When you try to create the new thread in a discussion forum, the browser closes and I'm back in the office.

Similar Questions

• I don't have a blank page option when you try to create a new page

  I don't have a blank page option when you try to create a new page, what should I do?

  When questions about the user interface, it helps if you say that you are using which version of Dreamweaver. It sounds as if you are using the latest version of Dreamweaver CC, but try to follow instructions written for an older version. This is the new Document dialog box in Dreamweaver CC 2015:

  

  New Document has replaced the White Page in older versions. To get a blank page, select New Document in the left column, HTML as a Type of Document and there is no tab for framework.

• Satellite U205-S5034 - error when you try to create the recovery disks

  Hello world

  I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
  An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

  The machine is a Satellite U205-S5034 under XP Pro SP3.

  Any help will be greatly appreciated. Thank you and have a nice day.

  DaveMatt44

  Hello

  What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
  So please try other discs.

  Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

• I run pc photoshop CS6 on my windows 7 (mac). I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in my SP6 or 64 PS5.5

  Greetings

  
  

  I run Photoshop CS6 on my windows 7 Ultimate (MacPro 2008 via Bootcamp). 12 GB of ram, 512 on the video card. A lot of disk space. None of the questions of knowledge, viruses, malware, etc.
  

  
  

  I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in any of my SP6 or PS5.5 64-bit or 32-bit versions. «Cold is not complete the plug of command because Photoshop was unable to locate the plugin JavaScript» Re, I installed the latest update, but no change. My installation is built on CS4 extended, then with a version Standard 5, 5.5 and 6 facilities upgrade.

  
  

  The Contact Sheet function was working well, until I ran the updates.
  

  
  

  I'm in a bad place, as I am in the middle of multiple projects, everything I need to create Contacts for.  I thank any help or give advice on how to fix this...
  

  
  

  Help, please!

  Try to run Photoshop with the SHIFT key is pressed and skip loading part tird plug-in and try to use the Board contact II.  A version of plug-ins from third parties have been known to break Photoshop Scrippting.

• Error when you try to create the Contact form PSE13

  I get two error messages when you try to create a contact sheet

  "The operation could not be completed. The file or directory is not found. »

  then

  "Could not complete the command II Board contact because of a program error"

  I'm on iMac OSX Yosemite 10.10.2

  Updated for PSE12 when PSE13 is released

  No problems with PSE12

  If you go to

  (user) Library\Preferences\Adobe\Plugins\Adobe Board Contact II PSE12\Elements

  and remove the

  Adobe Board Contact PSE12 Pref.

  
  

  If all goes well, you should be able to use the plugin Contact Sheet II again.

  To view your library, the user in the menu go to the Finder press the Option key, then you should see library listed in the menu to reach.

• Getting the error "the device reported unexpected or invalid data for a command. (oxC0AA02FF) when you try to create the system repair disc

  original title: error 0xC0AA02FF

  I try to use a "USB" "cruzer" to create a disc repair system, but when I click on this drive to create it I get the following error message:

  "The device reported unexpected or invalid data for a command.  (oxC0AA02FF)

  Hello

  What method did you follow to create the system repair disc?

  I suggest you to create the system with different USB repair disc and check if it helps.

  Means all try the methods and check them off below if it helps.

  Method 1:

  Try to put the computer in a clean boot state, and then check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to perform check disk (chkdsk) on the computer and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: You may lose a small amount of data while performing the check disk.

  I also inform you that the data on the USB key will be lost. You should take a backup.

  You can also check with the reference article below:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

• Get the error code 0 x 80070643 when you try to install the Office 2003 security updates

  I tried to install updates for Office 2003 security for several weeks now. Updates are downloaded but continue to fail with the error code 0 x 80070643. Can someone help, please?

  Hello

  Were there any changes made to the computer before the show?

  Please follow the steps in the link.

  You receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services

  http://support.Microsoft.com/kb/903772

• Printer Offline Message When you try to print the Office Word doc

  Message from the printer offline.  HP shows printer status is online with wireless network and computer ASUS says is in line with wireless network and internet but when I try to print a word doc it does not print.  I get a message that the printer is offline.

  Hi Robin,

  Are you facing this printer offline error when you try to print from Microsoft Word?

  Error "the printer is offline" message on the computer and the printer does not print. Offline indicates that the computer has lost a direct communication with the printer.

  I suggest you try the steps from the following link and see if that helps.

  "The printer is offline" Message appears on the computer and the printer will not print: Windows 8
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c04249080

  I hope this helps. Let us know if you have other problems with Windows in the future.

• When you try to create the simple volume, I get "There is not enough available space on the disks to complete this operation." Even when there is obviously a lot of space.

  I just installed Windows 7 Professional in the last hour and was not able to create this partition during the installation.  Now that I'm in disk management.  It's showing I 73,24 GB of free space.  What I'm trying to do in the end, is to combine this with a partition already created.  One thing I find strange is anytime I go into "new simple volume" it tells me that the maximum space in MB is 74997 when the free space on the graph shows me only 73,24 GB.  I tried to create the size of the volume to 73000 MB and have also tried 10000MB and get to every time the same mistake!  "There is not enough available space on the disks to complete this operation."  What can I do to fix this?

  Your best bet is a third party partition manager.

  With the tools of Windows 7, you can only shrink and extend partitions, apart from the creation and deletion of them.

  Disk manufacturers quote their sizes of disc in decimal format. Windows Go are 2 ^ 10 or 1024 decimal MB. Then 74997/1024 is 73,24 GB.

• When you try to create the safety PIN or password photo, get the error "the remote procedure call failed."

  Logon to an account on the Win8 Pro system.  In the PC settings. Your account, try to create a PIN.  You will be asked your password, and when I enter the password, the tracking error.  "The remote procedure call failed."

  In the application event log, we see:

  The failing application name: CredentialUIBroker.exe, version: 6.2.9200.16384, time stamp: 0x5010a22d

  The failed module name: nvwgf2umx.dll, version: 9.18.13.1070, time stamp: 0x50b976f6

  Exception code: 0xc000041d

  Offset: 0 x 0000000000135122

  ID of the process failed: 0 x 1160

  Start time of application vulnerabilities: 0x01cddfd4b4a988ef

  The failing application path: C:\Windows\System32\CredentialUIBroker.exe

  Path of the failing module: C:\Windows\System32\nvwgf2umx.dll

  Report ID: fdf0d095-4bc7-11e2-be7a-e0cb4e8a55c5

  Faulting full name of the package:

  ID of the failed package-parent application:

  I did a search of exhaust gases and am not finding that anything related.

  Action taken:

  ran sfc/scannow and no reported problems.

  Need to stop the application to quit.

  I found the problem for the updated NVidia driver.  Once I disabled the display driver USB 3.0 that acts as a method to connect to a computer USB 3.0 (also tactile) monitor, the driver installed correctly and does not interfere with any of the Windows applications.
  Also, try to remove all the accounts on your system that are not user accounts that some applications will add them without apparent reason.  Applications still work correctly.  It's just less sure there to access your system.

• ORA-20001: PAY_7599_SYS_SUP_DT_OUTDATE when you try to create a new employee

  Hello.
  
  I hope someone can help. My script below takes the records to a temporary table and load it into ORACLE Financials via several API but on an initial test (using 1 NEW Record), it fails with the error message:
  
  Employee no.: 00020206
  ORACLE file processing error... ORA-20001: PAY_7599_SYS_SUP_DT_OUTDATE
  
  Ive tried google, the error message but nothing - can suggest someone either what this may be or shsow me another way to get a more specific reason for the problem?
  

  /* Formatted on 2009/04/29 11:52 (Formatter Plus v4.8.7) */
  SET serveroutput ON SIZE 1000000 FORMAT WRAPPED
  SET verify OFF
  SET feedback OFF
  
  DECLARE
  -- *********
  -- Debugging/error handling
  -- *********
  -- *********
  -- Work variables
  -- *********
  
     l_employ_start_date        DATE:= TO_DATE ('01-APR-1999', 'DD-MON-YYYY');
     v_ora_loc_code number                     := 0;
     p_emp_number                     VARCHAR2 (14);
     v_rec_cnt                        NUMBER                          := 0;
     insert_flag                      VARCHAR2 (8);
     err_num                          NUMBER;
     err_msg                          VARCHAR2 (150);
     err_line                         VARCHAR2 (350);
     err_seq                          NUMBER                          := 0;
     l_validate                       BOOLEAN                     DEFAULT FALSE;
     l_std_business_group_id          NUMBER                          := '0';
     l_default_code_comb_id           NUMBER                        := '218048';
     l_organization_id                NUMBER                          := '0';
     l_set_of_books_id                NUMBER                          := '1';
     l_job_id                         NUMBER                          := '10';
     l_obj                            NUMBER;
     l_datetrack_update_mode          VARCHAR2 (30)             := 'CORRECTION';
     l_assignment_sequence            NUMBER;
     l_name_combination_warning       BOOLEAN                         := FALSE;
     l_assign_payroll_warning         BOOLEAN                         := FALSE;
     l_org_now_no_manager_warning     BOOLEAN;
     l_other_manager_warning          BOOLEAN;
     l_spp_delete_warning             BOOLEAN;
     l_entries_changed_warning        VARCHAR2 (30);
     l_tax_district_changed_warning   BOOLEAN;
     l_person_id                      NUMBER;
     l_assignment_id                  NUMBER;
     l_assignment_id2           NUMBER;  -- := '28262';
     l_special_ceiling_step_id        NUMBER;
     l_per_effective_end_date         DATE:= TO_DATE ('11-Jul-2049', 'DD-MON-YYYY');
     l_people_group_id                NUMBER;
     l_group_name                     VARCHAR2 (30);
     l_assignment_number              VARCHAR2 (35);
     l_effective_end_date             DATE := TO_DATE ('11-Jul-2049', 'DD-MON-YYYY');
     l_date                           DATE                           := SYSDATE;
     ip_p_address_id                  per_addresses.address_id%TYPE;
     ip_p_object_version_number       NUMBER;
     ip_p_party_id                    per_addresses.party_id%TYPE;
     l_per_object_version_number      NUMBER;
     l_asg_object_version_number      NUMBER;
     l_full_name                      VARCHAR2 (240);
     l_per_comment_id                 NUMBER;
     l_per_effective_start_date       DATE;
     l_concatenated_segments          VARCHAR2 (240);
     l_soft_coding_keyflex_id         NUMBER;
     l_comment_id                     NUMBER;
     l_no_managers_warning            BOOLEAN;
  
  -- ***********************************
  -- Get employee details info from work table
  -- ***********************************
     CURSOR get_employee_details
     IS
        SELECT std_hire_date, std_last_name, std_sex, std_date_of_birth,
               std_email_address, std_emp_status,
               LPAD (std_employee_number, 8, '0') std_employee_number,
               std_first_name, std_marital_status, std_middle_names,
               std_nationality, std_title, std_national_identifier,
               std_address_line1, std_address_line2, std_address_line3,
               std_address_line4, std_post_code, std_telephone_1, std_country,
               std_region, std_location_id, std_organization_id,
               std_supervisor_id, std_person_id, std_position_id
          FROM SU_TEMPLOYEE_DETAILS;
  
  -- ***********************************
  -- Get EXISTING employee details info from ORACLE tables
  -- ***********************************
     CURSOR get_existing_employee_details
     IS
  
        SELECT per.person_id, per.business_group_id, per.last_name,
               per.start_date, per.date_of_birth, per.email_address,
               per.employee_number, per.first_name, per.marital_status,
               per.middle_names, per.nationality, per.national_identifier,
               per.sex, per.title, padd.address_id, padd.primary_flag,
               padd.address_line1, padd.address_line2, padd.address_line3,
               padd.town_or_city, padd.postal_code, padd.telephone_number_1, paas.assignment_id,
               paas.assignment_number, paas.object_version_number, paas.EFFECTIVE_START_DATE,
       paas.job_id, paas.position_id, paas.location_id, paas.organization_id, paas.assignment_type, paas.supervisor_id,
               paas.default_code_comb_id, paas.set_of_books_id, paas.period_of_service_id
        FROM   per_all_people_f per,
               per_all_assignments_f paas,
               per_addresses padd
         WHERE 
       per.person_id = padd.person_id
       --        AND paas.person_id(+) = per.person_id;
          AND paas.person_id(+) = per.person_id;
  
  
  
  -- *****************************************
  -- checks employee details info from PER_ALL_PEOPLE_F table
  -- *****************************************
     CURSOR c_check_employee (p_emp_number VARCHAR2)
     IS
        SELECT per.person_id, per.business_group_id, per.last_name,
               per.start_date, per.date_of_birth, per.email_address,
               per.employee_number, per.first_name, per.marital_status,
               per.middle_names, per.nationality, per.national_identifier,
               per.sex, per.title, padd.address_id, padd.primary_flag,
               padd.address_line1, padd.address_line2, padd.address_line3,
               padd.town_or_city, padd.postal_code, padd.telephone_number_1, paas.assignment_id,
               paas.assignment_number, paas.object_version_number, paas.EFFECTIVE_START_DATE,
       paas.job_id, paas.position_id, paas.location_id, paas.organization_id, paas.assignment_type, paas.supervisor_id,
               paas.default_code_comb_id, paas.set_of_books_id, paas.period_of_service_id
        FROM   per_all_people_f per,
               per_all_assignments_f paas,
               per_addresses padd
         WHERE per.employee_number = p_emp_number
           AND per.person_id = padd.person_id
           AND paas.person_id(+) = per.person_id;
  
     emp_rec                          c_check_employee%ROWTYPE;
  
  -- ***************************************************
  -- Cursor retrieves latest Object Version Number from per_assignments_f table..
  -- ***************************************************
     CURSOR csr_ovn (cp_person_id IN per_all_people_f.person_id%TYPE)
     IS
        SELECT MAX (paas.object_version_number)
          FROM per_assignments_f paas, per_all_people_f per
         WHERE paas.person_id = per.person_id
           AND per.employee_number = paas.assignment_number
           AND per.person_id = cp_person_id;
  
  
  -- ***************************************************
  -- Cursor to get Oracle_Loc_Code from SU CHRIS vs ORACLE Locations Table into a variable..
  -- ***************************************************
  
  CURSOR csr_ora_loc_code (cp_location_id IN SU_TEMPLOYEE_DETAILS.std_location_id%TYPE) 
   IS
        SELECT sil.ORACLE_LOC_CODE
       FROM SU_TEMPLOYEE_DETAILS std, SU_IEXP_LOCATIONS sil
       WHERE std.STD_LOCATION_ID = sil.CHRIS_LOC_code
       AND std.STD_LOCATION_ID = cp_location_id;
  
  
  BEGIN
  -- ***********************************
  -- Process each record in the work table
  -- ***********************************
     FOR v_emp IN get_employee_details
     LOOP
  -- ************************************
  -- determine whether customer already exists
  -- ************************************
        OPEN c_check_employee (v_emp.std_employee_number);
  
        FETCH c_check_employee
         INTO emp_rec;
  
         l_assignment_id2 := emp_rec.assignment_id;
  
        IF v_emp.std_emp_status = 'N' and c_check_employee%NOTFOUND 
        THEN
           insert_flag := 'I';
           DBMS_OUTPUT.PUT_LINE ('Employee No: ' || v_emp.std_employee_number);
  
        ELSIF v_emp.std_emp_status = 'C'
        THEN
  
         -- if c_check_employee%NOTFOUND then raise no_data_found;
          -- elsif l_assignment_id2 is null then
           
           if l_assignment_id2 is null then
            raise_application_error (-20010, 'Employee No: ' || v_emp.std_employee_number  || ' exists but has no assignment id!');
          end if;
  
             DBMS_OUTPUT.PUT_LINE ('Employee No: ' || v_emp.std_employee_number ||  '  already exists, making changes.. '   );
             insert_flag := 'C';
  
        -- RAISE_APPLICATION_ERROR (-20001,  'Employee No: ' || v_emp.std_employee_number  || '  already exists '    );
         END IF;
  
        CLOSE c_check_employee;
  
  -- ************************************
  -- Obtain the most recent Object Version Number..
  -- ************************************
        OPEN csr_ovn (v_emp.std_person_id);
  
        FETCH csr_ovn
         INTO l_obj;
  
        -- IF csr_ovn%NOTFOUND     THEN        RAISE NO_DATA_FOUND;   END IF;
        CLOSE csr_ovn;
  
  -- ************************************
  -- Open Oracle Location Code cursor 
  -- ************************************
  
  OPEN csr_ora_loc_code(v_emp.std_location_id);  
        FETCH csr_ora_loc_code
         INTO v_ora_loc_code;
        CLOSE csr_ora_loc_code;
  
  
  -- ***********************************
  -- Create new PER_ALL_PEOPLE_F and PER_ADDRESSES record from
  --            info in  table record
  -- ***********************************
        IF insert_flag = 'I'
  
        THEN
  --                      -- Importing Employee Procedure --
  
           Hr_Employee_Api.create_gb_employee
                   (p_validate                       => l_validate,
                    p_hire_date                      => l_employ_start_date,
                    p_business_group_id              => l_std_business_group_id,
                    p_date_of_birth                  => v_emp.std_date_of_birth,
                    p_email_address                  => v_emp.std_email_address,
                    p_first_name                     => v_emp.std_first_name,
                    p_middle_names                   => v_emp.std_middle_names,
                    p_last_name                      => v_emp.std_last_name,
                    p_sex                            => v_emp.std_sex,
                    p_ni_number                      => v_emp.std_national_identifier,
                    p_employee_number                => v_emp.std_employee_number,
                    p_person_id                      => l_person_id,
                    p_title                          => v_emp.std_title,
                    p_assignment_id                  => l_assignment_id,
                    p_per_object_version_number      => l_per_object_version_number,
                    p_asg_object_version_number      => l_asg_object_version_number,
                    p_per_effective_start_date       => l_per_effective_start_date,
                    p_per_effective_end_date         => l_per_effective_end_date,
                    p_full_name                      => l_full_name,
                    p_per_comment_id                 => l_per_comment_id,
                    p_assignment_sequence            => l_assignment_sequence,
                    p_assignment_number              => l_assignment_number,
                    p_name_combination_warning       => l_name_combination_warning,
                    p_assign_payroll_warning         => l_assign_payroll_warning
                   );
           Hr_Person_Address_Api.create_person_address
                                    (p_validate                     => l_validate,
                      --            p_effective_date               => v_emp.std_hire_date,
                                     p_effective_date              =>  l_employ_start_date,
                                     p_pradd_ovlapval_override      => NULL,
                                     p_validate_county              => NULL,
                                     p_person_id                    => l_person_id,
                                     p_primary_flag                 => 'Y',
                                     p_style                        => 'GB_GLB',
                                     p_date_from                    => SYSDATE,
                                     p_date_to                      => NULL,
                                     p_address_type                 => NULL,
                                     p_comments                     => NULL,
                                     p_address_line1                => v_emp.std_address_line1,
                                     p_address_line2                => v_emp.std_address_line2,
                                     p_address_line3                => v_emp.std_address_line3,
                                     p_town_or_city                 => v_emp.std_address_line4,
                                     p_region_1                     => NULL,
                                     p_region_2                     => NULL,
                                     p_region_3                     => NULL,
                                     p_postal_code                  => v_emp.std_post_code,
                                     p_country                      => v_emp.std_nationality,
                                     p_telephone_number_1           => NULL,
                                     p_telephone_number_2           => NULL,
                                     p_telephone_number_3           => NULL,
                                     p_party_id                     => ip_p_party_id,
                                     p_address_id                   => ip_p_address_id,
                                     p_object_version_number        => l_obj
                                    );
           Hr_Assignment_Api.update_emp_asg
                          (p_validate                    => l_validate,
                           p_effective_date              => SYSDATE,  -- l_date,
                           p_datetrack_update_mode       => l_datetrack_update_mode,
                           p_assignment_id               => l_assignment_id,
                           p_object_version_number       => l_obj,
                           p_supervisor_id               => v_emp.std_supervisor_id,
                           p_default_code_comb_id        => l_default_code_comb_id,
                           p_set_of_books_id             => l_set_of_books_id,
                           p_concatenated_segments       => l_concatenated_segments,
                           --IN/OUT
                           p_soft_coding_keyflex_id      => l_soft_coding_keyflex_id,
                           --IN/OUT
                           p_comment_id                  => l_comment_id,
                           --IN/OUT
                           p_effective_start_date        => l_date,     --IN/OUT
                           p_effective_end_date          => l_effective_end_date,
                           --IN/OUT
                           p_no_managers_warning         => l_no_managers_warning,
                           --IN/OUT
                           p_other_manager_warning       => l_other_manager_warning
                          --IN/OUT
                          );
           Hr_Assignment_Api.update_emp_asg_criteria
               (p_validate                          => l_validate,
                p_effective_date                    => SYSDATE,       -- l_date,
                p_datetrack_update_mode             => l_datetrack_update_mode,
                p_assignment_id                     => l_assignment_id,
                p_object_version_number             => l_obj,
                p_organization_id                   => l_organization_id,
                p_location_id                       => v_ora_loc_code,
                p_job_id                            => l_job_id,
                p_position_id                       => v_emp.std_position_id,
                p_special_ceiling_step_id           => l_special_ceiling_step_id,
                p_effective_start_date              => l_date,
                --per_effective_start_date,
                p_effective_end_date                => l_effective_end_date,
                --IN/OUT
                p_people_group_id                   => l_people_group_id,
                --IN/OUT
                p_group_name                        => l_group_name,    --IN/OUT
                p_org_now_no_manager_warning        => l_org_now_no_manager_warning,
                --IN/OUT
                p_other_manager_warning             => l_other_manager_warning,
                --IN/OUT
                p_spp_delete_warning                => l_spp_delete_warning,
                --IN/OUT
                p_entries_changed_warning           => l_entries_changed_warning,
                --IN/OUT
                p_tax_district_changed_warning      => l_tax_district_changed_warning
               --IN/OUT
               );
           v_rec_cnt := v_rec_cnt + 1;
           DBMS_OUTPUT.PUT (CHR (10));
           DBMS_OUTPUT.PUT_LINE (   'There were '
                                 || v_rec_cnt
                                 || '  records read in..'
                                );
  
  -- ***********************************
  -- Updating PER_ALL_PEOPLE_F and PER_ADDRESSES record from
  --            info in  table record
  -- ***********************************
  
     ELSE IF insert_flag = 'C'
        THEN
  
  -- ===================================================
  -- these next 6 lines is for the initial mass update of existing employee records only     
  -- ===================================================
  
  /*IF emp_rec.default_code_comb_id is NULL THEN
       l_default_code_comb_id = 218048;
       END IF;     
       IF emp_rec.job_id is NULL THEN
       l_job_id = 10;
       END IF;      */
  
  -- =========
  -- Section end
  -- =========
  
           Hr_Assignment_Api.update_emp_asg
                          (p_validate                    => l_validate,
                  p_effective_date              => emp_rec.EFFECTIVE_START_DATE,
                           p_datetrack_update_mode       => l_datetrack_update_mode,
                           p_assignment_id               => l_assignment_id2,
                           p_object_version_number       => l_obj,
  
                           p_supervisor_id               => v_emp.std_supervisor_id,
  
                           p_default_code_comb_id        => emp_rec.default_code_comb_id,
                           p_set_of_books_id             => emp_rec.set_of_books_id,
                           p_concatenated_segments       => l_concatenated_segments,
                           --IN/OUT
                           p_soft_coding_keyflex_id      => l_soft_coding_keyflex_id,
                           --IN/OUT
                           p_comment_id                  => l_comment_id,
                           --IN/OUT
                           p_effective_start_date        => l_date,     --IN/OUT
                           p_effective_end_date          => l_effective_end_date,
                           --IN/OUT
                           p_no_managers_warning         => l_no_managers_warning,
                           --IN/OUT
                           p_other_manager_warning       => l_other_manager_warning
                          --IN/OUT
                          );
           Hr_Assignment_Api.update_emp_asg_criteria
               (p_validate                          => l_validate,
                p_effective_date                    => emp_rec.EFFECTIVE_START_DATE,
                p_datetrack_update_mode             => l_datetrack_update_mode,
                p_assignment_id                     => l_assignment_id2,
                p_object_version_number             => l_obj,
                p_organization_id                   => emp_rec.organization_id,
  
                p_location_id                       => v_ora_loc_code,
  
                p_job_id                            => emp_rec.job_id,
                p_position_id                       => emp_rec.position_id,
                p_special_ceiling_step_id           => l_special_ceiling_step_id,
                p_effective_start_date              => emp_rec.EFFECTIVE_START_DATE,
                p_effective_end_date                => l_effective_end_date,
                --IN/OUT
                p_people_group_id                   => l_people_group_id,
                --IN/OUT
                p_group_name                        => l_group_name,    --IN/OUT
                p_org_now_no_manager_warning        => l_org_now_no_manager_warning,
                --IN/OUT
                p_other_manager_warning             => l_other_manager_warning,
                --IN/OUT
                p_spp_delete_warning                => l_spp_delete_warning,
                --IN/OUT
                p_entries_changed_warning           => l_entries_changed_warning,
                --IN/OUT
                p_tax_district_changed_warning      => l_tax_district_changed_warning
               --IN/OUT
               );
           v_rec_cnt := v_rec_cnt + 1;
           DBMS_OUTPUT.PUT (CHR (10));
           DBMS_OUTPUT.PUT_LINE (   'There were '
                                 || v_rec_cnt
                                 || '  records read in..'
                                );
  
           DBMS_OUTPUT.PUT (CHR (10));
  
  -- ******************************
  -- End of customer related details
  -- ******************************
        END IF;
  
        END IF;
  
     END   LOOP;
  
     COMMIT;
  
  EXCEPTION
  
     WHEN NO_DATA_FOUND 
      THEN
       ROLLBACK;
  
        err_num := TO_CHAR (SQLCODE);
        err_msg := SUBSTR (SQLERRM, 1, 150);
        err_line :=   'ORACLE error occurred processing record.. ' ||  err_msg;
        DBMS_OUTPUT.PUT_LINE (err_line);
  
        INSERT INTO SU_ERROR_LOG  VALUES (err_msg, 'TEMPLOYEE_DTLS.sql', SYSTIMESTAMP);
  
      WHEN OTHERS
     THEN
        ROLLBACK;
  
        err_num := TO_CHAR (SQLCODE);
        err_msg := SUBSTR (SQLERRM, 1, 150);
        err_line :=   'ORACLE error occurred processing record.. ' ||  err_msg;
        DBMS_OUTPUT.PUT_LINE (err_line);
  
        INSERT INTO SU_ERROR_LOG  VALUES (err_msg, 'TEMPLOYEE_DTLS.sql', SYSTIMESTAMP);
  
  END;
  /
  
  EXIT;

  Thank you very much
  
  Steven

  It seems that the employee supervisor is not active for the duration of the employee record.

  Recording using correct supervisor should solve the problem.

• Error 6 B 7 Windows has encountered an unknown error when you try to install the Office Live update 1.5 on the House system top of range of Vista SP2 64 bit with Office 2007 is installed.

  On a m950y of HP with AMD Phenom Quad Core processor 2.4 GHz, 8 GB of RAM, lots of available hard disk space, accepted the software license agreement. Can you tell me what's happening, if this should be fixed, and how it can be fixed?

  Mike-

  UH! After posting the added information in my last post, I have acted on an intuition, uninstalled, Office Live 1.5 from the Control Panel, rebooted, reinstalled and everything went well.

  So I guess there's a glitch somewhere where Windows Live Update thought I needed the upgrade while in fact I have not, and he is involved in a problem that cannot be resolved.

  Thank you for your help.

  Bill

• When I try to create a (new folder) the Briefcase icon appears instead

  When I try to create a (new folder) the Briefcase icon appears instead. What is going on? When I try to create a (new folder) in some files, it tells me that the choice is 'empty' what can I do to get the files works again?

  * original title - cannot create a "new folder."

  Hello

  ·         Did you make any changes before the show?

  I suggest that you create a new user account and check if the problem persists since the new user account:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem does not persist and then follow the link below to fix the corrupted account:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• When you try to create a system image, receive the error code 0 x 81000019

  Get the error code when you try to create a system image on a 900 + GB hard drive with 900 GB of free space. Keeps telling me that there is not enough space to create the image of the shadow. I'm trying the disk image has only 40 GB of data. What is going on? Using Windows 7 64 bit Pro.

  Many hours of searching the Web for answers about a year ago, said that relatively few people have this problem and proposed solutions in the forums have been complex, machine dependent and seem to fail for most of the people who have tried a fix...

  So when I gave up and called Microsoft... they told me to take my problem to anyone assembled my computer...

  The man who built my machine told me not to worry, simply store all my files on the cloud, as he does...

  So now I store my important stuff on a spare drive, we have installed in the box, go to live with the inability to make appropriate backups and restore points...

  All my old computers is standard backups without any hassle... Just this new machine with Win7.

  (The only "new" thing was a disc SSD C... can't believe it would make one difference either, other than speed... and many people use them in 2011...)

• When I try to create a new folder of file I get the error Code 0 x 80070570

  When I try to create a new folder of file I get the error Code 0 x 80070570

  Hello Denny,

  
  Thanks for the reply with the State of the question, sorry for the caused incontinence.
  I suggest you follow the suggestion of Babu V replied on 16 may 2013
  Reference:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-files/unable-to-create-a-new-folder-in-c-drive-get-the/75bbf947-094a-45E6-baf6-6b188f8d8ca0

  CHKDSK WARNING: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Please respond with the State of the question of assistance in
  Windows.