When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again
- When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again
Hello LisaQuaranto,
I suggest that you configure the computer to start in minimum mode, download the update from the Download Center and try to install the update.
To perform a clean boot on a computer that is running Windows Vista:
a. Click Start, type msconfig in the search box and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
b. on the general tab, click Selective startup.
c. under Selective startup, clear the check box load startup items.
d. click OK.
e. When prompted, click on restart.
f. after the computer starts, check if the problem is resolved.
If your problem is resolved after the clean boot, and then follow the steps in the following article to narrow down the exact source:
http://support.Microsoft.com/kb/929135
In addition, refer to the section on how to restore your computer to a Normal startup mode by following the steps under "Reset the computer to start as usual", after performing the clean boot troubleshooting.
You can download the update following the link below:
http://support.Microsoft.com/kb/968930
Thank you
Irfan H, Engineer Support Microsoft Answers
Tags: Windows
Similar Questions
-
XP SP3... Do not install Windows Update KB968930 PowerShell 2.0 and WinRM 2.0. Error 0x8007F070
I uninstalled the .net framework and reinstalled from the beginning. Still not get it to take, any help would be appreciated.
Thank you
Try ' Haralambos Mavromatidis solution suggested this feedback connect.microsoft.com poster:
Problem was resolved by resetting the security - choose your own switches or use the following for a newspaper at the root of C: file by typing the following in a command prompt:
%windir%\system32\secedit.exe / configure %windir%\repair\secsetup.inf /db secsetup.sdb/log C:\secedit.log /verbos /cfg
-
Hello
I did a clean install on winxp pro, it ended by an "unexpected error", it will not install, shows me the error and restart try to reinstall and same error. I checked around and it could be due to the intallation disk which was scratched and unable to read the files (I tried the disk image and failed). I made a copy of the disc as soon as possible, but it is bootable. I tried putting in the cd copied, tried to locate the file but could not (don't kn OW the drive and folder).
Is there a way to make the copy bootable cd? (in my pc, I made a copy of the Setup disk) or is it all the same to overcome this obstacle?
Thanks in advance.
Richard
original title: clean install went wrong
Hello
What is the full and exact error message?
Read the following article.
Error message "an unexpected error has occurred (536821760)" when you try to install Windows XP
http://support.Microsoft.com/kb/316400 -
Firstly: I understand that Windows XP can have Windows Vista upgrades. Second, Windows 7 upgrades require Windows Vista not windows XP.
So:
-If I had to install Windows XP: I install the Vista upgrade right after? Or should I get all updates for XP first?
-If I had to install Windows Vista: I would like to install the Windows 7 upgrade right after? Or should I get the updates for Vista first?
-Would be recognized hardware in a laptop in the upgrade or installation of the version full? For example: I have a laptop. It is pre-loaded with the software and hardware that had specific software: for example: the modem, modem wireless and other things that the cell needs to function... But I had to make a back-up for the laptop, there was no installation cd and cd software. I know that Windows installs drivers that are ok. The material would be useless if?
Thank you.
"If it ain't broke...". "is well thought!
It is whether equipment manufacturers if they write Vists/etc drivers, or not.
And they often decide to sell more NEW material, instead of writing the most recent operating system drivers.
Microsoft depends a lot on what they provide.
See you soon.
Mick Murphy - Microsoft partner
-
No matter what I change the proxy settings whenever firefox is started it is returned to the manual configuration of the proxy and should be changed to no proxy for me to access the net.
OS is XP proSee these items in support.
https://support.Mozilla.com/en-us/KB/preferences+are+not+saved
http://KB.mozillazine.org/Preferences_not_saved -
I start to install updates now for several days and each time that they do not. Error code 80070641 rises now and I now have problems in Windows Mail. The update was for the Windows desktop. When I opened my Windows Mail... error codes are as follows: Socket 10061 error and Error 0x800CCC0E #.
Hi colorfulvue,
Welcome to the Microsoft Answers site
I would like to know if you are using Windows Live mail or Windows mail in Windows 7.
Windows 7 comes with windows live mail default and a default windows mail vista.
If you use Windows live mail you will need to post your problem on this link:http://social.microsoft.com/forums/en-US/categories/
I suggest download you Windows Installer CleanUp Utility from the Microsoft Download Center:
http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe
Disable all security software.
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=enThen run this:
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058Try to install the updates manually by downloading the stand-alone package after the reset of the windows components.
Follow this link to learn more:http://support.microsoft.com/kb/934307
All the best!
Thanks and greetings
Bika: MICROSOFT SUPPORT
Visit our Microsoft answers feedback Forum and let us know what you think. -
When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?
I'm not that computer literate and do not understand what needs to be fixed.
This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.
I use ESET Antivirus Node32 software.
Hello
1. What is the error message or an exact error code?
2 have you made changes on the computer before this problem?
3. you try to check the updates?
I would suggest trying the following methods and check if it helps.
Method 1:
Reset Windows Update components and then try to download the updates.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756
Method 2:
File system scan tool checker and then try to press Ctrl + Alt + Delete and check.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):
http://support.Microsoft.com/kb/310747
Please respond with more information so that we could help you more.
-
When windows update, the restart may end, it says please wait and do not restart unless I closed it and open it in safe mode, what can I do?
Hello
1st thing to try is a restoration of the system in safe mode
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not read this information
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/
If the problem continues to repost in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
When windows update is running on my machine (and updates), my screen goes down to 1024 x 768. I have a HD card of ATI all-in - Wonder and an Acer X203H LCD with DVI connection. If I use system restore to go back, I can get higher resolutions, but Windows does its thing and I'm back at low resolution. I can't change the settings manually as 1024 watch as the highest res available to the general public when this happens. There must be some weird conflicts. I tried to update the drivers, that made no difference. Is there a setting Aero or the conflict at stake here? In the past, I've had trouble with a display of balnk and I had to go back to the 2008 version of the driver to get things to work. From there, whenever I update, I can keep high resolution, but after the last windows update (security of IE8 and much smaller pack that was released on March 28-30), it dates back to 1024 x 768 again. Control Panel and catalyst control the two show that as more high resolution available for refresh rate. Suggestions?
Change your update settings to find the problem, we > then right-click on > hide.
And don't do hardware drivers through Windows updates.
Find them in the equipment or the system direct manufacturer.
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Understanding Windows Update and Extras in Windows Vista
Download updates but let me choose whether to install them - if you select this option, Vista will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.
Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.
See Update above settings to solve this problem
See you soon.
Mick Murphy - Microsoft partner
-
When you try to install Windows updates I get errors 66A and next.
original title: 66A and FF errorsI tried to install the important updates KB2446708 and KB2467174. On the first appears an error 66A. On the second a FF error. How can I solve this?
Hello
see if that helps to fix:
How to reset the Windows Update components?
There is also an automatic 'fix - it' here
http://support.Microsoft.com/kb/971058
Also, try to put the KB numbers in the search on the link below and then manually download the
http://www.Microsoft.com/downloads/en/default.aspx
or repost in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
Windows Update has encountered an error and cannot display the requested...
I tried Windows Update and got the answer "Windows Update has encountered an error and cannot display the request... »
Hello
(1) what is the description which are impossible to install updates?
I suggest to follow the steps provided and check if it helps.
You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update: http://support.microsoft.com/kb/883614
Hope this information is useful.
-
Error message Windows XP Home Edition comes out "generic host process for win 32 services has encountered the problem and needs to close" when you log on windows xp. I found the article exactly to what I have experienced http://support.microsoft.com/kb/821690 but as far as I know, this issue is not caused by an old HP printer. Can you give me the steps to fix this problem other that that link I mentioned. Thank you.
Hello
· You have a HP printer connected to the computer?
If so, try the article you mentioned.
Generic host process error message and a flashlight icon appear
If this is not the case, check to see if this article helps you.
Error messages when you start a Windows XP-based computer and then try to download Windows updates
-
Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem
My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.
Please suggest
Hi Mohammed Arif a. R,.
You can try to plug the printer again and check the updates of Windows and see if the drivers are install.
Install Windows updates in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates
You can also view the following HP Web site and try redownloading drivers and check.
Also check out the following link and try the suggested steps.
Network printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
Note: This article also applies to Windows 7.
Hope this information is useful.
-
Error 66 has, when trying to install the update to windows
Original title: I'm trying to update my windows through windows update but it keeps failing and saying found error code 66A
cannot fix the windows update
I'm trying to update my windows through windows update but it keeps failing and saying error found code 66A (unknown error) and then I went to fix with windows repair and he says its fixed, but now it used to always update the same said just only he thinks its fixed Please help!Hello
Did you make any changes before the show?
You can read the following article and check.
Codes error '0x8007066A' or '66' was to occur when you install updates of .NET Framework
http://support.Microsoft.com/kb/2507641/en-us
It will be useful.
-
I have used Acrobat Pro DC to embed a video clip in a video and, when prompted, updated my copy of Flash Player to 17.0. Now, even if the Adobe site confirms that Flash Player 17.0 is installed and enabled on my system, the video still does not play when I click on the Start button. Instead, I keep getting the prompt direct me to install the necessary revision of the Flash Player. Can any clarify what is happening here and I need to do to remedy this? I'm working on a system with Windows 7.
You must install the NPAPI Flash Player (for Firefox, etc) not the plugin for Internet Explorer ActiveX plugin. Acrobat cannot use the ActiveX version.
Maybe you are looking for
-
Clean install vs. OS pre-installed
Recently, I installed win 7 retail on my pre-installed version. (after a quck format) then I installed the software. But contrary to popular belief, I can't find it to be any more quickly. Yes as soon as it was installed, it was faster (USGE 15% of 4
-
Webcam does not work on Skype, but I can get a preview in the video settings
My webcam is not working for Skype calls, but I can get a preview on the Skype video settings and it also works on the various programs and services that use the webcam. This problem occurred recently when Skype has updated to the new layout
-
Hello I have try it with 2 different power and nothing happens. no light, no sound, no fanI have check all internal connectors. Any idea? Any help is appreciated...
-
LabVIEW base, protocols supported system of development and the basic features
Hello I ask this question here because I can't find that information on the web, or I get the technical support e-mail response. We are interested in acquiring a license of basis of Labview to start development to develop test for simple automation s
-
The second column in my Free Cell game dropped about 3 ". I can't go back. When you add maps to it, the cards on the bottom are not visible. All solutions how to get it back in line with the other columns?