When you rename a file highlights only the name and not the name extension.

Similar Questions

• When you rename a file change the last timestamp consulted?

  I was in a heated debate with one of my instructors today associated with a test on the access timestamp question when you rename a file. Through my research and testing to rename a file via the command prompt, it does not appear that the process of renaming a file will change the date of that last file access. Access and modify times will change to the directory that contains the file, but not the file itself.  So my understanding is that it is not, however, my instructor insists that it is, can someone shed some light on this topic please?

  Reading material more - it's interesting.

  More information under:

  Windows NT keeps track of three stamps of time associated with files and directories. These three temporal are written in creation, last access, and last. When a file or directory is created, accessible or changed, Windows NT updates the appropriate time stamp.

  http://support.Microsoft.com/kb/148126/a

  NTFS uses the change log to track information on the added files, deleted and changed for each volume.

  http://TechNet.Microsoft.com/en-us/library/cc938919.aspx

  Working with file systems

  http://TechNet.Microsoft.com/en-us/library/bb457112.aspx

• When you delete a file in Vista, the dialog box remove does not close until the computer is restarted

  When you delete a file in Windows Vista, the dialog box remove don't close until the computer is restarted. It is sometimes possible to remove it by closing tha task list. When this is done, the Explorer is closed and restarted.

  Hi Brian,.

  (1) since when are you facing this problem?

  (2) remember to make changes?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  
  Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to resolve missing or damaged on Windows Vista or Windows system files

  http://support.Microsoft.com/kb/929833

  Method 3:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• When you import WMV files, I only get the first seconds of my film.

  I'm doing a correction of color on a wedding video.  The video was captured using Windows movie capture software and saved to a WMV file.

  The file is approximately 700 MB and 50 minutes long.  When I import the file that the project tab shows how we don't about 25 seconds.  When I saw it, although 25 seconds will appear. He made this for all the wedding videos that I import.

  Any ideas on how to solve this problem?

  What version of AE and with what parameters of compression were they captured? Flow premature endings usually points to the VBR encoding, which AE does not particularly like. From Movie Maker files can also contain data specific to the program as the edit markers, which could also be misinterpreted by AE. Check things and maybe try different settings. Otherwise, just use VirtualDub and similar tools to convert conventional opinion or other formats.

  Mylenium

• Is it possible to cancel when you rename a file?

  (1) music files moved to mobile phone (USB mass storage mode)

  (2) phone has the limitation on the characters of filename

  (3) changed a filename and the next thing I know, I have 25 files renamed "BB King & Claption - Riding With the King" (of course, each with [2], [3], etc. [4] annexed)

  (4) looked anywhere obvious for "UNDO" command (NO obvious!)

  (5) waste of time connect the [so-called] relevant search terms help... Nada!

  (6) could someone please direct me to the absolutely necessary UNDO function in this case, work with files in a folder!

  Thank you, in advance.

  There is a short window of opportunity to cancel action (move, rename, copy type) file in Windows Explorer or the windows folder using the Edition Menu (or by pressing Ctrl-Z).  You will see Cancel Rename as option for example.  Only the most recent file action is not achievable, so it is too late.

  It seems that you had several selected files when you made the name change. When you have several selections that Windows renamed it using the name that you enter and sequential numbers in square brackets.

• How do you rename a file to add the letters in front of .pdf, example ".ngpdf"?

  I'm trying to rename a pdf file, so it can make it through a projection of corporate firewall, such as requested by the company.  They taught me that to send PDFs from a personal account, I need to rename it so that the file extension ".ngpdf".  I can't get that to work.  Any suggestions?

  Ah, maybe I understand - you do not see the file extension?

  You must change your Windows Explorer settings to show the file extension.  Here are the instructions for Windows 7; It should be similar for Windows 8.x: http://windows.microsoft.com/en-us/windows/show-hide-file-name-extensions#show-hide-file-n soul-extensions = windows-7

• How can I disable the warning of file extension when you rename a file?

  [img] http://imageshack.us/a/img141/8659/ * edithttp://i.imgur.com/JqDXN.png .png [line]: file called ' * off I know how work.png extensions so that it would not be displayed - reuploaded.

  Short answer: you can't.

  This prompt is 19 years old now.  I think we are all a little tired of it.  Feedback during a beta would be perhaps more advantageous.

• WRT160N guard dropping Internet when you transfer large files or using the Zune software

  WRT160N wired for 3 PC (only regularly on 1 - Vista), Wired XBox 360 on or off - does not seem to effect things) (normally closed) Wii wireless, wireless laptop Vista

  Everything works fine, except when I download either a file (for example when my Zune software is downloading podcasts each day), or when I transfer or access files on the network (copy or modification of the files of the laptop on the desk)-any attempt to do something on the internet is to expire. I don't lose my connection, just cannot get anywhere.

  Any help is appreciated.

  Recently, I made the following revisions, but have not seen a significant improvement:

  Wireless settings should be band Radio frequency should be 20 MHZ OF the self

  First check if the same thing happens the modem If yes contact you ISP.

  Please disable all firewall, antivirus and alarms on your computer and if the problem affecting the area.

  If then still reduce the MTU size to 1200 and update the firmware on the router, follow the steps to update the firmware of the router.

  Go to the Web site template linksysbycisco.com/downloads...insert in your serach tab... select the correct version of your router router... Download the firmware file... save this file on the desktop...

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router...
  In the address bar type - 192.168.1.1... Leave name empty username & password admin lowercase usage...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router... This should solve your problem.

• When you rename an address book via the properties, I see is no longer the new address book in my list. Where at - it go?

  I have about 30 different address books. Some of them where the old but I didn't want to delete them. I wanted them more at the top of my list I'm went to properties and adds 'z' - the name of the folder to the bottom of the list. Now, I can't see the address books that I have renamed. What happened to them and how to make them come back?

  Excellent news.
  You did exactly the correct changes in the right places.
  You could see that the description of file name for the file .mab was missing - the string was empty and if the actual address book is not in your address book list, even if it still existed in the profile folder.
  Good to hear everything is now sorted.

• When you save MHTML files, I get the icon of IE instead of Mozilla.

  When using Mozilla/Firefox, I can't save new files MHTML with Firefox icon icon - the seems to be the same as "text icon. Also, I can't use the "open with" to change the existing icons IE MHTML files to the Firefox icon. Some icons of FF are correct, such as the start icon FF on desktop and on the menu of the button 'start '. All other HTML files on the desktop and in folders still show the original icons of IE. By deep Googling, I find suggestions to remove "defaulticon" and other changes in the registry. None of them seem to work and make the problem worse.
  Using XP Pro, SP3.

  You have set as default Firefox browser?

• I would like to know how to clear the number of games you played when you play says number of plaid of games and not won matches. How do you get this back to zero?

  TRIE to deleate the numbers

  Hi lonabelle,

  It really depends on the game.  Many of the staistics provided standard games with Windows, including Solitare, can be deleted by clicking on the game-> statistics-> Reset.

  Hope this helps,

  Barbara

• Hi I have windows xp sp3 and recently when iam to rename a file or folder is to show that "If you rename this file .This will be unusable" so, how do I change it?

  How can I change it please help me...
  Visit this link for the dialog that I saw when I am trying to rename the file

  Looks like you are trying to remove the extension. Probably because you do not know its there - by default, Windows HIDES extensions knows it.

  Use Control Panel-folder Options (or select it from the Tools drop-down in Windows Explorer). Click the view tab and uncheck "Hide extensions for known file types", and then click OK.

  The name of your file will now show you its extension, i.e. the bit after the point. The extension defines what program will try to open the default file. If you change the extension so it can not open by double click.

  When you rename, do not change the bit after the point, unless you know it's the right thing to do.

  Tricky

• The files and settings to remove the old computer when you make a file and the transfer settings Wizard?

  The files and settings to remove the old computer when you make a file and the transfer settings Wizard?

  Hi KaraDay,

  When you use the files and Settings Transfer Wizard in Windows XP, it only transfers a copy of the files and settings on the computer.

  How to use the "files and Settings Transfer Wizard" in Windows XP

  http://support.Microsoft.com/kb/293118

• Delay of the dialog 'Copy the file' when you drag a file to a folder that already contains.

  Delay of the dialog 'Copy the file' when you drag a file to a folder that already contains.  The dialog box only appears when that I disconnect.  In fact this problem can seriously mislead the user. The file has been copied to or not? This is a serious shortcoming of the operating system.
  A similarly delayed dialog box is to join files on a send to the recipient of the message.

  What is the cause of the delay? Dialog boxes are not under other windows - they break on screen as I log out.

  When I drag AGAIN the same file in the same folder, then I get a message that "the action cannot be completed because the file is open in another program.  (No doubt the program who was trying to copy in the first attempt and waits for a response to the dialog box may not show me!)

  Hardware: Computer laptop Asus M70.  VISTA Ultimate with the latest patches.

  Lorien, thanks for your response.
  A lot of time and effort was exercised in an attempt to find out WHY. I wanted to not just fix the symptoms. It concerned me greatly as a basic function of the operating system does not work. He was not fit for purpose. In the end I found that a third-party application compromised of WINDOWS VISTA 32-bit operating system. If an operating system can not reliably inform the user that an operation is successful or not, it is worthless. In the case above, I didn't move the files was a success (no response required) or the delayed response until I signed.

  In addition to the original problem, there was the following problem: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/24068518-31e0-4b23-823b-d54882792301 where "send to..." 'Recipient' disable the context menu in Explorer for JPG does not or not broken.

  Finally, I figured out the following error had something to do with my problems:

  Description:
  The server {AB8902B4-09CA-4BB6-B78D-A8F59079A8D5} is not registered with DCOM within the required time.
  

  -

  -

   

   10010

   0

   2

   0

   0

   0 x 80000000000000

   

   198817

   

   

   System

   ASUS_M70VM

   

   

  -

   {AB8902B4-09CA-4BB6-B78D-A8F59079A8D5}

   

   

  Arriving in my solution, I was inspired by the following articles http://blogs.technet.com/markrussinovich/archive/2006/08/31/453100.aspx     http://blogs.technet.com/markrussinovich/archive/2006/11/27/532465.aspx
  So I downloaded the MS debug tools and confirmed my suspicion of dllhost.dll using REGEDIT to set debugging on that.
  To cut a long story short, it's DivX 7.2 which caused me grief.  In particular, the file DivXDecH264.ax 'has an access violation - code C0000005 (first chance).  It has been autonomous in DivX Plus DirectShow Filters.     Thus, when it has been deleted (starting other Articles to original install DivX) through Control Panel of configuration/programs and features my system worked perfectly well.

  I know SFA on the architecture of Windows but why was this DivX file loading and cause an access violation whenever I used the windows Explorer?  How an operating system may fail in a basic function of by a third party issue?  There are some newspaper where this access violation was recorded?  It was only possible to identify it in debugging?

  What you fella?

• When you copy a file in the same folder, is it possible to choose where "copy of" add original file name?

  When you copy a file in the same folder, is it possible to choose where "copy of" add original file name?

  Someone has an idea?

  No, it is not possible.