When you try to create the simple volume, I get "There is not enough available space on the disks to complete this operation." Even when there is obviously a lot of space.

Similar Questions

• When you try to access the windows Defender message this operation has been cancelled due to restrictions in effect on this computer

  Help

  Hi baulchy,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. you have any security software installed on the computer?

  Method 1

   

  Check and make sure that the Windows defender service is running on the computer.

  (a) click Start type services.msc in the Search box, and then click OK.

  (b) in the Services (Local) list, right-click Windows Defender, and then click Properties.

  (c) if the drop-down list Startup type is set to the value off, select Automatic from the drop-down list Startup type and then click OK.

  (d) click the file menu and then click exit.

  Method 2

  If the previous step fails then I would suggest that you scan and remove infections of malware or viruses on the use of the scanner online in the link below and check if it helps.

  The scan below only works on the 32-bit version of Windows

  http://OneCare.live.com/site/en-us/default.htm

  You can use the Microsoft security essentials to scan your computer

  http://www.Microsoft.com/security_essentials/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: There is not enough available space on the disks to complete this operation

  I bought this computer vista renovated a few years back and the hard drive has always partitioned off with nothing to my knowledge on this subject. I want to thank my C: drive now to actually get use out of vacant space, but after running through the procedure of online sites, I got me stuck.

  Now that the partition is marked as unallocated space, but it will not merge with the C: drive. The following error occurs.

  [IMG] http://i46.tinypic.com/ohpu0l.jpg [line]

  [IMG] http://i49.tinypic.com/3477frq.jpg [line]

  [IMG] http://i48.tinypic.com/2j2gviv.jpg [line]

  Any amount of mbs, I put in trying to extend the C: drive, it will not work. Help would be greatly appreciated.

  Many recommend expressly latest version of Acronis Disk Director.

  If you use something else, good chance to say bye bye to this installation of Windows.

  You can also use GParted (it's free), but it is perhaps too difficult to use, since you need to boot on it.

• Satellite U205-S5034 - error when you try to create the recovery disks

  Hello world

  I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
  An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

  The machine is a Satellite U205-S5034 under XP Pro SP3.

  Any help will be greatly appreciated. Thank you and have a nice day.

  DaveMatt44

  Hello

  What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
  So please try other discs.

  Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

• I run pc photoshop CS6 on my windows 7 (mac). I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in my SP6 or 64 PS5.5

  Greetings

  
  

  I run Photoshop CS6 on my windows 7 Ultimate (MacPro 2008 via Bootcamp). 12 GB of ram, 512 on the video card. A lot of disk space. None of the questions of knowledge, viruses, malware, etc.
  

  
  

  I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in any of my SP6 or PS5.5 64-bit or 32-bit versions. «Cold is not complete the plug of command because Photoshop was unable to locate the plugin JavaScript» Re, I installed the latest update, but no change. My installation is built on CS4 extended, then with a version Standard 5, 5.5 and 6 facilities upgrade.

  
  

  The Contact Sheet function was working well, until I ran the updates.
  

  
  

  I'm in a bad place, as I am in the middle of multiple projects, everything I need to create Contacts for.  I thank any help or give advice on how to fix this...
  

  
  

  Help, please!

  Try to run Photoshop with the SHIFT key is pressed and skip loading part tird plug-in and try to use the Board contact II.  A version of plug-ins from third parties have been known to break Photoshop Scrippting.

• Photoshop Elements 11, Windows 7 PC. When you try to make a Photo montage I get an error "not available for the creation of valid size.

  Hello

  Need help...  When you try to make a Photo montage I get an error "not available for the creation of valid size.

  Photoshop Elements 11, Windows 7 PC.

  Thank you

  Error "not available for the creation of valid size.

• error volume generic when you try to install the disk driver hard ext

  I have a toshiba satellite laptop computer with Vista Home Basic and a WD my passport essential 320 GB external hard drive

  Here's the question,

  I got the update of WD Web, its installation site and on my computer work... will not install the drivers.  I go to the Device Manager and the drive appears as unknown device.  try to update driver software, and then gets all throughout this so-called - "windows found driver software for your device but encountered an error trying to install", and then below that theres a picture of a hard drive and next it is written "generic volume". then below that it says "this operation requires and the interactive window station.

  went to disk management, any option that I click on reassign a drive letter or to reformat I get various error messages.  basically the wtf.  Ive google the issue and the error message and have tons of similar problems posted by other people, but nobody has the right solution for me - tried so much.  I called windows, they were no help, sent me here essentially.  not called WD they have no help...

  Anyone have any ideas?

  Thank you!

  Hello fighclubber25,

  a. don't you make changes to the computer before having this problem?

  b. are the other USB devices work properly on your computer?

  I suggest that you try the methods below to resolve this issue.

  Method 1:

  My research, I find that there are several problems with the Antivirus software when trying to install the drivers for the Western Digital hard drive. I suggest that you disable the antivirus software temporarily and verify if you are able to install the drivers. Also, make sure you download the correct version of the drivers.

  Note: Make sure that you enable the antivirus software after the test. You can check the link for more information below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2:

  Connect the drive to another computer and check if you are able to load the drivers. Just to make sure that the hard drive is not defective.

  You can also check out the link that will give you information on tips for solving problems with USB devices below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Getting the error "the device reported unexpected or invalid data for a command. (oxC0AA02FF) when you try to create the system repair disc

  original title: error 0xC0AA02FF

  I try to use a "USB" "cruzer" to create a disc repair system, but when I click on this drive to create it I get the following error message:

  "The device reported unexpected or invalid data for a command.  (oxC0AA02FF)

  Hello

  What method did you follow to create the system repair disc?

  I suggest you to create the system with different USB repair disc and check if it helps.

  Means all try the methods and check them off below if it helps.

  Method 1:

  Try to put the computer in a clean boot state, and then check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to perform check disk (chkdsk) on the computer and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: You may lose a small amount of data while performing the check disk.

  I also inform you that the data on the USB key will be lost. You should take a backup.

  You can also check with the reference article below:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

• Error when you try to create the Contact form PSE13

  I get two error messages when you try to create a contact sheet

  "The operation could not be completed. The file or directory is not found. »

  then

  "Could not complete the command II Board contact because of a program error"

  I'm on iMac OSX Yosemite 10.10.2

  Updated for PSE12 when PSE13 is released

  No problems with PSE12

  If you go to

  (user) Library\Preferences\Adobe\Plugins\Adobe Board Contact II PSE12\Elements

  and remove the

  Adobe Board Contact PSE12 Pref.

  
  

  If all goes well, you should be able to use the plugin Contact Sheet II again.

  To view your library, the user in the menu go to the Finder press the Option key, then you should see library listed in the menu to reach.

• When you try to create the new thread in a discussion forum, the browser closes and I'm back in the office.

  I tried to create a new thread in a Discussion forum.  Closing the browser window and I was back on the desktop.  I did a system restore, which not only does not solve the problem, but deleted my internet security software.  Has worked with people of tendency to reinstall the software, but I get a message tht says: «Unable to extract the installer...» ».  I have a class of the internet this week and I need this computer.  Can someone please?

  You can undo the last restoration of the system using: http://www.vistax64.com/tutorials/76256-system-restore-undo.html.  This may fix your problem with security software that has uninstalled when you did the system restore (using a date that probably existed before the installation of trend).  I don't know if it works now that you have done other things to try to reinstate the program, but it's worth a try.  I sincerely doubt that this process could help with the problem of browser (and there not so undo it reverses your efforts).

  You use Internet Explorer?  If so, please repost your question in Forum Internet Explorer: http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/threads where the IE specialists will be more than happy to help you with your problem.

  If you are using another brand of browser, please repost your question in the Forum program: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/threads where experts in programs other than Vista or IE will be more than happy to help you with your problem.  You can also try to go to the web site of the Explorer and contacting their technical support staff (or post on a forum if they support a).

  Only trend can help you with installation problems you encounter through their program.  Perhaps it didn't uninstall completely during the restoration of the system.  Check if the trend has a removal tool and use it to uninstall the program, then try to re - install again.  If this does not work, you will need to work with their technical support to solve the problem.

  I hope this helps.

  Good luck. Lorien - a - MCSE/MCSA/network + / A +.

• When you try to create the safety PIN or password photo, get the error "the remote procedure call failed."

  Logon to an account on the Win8 Pro system.  In the PC settings. Your account, try to create a PIN.  You will be asked your password, and when I enter the password, the tracking error.  "The remote procedure call failed."

  In the application event log, we see:

  The failing application name: CredentialUIBroker.exe, version: 6.2.9200.16384, time stamp: 0x5010a22d

  The failed module name: nvwgf2umx.dll, version: 9.18.13.1070, time stamp: 0x50b976f6

  Exception code: 0xc000041d

  Offset: 0 x 0000000000135122

  ID of the process failed: 0 x 1160

  Start time of application vulnerabilities: 0x01cddfd4b4a988ef

  The failing application path: C:\Windows\System32\CredentialUIBroker.exe

  Path of the failing module: C:\Windows\System32\nvwgf2umx.dll

  Report ID: fdf0d095-4bc7-11e2-be7a-e0cb4e8a55c5

  Faulting full name of the package:

  ID of the failed package-parent application:

  I did a search of exhaust gases and am not finding that anything related.

  Action taken:

  ran sfc/scannow and no reported problems.

  Need to stop the application to quit.

  I found the problem for the updated NVidia driver.  Once I disabled the display driver USB 3.0 that acts as a method to connect to a computer USB 3.0 (also tactile) monitor, the driver installed correctly and does not interfere with any of the Windows applications.
  Also, try to remove all the accounts on your system that are not user accounts that some applications will add them without apparent reason.  Applications still work correctly.  It's just less sure there to access your system.

• Script to create virtual machines fails when you try to add the disk to the cluster data store

  Hello

  Attached is the script that I used to create virtual machines and it works very well when virtual machines are created to warehouses of unique data, but do not have clustered data warehouses. I think that the reason is that it creates the virtual machine through the esx host (who does not know the cluter) and not via vCenter (who knows about it). Unfortunately I do not know how to fix.

  Thank you

  Astra

  Looks like he needs a store of data for this parameter object. So we need to do a get Datastore cluster I can try to test tomorrow, but try this:

  If ($datastore1 - only 'none') {}

  $drscluster = get-DatastoreCluster $datastore1

  $vmadddsk = new-disk-hard - VM $gstname CapacityKB - $datastore1size - data $drscluster store

  }

• When you try to create an ACCT. I get a 403 forbidden error code

  I'll put up my new 6510-e and when I try to create an account, I get a 403 forbidden error code.

  I can't get far enough to get the code for my printer.

  I discovered that you will not get the error if you use Firefox. Everything works as it should.

  Must be Internet Explorer causing the problem.

• When you try to create a system image, receive the error code 0 x 81000019

  Get the error code when you try to create a system image on a 900 + GB hard drive with 900 GB of free space. Keeps telling me that there is not enough space to create the image of the shadow. I'm trying the disk image has only 40 GB of data. What is going on? Using Windows 7 64 bit Pro.

  Many hours of searching the Web for answers about a year ago, said that relatively few people have this problem and proposed solutions in the forums have been complex, machine dependent and seem to fail for most of the people who have tried a fix...

  So when I gave up and called Microsoft... they told me to take my problem to anyone assembled my computer...

  The man who built my machine told me not to worry, simply store all my files on the cloud, as he does...

  So now I store my important stuff on a spare drive, we have installed in the box, go to live with the inability to make appropriate backups and restore points...

  All my old computers is standard backups without any hassle... Just this new machine with Win7.

  (The only "new" thing was a disc SSD C... can't believe it would make one difference either, other than speed... and many people use them in 2011...)

• Version of Photoshop elements Windows 14 - error when you try to create a Photomerge Panorama "documents must be registered before they can be merged. I tried a few of the fixes mentioned in these forums such as Edit-> Preferences-> general-> res

  We know the fix for the bug "documents must be registered before they can be merged" when you try to create a Photomerge Panorama in PSE 14?

  I think I have found workarounds to the question "documents must be registered before they can be merged" (no thank you lack of Adobe customer support):

  Solution #1

  My workflow template is to take pictures with my SLR and save on the memory in the form of RAW files, download the images on my PC, then open the RAW files in Adobe Camera Raw and then save the images to jpeg using PSE. I wasn't able to create Photomerge Panorama with jpeg images I've saved, but I was able to create Photomerge Panorama with the images I have saved IF I save as TIFF 8-bit files in EPS. A condition for this workaround was that I had to save the pictures at their original resolution and not at a reduced resolution.

  Solution #2

  If I have a right-click on an image and selected open with 14 and observed PES Editor (RGB/8) * to the right of the file changes its name, which means PSE think he has not saved to the file. The solution is to go to file-> Save-> Save (replace existing file-Yes)-> OK. You can then use this file and others you perform the same steps to create a Photomerge Panorama.

  Solution #3

  The way to save JPEG files in PSE is to go to file-> save for Web-> Save-> Save. The workaround is to select the file-> save for the Web and then check the box include the color profile , then click on save and then save again. Then I'm able to merge JPEG files using Photomerge Panorama and I don't get the error message "Documents must be registered before they can be merged". I looked back 11 of PSE that is still on my PC and found that the Embed checkbox color profile did NOT have to be checked to get Photomerge to work for jpeg files. So it appears with PSE 14 Adobe changed the Photomerge Panorama script to require the image file the color profile embedded in the image. If the color profile is not embedded, PSE think the image file has unsaved changes. BTW, this bug, or "feature" has not changed with PSE 14.1.