When you save the labels, they save as bmp files
When I try to save the groups tags that I am, they want to put in the form of bmp files. I just started having this problem Sunday morning March 6. When you save them before they were very good. I have never changed a setting or anything like that, so I don't know what the problem is. But it seems that I have to run a disk clean every time I save one in order for the next to be saved with the file extension, what it is, such as PNG or GIF. I hope you can help me with this situation. Very frustrating. I have Windows XP.
I suggest you to set the file on the file type associations and check if the problem persists. Click on the link below.
How to change or choose the program that starts when you double-click a file in Windows XP
I suggest give us the steps to recreate the issue on our systems so that we can have a better understanding of the issue.
Thanks and regards.
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think.
I installed the software to store 8 labels intermec for my label INTERMEC PF8t printer, when I try to open the message cannot create an empty document when you open the printer software labels appear. Help, please
· Did you do changes on the computer before the show?
· He has already worked on the computer?
Follow these methods.
Method 1: Uninstall and reinstall the software and check if it works very well.
How to change or remove a program in Windows XP
Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Startand then click run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
If the problem still persists, contact the manufacturer for more help and information.
When editing a jpg and then hit "save under" he suddenly began to save as a "file" instead of a jpg file and cannot be considered as a thumbnail or open by double-clicking. I right click and 'open with' and seen through windows image viewer... what went wrong and someone knows how to get it back to how it should be. I tried uninstalling and reinstalling but no joy...
You can have a 'illegal' character, more of a period or a space in the name of the file. Please post a typical file name, so we can take a look.
What is the difference between ' basic', 'Basic optimized' and 'Progressive' and what is best for each option?
Basic Standard is used when you want to than your JPG to be recognizable to most web browsers. It is basic and, well... standard! He made few changes in your image. Support all web browsers.
Baseline optimized optimises the quality of the colors in the image and produces a slightly smaller file size (2 to 8% - a little more compression, or slightly faster loading). All modern web browsers are supported,
* Standard and optimized to produce good quality images, so it's really just a matter of choice. "Baseline (optimized)" could reduce the size of the file slightly (2% or more) and might be inconsistent with viewers using the old technology. ". "Optimized'could produce better colors, but that might not be imperceptible.'" Progressive. "
Progressive departure creates an image that appears gradually as downloaded.means is that the image is rendered as (like old used televisions) scan lines so that a browser will quickly show image quality reduced by half the scan lines, while it resolves the entire image.
Verdict optimized base is the best choice among the three.
You can see this Overview of the picture Formats and when to use Each One
Don't forget that the JPG is a method "lossy" compression of image files - it throws image data before compression, so set your 'Quality' option to 'extended '. It is the key for image quality setting.
Otherwise, you should look for other Formats like Png
Hope that helps
How can I keep it 17.2 MB?
The level of jpeg compression is determined to save time, on a scale of 0-12. Higher number means less compression and less deterioration of the file. But even at high quality settings, a jpeg file will be reduced to about 2 to 10 percent of the size uncompressed to disk. JPEG compression is incredibly effective, that is why the format is so popular (and still useful where bandwidth is limited).
You can ignore safely (as opposed to the ppi) DPI. It is a technical specification of the printer out of place here.
Acrobat Standard XI. I use combine to edit and merge different files. When I add a DOC file and delete certain pages within this DOC file, these "deleted" pages remain in the combined output PDF file. What should I do?
First of all remove the pages in Word, and then save the document.
I'm following the instructions of setting up registration your apps: https://developer.blackberry.com/html5/documentation/signing_setup_smartphone_apps_1920010_11.html.
After typing the password and move the mouse around, I get a message, "ioexception when you save the new key pair". BB forums say that the problem is that my JDE is not installed, but it is. I'm also not using windows 7. Does anyone know how to fix this?
As for all my messages, within the hour to ask, I always find the solution.
However, it is normal that the instructions on the page webworks lack incredibly. I went with anger poster yesterday on the development of how awful all for blackberry is, and how absurd it is that there is no phone tech support. I decided yesterday against him because I felt bad for RIM as they seem to get into financial trouble. I've been on the fence about BB, and I tried to tell my friends that the newest smartphone looks like it could be promising. While it is true, I have not developed for BB 10 again, if it's developers resources also lack 7 are, I have no doubt that soon she will fail and I will give is more no support.
Don't know how to solve this problem. Saw the comments on changing the time zone, but I can't seem to find where to change this setting (within AI? or are they referring to my computer settings?) Have also tried to install the new Adobe CC 2014, but even that one goes down. Also, I rebooted the computer, but it's always the same problem.
Thanks for any help.
Try to "Place" instead of "Import".psd files When you place the images, you have the possibility to link the files and then again when you save as > EPS. You have probably inadvertently incorporated the .psd files. The right method of importing image files using the file > place command.
Establishment of model in the "Templates" folder in the root of the site. In this model, there is such a link "... / pic/tran.jpg", and "... /.. '. "/ pic/tran.jpg.
When you create the new file based on the current model links the first kind to "pic/tran.jpg" transformations and second - "file:///Y|/home/3dsfera/pic/tran.jpg".
What I have to do? How to preserve the original links in file created on the basis of the model.
If the links are correct in the model, based on where the model is
located, so they'll be correct in the pages of the child, anywhere
within the site save you. DW will manage these links for you.
If you see the absolute link 'file' persist after the registration of the child.
It may be because of one of these.
1 DW think that you linked to a page outside the local root
2 DW think you have saved this page outside of the local root folder
Did you one of the people?
Murray - ICQ 71997575
Adobe Community Expert
(If you * MUST * write me, don't don't LAUGH when you do!)
http://www.projectseven.com/go - DW FAQs, tutorials & resources
http://www.dwfaq.com - DW FAQs, tutorials & resources
"firefoxer_d" wrote in message
News:[email protected] Macromedia.com...
> What I have:
> Creation of model in the "Templates" folder in the root of the site. In this model
> There is such a link "... / pic/tran.jpg", and "... /.. '. "/ pic/tran.jpg.
> When you create the new file based on the current model links of the first kind
> changes in 'pic/tran.jpg' and second-
> 'file:///Y|/home/3dsfera/pic/tran.jpg '.
> What I have to do? How to keep the original links in file created on the basis
I use the helper downloader (ver. 2.2)
When you save a video of WWII on my Windows 7 Desktop, during the period of the video, I get points at equal distance between the screen and flashing arrow as well. What is the problem with my download?
Which may be caused by a problem with the codec that is used by this video and who is not taken care of correctly.
You can open this video in another video player to see if it works there?
What kind of video is it?
Original title: modifying the file save options
I use Invu to watch the old images. I no longer use it for the new scans. When you save the files, it gives me the option to save in the normal file type such as Word, Excel etc. It also gives the ability to save to Invu. How can I get rid of this option without uninstalling Invu?
It is not possible. When you set the file, it will display all related programs to open the files installed on the computer.
I have blackberry signing key IO exception when you save the new key file when trying to get my keys. I read the other post - I do not use Windows Vista and JDE component package is installed on my machine. What now?
It was a windows 7 resolved permission problem
When you save the file GIF grace to save for Web how can I save the original?
I need the original and not optimized. Help, please
But I need to GiF animation file
And by definition, a GIF image is optimized! A GIF is not the same size of the PSD file, and you are mistaken in thinking that you want it to be. If you are trying to achieve the slightest loss of quality, regardless of the size of the file, then you need to adjust your settings to save for Web.
CC 2015 Illustrator crashes when you use the function "save for Web".
We have published a 19.0.1 hotfix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately. If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.
Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html
The name of the Illustrator team engineering
I just got my new operational computer.
Mac Pro - Yosemite 10.10.3
Illustrator CC 2014_18.1.1
This seems a bit odd.
I created a file Illustrator CC.
I wrote then that file with a color. (Mac > file > Tag)
When I recorded this Illustrator file, the color tag is removed.
What is happening with this?
I never had this problem in the past with previous Illustrator and other Mac OS versions.
I tested other applications.
This ONLY happens when you save files Illustrator CC 2014.
Thank you in advance.
Post it here:
Maybe you are looking for
can anyone help.I need the audio drivers (harman/kardon). bad
Dear community, I installed the latest version of BIOS Toshiba offers for Windows Vista (v.1.80 21/08/07) and I'm running on Windows 7 on a Satellite A200 PSAECE. The fan is very VERY strong. I've heard talk of a solution would be to return to a prev
Hello I'm working on a VI that reads a lot of files csv (created by an application) using the built-in "worksheet File.vi reading" before combining in a report by using the excel report generation tool. 'All lines' are read in the csv file by using t
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: You have problems with programs Error messages Recent changes to your computer What you have already tried to solve the problem