivers

    A Code 10 error is generated in the Device Manager in one of the following situations:

    1. the Device Manager cannot start the device.

    2. one of the pilots who needs the unit does not start.

    3 device Manager has sufficient information to recognize the error that spread upwards by the device driver.

    We could try following common resolutions to solve the problem:

    1. update the drivers for this device

    2 launch a service of automated troubleshooting

    3 contact material supplier technical support

    For more information, please see the following article:

    FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

    http://support.Microsoft.com/kb/943104/en-us

    In addition, this article could also be designated:

    How can I troubleshoot network card?

    http://Windows.Microsoft.com/en-in/Windows/fix-network-adapter-problems#1TC=Windows-8

     

    Please answer us on the State of the question to help you further.

  • Why my wife's iPad mini sounds when his phone rings

    My wife has an iPhone 5 and iOS 8.3 an iPad mini iOS 8.3.

    two of these iOS are obsolete, but she does not care until recently when the iPAD rings / when his phone rings and I have not been able to cancel it.

    It is signed in iCloud, but there is no 'other devices' in his phone and the iPad has no preference in FACETIME which I think could connect these two.

    I 9.3.4 iOS on my 6 and ring through my Mac selected as other devices, but these options may not be available for sa/phone/iPad iOS 8.3

    Suggestion welcome, solutions wanted, grateful for any tips or ' how UN-make what seems to have started on its own.

    This is a parameter. On the phone, go to settings > phone > call on other devices and turn off the iPad.

  • Is there a way to open a new window with a site when the House on Firefox setting has several Web sites?

    When you work in Firefox, is there a way to open a new window with a site when the House on Firefox setting has several Web sites?

    Firefox always opens a new window with the home page (s), you must use shift + left click on a link (bookmark) to open a page in a new window or just rip an existing tab by dragging the tab slightly downwards to open the tab in a new window.

  • What does it mean when the Selection tool in illustrator has a small white box or black next to the pointer?  I did a clipping of an object mask and now can't move and selection pointer has small box beside him.  Yet to learn...

    What does it mean when the Selection tool in illustrator has a small white box or black next to the pointer?  I did a clipping of an object mask and now can't move and selection pointer has small box beside him.  Yet to learn...

    When it is over an unselected path or shape (as in, something that you can select if you click right here), it shows a black box. When you're not selected anchor, it shows a white box.

  • The conclusion for M - Audio MobilePre USB driver problem

    The conclusion for M - Audio MobilePre USB driver problem

    Use: iMac

    OS: El Capitan 1011.2

    The latest driver I could find was 1.8.1.

    Error message:

    Installation failed - Setup could not install the software because there was no

    available software

    I would use this hardware with Final Cut ProX 10.2.2 and Garageband 10.1.0.1

    A quick search seems to indicate the latest version of the driver to be 1.2.1 - there was no 1.8.1 I could find. It has been out for more than a year, so no mention of El Capitan, but it could work. I'll make sure that you have the right to download and try again.

  • After you start the computer, I get the error msg: "ProfileCnt.Exe has encountered a problem should be closed.

    After you start the computer, I get the error msg: "ProfileCnt.Exe has encountered a problem should be closed" can someone help me?

    Hello

    Some research suggests that ProfileCnt.exe belongs to a wireless card or

    Ethernet card.

    Work using the boot minimum troubleshooting to identify the troublesome program,

    then uninstall/reinstall this program.

    331769-how to perform a procedure to clean boot (XP & Vista)
    http://support.Microsoft.com/kb/331796

    Alternatively, looking for C:\Program Files for the file ProfileCnt.exe can tell you

    What program is involved.

    Don

  • What is a connection to the network tunnel adapter local?

    tunnel map

    What is a connection to the network tunnel adapter local?

    Hello, Alan Winwynn,.

    Thanks for your post.  If you have a specific problem you need covered?  In the affirmative, please let us know the issue you are facing, so that we can better help you.

    The tunnel of the card, in short, encapsulates IP6 packages with an IP4 header so that it can be sent over a network, IP4, no problem.

    See you soon

  • ADS Instant HDTV PCI has a driver problem. Its used to play through the speakers of HDTV. Now he doesn't.

    I have a Sony VAIO laptop that I have previously connected to a TV high definition using the HDMI cable with success (sound and video broadcast by the TV).

    I use Windows Vista home edition.

    A few months ago, the noise ceased to play through the TV speakers.    I recently used a program of automatic correction of Microsoft and got the following error message: "ADS Instant HDTV PCI has a driver problem.  Can offer you a solution?  Thank you.

    Hello

    See the link below, he talks about the similar issue.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/audio-device-ads-instant-HDTV-PCI-cannot-start/00bb256f-cf91-44A3-8a66-733ad0a4cdfa?LC=1033

  • [Solved] HL-DT-ST DVDRAM GT20L periph. CdRom SATA has a driver problem. The driver faces a problem of Plug-and-Play device.

    Recently, I noticed that my CD/DVD stopped working. He turns, but nothing happens; the disc is not read.
    I use Windows 7 Home Premium 64 - bit on an HP Touchsmart tx2z.

    I ran the Microsoft FixIt program through http://support.microsoft.com/kb/982116 and it has identified the following problem: 'HL-DT-ST DVDRAM GT20L periph. CdRom SATA has a driver problem. The driver faces a problem of Plug-and-Play device. »

    However, FixIt said that he was unable to solve the problem and discs are still read.

    I manually uninstalled the driver in Device Manager and then scanned for the hardware changes. The driver was reinstalled, but with the same problems as before.

    Any ideas?

    Thank you!

    Also, try following the steps for Windows Vista, which should also work in Windows 7, in the MS KB article:

    http://support.Microsoft.com/kb/982116

    These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

    Create a System Restore Point beforehand and restart the computer later.

  • There is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be reinstalled.

    I notice that I need to solve problems for my computer.  The message said: there is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be installed.  One of the options is to reinstall the driver.  I tried, but it did not.  What is this adapter, and how should I do if the error message goes away?

    There is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be reinstalled.
    The device information
    Name: Microsoft Teredo Tunneling adapter
    ID: ROOT\ * TEREDO\0000
    Error code: 10
    Reinstall the device driver
    Completed
    There is a problem with the Microsoft Teredo Tunneling adapter driver. Reinstall the driver may resolve this issue.
    Problem with the PnP devices
    Detected
    There are problems with some devices PnP. Windows will take additional steps to continue troubleshooting these devices.
    It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

    To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

    netsh interface set terredo disabled state.
    To re - install
    1. Click on start.
    2. Type Device Manager in the start search box, and then open it.
    3. Click the Action tab on top and click Add legacy hardware
      then click next and next again, he will then scan and find nothing then click on the screen after that.
      Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it.
      To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.
  • Microsoft Teredo Tunneling adapter not displayed in the window of adding hardware under common hardware Types.

    I have a HP Pavilion P6 desktop computer running Windows7 and in devices and printers , I noticed that my computer has a yellow triangle that relates to Microsoft Teredo Tunneling adapter.  To address this issue, I note that this device is not displayed in the window of adding hardware under common hardware Types, but I listed it in the Device Manager.

    I tried several attempts to reinstal, but not joy.  Can anyone suggest how I can restore this device?

    In the Properties window, it shows a Code 10.  This device cannot start.

    DM

    Tunneling is required only if you have a printer that requires it.  Here is how to re - install if you do

    It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

    To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

    netsh interface set terredo disabled state.
    To re - install
    1. Click on start.
    2. Type Device Manager in the start search box, and then open it.
    3. Click the Action tab on top and click Add legacy hardware
      then click next and next again, he will then scan and find nothing then click on the screen after that.
      Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it.
      To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.
    If there is no option "Add Hardware inherited", you need to connect the unit using the tunneling.

Maybe you are looking for

  • Multiple monitors put in place

    I'm trying to set up multiple monitors on my desktop HP P6674y.  He has the card ATI Radeon4200 Video w / outputs both VGA and DVI on the back, and I'm the undertanding is able to handle this. I have two monitors of AOC 2436vh I tested individually a

  • best practices of command buttons

    Hello I would ask how others view their GUI with several command buttons (OK Boolean button). For example, it is a simple application where the user can start data acquisition by clicking on a button with text 'Start monitoring '. Instead of having a

  • Problem with line graph

    Hello. After two days on a tray to solve the problem, I need your help. I have problem with presentation of the data. Data of growning Aproxx. linear. I read these data from device. Sometimes my .vi does not read data, and in this case my chart have

  • SVG memory leak

    First the necessary info: Dev environment:-Eclipse 3.4.1 + Plugin JDE 1.0.0.67-Components packs: 4.2.1.17, 4.3.0.16, 4.5.0.16, 4.6.0.19, 4.7.0.46, 5.0.0.14-J' I alternate between 4.6 and 5.0 for the most... to reach 5.0, 4.6 for compatibility (and th

  • Cannot delete the folder in Windows 8

    When I try to delete a folder on my desktop it does not work. This is because it is read-only. I have all the permissions on the folder and try to change read-only. When I try to delete it then it becomes read only once I have look at the properties.