When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

Similar Questions

• Turning or turn off the features on my HP computer that has Vista Premium 64-bit; you need the original settings?

  I need the original settings for the correct positions of what blanks or who checked;  I tried to solve a problem with the installation of turbo tax and had problem with .net 3.5? -made some changes and now my printer is not working and so on!  I just want to put them back where they should be;  I bought the Windows 7 upgrade, but I'm afraid to try to install it before you can resolve this problem.  Help?

  This is a general guide to the features of the program & http://www.vistax64.com/tutorials/181884-programs-features-disable-enable.html

  If you have a real cd MS Vista you can allways repair your installation.

• When installing FF7, I clicked Yes to the "do you want to send info back to the developers on the use of memory etc." and now I want to no longer send information as his gel my browser then how do I disable that?

  Question
  When installing FF7, I clicked Yes to the "do you want to send info back to the developers on the use of memory etc." and now I want to no longer send information as his gel my browser then how do I disable that?

  See:

  • Firefox > Preferences > advanced > general: system default: 'send performance data '.

• When I lclick on a link and try to open it, a bunch of scrolling of the empty tabs at the top.

  When I lclick on a link and try to open it, a bunch of scrolling of the empty tabs at the top.

  Hello

  (1) do you use Internet Explorer to browse the web?

  (2) what version of Internet Explorer is installed on the computer?

  If you use Internet Explorer as you web browser, then try the following and see if it helps.

  Method 1:

  Use Internet Explorer in no add-on mode and check the status.

  (a) click Start.

  (b) click on all programs.

  (c) click on accessories.

  (d) click on system tools.

  (e) click Internet Explorer (No Add-ons).

  If this resolves the problem, follow these steps to isolate the browser add-on that is causing the problem:

  (a) click on tools and then click Internet Options.

  (b) click on the tab programs and then click on Manage Add-ons.

  (c) click an add-on in the name list, and then click on disable.

  (d) repeat step c until you identify the add-on that is causing the problem.

  If this is the problem, this could be caused by an adware installed as add-on, see:

  http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

  Method 2:

  Optimize Internet Explorer.

  http://support.Microsoft.com/kb/936213/no

  Note: when you reset Internet Explorer settings, all modules and customizations are disabled, and basically, you start with a new version of Internet Explorer

• If I use the SSD to initiate the operating system and a hard disk of data what exactly will be the benefit of this end?

  Hello

  I would like to know if I use the SSD drive for the operating system boot and a hard drive for data. What will be the benefit of this effect,

  I know that SSDS starts much more quickly and reads and writes data faster.

  When I use the SSD for OS then my only wil advantage so I have faster from the OS, not more than

  but the reading and writing data wil either by the hard drive so I wil not use all the benefits of the SSD, data wil be read and written by hard drive!

  Am I right or wrong?

  Johan

  SSD benefits for most of the time of loading, and it is for all software. If you install Windows on a SSD and return to a HARD drive after a few weeks you will certainly appreciate the value of an SSD, just for the

  only the loading.

  While startup in Windows is the most obvious, the Windows advantage is usually a bit snappier

  on an SSD.

  An SSD expected to also help in many programs such as Photoshop, video editing, the processing speeds

  or CAD, due to data being created during the writing of these programs.

  I think the reads and writes more visible with large files.

  All my programs are on the SSD, but my games are on the HARD disk.

  Games to load a large number of data and will load faster on an SSD, but it's still a few seconds.

  and as games use a lot of Go, it is not really profitable to keep (150 +) on an SSD.

  -J' I keep most of my data, except the music (to save space) in my user folder, but haven't really

  noticed a difference in speed when opening a data file, such as a Word, PDF, images, or similar

  'small' files from the HARD drive.
  -I wouldn't take an SSD less 120 GB. Try to run Windows on a 60GB translate too

  stuffing autour with management of data between the SSD and HDD. In particular, as it should be

  keep 20% an SSD free to allow the two "garbage collection" and deliver a load of

  cells of extra memory to extend the life of the DSS (data gets moved to empty cells when the cells die).

  There is also a noticeable difference between the speeds of SATA2 and SATA 3 controller, so if your motherboard uses the SATA2 more the advantage of an SSD is not as great as with SATA3.

  In addition, the new SATA3 SSD controllers are faster than those of two years ago.

  SSD is a big enough topic. There are many items in the wild that may be useful.

  .

• I have an Acrobat 9 pro I want to reinstall on acomputer that has been reformatted. the serial number I have does not work. I talked to your support on the phone and was told to contact you. Help! Thank you Beni

  I have an Acrobat 9 pro I want to reinstall on acomputer that has been reformatted.

  I have the serial number: [deleted by Moderator] does not work.

  I talked to your support on the phone and was told to contact you.

  Help!

  Thank you

  Beni

  b. sagi

  Please, do not share your serial number on the public forums.

  Also confirm you are correctly using the serial number, serial number Adobe contain 24 digits.

  Once you have found the correct serial number, see links below

  Error "invalid serial number". Acrobat 9 | CS4

  Error "serial number is not valid for this product". Creative Suite

  Invalid serial number error

• How can I eliminate the undesirable bookmarks in the bookmarks on MAC bar, I use firefox 4.0.1 and previous version Ff 3.6, I had to organize the button bookmark on this version I have no

  How can I eliminate the undesirable bookmarks in the bookmarks on MAC bar, I use firefox 4.0.1 and previous version Ff 3.6, I had to organize the button bookmark on this version I have no

  Organize bookmarks is now labeled display all bookmarks.

• I use Origami as my screensaver and changing images quickly, is there a way to slow the progression from one slide to another?

  I use Origami as my screensaver and changing images quickly, is there a way to slow the progression from one slide to another?

  Check in system preferences > Desk Top & screensaver:

  

  Ciao.

• Windows Fax and Scan-do can't fax any type of attachment "the message could not be sent. These data are incorrect. »

  Original title: Windows Fax and Scan is unable to fax any type of attachment

  I am trying to send a PDF using Windows Fax and Scan Ver 6 Build 6002 SP2.
  I get "the message could not be sent.  These data are incorrect. »
  I can send a cover sheet, or something typed into the dialog box, so the modem works fine.
  The problem is with an attachment to a fax.  Tried to PDF, DOC, ZIP, JPEG, and TIFF.
  I found lots of posts with the same problem, but no solutions or problem.

  Windows Vista Business SP2, Adobe Acrobat 9 Pro using

  Just ran the SFC system (C:\windows\systems32\sfc/scannow) and repair files corrrupt.  WF & S now works well when you attach files.

• Is there a delay in the signal when using Bluetooth on any iDevice and, in particular, on an iPad Pro?

  I am using Bluetooth involved in the use of music made a software with sounds of digital instruments using a musical keyboard hardware connected via the USB cable to Lightning to play sounds from the app on my iPad Pro.

  When I try to use a Bluetooth speaker source, there's a 1-2 second delay when I play a chord in the app and when the sound is played through the Bluetooth speaker.

  This delay IS NOT the case when I use just the iPad Pro speaker on when I am attaching some small travel speakers to the headphone jack of my iPad.

  Only when I try to use my Bluetooth speakers sounds better.

  I use a keyboard master Korg MicroKey Air uses the USB port play their own Korg music make its app module.

  Someone who makes music on an iPad with this problem at all?

  Is this a problem question Bluetooth and/or iOS?

  My iPad Pro isn't very strong using these apps do and travel speakers I use plugged into the headset jack music are a little better on the volume, but tend to deform when I try to increase the overall volume level.

  I intend to put this issue on the web forums for Korg, but want some answers from anyone who has been playing and recording music on their iPad using an external keyboard to play and record music in an app to do the music.

  Also, (and I intend to ask this in the GarageBand for iOS forums) can the iOS version of Garageband output sound on a Bluetooth speaker and quietly delay, too, that I can not get the iOS version of GarageBand to sound output via Bluetooth to a Bluetooth speaker.

  Hi, MichelPM

  According to the used speaker, he will always be * some * delay when using Bluetooth to stream audio from an iOS device (or practically any device BT also) through a Bluetooth speaker. I have a Bluetooth speakers system cheaper that I use with my iPad mini 4... I pretty much use it only to listen to sound. If I try and use it for Pinball iOS games I play, there is a delay of environ.5 second anywhere, I'm the speaker. Exactly same phenomenon occurs with the keyclicks when you type it on the iPad keyboard... 5 second delay & even with some applications of synthesizer iOS that I use (Animoog & Arturia iSEM). I think it's just the nature of the beast of Bluetooth.

  Higher quality speakers would be better, but I'm not spending more money to find out.

  If you want an immediate response with zero real audio keypress delay, I fear, the only way to do this is to use a wired speaker.

• When using my computer, all applications and the windows are closed at the same time, got disconnected and the computer turns off as if someone stops manually.

  Original title: it's a virus that's causing this?

  It happened a few times now. While I use my computer, all applications and the windows are closed at the same time, I am disconnected and the computer is off, as if someone manually stops the computer. I turn on the computer and log in and everything seems to be okay. No data deleted, not that I could find and detect anyway. One day when I turned on the computer, it run chkdsk before doing the usual startup. I use the computer for 2 years and this is the first time, she never did a chkdsk on its own. I used Microsoft Essentials and no viruses were found.

  Should I worry?

  Hello

  You can read the following article and try to download the Microsoft Safety Scanner and perform a full scan on your computer and check.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Check if there are logs of events related to the issue in the event viewer which may help us to solve the problem of the:

  What are the information contained in the logs of the event (Event Viewer)?

• Major Photoshop lag when using ATI Radeon HD 5770 and Yosemite

  I have a Mac Pro early 2008 running the ATI Radeon HD 5770 (recommended by, purchased directly from Apple). Since the installation of Yosemite my CC 2015 (or 2014) Photoshop has become excruciatingly difficult to use because of the major lag. I get the spinning beachball after almost every order using a brush or eraser (15 seconds or more of delay). I did a clean install of Yosemite and always have the same question. In Mavericks, Photoshop CC 2014 worked perfectly without any lag.  I adjusted the performance parameters in the pane of Photoshop preferences without success (Advanced Graphics Processor settings Basic), Normal and advanced without success. Does anyone have any ideas or recommendations how to fix this problem?

  If your Mac makes a video card, then this is a way out. Apple is promising El Cap will address the issues of speed of Yosemite, then maybe who will take care of him if you don't mind the wait. Adobe works with them about it.

  Gene

• AF:inputListOfValues sets the value of the first item in the result set when using enter key or tab and component value autosubmit = true

  I use JDev 11.1.1.6 and when I type in a value in an af:inputListOfValues element and press enter or the tab key, it will replace the value I entered with the first element in the set of results LOV. If enter a value, simply click on the component af:inputListOfValues it works correctly. If I use the popup and find a value it works properly as well. I have a programmatic view object that contains a single transitional attribute (this is the view object that is used to create the list of the components of the value of) and then I have another object from view based on entities which defines one of its attributes in a list of the attribute value. I tried to use a base object view of entity to create the LOV to and everything works as expected, so I don't know if this is a bug when using programmatic view objects or if I need more code in the VOImpl. In addition, it seems after that first of the value being replaced by the first value in the result set that it will work correctly as well. Here are some excerpts of important code.

  Also, it seems that this does not work only if the text entered in the component af:inputListOfValues would have only a single game, returned in the result set. For example, given the result defined in code: Brad, Adam, Aaron, Fred, Charles, Charlie, Jimmy

  If we get into Cha, the component works as expected

  If we register A, the component works as expected

  If we get Jimmy, the component does not work as expected, and returns the first value of results IE. Brad

  If we get Fred, the component does not work as expected, and returns the first value of results IE. Brad

  I also checked that I get the same behavior in JDev 11.1.1.7

  UsersVOImpl (programmatic view with 1 transitional attribute object)

  import java.sql.ResultSet;
  
  import java.util.ArrayList;
  import java.util.Iterator;
  import java.util.List;
  
  import oracle.adf.share.logging.ADFLogger;
  
  import oracle.jbo.JboException;
  import oracle.jbo.server.ViewObjectImpl;
  import oracle.jbo.server.ViewRowImpl;
  import oracle.jbo.server.ViewRowSetImpl;
  
  // ---------------------------------------------------------------------
  // ---    File generated by Oracle ADF Business Components Design Time.
  // ---    Wed Sep 18 15:59:44 CDT 2013
  // ---    Custom code may be added to this class.
  // ---    Warning: Do not modify method signatures of generated methods.
  // ---------------------------------------------------------------------
  
  public class UsersVOImpl extends ViewObjectImpl {
  
      private static ADFLogger LOGGER = ADFLogger.createADFLogger(UsersVOImpl.class);
      private long hitCount = 0;
  
      /**
       * This is the default constructor (do not remove).
       */
      public UsersVOImpl () {
      }
  
      /**
       * executeQueryForCollection - overridden for custom java data source support.
       */
      protected void executeQueryForCollection (Object qc, Object[] params, int noUserParams) {
  
           List<String> usersList = new ArrayList<String>();
           usersList.add("Brad");
           usersList.add("Adam");
           usersList.add("Aaron");
           usersList.add("Fred");
           usersList.add("Charles");
           usersList.add("Charlie");
           usersList.add("Jimmy");
  
           Iterator usersIterator = usersList.iterator();
           setUserDataForCollection(qc, usersIterator);
           hitCount = usersList.size();
           super.executeQueryForCollection(qc, params, noUserParams);
  
      } // end executeQueryForCollection
  
      /**
       * hasNextForCollection - overridden for custom java data source support.
       */
      protected boolean hasNextForCollection (Object qc) {
  
           Iterator usersListIterator = (Iterator)getUserDataForCollection(qc);
           if (usersListIterator.hasNext()) {
       
               return true;
  
           } else {
  
               setFetchCompleteForCollection(qc, true);
               return false;
  
           } // end if
  
      } // end hasNextForCollection
  
      /**
       * createRowFromResultSet - overridden for custom java data source support.
       */
      protected ViewRowImpl createRowFromResultSet (Object qc, ResultSet resultSet) {
  
           Iterator usersListIterator = (Iterator)getUserDataForCollection(qc);
           String user = (String)usersListIterator.next();
           ViewRowImpl viewRowImpl = createNewRowForCollection(qc);
  
           try {
  
               populateAttributeForRow(viewRowImpl, 0, user.toString());
  
           } catch (Exception e) {
  
               LOGGER.severe("Error Initializing Data", e);
               throw new JboException(e);
  
           } // end try/catch
  
           return viewRowImpl;
  
      } // end createRowFromResultSet
  
      /**
       * getQueryHitCount - overridden for custom java data source support.
       */
      public long getQueryHitCount (ViewRowSetImpl viewRowSet) {
           return hitCount;
      } // end getQueryHitCount
  
      @Override
      protected void create () {
  
           getViewDef().setQuery(null);
           getViewDef().setSelectClause(null);
           setQuery(null);
  
      } // end create
  
      @Override
      protected void releaseUserDataForCollection (Object qc, Object rs) {
  
           Iterator usersListIterator = (Iterator)getUserDataForCollection(qc);
           usersListIterator = null;
           super.releaseUserDataForCollection(qc, rs);
  
      } // end releaseUserDataForCollection
  
  } // end class
  
  

  <af:inputListOfValues id="userName" popupTitle="Search and Select: #{bindings.UserName.hints.label}" value="#{bindings.UserName.inputValue}"
                                                label="#{bindings.UserName.hints.label}" model="#{bindings.UserName.listOfValuesModel}" required="#{bindings.UserName.hints.mandatory}"
                                                columns="#{bindings.UserName.hints.displayWidth}" shortDesc="#{bindings.UserName.hints.tooltip}" autoSubmit="true"
                                                searchDesc="#{bindings.UserName.hints.tooltip}"                                           
                                                simple="true">
                            <f:validator binding="#{bindings.UserName.validator}"/>                       
  </af:inputListOfValues>
  
  
  
  

  I found a solution to this problem. It seems that, when using a view object programmatic that has a transient as its primary key attribute, you need to override the methods in the ViewObjectImpl so that he knows how to locate the line related to the primary key when the view object records are not in the cache. That's why it would work properly sometimes, but not always. Here are the additional methods that you must override. The logic you use in the retrieveByKey would be on a view view object database object and would be different if you had a primary key consisting of multiple attributes.

  @Override
  protected Row[] retrieveByKey (ViewRowSetImpl viewRowSetImpl, Key key, int i) {
      return retrieveByKey(viewRowSetImpl, null, key, i, false);
  }
  
  @Override
  protected Row[] retrieveByKey (ViewRowSetImpl viewRowSetImpl, String string, Key key, int i, boolean b) {
  
      RowSetIterator usersRowSetIterator = this.createRowSet(null);
      Row[] userRows = usersRowSetIterator.getFilteredRows("UserId", key.getAttribute(this.getAttributeIndexOf("UserId")));
      usersRowSetIterator.closeRowSetIterator();
      return userRows;
  
  }
  
  @Override
  protected Row[] retrieveByKey (ViewRowSetImpl viewRowSetImpl, Key key, int i, boolean b) {
      return retrieveByKey(viewRowSetImpl, null, key, i, b);
  }
  

• How can I erase images in the Clipboard when using applications of ink sketches and slide or lines?

  I had trouble with my Clipboard by using my ink from adobe. Y at - it anyway I can't erase the pictures stored in the Clipboard, as were trying and I can't find a way to do it, it seems that the only option is to turn the selection to your Favorites and then appears an icon to the trash can, but even if I chose to delete it only fade Favorites Clipboard in the Clipboard.

  I thought to delete the sketches App, or the deletion of the draft but I don't want to risk losing my job.

  Thank you!

  I asked a similar question in the forum to draw lots and got this response:

  Re: How to clear the Clipboard and empty drawings?

  In short: you can not erase these clippings, at least not now.

• Can I use Satellite R630 with Netgear and Intel wireless display technology

  Dear all,

  I am a user of a Satellite R630-105 (processor i3 M350). I would use this laptop with Wi - Fi on my plasma on the wall display. Recently, I heard about Intel wireless display technology connected to the Netgear adapter as a possibility for wireless connection to the screen.

  Can I use my computer with this technology? If so, what is the process? If not, is there an alternative, using cable is very inconvenient. I'm at the beginner level.

  Thank you very much, to come.

  Peter

  > I would like to use this laptop with Wi - Fi on my plasma on the wall display.
  Can you please me for what purpose you need this connection?
  I mean what kind of data you want to transfer?
  With other words you do exactly?