When there are several tabs open, why the search always take place on the 2nd tab (first tab seems never to change the homepage) despite my selection of a different tab where to do a search on google?
I have Mozilla Firefox 10.0. When I open it, it opens properly on the homepage in the first tab. Once I have another, or several, tabs opened, any tab is active, your google searches, I immediately takes place at the No. 2. Do not count how many times I go to the tab for example 4 to search (because I would compare with the page Web open in a tab 2), but it does still today the Search tab 2. It's very irritating. It must be a setting that went pear-shaped, but where / who? Any suggestions? Thank you.
Try Firefox SafeMode to see how it works there.
A way of solving problems, which disables most of the modules.
(If you use it, switch to the default theme).
- You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
- Or use the Help menu option, click restart with the disabled... modules while Firefox is running.
Do not choose anything at the moment, just use 'continue in safe mode.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.
If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes
When find you what is causing that, please let us know. It might help others who have this problem.
Tags: Firefox
Similar Questions
-
In general, I have three windows open Firefox, each with several tabs. Firefox itself is pinned to the Windows taskbar. Some of the tabs are set to reload.
The behavior that I find strange is that the window that initially had the means of the taskbar sometimes migrating to the first position. This behavior can be controlled, or the less predicts?
Thank you
Hi Avocet,
I guess this change because it's the last window to load a new page or which has been highlighted. If this happens on one of the tabs autoload, that might explain it.It seems that the other had the same question and had a tweak of operating system: http://superuser.com/questions/680406/how-to-order-windows-of-the-same-pro...
-
outer join when there are several tables are involved
Could not put up the question correctly to the last channel, my problem is with the join when there are several tables are involved, this is just one example of the task that I have to carry.
Tab1 aura model id retailer_id information for all the weeks (from the first Monday) of the month of JUNE with cost and Helen
Tab1
model_id
retailer_id
sell_date
cost
Helene
1
12
June 3, 13
100
40
1
12
June 10, 13
200
20
1
12
17 June 13
300
20
1
12
24 June 13
400
20
2
12
June 3, 13
300
10
2
12
June 10, 13
200
20
2
12
17 June 13
300
20
2
12
24 June 13
400
20
Tab2:
each retailer belongs to a dealer, under the table has the same information
retailer_id
Dealer_id
12
100
13
100
14
101
15
101
16
101
Tab 3
There is a third layer where each dealership is having a garage band
Dealer_id
Dealer_group
100
1001
101
1001
102
2001
103
2001
104
3001
105
3001
Tab4:
Of this table for each model and dealer discount information for the month of June (every week)
model_id
Dealer_group
discount_date
discount
1
1001
June 3, 13
10
1
1001
June 10, 13
20
1
1001
17 June 13
10
1
1001
24 June 13
30
2
1001
June 3, 13
10
2
1001
June 10, 13
20
2
1001
17 June 13
10
2
1001
24 June 13
30
3
2001
June 3, 13
10
3
2001
June 10, 13
20
3
2001
17 June 13
10
3
2001
24 June 13
30
Master_info:
It's the main table which is the master table for model /retailer information
Model_id
retailer_id
1
12
2
12
3
12
4
12
1
13
2
13
Output
model_id
retailer_id
sell_date
cost
Helene
Final (cost-helene-discount)
1
12
June 3, 13
100
40
50
1
12
June 10, 13
200
20
160
1
12
17 June 13
300
20
270
1
12
24 June 13
400
20
350
2
12
June 3, 13
300
10
280
2
12
June 10, 13
200
20
160
2
12
17 June 13
300
20
270
2
12
24 June 13
400
20
350
3
12
June 3, 13
0
0
0
3
12
June 10, 13
0
0
0
3
12
17 June 13
0
0
0
3
12
24 June 13
0
0
0
4
12
June 3, 13
0
0
0
4
12
June 10, 13
0
0
0
4
12
17 June 13
0
0
0
4
12
24 June 13
0
0
0
1
13
June 3, 13
0
0
0
1
13
June 10, 13
0
0
0
1
13
17 June 13
0
0
0
1
13
24 June 13
0
0
0
2
13
June 3, 13
0
0
0
2
13
June 10, 13
0
0
0
2
13
17 June 13
0
0
0
1
13
24 June 13
0
0
0
For highted above records (model_id / retailer_id combination) there is no record in tab1 but they have entered in master_info then the recordings should come for all model_id/retailer_id with all the 0 values
Hello
Thanks for posting the sample data.
It is unclear what dates you want to include in the output. The following query shows how you can generate every Monday in a given range. If you only want to include the dates that are actually present in tabl1 and/or tab4, you can simplify this a bit.
WITH date_range AS
(
SELECT TRUNC (TO_DATE (' 3 June 2013', 'DD-Mon-YYYY'))
, 'IW '.
) AS first_monday
, TRUNC (TO_DATE (24 June 2013 ', 'DD-Mon-YYYY') + 6)
, 'IW '.
) AS last_monday
OF the double
)
all_mondays AS
(
First_monday SELECT + (7 * (LEVEL - 1)) AS sell_date
OF date_range
CONNECT BY LEVEL<= 1="" +="" (="" (last_monday="" -="">
/ 7
)
)
SELECT mi.model_id
mi.retailer_id
am.sell_date
, Cost of NVL (t1.cost, 0) AS
, NVL (t1.rebat, 0) IN the refund
, NVL (t1.cost, 0)
-(NVL (t1.rebat, 0))
+ NVL (t4.discount, 0)
) AS final
E master_info
CROSS JOIN all_mondays am
LEFT OUTER JOIN tab1 t1 ON t1.model_id = mi.model_id
AND t1.retailer_id = mi.retailer_id
AND t1.sell_date = am.sell_date
LEFT OUTER JOIN tab2 t2 ON t2.retailer_id = mi.retailer_id
LEFT OUTER JOIN tab 3 t3 ON t3.dealer_id = t2.dealer_id
LEFT OUTER JOIN tab4 t4 ON t4.model_id = t1.model_id
AND t4.dealer_group = t3.dealer_group
AND t4.discount_date = t1.sell_date
ORDER BY mi.retailer_id
mi.model_id
am.sell_date
;
The results are not exactly what said you you wanted. I suspect it's because of typos in that you posted.
-
You cannot change the chart value axis when there are several types of graphics in a single diagram
Illustrator can do graphics with bars and lines / columns, for example in the docs:
http://help.Adobe.com/en_US/Illustrator/CS/using/WS3f28b00cc50711d9fc86fa8133b3ce158e-8000 .html
However, when I create a chart like this, I seem to lose the ability to manually set the y-axis using 'override calculated values.
To reproduce this problem:
- Create a chart as in the example, with bars and an axis on the left, lines and an axis on the right. Unlike the example, don't fix the numbers as well as the lines align perfectly - have a go until just less than 20, a up to a little less than 250, therefore it do not markers and the number of divisions on each side.
- Try to make the markers and numbers of divisions to the height, so in fact, the side that is going up 20 going up to 25 and has the same number of divisions on the other side.
Everything I have tried does not work:
- If I select the entire chart and go to the "Chart Type", I can not set the options for the value axis. In earlier versions, it's gray, in CS6 I can access, but clicking on 'OK' does nothing.
- If I select the entire chart and chose the type of a chart, I can set options for the axis value, but that the selected chart type, and then applies the entire table.
- If I use the direct Selection tool to select one of the series and open the "Chart Type" options, changing the options of the y-axis has no effect
- If I use the direct Selection tool to select all series that share an axis and open the "Chart Type" options, changing the options of the y-axis always has no effect
- If I use the direct Selection tool to select the Group of ticks axis itself, or the axis line and groups of ticks axis themselves, of axis labels, axis and graduations of the axis line, or axis labels, axis line, graduations of the axis and series of related data, etc., by changing the options of the axis also has no effect
It seems that this feature is broken and it seems that the example in the manual has been carefully chosen to use a rare combination of numbers where it would actually look right.
I thought about it. Like everything to do with the horrible ancient neglected graphic Illustrator tool, it is ridiculously clumsy and involves the caution around what is shamefully bad programming for a professional expensive product.
It is timing - to do things in a sequence of rigid counterintuitive that seems not to work then meets at the end:
- Create the chart but, for now, keep all the same chart type. If you've already set to have different graphics types, put the same thing for now.
- Select the entire chart and in the main window of Chart Types, set the value to "Both sides" axis
- In the drop-down menu, there should be a left and right axis (or top and bottom...). Set the parameters of the value axis for these now. It will look like it does for a single axis, because it will not change the other axis - naked with her...
- Select the data series you want to use the other axis using group selection. Go to graph Type and the value of the y-axis to the other and set the chart type that you want. All of a sudden all be put in place.
- If you need to change the settings for the value axis, select the entire chart, set the whole chart type to a chart, change the appropriate value axis by choosing it from the menu drop down and the re - apply types of graph as above.
(the bug is - it should not necessary to set the graphic object to only have only one chart of type in order to access the axis options of value for two different y-axis)
-
Paste a shape as a mask when there are several layers?
I have a couple of layers that I applied the auto vector command in order to hide. I want to now draw a rectangle rounded on part of my canvas, cut this rectangle with corners rounded and right-click on the drawing area and choose Edition > paste as mask, so the picture will be revealed due to the rounded rectangle shape. It works with a single layer, but now that I have several layers and masks vector auto I don't know which image/layer for click straight on and do with?
Thanks for any help.
Instead of cutting the rounded rectangle, leave it at the top of the stack of items, select all three objects, then select Modify > mask > Group as mask (or you can right click to select the group in the mask). This command will apply the object higher in the selection as a mask for the items below.
-
Why the start window does not decrease when there are several results, and I want to check each?
Is there anyway of peacekeeping beginning box upward? By doing a search, 8 elements came, I right click the first to 'open', the start box breaks down the jpg couldn't be displayed (God knows why or where it is!) so I have to click on start and type in the search had once AGAIN, do it with all 8 icons... come on Microsoft all new fandangled stuff you've added and you assume if 35 things go up the first I click is the one I am you are looking for?
Faster we go, the behinder we get. Seems the more glitzy junk that is added, 'user-friendly' things common sense falls through the cracks of geek.
Windows 7 and Office 2010 have made me really want to do not use a computer... I have a business online (successfully) and uses a computer for 18 years. This "not compatible" nonsense, "is no longer supported" is just this absurdity. It's as if they're building a new road in your area, well you have to buy a new car! If they come out with new TV shows, you will need to buy a new TV. That Microsoft is not? The upgrade is good but forcing me to give up what I love and know you is crazy, boring and very discouraging.
Ruth Niles
Hi Ruth Niles.
I suggest you run search and convenience store Index and see if that helps.
Open the troubleshooter for search and indexing
http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-TroubleshooterHope it will be useful. Incase if you still have any other queries please respond with more details and we will be happy to help you.
-
Question about starting EM when there are several homes
(Oracle 11 GR 1 material, Windows XP SP2)
Hello
As an exercise, I have two databases in separate, houses called db_1, and db_2.
When I try to start the EM console, I get the following message:
I set the ORACLE_SID correctly to DBCASID, but he is looking in the wrong directory. I set ORACLE_HOME, but that has not solved the problem.emctl start dbconsole OC4J Configuration issue. E:\Oracle\app\Private\product\11.1.0\db_2/oc4j/j2ee/OC4J_DBConsole_OrahostB.john.local_dbcasid not found.
I can start the service using the Windows Services Console successfully, but I would like to know if it can be done using EMCTL and if so, how.
Question: How can I tell emctl how I want it to look at?
Thank you for your help,
John.
Published by: 440bx - 11 GR 2 on 8 Sep, 2010 11:04 - deleted some jive "junk" in the text of the codeBy setting variable named PATH.
It must contain the path of the correct ORACLE_HOME in the place of leader bin directory into the PATH variable.
Concerning
Anurag -
My computer has Windows 7 and Acrobat Reader DC. When I open a PDF sent there are several fonts instead of one. The only difference I can find is 'Properties - font - Arial - Type of the actual is of Type 1 fonts' instead of 'TrueType '. If this is the problem, how can I change the Type 1 for TrueType, and if not, what could be the problem and the fix?
It cannot be resolved with Reader. Sounds like an issue that will be attached to the end of the creation of embedding fonts.
-
I opened firefox there are 2 tabs and a banner beneath them that says "mozilla firefox is free software and open source of the Foundation not-for-profit mozilla." I clean everything before I use the browser. Whenever I change my STARTUP "homepage" when I close the browser and open it again it all boils down, nothing changes. What is the problem with firefox?
This has happened
Each time Firefox opened
Is a week ago
Perhaps the solution to the Firefox says it's just updated each time that it starts - how to fix will work for you.
-
Display of training "open goal" app to view 3 numbers at the time. Now, there are only 2. Why apple changed the display of training app?
Hello
If you prefer to see your distance goal, the calories or the time displayed as a number instead of as a ring of progress:
-On your iPhone, in the application of Eve, go to: Watch My > Workout - turn on show metric goal.
More information:
-
I have an iMac (2015). When I open Garageband, there are only two buttons on the control bar, play and stop. No record button, rewind or ff. Where are they and how can I make it appear?
Try to enlarge the GarageBand window by dragging the corners of resizing.
If she looks like this, your window is small:
You can also try to click the double arrow at the end of the toolbar to reveal more options.
-
I bought a new computer. When I try to send an e-mail to multiple recipients, now, I get this message: "there are non-ASCII characters in the local part of the address of the recipient. It is not yet supported. If please change this address and try again. "I don't know what are the non-ASCII characters, so I don't know what to do. I never had this problem on my old computer. Please explain in simple language.
The 'local' part in the context of email addresses, the part to the left of the symbol @. The warning is a bit of a surprise, because in general the owner of a mail server is relatively free to specify the address format. There is a movement to allow the games to other characters to be used in the fields, so I'm a little disappointed to see that, apparently, e-mail does not support the latter in the local part yet or it can be your SMTP server that generates this message.
ASCII characters ("American Standard Code for Information Interchange") are, on the whole, the English alphabet, uppercase and lowercase, as well as figures, common punctuation and case of things like the asterisks, obliques and media bars, but not of accented characters. But even apparently simple things like spaces and dashes have cousins who, at first glance, appear to be identical, but are not represented in the ASCII system. I am thinking especially nonbreaking spaces, dash and half-quadratin.
But I don't know why your new computer must have caused these warnings.
-
There are several people who might want to use Thunderbird on a work computer, but I don't like how all the e-mail files are open to the public view. It looks like anyone can see the emails without having to log on the account of others.
It is regrettable indeed, and I don't think it's a good idea.
You can opt for individual profiles, but this doesn't quite work for multiple users. -
I downloaded a program called Styler which changes the appearance to look like Windows 7 or Royal themes. It worked fine for the first days, until that day when my laptop could not start after hibernation, so I hard-rebooted, and the horizontal size of the taskbar button is too small. I tried to restart, change the appearance back, locking/unlocking/resizing of components of taskbar. I wish I could send a screenshot. Yes, I have these vertical bars displayed and all, and no, they do not change it. I use as a separate program called AlienGUIse Alienware, which has not had a problem in 2 years, I got it, and it didn't fix it either.
Why I say that it is as if there are many buttons clutter is the "group similar taskbar buttons" function. I figured out how to put the picture of the problem in my profile to do this, click on it.
Someone has replied
a system restore point worked!
-
Previous/next buttons in Windows 7 Media Player 12 disabled when there are videos in the playlist
original title: Windows 7 Media Player 12 previous/next buttons disabled when there are videos in playlist works well with music files
I have 3 computers to windows 7 that all exhibit this same problem.
I have playlists since older versions of media center and when I play a video playlist with the previous buttons and next player will be disabled. If the playlist has audio files it next and previous buttons work fine.
It has always worked in other versions I know that it is a feature I use all the time so I would have noticed
Hi keith278,
You can use Windows Media Center to play your videos.- Click Start
- In the Search box , type Media Center
- Click on Media Center
- Select the photos + videos (you should see the library of images, Favorites, play and video library)
- Select the video library
- Cross the guests to add your video to this library folders
- Double-click the video file you want to play
- You should see the possibility of play all the
Let us know if that helps.
Maybe you are looking for
-
I.Can.place.a call
-
Timing of a State Machine in the States
Hi LabView community. I'm running a state machine (attached) in which I want to measure the duration that the VI is running in several States. The VI is used to take spectra of power of various samples. My scheduled execution goes like this: the user
-
We try to add a drive on our new TD350 to a RAID5. This was previously created and works very well. There are two additional disks available. How can we add those toes RAID5. We find no option in Deployment Manager. Or we found no documentation on th
-
the computer not lee el device pues lo muestra como retribution y no encuentra los contraladores este mismo
-
I RECEIVED AN EMAIL WITH AN ATTACHMENT, I DON'T HAVE EXCEL, WHEN I TRY TO OPEN IT IT ME SAID TO CREATE AN ASSOCIATION IN THE CONTROL PANEL FOLDER OPTIONS HOW TO OPEN THIS PDF FILE AS THE EMAIL TOLD ME? WHAT IS PDF? THANKS FOR YOUR HELP!