When you guys come out the last android 5.0 for the acer iconia a1-830 l

Similar Questions

• How do I turn off the sound when one take a picture in the acer iconia a1 830

  I want to mute the sound when I take a photo in the acer iconia a1 830.

  This is my first time that i use this tablet, and I do not have this problem. I try to lower the sound level maximum. and I can hear the sound.

  This problem is very basic, and I need a solution.

  The other problem is the temp my tablet is 42 degrees Celsius (with an application to read the temperature of the battery)

  is normal that?

  I solved the problem. I downloaded another app to take photos and this app has the mute option the camera.

• I wonder when Adobe will come out the site feature reagent version Adobe Muse CC 2015?

  There is a certain date for release of reactive Site feature Adobe Muse CC 2015?

  Late November is the oldest, I heard. For more information, you must join the preliminary group.

• When comes out the next firmware for the "rocket"?

  When comes out the next firmware for the "rocket"?

  Sometimes in the coming months

• Problems when you try to move the 3 stepper motors

  Hello

  I have problems when I Isaiah to compile a 3 stepper motors control program.

  I have 3 steepest motors and controller (3 SMCP33 + SMCP33-EVA) nanotec.com, they also provide an example of Vi to control a motor that works successfully, but problems happen when I try to adapt the program to try to start the 3 Motors. The final application for this is going to be a Cartesian robot XYZ so finally I need to program coordinates to move the 3 Motors.

  I am new to LabVIEW, so what I do is try to adapt the nanotec example to order 3 engine as follows.

  -J' I assign each engine a different address, doing so that I can run each engine separately. But when I try to run 3 programs at the same time, they work but all moving them the engine (the first that has been run).

  -If I try to make a sort of sub - VI is the same thing, only one motor is driven.

  -Moreover, I get a warning when I try this, I have attached a screenshot of this.

  I have attached the Vi and texture it to improve my description.

  I woul be grateful if someona can help aport.

  Kind regards.

  Thanks for posting the original.  By comparing the two screws immediately gives an indication of what might happen.

  In the picture you posted you circled two places where you changed the address of the reader. In the Example.vi - Nanotec address of the player is connected to about 14 seats.  So when you try to run the other engines in your modified program, the 12 places, you have not changed the address of the player are always preset to motor 1.

  What you need to do is to divide the example VI in at least three parts.  The first part initialization. The next part moves the engine.  The last part ensures that the engine is stopped and made any required another stop.  Each party becomse a separate Subvi. Each Subvi has the address of the reader as input.  The initialization and shutdown parts are placed before and after a while loop.  The movement parts are inside the loop.  You can use three of each sub - VI for the three engines or a Subvi combined with subVIs move three to manage all three engines.

  I can't say what approach might be better without knowing more about how you plan to order the engines - one at a time or all three at the same time, what kind of feedback is used, how management mistakes and other topics.

  Lynn

• internet access - I always get 'pending on the cache' when you try to access the Internet

  Why do I always get 'pending on the cache' when you try to access the internet

  Hi reneamayo,

  1 Windows operating system you are using?

  2. what browser do you use?

  3. If you are using Internet explorer, what version of IE are you using?

  4. When did you start to question?

  If you use IE, then you can try to run the Fixit mentioned in the link below and check:

  Improve performance and security in Internet Explorer

  http://support.Microsoft.com/mats/ie_performance_and_safety/

  You can also check out the following link and try the steps:

  How to remove the contents of the temporary Internet files folder

  http://support.Microsoft.com/kb/260897

  Hope this information is useful.

• LDIF syntax error: what is the reason of this failure when you try to import the new user

  What is the reason of this failure when you try to import the new user, followed the book syntax

  C:\Users\Administrator\Documents>ldifde-i f Newusers.ldf
  Connecting to "practice01.testa01.com".
  Registration as current user using SSPI
  Import directory of the file "Newusers.ldf".
  Loading entries.
  There is a syntax error in the input file
  Failure on line 3.  The last token starts with 'C '.
  0 entries modified with success.
  An error has occurred in the program

  Hello

  The question you have posted is related to LDIFDE with Active Directory in a domain environment, and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://TechNet.Microsoft.com/en-us/default.aspx

• Error code: 0x80070005 when you try to download the update of Cumulative security for Internet Explorer 8 for Windows XP (KB2809289)

  can someone help me solve the following problem please? Error code: 0x80070005 is what appears when you try to download the update of Cumulative security for Internet Explorer 8 for Windows XP (KB2809289)

  Is this the same computer as in this other recent thread of yours? -Online http://answers.microsoft.com/en-us/protect/forum/mse-protect_start/last-mse-scan-was-two-weeks-ago-is-ok-whereas-my/05eba51d-95f6-4a5d-b313-da0994e57543

• SE error message: 'tsbyuv.dill' is missing, when you try to install the Creative webcam model No. VF0350.

  Original title: Installation of Web cam problem

  Mr President, whenever I try to install the creative material no web cam model. VF0350 to my laptop I get the error message that the "tsbyuv.dill" file is missing and asked to search for the file in c:\live!c~1\videoi~2\i386 is missing, so impossible to install my webcam creative VF 0350. I don't have the CD to install this product and so when I connect it to USB port on my laptop it doesn't work

  Hi Germany,.

  What is the brand and model of your laptop?

  Tsbyuv.dll is a module that contains functions to manage the Toshiba video display.

  If you are using a Toshiba laptop computer, you can check out the Toshiba support link and try to update the latest version of the drivers for the chipset and video drivers and check.

  Toshiba support

  You can try to download the drivers for the webcam from the following creative support link and check.

  Live! Cam Chat IM (VF0530)

  Also, check out the following links:

  http://support.creative.com/kb/showarticle.aspx?SID=53034

  http://support.creative.com/kb/showarticle.aspx?SID=48811

• When you add pictures to the Vista image folder it creates a folder HIDDEN of the same name with two copies of the same image inside

  I use Vista 32 bit. I started to see this problem when I recently copy photos from an SD card.

  When you add pictures to the Vista image folder it creates a folder HIDDEN of the same name with two copies of the same image inside

  I saw hidden files enabled in folder options.

  Any help is appreciated.

  Hey guys... I found the answer... Problem is with the software vaio content analyzer that comes with the vaio...

  It just search for Vaio Content Analyzer (parameters) and deselect
  
  Video analysis
  image analysis
  analysis of the music

  I went looking for this crazy thing... used almost all types of online scan, and finally to find that it is caused by an internal software only...
  anyway thanks to all... Hope it helps someone in the future :)

• (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  I tried all the recommended solutions that Windows can throw at me, and yet I still can't download these updates for some reason any. Whenever I run the program "Microsoft Fixit" he says it's a mistake and fixing it with success, but I still get the same error when you try to install the updates. I have checked for malware, scanning my computer everything and see nothing.

  Hello

  1. what troubleshooting steps are carried out to solve the problem?

  2 were there any hardware or software changes made on the computer before this problem?

  Method 1:

  I suggest you to return the item and check if it helps:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Check out the link and check if it works:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 3:

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

   

  Reference:

  You can download updates manually from the link below:

  http://www.Microsoft.com/downloads/en/default.aspx

  It will be useful.

• Error when you try to play the game: memory access violation

  memory access violation

  I have redownloaded a game that has been previously loaded on my computer, now I get this error when you try to play the game "Memory Access Violation".

  Your sound card that is more than adequate.
  If the game was previously installed and worked fine then maybe it is not been completely uninstalled.
  I suggest you uninstall the game, look in the registry for any left over entries that can refer to the game.

  Then restart and reinstall the game.

  Alternatively, you can try to install in compatibility mode. If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know if that helps.

  Marilyn

• Pixeled video when you watch videos on the internet... worked fine a week ago

  When I watch videos on the internet, they are really pixeled... they were very clear a week ago.  I have Vista Home Basic and a dell Inspiron 1545.not sure why the change in quality.  It seems to be good quality for a micro second then worsen the go clear back for another second micro then worsen again and again... What do I do?

  Hello sixxstringer,

  Thank you for visiting the Microsoft answers Site.

  In addition to the response of Azeez Nand perform a system restore, if the problem persists, please also relay if the same problem occurs during playback of videos located on the hard drive of your computer as suggested above in response by Azeez N.

  In addition, you can check out the link below, provided by the provider of software for Adobe Flash Player, which includes the following steps to solve the problem of poor video quality using Adobe Flash Player to view online media:

  http://kb2.Adobe.com/CPS/403/kb403107.html

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 1330 error when you try to install the software main street

  Receive the following error message when you try to install the update of the software of Boulevard of Main Street Software, Inc. 2011 on a machine running Windows Vista 64 bit HP.

  File 1330.A error required cannot be installed because the file E:\Blvd\Data1.cab has an invalid digital signature. This may indicate that the file is corrupted. Error 8205 was returned by WinVerifyTrust.

  Another attempt to run this software update received the same message except the last line shows error 24592 was returned by WinVerifyTrust.

  I managed to install the software on a laptop then. I already tried to transfer all the content of DVD on my hard drive, then by running the Setup program, without success. I have also tried to run Setup in Windows XP compatibility mode, receive the same error message.

  It is about a Windows update that has caused similar problems for other users.

  KB978601 causes "signature digital invalid" error with a CAB file
  http://www.win7heads.com/Windows-Update/73744-KB978601-causes-invalid-digital-signature-error-cab-file.html

  If you have this update on your machine, you could try to uninstall via 'Programs and features' and 'View installed updates'.

  There are many other causes mentioned in these links too.

  http://www.Google.com.au/search?q=error+24592+was+returned+by+WinVerifyTrust&SourceID=IE7&RLS=com.Microsoft:-to the: IE-SearchBox & ie = & oe = & redir_esc = & ei = jLYyTJSoIoPJccP6mbYD

  http://www.Google.com.au/search?q=E%3A%5CBlvd%5CData1.cab+has+an+invalid+digital+signature&SourceID=IE7&RLS=com.Microsoft:-to the: IE-SearchBox & ie = & oe = & redir_esc = & ei = p7cyTP2aEc3Jcda52dYD

  What have to say about this, if you contact the software factory?

  The reason why it happens a machine and not the other could be because some of your programs or the system is missing updates, have older versions of the software, or third-party programs interfere with the installation.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

• DIFx Driver Package install error = 536870141 when you try to install the MFL-ProSuite for a Brother MFC-J870DW printer all in one

  Hi everyone, I have read the various issues pertaining to the Brother software and the IS052 error that I got also.

  I spoke with brother two times and they tell me that I'm missing a driver and if I sent the error message DIFx Driver Package install error = 536870141 to Microsoft, they would be able to provide me with the driver I need.  Brother also had me try to install from the disk and also on their site and I got the same error.

  I am a home user, so not very technical when it comes to drivers, etc..  I know that you need.  So please don't you technique on me.  I have been messing around with this now for almost 2 weeks and can that copy and print.  I can't scan or fax due to this error when you try to install the software.

  I have the disk with the drivers on what I did when we first got the computer.

  I use Windows 7 64-bit.  I really need help so I hope that there is someone who can solve this problem.

  Thank you very much

  Judy F.

  SW Florida - USA

  Karthik, sorry it took me so long to answer.  I hate it when people do that to me then again I am sorry.

  After trying your suggestions, nothing seemed to work so I asked my son who is a type of systems to help me.  I he provided with suggestions and error message, etc..  He read about all this and then remote connected my suburb.

  He renamed the errorlog and then tried to reinstall the Brother software and got the error.  He was then able to read this file was causing the error without reading through the tone of the error messages.  It turns out that there is a file that brother was looking for in one place, but it was in another.  He copied to where brother was looking for her, has done a reboot, loaded the software without problem.

  I am now scanning and everything works as it should.

  So maybe it's the same problem that others causing a problem.  If they can get the steps to find the error Log, look at the error message that is created in the error log, which will tell them what brother file cannot find and then go from there.

  I don't think I could have done myself, but he knew where to look for such things, and I don't have.

  Thanks again for all the help I got from this forum.

  Judy F.  (a happy user of printer Brother)