When updating vista on laptop to the service pack 2 does not update
We get an error 8024200d
and it fails to install the update, how do I fix for my sister
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
[Error 0 x 80070002; 0x8007000D; 0 x 80073712; 0x800b0100; & 0x8024200D]
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Connected to the new router, but locally only.
Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)
I can connect if I use a cable, but its disadvantages.
I can connect wirelessly with my PC and Ipad. and Internet access.
Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »
Thank you in advance and we hope you can answer this soon!
I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.
You can check out the link to HP support and try to download the drivers for your wireless card updated:
For more information, you can also consult the following article:
You can also check the following items and try the steps:
Hope this information is useful.
service pack 3 does not due to kbdhid.sys in use, I was updating after a repair windows, service pack 2 is installed, but the service pack 3 will not get spent about 1/2 in point because it says the kbdhid.sys open or currently in use, and there is no way to remove or stop in sys.32 drivers as it says it is used and there seems to be no way of knowing What to use.
I suggest you to follow the steps in this link and check if it helps: http://support.microsoft.com/kb/949377
Also check out this link:
It will be useful.
My roommate has downloaded a manual from LG Electronics cell phone in format .pdf (Adobe). The download is complete on Firefox. It double click on the download finished in the 'Download', its pc box became very slow and finally frozen. It is running Windows XP Media since 2004 / 2005.
When it tried to reboot, the following message appeared...
"... isass.exe system error indicates an encountered or specified revision number is not one known by the service." Continues it's maybe a more recent revision, then the service is aware of... »
Then will continually attempt to restart. by a failure. Note the sequence of the events above are as accurate as the harshness.
Does this mean the registry is damaged?
Ran Iolo System Mechanic and has been able to run the tests in two (2). One of the physical drive and the other to the integrity of the partition. Nothing helps. A ran Norton recovery and found no errors. Performed a chkdsk /r and no mistake. Ran a chkdsk/p and found errors, but was not fixed. Any suggestions about where to start?
I would like to thank all those who helped in my installation of Windows 8 Preview of consumer. He didn't find any problems of incompatibility with Norton a few months back and HP support said that the hard drive has been ruined, and I had to buy one of them after receiving the disks to install Win 7 again. Instead, I have used Drive Scrubber from Iolo System Mechanic and installed Win 7 perfectly. I'm now back with Windows 8. ALL of you are awseome!
Try to start in last know good confriguration pressing f8
I get a notice that reads, "The Service Audio does not work", but I still get audio. That is what it is?
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: I receive a notice that reads, "The Service Audio does not work", but I still get audio. That is what it is?
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
1. did you of recent changes on the computer?
First of all, make sure that the Windows audio service is running on the computer.
a. open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
c. right click on Windows Audio serviceand then click Properties.
d. under the general tab, next to startup type, make sure that Automatic is selected.
e. also make sure that the service is started
If there is still no sound after you enable the Windows audio service, then check out the link below and run the troubleshooter and check if it works.
Tips for solving common audio problems
If the previous step fails, then you will need install the latest audio drivers on the computer by visiting the sound card manufacturer's Web site and check if it works.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Note: visit the manufacturer's Web site to download the latest audio drivers
Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.
WMP does not play automatically when a disc is inserted. How to bring back this feature
1. did you of recent changes on the computer?
2. what happens when you insert a disc in the drive?
See the Microsoft article below and try the steps mentioned, check if it helps.
The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive
Recently, I took out my old laptop. Windows XP 2002 Service Pack 2. I was using internet just fine, then when I went to a Web page (don't remember now).He said that my computer needed update to IE 7 to the support page. I tried to load this (update) over and over again withno luck. Then I lost internet all together. He said it was impossible to load it and said to go to www.//go.microsoft/fwlink/?LinkID=106440. This address has not yet been loaded.I did extensive research on the question/answer of windows page.What can I do to make it work again? I still have a lot of memory etc left on the computer.The biggest problem is that I have NO internet now on this old PC, to do something about it. I use my laptop more recent to askThis question.Thank you for your help :)Jennifer
1. do you get an error message?
2. what happens when he tries to open Internet Explorer?
You can perform the steps mentioned in the link below
How to troubleshoot network connectivity problems in Internet Explorer
You can check this link:
Windows wireless and wired network connection problems
It will be useful.
Windows Update says that our computer requires Service Pack 3. However, after about 70-80 MB or more very slow laborious effort he stops and tells me that download has failed. The same thing happens when you try to load the update Garmin map that need Net Framework 4 - it's just too hard for her. I tried mutual aid run Mr Fixit solutions [who proudly says he fixed three different things and installed Powershell for me] and also do a clean boot manually. They have produced no benefit at all. Any advice would be welcome.First of all, make sure that you have enough free space on your hard drive: http://www.winhelp.us/index.php/windows/enhancing-windows-performance/free-up-disk-space-in-windows.html
Can download SP3 from http://www.microsoft.com/en-us/download/details.aspx?id=24 and run it.
Well, then I begin to learn more and more programs want upgrade you all the way to service pack 2. WELL, I HAVE EVEN 1 YET. Because it won't work on my computer! I've tried everything. I get the error Code: 800736B 3. I have Windows Visa family premium, it came WITH my computer and I had a few years back so I do not remember if a CD came even with it. I have no idea what to do and I am so incredibly frustrated. Please HELP :(
Well, you're really between the proverbial rock and hard place here, my friend.
Norton 360 v5.x (AKA Norton 360 2012) will not install unless & until the Vista SP2 is installed - and you can't even get installed SP1 (because the free trial period of Norton had expired because you have never run the removal tools when appropriate or because of your misguided use of registry cleaners).
All that being said, your best bet now is to format the hard drive and then do a clean install of Vista. [Note: a repair installation will not fix this!]
See the poster in this thread and follow the instructions of (my) WHOLE (to-the-letter and in order! ) to restore your computer to a State safe & functional: http://answers.microsoft.com/thread/c44429fb-3f7c-4646-8529-5a97bb3cd0eb
If you need assistance with the clean install, please start your own, new topic in this forum & advice: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system
If the procedure is outside your technique "comfort zone" - and there is no shame in admitting this isn't your cup of tea - take a local, the good reputation of the computer and independent computer (that is, not "BigBoxStoreUSA" or Geek Squad) repair shop & let them do the work.
Note: The computer must NOT be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.
Wish I had better news for you. Good luck!
I admit that I suck at the implementation of wireless networks and I am a silly when it comes to Mac and compatibility, so bear with me.
I have configured my WRT54GS router dated in our apartment and it connected very well with my desktop running XP. I set up the WEP keys and gave it to my roommate so that she could access as well. She's on a new Mac laptop. She typed in the key correctly (the key worked for me) and she gets only a message "cannot connect". No error message, just that the connection has failed. My office is running on wireless too (the LILY is in the living room) so I tend to think that this isn't our DSL modem or the router.
I have to install LELA on his laptop so he can connect? If so, can I download the driver from the website? In addition, what its firewall blocking the connection?
Readjust the settings of your router Wireless:
Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
For wireless settings, follow these steps: -.
Click on the Wireless tab
-Wireless network mode must be mixed...
-Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...
-Set the channel 11-2 wireless, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
Please take note of the name of the wireless network (SSID) because it's the network identifier...
For wireless security: -.
Click the sub-tab under wireless > Wireless Security...
Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
Please note the 1 WEP key as it comes to the security key for the wireless network...
Click the settings advanced wireless
Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
Now let's see if you can locate your wireless network and try to connect...
When I install adobe flash player, I get a bar that goes into the top of the page: install missing plugins. When I press on it for the missing plugin, it does not work and instead it shows manually to install the plugin. But this does not really work.
Adobe flash player will not update.
This has happened
Each time Firefox opened
== I want to update and install adobe flash player
I hope that this support article is what you need:
If you need additional assistance, please contact Adobe.
When I connect my computer to the Netgear router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access.
I have both a laptop and a desktop computer and use a modem wired high-speed internet. I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...
Original title: router does not work...
Welcome to the Microsoft community.
I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.
You must contact the ISP to verify if they can help you with this question.
In addition you can keep these items handy, it might help you.
Set up a wireless router
Install or remove a modem
Change modem settings
It will be useful.
If you need help with Windows, let know us and we will be happy to help you.
I tried several times to install the service pack 1 update on my Vista 64 bit system. It is always fails and gives me the error 66 has code. When I click on using this code I get nothing.
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
The Adobe Connect Add-in crashes when I try to share the screen (office) in Windows Vista Home Premium (32 - bit) Service Pack 2. I get the error message with the title "Adobe Connect Add-in has stopped working". The message said: "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. "The only button I can click on is"close the program ". I made sure that the screen resolution is a multiple of 16 ("1280 by 768 pixels"), as this article says. I use Adobe Connect 9 with the 'named price model host. Does anyone have the solution to this problem? Thank you.
Do not know what could cause the problem, but Vista is not an operating system, for what it's worth.
I suggest that you uninstall and reinstall the Flash Player and see if it helps Uninstall Flash Player | Windows.
It looks like not the resolution of the screen is the problem, as you mentioned, it should be something else. I would also recommend that you check your video drivers to see if there is an update, because who could help.
for explorer 8 I get a message saying that I'm missing so he can install updates but it does not say, for service packs of the automatic update system not even displayed the
Start with Service Packs and then worry IE8 after that.
Start here: Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
TaurArian [MVP] 2005-2010 - Update Services
Maybe you are looking for
Hi, I was wondering if someone can help me solve my lag in Left 4 Dead 2. I have a fps in means of 10 to 20 of the cards. I run on the lowest resolution, more small settings and even tried using files that help with the lag. I don't have this problem
Why the following applescript does not produce the result "c"? the value xxx to 'ABC' as string the x value of delimiters to point to the text of the AppleScript the text value of the AppleScript point delimiters ".» return the word 3 xxx the text va
Rookie X Logic Pro here - I have this problem, but not all the time, but each successive take is exactly 1/4 measure delayed the previous and out of sync with the runway, I add my track to.
So, you need to print an image and text below, but you don't want to waste the ink for the entire page? Use the command: command + shift + 4 This command will allow you to make a selection on a page to print. It will then export an image on your desk
Photos modified in Photoshop then saved, PhotoShop or Mac doesn't give the photo a file extension, and these files can not reopened.I use a mac with PhotoShop CC and have experienced a problem during the recording of pictures once I've retouched in P