When you try to copy a .jpg file in another folder I get an error "unexpected error prevents the operation."

Similar Questions

• Get the "Access denied" error when you try to play all video files in another folder on my external hard drive.

  A couple of days, I've had accidentally one of the folders slipped on my hard drive in the folder above him and was presented with the "Access denied" error messages when I tried the two a) reglisser it out & b) open it from the record she had been driven to (which was not a folder of my making that is a jibberish titled folder containing two .vdm files it contains first)

  After receiving advice of a friend, I did a restore from safe mode on the eve of the day when he moved and he did bring him back with all the files and files in the right place, but now I'm getting an access denied for each file, I try to play. Whether Real Player, Windows Media Player etc none will play.

  Just to test, I slipped a .avi file in the folder to see if he was going to play and he did it can be the folder settings, I'm just hoping that all these files are now not corrupted and unplayable as I have some 180 GB of data in this folder in more than 1000 files.

  Any help is very appreciated.
  Kind regards
  Haley

  Hey HRolston,

  What version/service pack of XP are you using?

  What format of your hard drive is formatted to?

  You can check the version/service pack:

  ·         Click Start

  ·         Right click my computer

  ·         Click on Properties

  ·         On the general tab, under System: you will see your information

  For example: Microsoft Windows XP Professional, Version 2002, Service Pack 3

  You can check what is the format of your hard drive is:

  ·         Click Start

  ·         Click on my computer

  ·         Right click on Local disk (c) (or letter that contains your operating system)

  ·         Click on Properties

  ·         On the general tab, next to file system: you will see the format of your hard drive (Fat32 or NTFS)

  Can't wait to hear back on your part.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When you try to share my internet connection via AD HOC I get this error: "an error occurred while internet connection sharing was being enabled. the dependency service or group was able to start. »

  original title: cannot share internet

  I shared my internet via ad-hoc, using my wifi in my laptop running vista 64-bit. It just stoped working and now I get a message saying

  "an error occurred while internet connection sharing was being enabled.   the dependency service or group was able to start. »

  Hello

  You can view the article in the Microsoft Knowledge base and check if it helps.

  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to" " "»

  http://support.Microsoft.com/kb/946481

  Let us know if you need more assistance.

• When you try to install my Canon printer... I get an error "spooler"...

  I had a problem with my PC recently, and a person allowed to get out of my PC. So I have to reinstall my printer (Canon iP2600), I have the disc. When I get to the part of the installation, it gives me a printer spooler error msg. It says to restart the PC and it should work. I am not real computer savy, so I don't even know what is a printer spooler. But I restart and not luck. Can help you with this situation? Pls... Kathy

  Hi Granprixgirl,
   
  1. What is the exact error message?
  2 what is the make and model of your printer?
  3. who is the operating system installed on your computer?
   
  Follow these steps below to check if the print spooler service is running.
   
  1. Click Start, type services.msc and press ENTER.
  2 scroll down to print spooler.
  3. check if the services are not stopped.
  4. If stop, then I suggest you do a right click on the service and select automatic.

  After the automatic configuration, you can check the question and please post back the result.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Windows Explorer crashes when you try to copy a file

  Win xp Pro

  When you try to copy a file using windows Explorer, the application crashes. I tried to use select times of right mouse and select menu with the same results.

  All solutions short of re - install XP

  Win xp Pro

  When you try to copy a file using windows Explorer, the application crashes. I tried to use select times of right mouse and select menu with the same results.

  All solutions short of re - install XP

  This happens with any file or a particular file?

  Have you tried the copy command from a command prompt window (start > run > cmd > OK)?

  For the full syntax of the copy command, see http://technet.microsoft.com/en-us/library/bb490886.aspx

• When you try to copy a. DAT in Vista file, get error 0x80070057L, the parameter is incorrect

  I tried to copy a *. DAT file from a CD on my HARD drive. During the last 5 seconds, I always get the following error message:

  Error 0x80070057L the parameter is incorrect

  I am able to open the file, but can not copy. I tried on my laptop (Vista SP1) and on an another desktop running XP and get the same error.

  What causes this problem?

  Hello

  The problem occurs when you try to copy other files?

  Check if you can copy files in Mode without failure.

  Refer to this article for help:
  http://Windows.Microsoft.com/en-CA/Windows7/start-your-computer-in-safe-mode

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• File modified icons and error when you try to copy files: 0 x 80070052

  ll of a sudden, I found my Word document files, pdf and other files differnet looking and I got this message eorro 0 x 80070052 when I tried to copy

  I tried to solve this problem, but I forgot:

  I have norton antivirus on my pc and windows vista, I suddenly found that all my files (documents, photos odfs... etc) all have a strange icon placed in the original top icon it looks like Media Player. I can open them on the pc, but I have treid to opencoy to my USB, he initially said no space and I deleted files. ND, then I tried to copy these fields to it, I got this error message:

  0 x 80070052

  and I think that it is aa problem with my antivirus it diesnt run correctly.

  pelase advise I can't afford lossing my documents.

  Thank you

  Hello

  Error 0 x 80070052 occurs usually when you try to copy files to an external storage device. You can format the drive to the FAT32 file system format and check if this solves the problem.

  Come to your icons of files problem, I suggest you perform a system restore to restore the computer to an earlier point in time before the problem occurred.

  See these articles for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Robocopy hangs when you try to copy a file which in use

  Hello

  I find that Robocopy hangs when you try to copy the file using, for example an Outlook .pst file. The behavior of Vista was not to copy the file according to the retry and wait switches from command line, which allowed the backup race move to the next file and finally finish. With Windows 7 the Robocopy session is suspended and resumes ever, even if the file she is trying to copy is closed.

  Is this behavior under Robocopy in Windows 7? Is it possible to get Robocopy to move to the file according to when he's trying to copy a file that is in use?

  Thank you

  Jason.

  "There is no need of me a pause in my script"-Yes, I understand [and should have done before].

  I just tested a network for the first time operation.  It hangs forever as your done even after I closed Outlook & waited for the w: 30 I put.  {I also ran with closed Outlook the first time just to make sure that the network itself had no problems}

  I read that you have provided the link.  This suggests that there is no solution.

  - - - - - - -

  You seem to be doing a lot more & probably more structured than mine operation, this workaround might not be of any use to you.  The other open files issue concerns a simple hourly backup of my kernel files that includes pst files.

  1 I xcopy all the files in a folder internal InterimBackup first.  Can I use XCopy or RoboCopy to send InterimBackup to the real destination.

  2 If Outlook is open then it will copy on InterimBackup and, if the previous Outlook.pst is still in InterimBackup she gets deleted by the attempt of xcopy.  [conclusion - XCopy verifies the existence of the replacement of a file, deletes it and only then discovered that the source file is locked and cannot be copied.]

  So I precede this with

  0 I run [if exists] copy D:\InterimBackup\Outlook.pst to D:\InterimBackup\Outlook2.pst

  The result is that whole process always ends but it only includes the last Outlook.pst that was available.  So I always make a point of Outlook to quit at some point during the day so that he could take part in this backup.

  If you have also tried this as a two part operation, your xcopy / robocopy in the folder InterimBackup would always succeed but would include only Outlook.pst if you had first closed the application.  Subsequent operation of RoboCopy would always succeed with the same possible omission.

  The downside of this might not suit your overall goal.  You'd have to RoboCopy separately all your others folder trees but keep the Outlook.pst in a tree that has not been included.  You could do this either by restructuring of your data or using RoboCopy exclude switches for the file Outlook.pst file.

  You have to accept that you might not be sure about the last time that the Outlook file had been included unless you had deliberately run the RoboCopy closing.

  I have reviewed this improvement by using Task Scheduler to respond in the event of closing Outlook and use it to initiate the copy outlook.pst to InterimBackup, then by running the part of the main operation on RoboCopy to this folder.  But my needs are so simple that I've never felt it's the logs of the events that I would have to put in place.

  As I say, it may not meet your needs.

• I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect

  I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect

  If you are running Windows XP... There is a slight chance
  that by running the following command would be the fix:

  Reach... Start / run... and type or copy / paste the following text:

  regsvr32 %windir%\system32\qdv.dll

  Then... Press on... Come in...

  You should see a dialog box stating:

  DllRegisterServer in C:\WINDOWS\system32\qdv.dll successful

  Good luck...

  There is debate on this subject in the following forum:

  Windows Movie Makers Forums
  An unknown error has occurred

• When you try to install fix - it files, diagnostic and cleaning Center. I get a message that it is in the wrong format

  original title: format of the troubleshooting tool

  When you try to install fix - it files, diagnostic and cleaning Center. I get a message that it is in the wrong format. How can I fix it so I can clean or remove the unwanted [for example registry files]?

  Hi RandyHunter,

  1. what you trying to accomplish?

  2. What is the question you are facing on the computer?

  3. you try to install Microsoft fixit tool?

  4. did you of recent changes on the computer?

  If you try to install Microsoft fixit tool then I would suggest that you post your query in the Sub forum mentioned.

  http://social.Microsoft.com/forums/en-us/fixitcenter/threads

  Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.

• When you try to open an AVI file in Windows Media Player, the audio plays, but no picture.

  When you try to open an AVI file in Windows Media Player, the audio plays, but no picture. What is the problem and how can I solve this problem?

  Your computer can correct the code for AVI video. Download and install K-lite code pack can solve the problem. K-lite code Pack is free and safe, and it includes almost every video code and audio code.

• When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.

  When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.  Help, please.

  As I suggested previously, conversion to a format like
  . WMV before you import it into Movie maker may be the solution.

  The free Converter from Microsoft can be a place to start:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601
  (runs under WinXP SP3 / Vista / 7)

  When you install the program...
  Start Microsoft Expression Encoder 4
  (Start / programs / Microsoft Expression /)
  Microsoft Expression Encoder 4)

  On the "Load a new project" screen...
  Left click... "Transcoding project '...

  When the program opens, click on... File / import...

  (If at any time you get lost while browsing
  the program of... to... Window / active Reset
  Type or workspace... CTRL + SHIFT + R)

  Look for the file/s that you want to convert.
  (If files do not appear... open the fall
  window and choose... All files)

  Click (highlight) left the files and the left on the Open button.

  You can see the files in the "Multimedia content" pane

  In the right column... left click on the tab "Output"...

  Open the drop directory window and choose an output folder.
  (This is where you will find your converted file)

  On the left, click on the button "encode".

  Wait... video encoding CPU intensive and can
  be a slow process. It is always best if you do not have
  multi-task while files are encoded.

  Now... try import you again. File WMV in Movie Maker.

  More converters:

  There are to many converters available on the net...
  the following links are some examples. You can
  need to experiment to find the best result.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  'all' boxes on the last screen... even in this case, it may
  install the Ask toolbar on your system)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) hamster Free Video Converter
  http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
  (Windows XP, Vista, 7)
  (If you choose Custom Installation
  You can uncheck additional modules you
  do not want to install)

  (6) quick Media Converter
  http://www.Cocoonsoftware.com/
  (Win XP, Vista, Win 7 Home Premium)

  (7) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (8) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  Good luck...

• When I try to copy a single file (for example: size of 1 GB) drive hard to any what external memory device via the USB port, the copy process takes several hours to complete

  I use a DELL Studio 15 laptop computer. When I try to copy a single file (for example: size of 1 GB) hard drive to any external memory device (for example: USB key or external hard drive) via the port USB, the copy process takes several hours to complete. I have checked the viruses using McAfee Antivirus, but could not find. Can someone suggest me a solution?

  Hello

  ·          Were there any changes made to your computer before this problem?

  Step 1: Format the external device to the NTFS format and check if the problem persists.

  See: http://windows.microsoft.com/en-US/windows-vista/Convert-a-hard-disk-or-partition-to-NTFS-format

• Blue screen error when you try to print Adobe PDF files

  Original title: the computer crashes when I try to print Adobe PDF files.

  I unintalled and reinstalled remains 9.3.3 and it still won't print. The OS crashes when you try to print a .pdf file. I can open the document and view the file but not print, just the blue screen and restarts. I opened a word document, print and print text files. It will print anything but Adobe files. Is there any help out there?

  HonoriusIII

  Thank you for your support and help Sicard. I finally got to the last version of Adobe as the culprit. It seems that the latest version 9.3.3 was causing problems. I uninstalled the software, cleaned the registry and other remains and installed the various editions of Adobe. Seems that Vista likes only one software version which proved Adobe 8.0. Once I installed the software, found a few .pdf documents and tried to print. Not only did it print well, it was very fast. Of all the places to find the 8.0 Adobe has been installed on my recovery disks. I don't think Microsoft product (s) are the root cause. Something in Adobe was the cause of the crash. I have the error message has not write against accidents, but it dumped memory and restart is fine, no conflict of driver. Only thing I did after each accident was to defragment. the hard drive and RAM by using certain tools. Vista ran fine since. I know a lot of people out there do not like Vista, but I did have a lot of problems with the software. I found problems with other types of competing software and work with software developers using their products in beta. The crash of the problems were not these beta products. I believe in keeping software simple and effective, it seems that Adobe will conversely making it too complicated software and an application's entire concept.

  Thanks for you help,

  HonoriusIII

• Error when you try to open a .wmv file

  opening wmv files

  I think I have a problem with media center.  When I try to open a .wmv file sent to me, I get a msg of error saying that windows media player cannot play the file.  The player may not support the codec used to compress the file.  When zi check the files supported, the wmv is included in the list.

  Hi Ratller,

  ·         You are able to open the .wmv files in windows media center?

  Try to update codec on your computer.
  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Previous post: the results.

  Bindu S - Microsoft Support

  [If this post can help resolve your problem, please click the button 'Mark as answer' or 'Useful' above]
  This message. [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]