When you transfer files to the internet, the router disconnects from the internet, but the network remains in tact.

I have a wireless router Belkin g with 1 Server 2003 cable and 2 xp machines and 1 machine vista wireless. My problem is when you transfer files to the internet, the router disconnects from the internet, but the network remains intact. I cannot remote in all computers, but not internet. Once I have restart the router, everything works fine. I was wondering if anyone else has had this problem and how to fix them.

original title: problems with the router.

I have no solution for you.  It seems more likely to me that it is a hardware problem - but if it was related to traffic, I would expect that the problem on the downloads more downloads.

In addition to DSL reports, you could try to ask some of the forums that specialize in the updated firmware for wireless routers.  This is not to say that you need to install the modified firmware (although there may be good reasons to do so), but people who do usually firmware mods are much how the equipment works and what might be its potential failure modes.

Is one of the best-known sites DD-WRT.com, but there is one list of other here: http://en.wikipedia.org/wiki/List_of_wireless_router_firmware_projects the firmware on these sites was originally designed to run on Modem Linksys WRT54G, but applies generally to Linux with chips Broadcom - based wireless routers and DD - WRT claims that its firmware takes care of some Belkin routers.  If your router is one of those on what DD - WRT will work, there will probably be someone in the forum there will have something for you.  See the list here: http://www.dd-wrt.com/site/support/router-database

Tags: Windows

Similar Questions

  • My internet connection stops when you transfer files over a certain size.

    I have Windows 7 64 bit and a 30mbit cable DSL connection. I'm using an ethernet cable, no wifi.
    When using a browser (any browser - IE, FF, Chrome) and download a file over a half a MB or so attached (to an e-mail or a publication from CMS like wordpress), or when more than one download of attachments to the same email, my internet connection goes down and won't come back until I restart Windows 7.
    This problem is not known with other forms to download, such as passive background downloads (dropbox, torrent) or communication active high volume (such as hosting a local server for video games). Only with attachments.
    I tried uninstalling all virus protection, delete the browser history, removing all the programs with the shell extension (I heard that shell extension can sometimes cause these issues) and many other solutions. This problem seems quite clearly with the operating system, as happens in all browsers.
    This has become prohibitive for my work (I work from home) and I'm afraid to reinstall windows, as I update it. Any help would be greatly appreciated. Hours of research and many posts on of many messageboards geek (where many other people have the same problem) resulted in no fruit.
    Thank you.

    Well, Ajay K, I have some good news to report with the information that will be helpful to others.

    It turns out that the drivers for the Atheros L1 Gigabit Ethernet controller, when you use Windows 7, are unable to support the task of unloading. Therefore, the solution is to go to the Device Manager > network adapter > properties > advanced > task offload: value = off

    I'm really happy to have solved this, so I can stop running in my roommate's Office to file upload. No idea why it's only with attachments, but there you have it. I read about a guy who concluded that going back to beta win 7 drivers for its network card has also worked, but I guess it's because the Beta drivers have probably not unload on them or something.

    in any case, thanks for the quick response and I hope that others can avoid 3 months goose hunting on that I went.

    Here is a copy of the text of the error report so that people can more easily find this thread with google:

    The description for event ID 194 of source AtcL001 is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

    If the event is on another computer, the display information had to be saved with the event.

    The following information has been included in the event:


    Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller

    The specified resource type cannot be found in the image file


    Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller



    Binary data:

    In the words

    0000: 00000000 00340002 00040000 C00000C2

    0008: 00000000 00000000 00000000 00000000

    0010: 00000000 00000000 65300401

    In bytes

    0000: 00 00 04 00 02 00 34 00... 4.

    0008: 00 00 00 00 00 00 C0 C2... A... TO

    0010: 00 00 00 00 00 00 00 00...

    0018: 00 00 00 00 00 00 00 00...

    0020: 00 00 00 00 00 00 00 00...

    0028: 01 04 30 65... 0TH

  • When you try to view the networking of the Explorer, my explore crashes and windows have no reason why.

    I am currently running Windows 7 home, and as the title suggests, whenever I try to access the network in Windows Explorer, it crashes. Does it as well as I'm in safe mode with network. Any help will be welcome.


    1. What is the accurate and complete error message you get?
    2. don't you make changes to the computer before the show?

    Method 1
    I suggest you try the steps from the following link:

    Windows Explorer may hang in Windows 7 or in Windows Server 2008 R2

    Method 2
    I suggest you run virus scan online by using the Microsoft safety scanner.

    Microsoft safety scanner

    Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

  • Error 800703eb when you try to connect the network printer

    HII guys, can someone help me on this problem?

    I am trying to install the network printer. But I face the error code 800703EB and another description is cause to line 4 and 1 from vbs code tank.

    The following vbs code to connect the computer to the network printer:

    1. '
    2. ' Printers.vbs - Windows Logon Script.
    3. Set objNetwork = CreateObject
    4. objNetwork.AddWindowsPrinterConnection \\printserver\xerox2

    I am very grateful to the response of anyone on this issue, thank you very much.


    (1) have you made changes before the start of this issue?

    (2) what is the brand and model of the printer?

    Perform a clean boot and try to connect to the printer:

    Step 1: Clean boot

    How to set up Windows 7 to start in a "clean boot" State


    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Step 2: Try to download and install the latest printer drivers.

    Please visit the websites below:

    Install a printer


    Install a printer on a home network


  • How to change the width of key column when you view files in the Explorer window?

    Can someone help me with this one major annoyance I have with Vista?

    I opened an Explorer window and I want to resize the first column, so I can see the full file name.  (First I accidentally spend whole column name because I can't seem to find my mouse to keep the resizing grabber.)   Now that I have the desired column width, is it possible to make the column width by default for all future Explorer Windows I open?   I've grown very tired of having to resize this column whenever I open an Explorer window.

    Thank you!

    CTRL-click this link to read a thread of responses on increasing you the Vista folder settings memory.

    My user folder moves around:

    Here's another on a good tutorial

    View of folders:

    Messages rating helps other users

    Mark L. Ferguson MS - MVP

  • When you try to run the Network Setup Wizard, I get error loading rundll hnetwiz.dill.

    Trying to set up home networking on my windows xp, I get this message ("error loading hnetwiz.dll specified module is not found") I'm sorry I'm dumb as a box of rocks...

    Hello pat,

    You're trying to network the two versions of Windows by following the instructions in this article?
  • Call "HostNetworkSystem.UpdateVirtualSwitch" for the error of the object when you attempt to add the second NETWORK card

    Hi there - first post here, so please be nice :-).

    We are just trying to place an ESX4.1 own deployment in our environment (no previous installation of VMWare) to our main office, using Dell M610 and blades blades M600 to what would become our DR - two sites site hosting VMS on Equallogic iSCSI SAN disks.

    I configured 4 of our blade M610 with ESX 4.1 successfully and they work very well.  These blades have double NIC onboard, and after the initial installation of ESX, I could go to the virtual switch and add in the second NIC like vmnic1 (because one had already been detected during installation).  This fine workd for 4 guests on the M610 blades.  However, I came today to make my first installation on one of the old M600 blades and I encountered a problem.

    Installation went without any problems and I was able to add the host in my vCenter.  I can change all the settings without problem (created the Port of VMKernal for my connection to SAN iSCSI etc, but as soon as I try to add in the second NETWORK card, he paused for a while, and then I get the following error message:)

    Call 'HostNetworkSystem.UpdateVirtualSwitch' of object 'networkSystem-56 "on vCenter Server"VCEN01." ournetwork.local"failed. (network name has been changed for post).  When this happens, it locks up again for several seconds, and when the system returns, I can no longer communicate with the ESX host (Observer of events in vCenter watch 'host is not responding' and I find that I can not ping the host unless I reboot it.)

    If anyone has any suggestions I would appreciate it that I don't want to proceed down to the line with our Installer if theres an underlying issue and I need to redo everything.



    Do you get the same error when you try to add the network adapter by using the command line?

    1. esxcfg-vSwitch - L vmnic1 vSwitch0

    If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  • WRT160N guard dropping Internet when you transfer large files or using the Zune software

    WRT160N wired for 3 PC (only regularly on 1 - Vista), Wired XBox 360 on or off - does not seem to effect things) (normally closed) Wii wireless, wireless laptop Vista

    Everything works fine, except when I download either a file (for example when my Zune software is downloading podcasts each day), or when I transfer or access files on the network (copy or modification of the files of the laptop on the desk)-any attempt to do something on the internet is to expire. I don't lose my connection, just cannot get anywhere.

    Any help is appreciated.

    Recently, I made the following revisions, but have not seen a significant improvement:

    Wireless settings should be band Radio frequency should be 20 MHZ OF the self

    First check if the same thing happens the modem If yes contact you ISP.

    Please disable all firewall, antivirus and alarms on your computer and if the problem affecting the area.

    If then still reduce the MTU size to 1200 and update the firmware on the router, follow the steps to update the firmware of the router.

    Go to the Web site template linksysbycisco.com/downloads...insert in your serach tab... select the correct version of your router router... Download the firmware file... save this file on the desktop...

    Follow these steps to upgrade the firmware of the device: -.
    Open a page in Internet Explorer browser on a computer hard wired to the router...
    In the address bar type - Leave name empty username & password admin lowercase usage...
    Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
    Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

    Now reset your router:
    Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router... This should solve your problem.

  • Process Explorer error BES when you try to browse the files and folders; and Internet Explore AppHangB1 when you try to attach files to download in Windows 7.

    Hi everyone, auggy,

    I really hope you can help me with a problem I have on a single workstation at my office.  It is an accumulation of 32-bit Windows 7 running MS Office 2010 Standard.  It differs from other generations in our office because it is used by the head of the team of our accounts, and so it has a number of custom pieces of software that she only needs access (payroll software, etc.).

    All the basic features of the computers seem to be well, except the two following, and I would really like to help get to the bottom of it.

    (1) process explorer error when you try to browse the files and folders of BES.

    I can call Windows Explorer absolutely perfect and be sailing away on his machine, and then suddenly the process explore will die, with the following error: -.

    Signature of the problem:

    Problem event name: BEX

    Application name: explorer.exe

    Application version: 6.1.7601.17567

    Application timestamp: 4d6727a7

    Fault Module name: StackHash_0a9e

    Fault Module Version:

    Fault Module Timestamp: 00000000

    Exception offset: 03e2f944

    Exception code: c0000005

    Exception data: 00000008

    OS version: 6.1.7601.

    Locale ID: 2057

    Additional information 1: 0a9e

    More information 2: 0a9e372d3b4ad19135b953a78882e789

    Additional information 3: 0a9e

    Additional information 4: 0a9e372d3b4ad19135b953a78882e789

    Read our privacy statement online:


    If the online privacy statement is not available, please read our offline privacy statement:


    I can start windows Explorer, and it will happen again--it's a repetitive event.

    (2) Internet Explorer AppHangB1 when you try to attach files to download

    I think that these two errors may actually be related, like IE (and Chrome as well by the way, this be why I think that the two issues are related) works fine, until I just any type of site where I need to download a file.  This happened in the light, as our Chief of accounts needs to download a flat file in a room online banking software.  What's going to happen (and, again, this can be repeated as needed) is: -.

    (a) you need to click on which will generally be a "Browse" button

    (b) a traditional dialog box opens, but instead which allows you to navigate to the location and select the folder you want, he immediately greys out as if the process explore is falling.

    (c) shortly after, the following error is returned: -.


    A problem caused this program blocking interact with Windows.

    Signature of the problem:

    Problem event name: AppHangB1

    Application name: iexplore.exe

    Application version: 11.0.9600.16521

    Application timestamp: 53114399

    Hang Signature: ffae

    Hang Type:                                          513

    OS version: 6.1.7601.

    Locale ID: 2057

    Signing of additional blocking 1: ffaeadd6649c2780023c6d9ea230850d

    Signing of additional blocking 2: e32d

    Signing of additional blocking 3: e32d1064528f9bd1cbe46cdd0db7b0f1

    Signature of blocking additional 4:0498

    Signing of additional blocking 5: 0498e046eb6db4d68a7cd9b11dab2644

    Signing of additional blocking 6: effb

    Signing of additional blocking 7: effb796b5c1ff7f6708d2722fa7c24bd

    Read our privacy statement online:


    If the online privacy statement is not available, please read our offline privacy statement:


    On auggy recommendation, I've set up a registry key insert that returns the explorer.exe hangs in a dump file, and I am trying to load two reports on SkyDrive - I'll post the URL in this thread as soon as I finished it.

    Can someone help me please?

    Thank you very much!!


    Hi auggy, Andy,.

    Well... in a way, I am very disappointed, but we will respond to it.

    Andy, I checked and iCloud, Control Panel has not been installed on its terminal, but thank you very much for suggesting it :)

    auggi, when I got back on my colleague's PC, I thought I would test to see if the feature didn't always before considering saving data dumps etc, and it worked fine!

    I left it overnight with instructions for the lady who uses the PC to test this morning and see if it's all workers, and it is still, it seems that the fix does not immediately solve the problem of browser, but there later - maybe after a second reboot or something... very strange!

    In all case, this matter can now be considered closed, so all that remains for me to say thank you very much for your help, you are amazing :)

    All the best, very, very,.


  • When you transfer large files of network, all other requests are not sent to the server

    In our application, we are facing a weird scenario where we try to download a huge file(600+ MB) of the network, all other requests (AJAX) are getting blocked. But when the same file is downloaded from the local location (drive E) so that everything works fine.

    How do you download the file via the network?

    If you want to solve the bandwidth? and the nets where a process takes previous on the other, you will have to troubleshoot the QoS of the network on what see you.

    To give a better visual, please, use Firebug or Web Developer tool, called network analysis applications. The "XMLHttpRequest" will give better clues for Ajax. Reference http://ajaxian.com/archives/ajax-debugging-with-firebug

    There may be a topic: configuration option that allows persistent connections per server, you can check mutithreading or max.

  • WLAN speed when you are connected to the internet

    I use WRT54G2 V1 Wireless Router. My firmware version is 1.0.04)is.

    I connect to the internet via ADSL.

    Both computers are connected to the router, we have a connection cable, other is connected wireless.

    If I'm not connected to the internet, I can transfer files between them through 1.5MB/s-2MB/s. But, if I'm connected to the internet, the speed drops to 100 KB/s - 200 KB/s. My adsl connection has a bandwidth of 1 Mbps (about 128 KB/s).

    Has anyone faced similar problem? No idea what to do?

    You said that you receive the Internet wireless at 100-200 Kbps (kilobytes per second), but I guess you're saying 100 to 200 Kbps (kilobits per second).  If you actually get 100 to 200 Kbps, so it is faster than your reported 1 Mbps line speed.

    A wireless connection is more important than a wired connection.  If most users, when connected wireless, get only about 50% to 70% of their wire speed.  So I'm expecting a 1 Mbit/s connected to the Internet, you should be able to get 500 to 700 kbps (kilobits per second) = approximately 50 to 70 Kbps (kilobytes per second) when connected wireless.

    When you file transfer from computer to computer on your local network, your speed is limited by 54 Mbps Wireless g your connection speed, which can provide a data rate up to 20 to 25 Mbit/s.  It is clearly much faster that your 1 Mbit/s to the Internet can provide data.  So that explains why the transfer of files on your local network is much faster than your wireless Internet connection.

    So, the only real problem I see is that your speed of your WAN (Internet) port to the wireless local area network computer seems to be slow.  The most common cause of this problem, is the default to reset the router by default after a firmware update.

    If you did not reset to the factory settings since the last update of the firmware, please do it now and see if it solves your problem.  After the reset, you must configure the router again from scratch.  If you have saved a router configuration file, DO NOT use it.

    To reset your router by default, follow these steps:

    (1) turn off all computers, the router and the modem and disconnect from the wall.
    (2) disconnect all the wires of the router.
    (3) turn on the router and let it start up completely (1-2 minutes).
    (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
    (5) turn the router.
    (6) connect a computer cable to port 1 of the router (NOT to the internet port).
    (7) turn on the router and let it start up completely (1-2 minutes).
    (8) the power of the computer (if the computer has a wireless card, make sure it's off).
    (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
    (10) open your browser and point it to This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen). Exit your browser.

    If you get this day without problem, try the Setup disk (or configure the router manually, if you prefer) and see if you can get your work and router configuration.

    If you can not ' response to... ". "in step 9 above, your router is probably dead. A report with this problem

    If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. Related to this issue.

    If you need additional assistance, please indicate your ISP, the make and model of your modem, the firmware version of your router and the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.

    Please let me know how things turn out for you.

  • internet access - I always get 'pending on the cache' when you try to access the Internet

    Why do I always get 'pending on the cache' when you try to access the internet

    Hi reneamayo,

    1 Windows operating system you are using?

    2. what browser do you use?

    3. If you are using Internet explorer, what version of IE are you using?

    4. When did you start to question?

    If you use IE, then you can try to run the Fixit mentioned in the link below and check:

    Improve performance and security in Internet Explorer


    You can also check out the following link and try the steps:

    How to remove the contents of the temporary Internet files folder


    Hope this information is useful.

  • the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I am disconnected and then reconnected___

    the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I disconnected and then reconnected.

    I just ran windows update on a large number of files all successful before this happened, it happens when I am connected to the internet, I use dial-up access

    added on 25/11/09 still have the problem mentioned above, even explore two windows are runnibg on the system, or two IE browsers running?

    Added 27/11/09 I ave followed all instructions up to and including thefix tool kb/93623, stiil I have this report of windows Defender quickly appearing twice in a row, then I'm disconnected from the internet. any more ideas thanks sam

    Visit this link:

  • When I transfer files from my hard drive on a USB flash drive, the transfer rate is very slow, about 250 KB / second. Is it possible to increase the speed of transfer rate

    When I transfer files from my hard drive on a USB flash drive, the transfer rate is very slow, about 250 KB / second. Is it possible to increase the speed of transfer rate

    depends on the speed, support USB 2.0, USB 2.0 ports, and with active BIOS settings

    (2) you can increase the speed, if your motherbaord has a USB 3.0 port and must be enabled in the BIOS

  • 42 error code when you try to delete the file

    PDF file which can be opened and read.  However, when you try to delete the file, error file not found 42 made its appearance.  MacBook Pro computer

    Please relaunch the Finder , and then try again. If there is no change, restart the computer.

Maybe you are looking for