When you try to connect from my vista desktop to my laptop windows 7 through the DRC I get the error "unable to connect to the gateway terminal server."

Similar Questions

• Print the error message when you try to print from a Vista network printer

  I have 2 computers and 1 printer. Usually, when I wanted to print computers I unplug the cable to a computer printer and plug it into the other computer. Now, I use a USB switch with computers and a printer plugged into it so I won't have to unplug the cable from a computer and move it to another. The problem is that I get the constant pop-up message that says "Windows - writeback failed. Window could not save all the data for the E:\$mft. The data has been lost.

  What should I do to fix this?

  Thanks in advance,

  Hi Hydnah45,

  ·         When exactly do you get this error?

  ·         You have windows XP INSTALLED on your computer?

  Try these steps if you have windows XP INSTALLED on your computer.

  Step 1

  To resolve this problem, first check whether the feature 'Turn on disk write caching' is lit. If it is enabled, disable it. To do this, follow these steps.

  To disableActivate the disk write cache, follow these steps:

  1. click onStartand then click my computer.

  2. right click on the hard drive, and then clickProperties.

  3. click on thehardware tab.

  4. Click to select the hard drive, and then clickProperties.

  5. click on thepolicies tab.

  6 clear the boxenable the disk write cache , and then click OK.

  7. clickOK to close the disk Local (c) properties dialog box.

  8. Repeat steps 3 through 5 for each hard disk that is installed on your computer

  Step 2

  Make changes in the registry

  1. start the registry editor.

  2. Locate and then click theenablesecuritysignature under the following key value in the registry:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Lanmanserver\Parameters

  3. on theEdit menu, click modify.

  4. in thedata value: box, type 0, and then click OK.

  5. exit the registry editor.

  6. stop and restart the service server,or restart the computer

  Important: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  If you have windows 7 installed on your computer try running printer utility.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  I hope this works.

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you try to connect to web sites like AKO .mil I am now told I have invalid certificates.

  invalid certificates

  When you try to connect to web sites like AKO .mil I am now told I have invalid certificates.  I have connected to this site from this computer several times in the past.  I contacted toshiba technical support and they said I don't have gpedit.msc - Group Policy Editor and need to have installed to solve my problem.  can you help me?

  Hello

  1. What version of Windows is installed on the computer?
  2. What browser do you use?

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/certificate-errors-frequently-asked-questions

  It will be useful.

• Network error when you try to read from C:\Windows\Installer\iTunes.msi

  Original title: error when you try to install iTunes on Windows Vista
  I am trying to install the latest version of iTunes available in South Africa. I use Vista to the Windows Welcome page.

  I downloaded the itTunessetup.exe file, but when I try to run the installation, I get the same message "network error when you try to read from C:\Windows\Installer\iTunes.msi.
  I am at a loss to understand this - I'm not much of a PC expert either.
  Any suggestions? Thank you

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. I suggest you follow the troubleshooting steps to check if this may help.

  Method 1:
  Run the fix it and check.
  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  You can completely uninstall older versions of iTunes installed on the computer, then I suggest you to install the latest version and check.
  Download link

  http://www.Apple.com/iTunes/download/
  
  Method 3:
  You can try the form as follows article knowledge base and check if you are able to install iTunes.
  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/HT1926

  Reference link:
  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  If the problem persists then you can contact iTunes support: http://www.apple.com/support/itunes/
  Just reply with the results. I'd be happy to help you more

• When you try to connect to internet it sometimes makes other times it doesn't.

  Sporadic internet connection

  My friend has a very annoying problem with the PC! When you try to connect to internet it sometimes makes other times it doesn't.
  The desktop pc is connected to the router/modem (D-Link WIFI ADSL 2 + G6242) via the ethernet cable, it communicates with the router, but
  not between the router and the net!
  I can connect without problems with laptop wireless, which indicates that the problem is with the Office
  and not the router!
  I suspect that the Office might be infected with malicious software. I've updated all the thing and run Malwarebytes, Spybot
  Search and destroy and Avast AV, nothing malicious is reported.
  I have restored to previous restore points, but the problem persists. It may be a corrupt file but which!
  I would have preferred to resolve this problem, otherwise I'll have to do a restore of the system Dell Factory!
  I'd love to help with this problem appreciate.

  Specifications of the PC;
  PC is connected to the router/modem (D-Link WIFI ADSL 2 + G624T)
  REB PC
  Computer:
  Computer Type ACPI (Mobile) 86 x PC
  Operating system Microsoft Windows Vista Home Premium 6.0.6002 (Vista RTM)
  Date: 2010-04-26
  Time 16:19
   
  OS Service Pack Service Pack 2
  Internet Explorer 8.0.6001.18904
  DirectX DirectX 11.0
  Motherboard:
  CPU type DualCore AMD Athlon 64 X 2, 2600 MHz (13 x 200) 5000 +.
  Card mother name Dell Inspiron 531
  Motherboard chipset nVIDIA nForce 6100-4xx, AMD Hammer
  Memory 2048 MB (DDR2 - 667 DDR2 SDRAM) system
  DIMM3: Hynix HYMP112U64CP8-Y5 1 GB DDR2-667 DDR2 SDRAM
  DIMM4: Hynix HYMP112U64CP8-Y5 1 GB DDR2-667 DDR2 SDRAM
  Type of Award BIOS (09/11/07)
    
  Display:
  NVIDIA GeForce 8300 GS (128 MB) video card
  NVIDIA GeForce 8300 GS (128 MB) video card
  Accelerator 3D nVIDIA GeForce 8300 GS
  Monitor Dell E207WFP (digital) [20 "LCD] (YM30682B6CFL)
    
  Multimedia:
  Audio adapter Realtek ALC888/1200 @ nVIDIA nForce 6100-400/405/420/430 (MCP61) - High Definition Audio Controller
    
  Storage:
  IDE controller NVIDIA MCP61 Serial ATA Controller
  IDE controller Standard dual channel PCI IDE Controller
  Storage controller Microsoft iSCSI Initiator
  Hard drive WDC WD50 00AAKS-75YGA SCSI Disk Device (465 GB)
  PBDS DVD +-RW DH - 16W1S SCSI CdRom Device optical drive

  Network:
  Main IP 192.168.1.2
  Primary MAC address
  Network card NVIDIA nForce Networking Controller)
    
   
  DMI:
  DMI BIOS vendor Dell Inc.
  DMI BIOS Version 1.0.7
  DMI system manufacturer Dell Inc.
  DMI system product Inspiron 531
  The system DMI 00 version
  DMI system number 5NNFJ3J
  DMI system UUID 44454C4C-4E00104E-8046B5C0-4F4A334A
  DMI Motherboard manufacturer Dell Inc.
  DMI Motherboard product 0RY206
  [NVIDIA nForce Networking Controller]
    
  Properties of the network adapter:
  Network card NVIDIA nForce Networking Controller
  Interface Type Ethernet
  Hardware address
  Connection connection to the Local network name
  100 Mbps connection
  MTU 1500 bytes
  DHCP lease obtained 26/04/2010 16:01:26
  DHCP lease expires 26/04/2010 17:01:26
  Bytes received 3931673 (3.7 MB)
  Bytes sent 279120 (272.6 KB)
    
  Network adapter addresses:
  IP / subnet mask
  Entry door
  DHCP
  DNS
    
  Manufacturer of the network adapter:
  Company name NVIDIA Corporation
  Product information http://www.nvidia.com/page/mobo.html 
  Download driver http://www.nvidia.com/content/drivers/drivers.asp 
  Update drivers http://driveragent.com?ref=59

  That's what shows in ipconfig/all, when it does not connect to the internet.
  Although I can connect with laptop computer when this happens on the desktop!

  Microsoft Windows [Version 6.0.6002]

  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\>ipconfig/all

  Windows IP configuration

  Name of the host...:-PC
    
  Primary Dns suffix...:
    
  Node... type: hybrid
    
  Active... IP routing: No.
    
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
    
  ... Description: NVIDIA nForce Networking Controller
    
  Physical address.... : (I have hidden for security)
  DHCP active...: Yes
    
  Autoconfiguration enabled...: Yes
    
  Autoconfiguration IPv4 address. . : 169.254.163.97 (Preferred)
    
  ... Subnet mask: 255.255.0.0.
    
  ... Default gateway. : 0.0.0.0.
    
  NetBIOS over TCP/IP...: enabled

  C:\Users\ >

  Of course, it does not show what it should show such as;

  Lease obtained...:
  Expiry of the lease...:
  ... Default gateway. :
  DHCP server...:
  I tried to reset with the following commands unsuccessfully;

  Start, all Programs\Accessories and right click on command prompt, select "run as administrator" to open a command prompt.

  In the command prompt window, type the following commands, each followed by the Enter key:

  Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log

  Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log

  Reboot the computer.

  Microsoft Windows [Version 6.0.6002]

  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\Stebex>ipconfig/all

  Windows IP configuration

  Name of the host...: Stebex-PC
    
  Primary Dns suffix...:
    
  Node... type: hybrid
    
  Active... IP routing: No.
    
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
    
  ... Description: NVIDIA nForce Networking Controller
    
  Physical address.... : 00-1A-A0-80-67-76
    
  DHCP active...: Yes
    
  Autoconfiguration enabled...: Yes
    
  Autoconfiguration IPv4 address. . : 169.254.163.97 (Preferred)
    
  ... Subnet mask: 255.255.0.0.
    
  ... Default gateway. : 0.0.0.0.
    
  NetBIOS over TCP/IP...: enabled

  C:\Users\ >
  Would appreciate help please!

  Problem solved by a relocation complete!

• error when you try to connect to the internet via a modem usb - 6 error: the handle is invalid

  error 6: the handle is invalid - I see this error message when you try to connect to internet via usb modem

  I'm using windows Vista Home Basic and attempts to connect to the internet via a usb Huawei modem.

  but when connect this device on windows xp pro his works very well.

  but with vista I see this error msg

  The handle is invalid

  any idea to solve this problem?
  Thank you

  You can get in trouble with your device drivers, firmware and/or software.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you shouldat least make the modem and everything you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  Try to uninstall and then reinstall the modem again.  Remove the modem through Control Panel > phones and Modems, then uninstall the modem in Device Manager. Once the reboot is complete and it is reinstalled it should work (as long as you use the update of the above paragraph).  Make sure that you uninstall in this order.

  Are you sure that the modem is compatible with Vista and the rest of your system?  What is the manufacturer, brand and model?  You can find here:http://www.microsoft.com/windows/compatibility/windows-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Get the error 0xc00d11cd when you try to connect to applications

  I have a Microsoft Surface with Windows RT and since I got it I could not connect to most of the applications and others cannot access the internet at all.

  When you try to connect to all the apps from Microsoft I still get error 0xc00d11cd (0x82bc0005) and it just says: Please try again.
  This happens in music, video, games and apps Xbox SmartGlass.
  Also I tried multiple games, including all the Xbox games and other apps like Shazam simply cannot connect to the internet or connect to all the.

  Looks like people, email, SkyDrive, shop, E-mail and weather join the end network.
  Troubleshooting my network found no problem

  I tried to uninstall and reinstall applications and making a whole "refresh your PC" without success.

  Any help?

  Hi, jonathons11a
  in fact, this is the case, I had the same problem and he went just by logging on XBOX.com
  I maintain the money account, but the service works well.

  I think that this must be marked replied.

• Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit.

  Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit. I tried in

  safe mode and it starts to install, but get an error there as well.

  What should I do?

  So when you put the disk in it does not work properly? When the disc is inserted, you should have a window pop up with 2 options. 1. install and another to see what is on the disk. Choose to open the disc or explore. Navigate to the folder where is the photoshop CS4 .exe file (which runs the Setup program), right-click on the .exe file and choose Run as administrator and it should start. See if it will install. If this isn't the case, then read below.

  I don't know how long you got in the installation until so chances are, you will need to run the CS4 Cleanup utility. 2 levels to run but do not use 1 or 2 just type number 3.

  http://www.Adobe.com/support/contact/cs4clean.html

  You may need to run the utility windows install cleanup too

  http://support.Microsoft.com/kb/290301

  Before you try to reinstall the software make sure that adobe reader is not installed. If it is delete. It has caused problems in the past with vista and CS4 installs.

  You can also disable windows Defender and all antivirus software. You can keep UAC Windows 7.

  When installing CS4 to 90 percent, it stops almost and may take 5 to 10 minutes at the end. It's normal. What a pain huh...

  After the installation is complete, restart

  After restarting, go to the icon of CS4 64-bit or 32-bit (depends on 32-bit or 64-bit Windows 7) in the starting area, right-click on CS4 64-bit (if you have windows 7 64 bit), and then choose Properties, Compatibility tab, and then check run as administrator at the lower part. Hit apply, ok to finish.

  Now, run CS4 and run the update.

• When you try to connect to a Yahoo link, like yahoo mail, I get (error code: ssl_error_bad_cert_domain)

  This connection is Untrusted

  You asked Firefox to connect safely to we - mg5.mail.yahoo.com, but we cannot confirm that your connection is secure.

  Normally, when you try to connect safely, sites will present a reliable identification to prove that you're in the right place. However, the identity of this site cannot be verified.

  You use a bookmark to open this link?

  If you then try to open the page https://mail.yahoo.com/ instead and, possibly, change the URL of the bookmark to delete the foreground we mg5

  It is generally not a good idea to bookmark the pages directly as long as such links to specific areas can become valid.

• I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

  I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

  It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

  Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

  If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

  As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

  But it's your call.

• Keep gettig this error message when you try to connect to Firefox, the proxy server refuses connections.

  Redownloaded Firefox and keep getting this error message when you try to connect: proxy server refuses connections

           Firefox is configured to use a proxy server that is refusing connections.
  

   Check the proxy settings to make sure that they are correct.
   Contact your network administrator to make sure the proxy server is
     working.
  

  Go to Options > advanced > network > connection > settings, then choose 'no proxy '.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  It is important that you keep updated IE. The information included with your question indicates that you use IE7; you need to update to IE8 for your own protection. IE9 will be available for Windows XP.

  • http://Windows.Microsoft.com/en-us/Internet-Explorer/products/IE/home

• Forgotten mini iPad 3 password, so I restored to factory settings, and now, when you try to connect back apple we still wonders of forgotten password!

  Forgotten mini iPad 3 password, so I restored to factory settings, and now, when you try to connect back apple we still wonders of forgotten password!

  If you have forgotten the password for your iTunes account (if you have settings > iCloud > find my active iPad you need to enter the id and password to reactivate the iPad): http://iforgot.apple.com

• Get the Error Message When you try to download and install Vista Service Pack 1

  Hello

  Update Windows guard neglect when you try to download and install Vista Service Pack 1 and I get the error message 80092004.  Please notify.

  Thank you
  Andy

  Hello

  Welcome to the windows vista forums.

  1. stop the Windows Update service (make sure that you are logged on as administrator)

  Click the Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click on stop.

  2. Click Start, type %windir%\System32 in the search box and press ENTER.

  Find and rename the folder C:\Windows\SoftwareDistribution.

  3. start the Windows Update service

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click Start.

  This procedure will erase your history on the Windows Update Site. Not important.

  Don't forget to restart and then try the update again. If there is no corruption in that
  folder, it would be gone now.

   

  Please, try now to windows update and check if you get the error.

  You can also download the stand-alone SP1 package. You can download the windows vista SP1 by clicking on the link below, please follow the instructions in method 3 in the KB article:

  http://support.Microsoft.com/kb/935791#Method3

  I hope this information is useful.

  Please let us know if you need further assistance.

  Concerning
  Rehman - Microsoft Support

• ieframe error when you try to connect to yahoo canasta.

  Original title: error ieframe

  Tuesday night, I played canasta to yahoo.  I was not able to connect and play since then.  I get the following error... Please help!       RES://ieframe.dll/acr_error.htm#Yahoo.com, http://games.yahoo.com/games/login2?page=ca&ss=1

  I went to the microsoft website.  I had already cleared cache etc. etc.  I have RESET Internet explore and that got rid of the ieframe error.  Then, I was able to get into yahoo but could not go to a room.  Then, I uninstalled java and reinstalled.  I was then able to go to a room but not to make a table.  I checked the "add ons" and made sure to activate all the java.  I am now able to play canasta to yahoo.  I think that yahoo reset things because others spoke it as and when you try to connect... the screen where you must copy the letters and numbers you see... the page is HUGE and I have to zoom to 75% to get to the screen where I have to watch.  Even this screen I had to make smaller... so I have a few questions to understand.  Thank you for having responded so.

  Hello

  1. do you use the Internet Explorer browser to connect to the mentioned Web site?

  2. If so, what is the version of Internet Explorer?

  3. can you play a different game on the website or other sites?

   

  Method 1: Follow the link below:
  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246

   

  Method 2: please follow the link below:

  Internet Explorer is slow? 5 things to try:

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

• 0 x 80070035 and 0X80004005 error codes when you try to connect to other computers and devices on the same network - unable to connect to the shared devices.

  I have a network consisting of Windows 7 laptop computers, an XP laptop and a Wireless Linksys (Cisco) WRT610 N + N with storage attached to it via its USB port.  Your PC Windows 7 has, since I can see and access to other computers and devices on storage.  Since Windows 7 PC B I can not connect (via the file manager) to A PC or NAS storage network.  Get such as 0 x 80070035 and 0X80004005 error codes when you try to connect to the IP address on the device name.  When I ping the devices of PC B I have no trouble to achieve.

  I turned off all firewalls, added the LMHOST file entries and a myriad of other tests and still cannot connect to PC B devices.  I can surf the net fine and do everything else - simply cannot connect to other devices even if these other devices can connect to me.

  I was in there for 22 years and has worked as an engineer on major networks and the network I stem - anyone got any idead. I checked all the basics such as Netbios, file sharing etc etc.

  It took a reinstall (upgrade) to get actually it works again.