When you switch on my PC

Similar Questions

• Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Having a printer at the office and one at home, but use the same PC for both? Unable to print at home after bring you it to the office (and vice versa)?

  If you USB, most of the time, the PC will recognize what printer is which. Sometimes PORTS does not commute. You can manually change the correct ports if necessary.

  CLICK ON THE MENU START

  1 devices and printers

  2 right CLICK on the printer

  3. choose the PRINTER PROPERTIES

  4. click on PORTS

  5. There will be a list of ports with one (checked marked). If it's on the wrong port, change to the right pair and choose APPLY.

  (NOTE: it must ALWAYS be on a USB port or a wireless connection.) Some ports wireless start with a #(adresse IP) or a SERIAL number)

  I hope this helps. Sometimes, you can create your own port if you have more questions.

• Favicons repeat through tabs, behind the label text when you switch between tabs. 37.0.1 sometimes the Green scroll bar does not have too

  Please mention the attached JPEGS. When I switch between tabs, favicon image repeated behind the text. In some cases, the image of the vertical scrollbar is messed up, it cleared up when I click on it. -Does not appear to affect performance, simply annoying. Thank you!

  Please temporarily disable your Avast extension to see if it has to do with it.

  Try Firefox Mode without failure:

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Portege M200: the screen is blank when you switch to Tablet mode

  Hello.

  Have a problem with my Portege M200 and after hours of searching for a solution, I'm still at a complete loss as to how to fix it.

  Essentially, when you attempt to switch to Tablet mode - or if I press the button cover closed 'sensor' on the far right, which is essentially the same thing: the screen goes black.

  This means that I can not in tablet mode at all.

  What happens across multiple operating systems and will happen even before that an operating system has started. Of course, I checked that when in Windows, the option "When I close the lid" is set to do nothing and I even checked for any cable setting in bios but saw nothing relevant.

  As far as I know this has only started happening since I sent it for repair with toshiba a month or two back (motherboard has been replaced I think).

  No way to control it via software or am I'm going to have to send it for repair again?

  > Like as far as I know that this has only started happening since I sent for repair with Toshiba a couple months back (motherboard has been replaced I think). Anyway to control this via software or am I'm going to have to send it for repair again?

  You description, it looks more like a hardware problem as a problem of software because this happens before an operating system has started. That's why I would exclude a software problem.

  In your case I would recommend you to contact the ASP again and explain the whole situation with your laptop.

  Good luck

• Is it possible to create discrete audio tracks in a multiclip (so when you switch to camera angles, you also pass audio channels)?

  For now, it seems the multiclip reference only the audio track in the foreground, each time I create a multiclip from a nested sequence. I wish I could pass the audio but also video tracks when changing the angles. In addition, the audio is external - not sure if that will make a difference or not.

  When you create your source multicam sequence, make sure to select "Switch Audio" in the pulldown sequence settings. Then, activate "Audio cameras following video ' in the key of the program monitor menu.

• Script stops when you switch to other applications

  Hello

  I found that in Photoshop (Mac - Snow Leopard Lion) several scripts stop with random errors when I switch to different applications (say, Safari, Mail, etc.) while they run.

  This regularly happens with Adobe "export layers to files...". «and «The files load battery...» "(which involve the loading and saving of files to and from the disk), in addition to my own scripts (which generally are not) - or PS CS5 and CS6.

  Is this a known issue? No workaround solution suggested?

  Thanks in advance

  Davide

  Yes Paul added to the code to program works around the problem he extract user setting made sure has been enabled end abd restored users setting.

  http://forums.Adobe.com/message/4530678#4530678

• Satellite A50. No color when you switch to the tv function

  How is it has no color when I'm on the TV?

  Hello

  There may be more than 1 pattern:

  The most common reason is that the machine displays the TV signal in NTSC format while the TV is built / set to PAL (or vice versa). Please check the videodriver to see if this setting is there.

  If your using a S-video connection to the television and the need a converter to connect this cable to the TV, it is also possible that the TV itself is not fully compatible with this type of signal. It could lead to a black & white experience. It should not be the case however if the TV is new.

  All this assumes that the cabling you are using are correct in all respects of course!

  Hope this helps

  BR

  Tom

• Why Labview block when you switch one application of TestStand to another?

  I have several 2013 TestStand applications that use a number of LabView 2013 screws on a test computer.  When the driver leaves a TestStand program and opens another often Labview does not close properly and therefore what TestStand tries to load the LabView VIs, it is caught or pass just and fails every test that is affected by LabView.  The only potential problems I know are that two of the applications have been created in LabView 2009 and then updated to 2013.  Then two other TestStand created applications in 2013 use the function 'UnloadAllModules '.

  Are there known issues with LabView 2013 causing it or ideas of what I could do wrong?

  Hello Michael,

  I found my problem.  In my case a VI don't was get closed in cleaning because of the previous command don't failed Manager correctly.  This VI would remain open and when I ran another TestStand sequence, when he tried to load that LabView VI he would just stroll.  But the result of this error could be seen when I closed TestStand and LabView are left open (since it was frozen) or execute the sequence and its closure.  So if you tried to LabView pop - up it wouldn't show the start start screen because it had frozen.

  I found the problem by activating the option view the façade VI in TestStand for all calls of VI.  The VI that remained open was the problem VI.

  Thanks to all who responded to your help!

  Kurtus

• How to fire an event with a Boolean button only when you switch on IT?

  Hi, I have a problem with my structure of the event: I use a value Boolean on/off button to launch a State (using producer consumer architecture).

  When I turn it on, my structure of event get "change value" and the code is executed.

  But when I turn it off, the loop in the code ends, but there is a problem: the event 'change of value' is activated again, and the code is run again.

  How can I avoid it? It is not 'on' or 'off' events to the event structure, only "value change.

  Here are a few screenshots, thanks in advance

  J.D.,

  Use the NewVal Terminal in the case of the event.  Who has the value of the control.  If it is true, queue the message.  If it is false, do nothing.

  Generally, it is better to have order in the case of events and to send messages to consumers through queues.  Nested loops as you seem to have can create difficult problems of what must happen when.  It is unusual for a state machine need a nested loop which requires intervention by the operator.  Without the VI all I can really say what you do, but I strongly suspect that there are way more robust and easier to do.

  Lynn

• Windows 7 when you switch users, windows black screen

  Dear support,

  After changing the user, windows cannot display, only black.

  The mouse cannot be used too much.

  only way to fix this is stop PC, reboot again.

  Why? How can I solve it?

  Thank you very much

  Hi Gaotonaldo,

  1. You get the error as well as the black screen?
  2. The problem only occurs in this user account?

  You might face this problem due to several reasons like software conflicts, outdated video adapter etc.. I suggest you to refer to the following Microsoft article and check if it helps.

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-AU/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• VPN disconnects when you switch users

  I use Windows 8 64-bit with two users. If I establish a PPTP VPN connection with a single user and then switch to another user (keeping the original logged-in user), the VPN is disconnected automatically.

  Is it possible to keep the VPN constantly connected? The computer is shared between employees who have their own office environments and disconnect the VPN cause all sorts of problems.

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

  I hope this helps.

• Toshiba l.335 laptop screen goes black when you switch application - execute a file say yes or no to change requests

  I have a Toshiba L355 vista sp2 running Norton 360, when I want to run a file to install or make changes to something my screen temporarily becomes darker when the trunk opens to allow actions, then goes black after that I have accept or decline and goes back to normal when it is time to complete the application as a finishing facility. It wasn't a problem before installing sp2

  Might want to check for an update for your video driver...

• I need to add several photos in a product on the Web site, the photo is added, but when you switch on it will not show

  www.RevolveClothing.com

  Example would be that you tackle self-portrait Designer click a photo see you on the left side.

  women / Designers/self-portrait/stripe mesh dress column

  3 photos are in the coloumn with the left hand, but you can't view them

  See the documentation for your Shopify theme.

  Models of theme - theme development - Shopify themes

  Nancy O.

• Warning when you switch to design mode

  Hello everyone,

  whenever I double-click a mxml, I get a warning inside Flash Builder 4.0.1 with Extension Builder 1.0.2 installed. The warning appears on the tab of problem and is more particularly related to "Design Mode".

  This is the message I get: "Design mode: cannot load csaw_indesign.swc...» ' or ' Design mode: cannot load apedelta_swc. I had a look at this log Eclipse (Flash builder) and got this:

  ! ENTRY com.adobe.flexbuilder.designview 4 1 2011 - 01 - 23 23:08:10.663

  ! Create MESSAGE mode: cannot load library.swf from/Applications/Adobe Flash Builder 4/plugins/com.adobe.cside.libsinstaller_1.0.2.201008271028/archive/csar-1.0/release/CSXSL library - 2.0 - sdk-3, 4 - public.swc, reason = ERROR: load verify

  ! ENTRY com.adobe.flexbuilder.designview 4 1 2011 - 01 - 23 23:08:11.211

  ! Create MESSAGE mode: cannot load 4/plugins/com.adobe.cside.libsinstaller_1.0.2.201008271028/archive/cslibs-1.0/3.4/release/Applications/Adobe csaw_illustrator.swc library.swf Flash Builder, reason = ERROR: load verify

  ! ENTRY com.adobe.flexbuilder.designview 4 1 2011 - 01 - 23 23:08:11.751

  ! Create MESSAGE mode: cannot load 4/plugins/com.adobe.cside.libsinstaller_1.0.2.201008271028/archive/cslibs-1.0/3.4/release/Applications/Adobe csaw_incopy.swc library.swf Flash Builder, reason = ERROR: load verify

  ! ENTRY com.adobe.flexbuilder.designview 4 1 2011 - 01 - 23 23:08:12.291

  ! Create MESSAGE mode: cannot load 4/plugins/com.adobe.cside.libsinstaller_1.0.2.201008271028/archive/cslibs-1.0/3.4/release/Applications/Adobe csaw_indesign.swc library.swf Flash Builder, reason = ERROR: load verify

  ! ENTRY com.adobe.flexbuilder.designview 4 1 2011 - 01 - 23 23:08:12.876

  ! Create MESSAGE mode: cannot load 4/plugins/com.adobe.cside.libsinstaller_1.0.2.201008271028/archive/cslibs-1.0/3.4/release/Applications/Adobe csaw_photoshop.swc library.swf Flash Builder, reason = ERROR: load verify

  ! ENTRY com.adobe.flexbuilder.designview 4 1 2011 - 01 - 23 23:08:13.416

  ! Create MESSAGE mode: cannot load 4/plugins/com.adobe.cside.libsinstaller_1.0.2.201008271028/archive/cslibs-1.0/3.4/release/Applications/Adobe apedelta.swc library.swf Flash Builder, reason = ERROR: load verify

  Is that normal or something I have to take care of?
  Best,
  Luca

  It is a known problem with the tooling and isn't something you need to worry. There is a bug filed against Flash Builder on this: https://bugs.adobe.com/jira/browse/FB-24178

• Is it possible to get the option "Switch to tab" higher when you type in the awesome bar?

  Hello

  I am currently under the latest version of Aurora and although I really like it, there is one thing that has bothered me kind of. I am often under more than 100 tablets at once and all of them to find the desired search tab takes a long time, so I would like to use the function "Switch to tab", but more often than not, this option is very far down the list of suggestions, causing me to miss them. So I would like to know if it is possible for this option as one of the first suggestions, instead of putting down in the list.

  Thanks in advance,

  xMyth

  Hello xMyth, I don't know if that's exactly what you're looking for, however when you start your search in the address bar with % it will be limited to open compressed only...