When using the 'typewriter', then put it a 'text area' at the border around the words, the word 'fade' o

Similar Questions

• Single line vertical when using the ADF to Scan or copy on HP Officejet Pro 8600

  Printer HP Officejet Pro 8600 Premium (CN577A)

  OS: MS 7 64-bit

  When you use the ADF for my printer HP CN577A Officejet Pro 8600 Premium, I get a single vertical line on the document which is produced. This occurs when copying or scanning, both black and white and in color. If I scan or copy using the glass, I do not get the vertical line.

  I already tried troubleshooting.  I unplugged the printer, left without electricity for several minutes; that didn't fix the problem.  Then, I cleaned the rollers and glass; I always get the vertical line, but only when using the ADF.

  My firmware version is up to date (CLP1CN1150CR).

  What should I check next?

  The only difference between the ADF and scanning flat, from a point of view of the scanner is there on the glass, it happens.  I suggest you get a bright flashlight and examine the corresponsing area hence is the line, it's almost certainly a spot on the strip of thin glass which is being just in the right place.

  I've seen some people suggest that put a flashlight almost parallel to the Strip, it shines from the bottom can highlight the area problem.

• OfficeJet Pro 8600: Officejet Pro 8600 leaves black lines on docs scanned when using the document feeder

  This is the second HP Officejet Pro 8600 I had - one was replaced by HP, after that the same issue arose.  I tried to clean the entire unit, but we still get a thin black line running vertically down the page.  This line is divided into sections of 1 "and 2.5" in length.  Sometimes I get the fine line and then almost a shadow line that is parallel.

  Any suggestions would be very appreciated I have scan documents to PDF format and it's hassle to put everyone on the flat for scanning.  I use the charger of the doc on a daily basis and wonder if this could have something to do with the lines.

  Thanks for any help.

  The question is a spec on thin (~ 1 "wide) glass to the left of the main bed scanner.  Clean this area as described in this document.  It can be difficult to see the affected area, a bright flashlight which is held at an angle to the glass can help find the place.  Even a very small spec on the glass can cause a black line when using the ADF.

  

• Satellite A200 - IE7 windows 'restore down' when using the Tracker pad

  Hi, I recently bought a Satellite A200 - 1VO and when using the laptop without a windows mouse explore 'restore down' at random.

  I found a thread on the site of the Internet USER who said that if his past not with a mouse, it may need tracker drivers up-to-date.
  You can also consider its under warranty.
  Any ideas anyone?

  Hello

  It s a bit confused what you´ve writes down. What do you mean exactly, where´s the problem and what you want to tell us when writing:

  > and when using the laptop without a windows mouse explore 'restore down' at random.
  >
  > I found a thread on the site of the Internet USER who said that if his past not with a mouse, it may need tracker drivers up-to-date.

  Whereas it should be, where´s now the problem?

  Please give clear and understandable feedback, then I and other users you could point to the solution.

  THX

• disable the touchpad when using the mouse?

  How to disable the touchpad when using the mouse?

  Hello

  Please contact Microsoft Community.

  Most laptops have a function key (FN) which can be used in combination with other keys for example FN + F2 or FN + F7 to disable or enable the touchpad.

  You can also disable the touchpad in Device Manager.

  To disable the touchpad in Device Manager, follow these steps:

  1. Click Start.
  2. In the start search box type devmgmt.msc, and then on enter.
  3. In Device Manager, expand mice and other pointing devices and locate the touchpad.
  4. Right click on the touchpad and click on the disable option.

  Following the steps above should help you disable the touchpad.

• Hello! My question is, why so many photoshop is making selection when using the quick selection tool, before that it was unable to myself. Can someone tell me aolucion, please. Thank you!!

  Hello! My question is, why so many photoshop is making selection when using the quick selection tool, before that it was unable to myself. Can someone tell me aolucion, please. Thank you!!

  Hi Axe_Juan,

  Could you please let me know the version of Photoshop installed on your computer?

  Also you want to State as Photoshop not to do a quick selection?

  If so, then head over to the Photoshop preferences, then the performance tab and click on 'Big and flat', restart Photoshop and then use the selection tool.

  If something else, please let me know.

  Kind regards

  Tanuj

• I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  iPhones have a proximity sensor which is supposed to automatically turn off the screen when you hold it in your face. If this is not the case you can take the phone and have it checked.

• I6 fire babysit device when using the internet? any solution?

  I6 fire babysit device when using the internet? any solution?

  Let's define "overheating". If the temperature of the phone reached a dangerous level the phone turns off it to cool down. This phenomenon occur? If this is not the case it is not overheated.

  What is your cell signal? If the signal is low, the phone must increase its power to maintain a connection. This may require as much as 10 times the energy as a strong signal, and the phone gets hot under these conditions. If will also drain the battery very quickly.

• When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  Hello

  With Docking Station, you can connect all the cables for printer, keyboard and mouse, adapter directly to the charging station.

  So whenever you use a laptop, you have just dock the laptop on the docking station and not need to re connect all cables again.

  This will help you when you move frequently with the laptop.

  Docking station will save your time, outside any other aspect, that it has to offer.

  Zaki.

• Error message indicating the r300 display driver stopped responding when using the full screen.

  Original title: driver atikmdag error message when using the full screen.

  Error message indicating the display driver r300 unresponsive, but has recovered, usually when enter full screen mode.

  Hi Peterrichardson,

  1. when exactly you get this message?

  2. what player do you use?

  3. you remember to make changes to the computer before this problem?

  Method 1:

  You can try to reduce the hardware acceleration and check.

  a. click the Start button, Control Panel.

  b. now, select appearance and personalization, and under display, select adjust screen resolution.

  c. now, select adjust the resolution.

  d. click Advanced settings.

  e. now, click the Troubleshooting tab, and select the change settings button.

  f. in the Security dialog box, click on continue.

  g. move the hardware acceleration slider to the third notch.

  h. click OK and restart Windows.

   

  Method 2: Update your display driver

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• OfficeJet pro 8600 print a single vertical black line when using the charger

  OfficeJet pro 8600 print a single vertical black line when using the charger

  Hi @realestatejeann,

  I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  If you need help, let me know.

  Good day!
  Thank you.

• Excel crashing, freezing when using the spreadsheet

  Original title: Excel 2013 file size.

  Hello. I'm having a problem with Excel crashing, freezing when using the spreadsheet. I work on a PC with WINDOWS 7 SP1 64-bit, through a server that is running Microsoft SERVER 2013, WINDOWS 7 PRO 64 BIT SP1. We use 5 PC via all current server running the same version of operating system that use the spreadsheet and in most is used only by 3 PCs anywhere, anytime, even if EXCEL is not on the server, it is running locally on the PC.

  My guy TI tell me the spreadsheet while working on too big to 2 k! They keep asking us to reduce the size and to separate the workbook to solve the problem. Personally I don't believe a Word, we do not use formulas etc just cells with digital text and the alphabet.

  Now last year on the advice of our computer SCIENCE company, we have been advised to upgrade our server and our PC because terminals that they were getting their limit of operation which I accepted. These have been updates middle of last year.

  On this basis, I believe that society COMPUTER trying to throw dust on my eyes as I do not think that they provided the wrong material and are unwilling to admit it.

  Counsel on the question worksheet would be great I need to come back with some kind of evidence in support of my way of thinking.

  I hope that makes sense, I know a little but not professional!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• What type of layer should be used when using the effects lighitng filters "I can't using the way I expect to work -

  What type of layer should be used when using the effects lighitng filters "I can't using the way I expect to work -

  I want to add lights to he image - and to inform the parties of the image - I duplicated the layer add the lights in the filters, but it does not act as a process additive-

  Check out this tutorial from Phlearn on YouTube. It is a bit more flexible, but, of course, requires a bit of elbow grease more Photoshop-wise.

  Create beams of light in Photoshop - YouTube

  Using this technique, you can adjust the 'lights' as you want by manipulating setting masks. See screenshot below. (Still once again, excuse the butchering.)

  

• Where is the DBMS output window when using the PL/SQL Editor in v1.5.5?

  I find the output window of DBMS when using the SQL worksheet, but where is when I run a PL/SQL procedure in the PL/SQL Editor window?
  
  I'm used to using TOAD (and want to use SQL Developer, because it's much better behaved when executing procedures, among other problems, TOAD refuses to reduce to a minimum when it executes a pl/sql procedure) and it allows me to edit a pl/sql procedure, enable the DBMS output window, run the proc, and have the DBMS lines show up in the said output window.
  
  I can't find the same functionality in SQL Developer. I've seen a lot of posts (this forum and a Google search), but they all talk about the SQL worksheet. This is not what I want.
  
  Any help would be greatly appreciated.
  
  Thank you.

  Hello
  After running PL/SQL procedure, I saw all the important information in the running tab (called Running - log) including DBMS_OUTPUT.put_line lines.
  Petr

• WCF error when using the API of VSM

  VSM 9.1.4

  Oracle 10g R2

  I am attemtping to use the "MessageSendMessage" command in the VSM API to send back the client permissions and I get the following error message when running it from the VSM server.

  ERROR: The operation 'ContractUnlinkCIAsync' cannot be loaded because it has a parameter or type System.ServiceModel.Channels.Message or a type that has the MessageContractAttribute and other parameters of different types of return. When using System.ServiceModel.Channels.Message or types with MessageContractAttribute, the method should not use other types of settings.

  It's an odd error because I do not use the "ContractUnlinkCI" command which tells me that there is a problem with the generation of the class file.

  I ran the following command to generate my config file and the class in the directory "C:\Program Files (x 86) \Microsoft 4.0 Tools":

  Svcutil t:code /MessageContract. [URL ServiceManager.svc] / out: ISMAPI.cs /config:ISMAPI.config

  The class files and generated config ok. Then I copied the game config to the Web site's web.config file:

  < system.serviceModel >

  < links >

  < basicHttpBinding >

  < connection name = "BasicHttpBinding_IServiceManager" / >

  < / basicHttpBinding >

  < / links >

  < customer >

  < endpoint address = "[ServiceManager.svc URL]" binding = "basicHttpBinding" bindingConfiguration = contract "BasicHttpBinding_IServiceManager" = "IServiceManager" name = "BasicHttpBinding_IServiceManager" / >

  < / customer >

  < system.serviceModel >

  I put the ISMAPI.cs file in the App_Code to my site folder:

  

  My code works fine when I run locally and include the correct querystring values, but it returns the error above, when I run the code from the VSM server. The query string I used: default.aspx? ajaxfunction = 2 & tasknumber = 425134 & agent = 2370 & recvofficer = 2370

  using System;
  using System.Collections.Generic;
  using System.Web;
  using System.Web.UI;
  using System.Web.UI.WebControls;
  using System.Data;
  using Oracle.DataAccess.Client;
  using Oracle.DataAccess.Types;
  using System.Runtime.Serialization;
  using System.ServiceModel;

  partial class _Default: System.Web.UI.Page
  {
  Protected Sub Page_Load (object sender, EventArgs e)
  {
  Response.Expires = - 1;
  Response.ContentType = "text/plain";
  If (Request.QueryString ["ajaxfunction"]! = null)
  {
  Try
  {
  Int16 intFunction = Int16.Parse (Request.QueryString ["ajaxfunction"]. (ToString());
  Switch (intFunction)
  {
  case 1:
  If (Request.QueryString ["tasknumber"]! = null)
  {
  Int64 intTaskNumber = Int64.Parse (Request.QueryString ["tasknumber"]. (ToString());
  Response.Write (getTaskApprovalComments (intTaskNumber.ToString ()));
  }
  break;
  case 2:
  If (Request.QueryString ["tasknumber"]! = null & & Request.QueryString ["officer"]! = null & & Request.QueryString ["recvofficer"]! = null)
  {
  MessageRequest load = new MessageRequest();
  inStruct.sLoginUserID = System.Configuration.ConfigurationManager.AppSettings ["apiLogin"];
  inStruct.sLoginPassword = System.Configuration.ConfigurationManager.AppSettings ["apiPassword"];
  inStruct.sDatabase = System.Configuration.ConfigurationManager.AppSettings ["apiDatabase"];
  inStruct.eEntityType = CRTEntityForEmail.Task;
  inStruct.nEntityRef = Int32.Parse (Request.QueryString ["tasknumber"]);
  inStruct.ePriority = MailPriority.Normal;
  inStruct.eMMAMessageType = MessageMMAType.Approval;
  inStruct.nMessageType = 130;
  inStruct.lRecipientRef = ' ~ ' + Request.QueryString ["recvofficer"];
  inStruct.eRecipientType = MessageRecipientType.Person;
  inStruct.bEmail = true;
  MessageResponse outStruct = new MessageResponse();
  SMC ServiceManagerClient = new ServiceManagerClient();
  outStruct = SCM. MessageSendMessage (inStruct);
  Response.Write (outStruct.sMessage);
  }
  break;
  by default:
  Response.Write ("ERROR: invalid function!");
  break;
  }
  }
  catch (System.Exception Exception)
  {
  Response.Write ("ERROR:" + exception.) (Message);
  }
  }
  Response.End ();
  }

  I hope one of the other directors VSM has met this problem and knows a solution. I tried Googling this issue but with my knowledge of WCF, I don't know what I'm looking at. I also tried commenting on the problem area in the ISMAPI.cs file but it gives me an other errors so I obviously don't know what I'm doing.

  Thank you.

  If locally it works fine I guess you should compare the versions of .net framework assigned to your web applications (application pool), and all the parameters specified in the web.config file.