When you try to download Silverlight, I get a message that says that Windows Installer are not available.
Windows Installer is not correctly installed
When you try to download Silverlight, I get a message that says that Windows Installer are not available. Windows install is not properly installed.
How can I fix it?
I am running XP Home Edition.
Thank you
Hello
1. you try to directly run the silverlight program without saving it on the computer?
Run the following article fixit tool and check.
Diagnose and solve the program installation and uninstallation problems automatically
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
Tags: Windows
Similar Questions
-
Original title:
Windows Installer.
When I try to install anything I get the following message: "service Windows Installer could not be accessed. Windows can run in safe mode or Windows install not installed correctly. I'm not running in safe mode. This problem started in the last day or two and there have not been any changes to my computer. I'm under Winsows XP Professional, 32-bit, service pack 3. Could you help me solve this problem? Thank you.
HelloYou can try the steps from the following link and check if it works:""The Windows Installer Service could not be accessed "error message when you install a program in Windows XP "Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in WindowsLet us know if it helps! -
Get a message that Windows Installer does not work correctly.
Original title: Windows Installer problem
I get a message that my Windows Installer is not workiing correctly. What should I do?
Thanks to all who tried to help. I finally finished on the pone to a tech assistant who could still find a solution. End of the story: crossed the system recovery and I am now busy do everything to come back as much as I can. Thanks again for your efforts.
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:I tried to change the administrator. I tried to change the ubc, but continue to play with good tips.
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
· You download by using internet explore?
· The user account is defined as an administrator?
Step 1: Disable any antivirus or antispyware program that may be run and check if you are able to download.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
WARNING: This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this solution to workaround but are providing this information so that you can implement this workaround at your own discretion solution. Use this workaround at your own risk.
Step 2: If you use Internet Explorer, then optimize Internet Explorer.
http://support.Microsoft.com/kb/936213
Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Please help me to install adobe photoshop 14. I get the above message.
You will have the option to skip. Just ignore it and continue with the installation.
Kind regards
Hervé Khare
-
Problem Windows install
When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.
I looked at several forums and tried cleaning patches, etc they suggest. I also tried to download Windows Installer 4.5 but keep says "the update does not apply to my system" (I tried all.)
I am running Windows Vista and have downloaded the service pack 2 (one remedy suggestions!) Someone out there has a solution?
Hello, Atwitsend...,
Try to repair.
Go into Add Remove Programs, then select Apple Software Update > change > repair.If this does not work, try to uninstall. .
Remove and reinstall ITunes, Quicktime, and other software components
http://support.Apple.com/kb/HT1923Download the iTunes Installer and save it on your desktop.
http://www.Apple.com/iTunes/download/
Try to install iTunes using the installer that you saved.
-
When you try to import photos I get an error that says: Preview is not available for this file. Then when I try to download these files, a gray box returns for each photo with the name of the file, and this error message -Preview is not available for this file but no picture. The files are JPEG files. I use Lightroom CC help?
Some additional information. I received these photos of my granddaughter of my son with Dropbox. I checked the files under properties and found that they were listed as "some blocked properties" so I checked the box to 'unlock' and click on apply. The blocked message went away. Then, I took the original photos out of the folder of file they were in. I went back to LR and made sure those grey boxes with the Preview is not available for this file was missing. Then I went to the new files with the status of unlock in a new folder and tried to import into LR... same thing happens again! UGH
Hi rsobieski,
Could you please copy the images of Dropbox in a new folder on the computer/pictures folder.
Also, then try again to import images into Lightroom and also please check if you have read and write permissions on the images.
Kind regards
Tanuj
-
Issue of Windows install
I just bought a HP Photosmart printer and I am trying to install the software on my computer. (OS is Windows Vista.) When I try to install my software, I get an error message that "Windows Installer could not be accessed". I ran "msconfig" and found that the Modual from Windows Installer status is stopped. How should I proceed?
Thank you, Jeanne Vecere
You could try to go to the MICROSOFT website, go to KNOWLAGE database and in the search bar, try the search for WINDOWS INSTALLER. Look for any version that is newer than the one you have. If this fails, try searching on GOOGLE. You can also try to do an update to WINDOWS VISTA.
IF YOU ARE RUNNING 64-BIT WINDOWS, MAKE SURE YOU PRINTER WORKS WITH 64-BIT.
-
Microsoft support see my installed OS windows XP. When, in fact, I have Vista for businesses. So that when I click on an article I get a message that the article does not apply to me and that I should see windows xp support
If you don't mind, double check what Windows do you really.
If you do not have Vista... Start > computer > toolbar, System Properties > what does say under Windows edition?
t-4-2
-
I want to install lightroom 6. I have Windows 7, but I get a message that Windows Vista is not allowed.
Hello
You can check out the link below.
Hope this will help you.
Kind regards
Hervé Khare
-
- Hi, I searched high and low for the answers! I searched all over the internet
ten hours! - I'm having a problem with my windows install!
- Everytime I try to download or install anything a message appears saying that my installer was not installed correctly?
- I had my computer for 5 years and have not had a problem like this happen!
- I tried the start menu then pressed the guest who took me to the black screen, I then typed in the cod for the Msi and I then pressed on enter and nothing came?
- But I know that there is something wrong with my installer because when I try to download or install something that to happen (but, when I press the run button, nothing happens?) I do not know???
- Can someone please! I have Windows Vista Home Premium 32 bit! Thank you
original title: Hi, I searched high and low for the answers! I searched all over the internet!- Hi, I searched high and low for the answers! I searched all over the internet
ten hours! - I'm having a problem with my windows install!
- Everytime I try to download or install anything a message appears saying that my installer was not installed correctly?
- I had my computer for 5 years and have not had a problem like this happen!
- I tried the start menu then pressed the guest who took me to the black screen, I then typed in the cod for the Msi and I then pressed on enter and nothing came?
- But I know that there is something wrong with my installer because when I try to download or install something that to happen (but, when I press the run button, nothing happens?) I do not know???
- Can someone please! I have Windows Vista Home Premium 32 bit! Thank you
See this last answer of this forum:
Note: ignore the itunes, the iphone part.
The response is universal. - Hi, I searched high and low for the answers! I searched all over the internet
-
My son bought this laptop Toshiba Satellite with windows 7 ultimate and gave our grandchildren for Christmas two years ago. They never used so it brought and I got from my son. On startup, I get a message that windows is not genuine. I've repeatedly tried to activate with the product key on the label of MS on the back of the computer laptop, but message still there. I noticed the first time I tried to enter the product key, there was a different product key in the input fields. I have entered the correct product key but message still there.Can someone please help? Thank you for your time.
Hello
I would say allowing you to run the Microsoft Genuine Diagnostics tool then copy and paste the results into an answer here for further analysis:
http://go.Microsoft.com/fwlink/?LinkId=52012
Also I suggest you to check your product key and report to Microsoft about the issue.
Check out the following link to report to Microsoft.
-
When you try to start Firefox, even once, I got a message saying "close Firefox. A copy of Firefox is already open. Only one copy of Firefox can be open at a time. "This issue is addressed in Mozillazine but nothing I've tried there seems to work. I started a new profile in the profile manager that gets at least upwards and the functioning, but strangely enough the Manager also told me the old (default) profile is still underway, although I can't find a way to close it. Also, I can't find the default profile in my Profile Manager. can anyone help?
This has happened
Just once or twice
== I thought that I had left Firefox and he was new.
I get the same problem from time to time. It is not a solution but I go into Task Manager (select by right clicking on an empty area of the start bar) and under the research process and, invariably, there is a 'hidden' version to use the FF. I selects & close via Task Manager and then am able to restart FF.
-
Please help with 9.3 update. I get the message that the update cannot check because we are is more connected to the Internet. Restart does not help.
Apple released the update iOS 9.3 for older devices (air of iPad and previous iPhone, 5 s and previous) due to problems with Activation. See the following for details and possible solutions.
http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad
https://support.Apple.com/en-us/HT206203
A new version for the iPad 2 is now available which does not require the activation step. A new version for other devices is not yet available. You will have to wait for that Apple releases a new version for Air. If your works well at the moment you are one of the lucky ones.
-
I'm unable to download programs and receive a message that says that the program contained a virsus and was eliminated.
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Try to run the online scan and check if it helps:
http://www.Microsoft.com/security/PC-Security/Malware-removal.aspxMethod 2:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.
It will be useful.
Maybe you are looking for
-
Import/Export of identities
Is it possible to export and import multiple identities?
-
Tecra A8-185: no sound with Vista
I think someones have the same problems as me - under Vista, there is no noise even if the drivers updated. In the audio mixer window, showed that everything was working, but there is always silence :( Someone knows how to deal? :(
-
Cannot connect to the network after updating to iOS 9.3 Beta
I downloaded and installed the public beta version of iOS 9.3 on my iPhone 6 today. After that, I am unable to connect to the network. I tried to reset the network connection of the phone and have my cell phone operator reset the network connection.
-
How does a facility TestStand to parse a string to a TcpIp Read?
L & G, I am interested by linking TestStand for a product of mine and I downloaded the eval and spin a typically TcpIp sequence as shown in the examples. I'm trying to understand how to configure TestStand to parse the string coming back from my ser
-
The HP Envy 700-327C there a second CD player?
HP Envy 700-327C has a second CD drive or is this a slot to install a? It shows a picture of a screwdriver; This could mean one is necessary to unlock the drive or is necessary to install a drive?