When you try to format CD - RW, receive error message 'windows could not complete the format' Vista SP2

Similar Questions

• While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  Here's the situation.

  First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.

  Here are the solutions I tried, in and out of safe mode:

  While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.

  It Startin via msconfig did not work.

  Tried to go through Device Manager, which is completely empty for some reason any.

  System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.

  I knew, but there may be malware, mutiple scans with several services did not find anything.

  I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you:

  • You are running Windows 7 or Windows 10 on your PC?
  • When was the last time it was working fine? Remember to make changes to the computer before this problem?

  Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:

  1. Open the start menu and type "cmd".
  2. Right-click on the command prompt and click "run as administrator".
  3. Type the following commands and press ENTER after each.

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  After you run these commands, restart the system and check.

  You can also view,

  Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness

  https://support.Microsoft.com/en-us/KB/947821

  If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.

  Refer,

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Hope this information was useful.

• try to start the bonjour service, but get the error message: windows could not start the Bonjour service on local computer

  error message
  Windows could not start the Bonjour service on local computer
  Error 5 access is denied

  I have Vista Home.

  This prevents me to update I have tunes.

  Completely uninstall iTunes. Download the update manually from Apple or here. Restart the system and then install the software you have downloaded.

• When you try to open a PDF file, it says "Acrobat could not load the DLL base."

  I do not have any Antivirus and when I want to open a PDF it always says "Acrobat could not load the DLL base."

  Hello Kushagra_Saxena,

  To address your error message:
  You can repair Adobe Reader in Control Panel:
  In Windows, choose Start > Control Panel, and then double-click programs and features.
  Click on adobe Reader.
  Click on modify and follow the instructions to repair the application.

  Since you don't have an Antivirus, you can download Microsoft Security Essentials for free.
  It offers offers protection in real time for malware, spyware and other virus infections. It runs
  quietly and efficiently in the background.
  You can download at the following Web site: http://www.microsoft.com/en-us/security_essentials/default.aspx

  I hope this helps.

  Marilyn

• I have Photoshop CS6 extended. When I create a new layer, I get the following message. Could not complete the command because the selected area is empty. What I am doing wrong?

  I have Photoshop CS6 Extended. When I create a new layer, I get the following message. Could not complete the command because the selected area is empty.

  What I am doing wrong?

  Thanks for any help

  Bob.

  How do you create the new layer? Looks like you have a selection and use ctrl/cmd-J. If you have a choice and it is empty, you will get this error.

• Error: "Windows could not complete the format" when you try to write to blank DVDs

  I get this error when you try to copy files to a blank DVD.  I am trying to drag and drop files into the dvd player and after a small roar, the dvd ram drive stops and the error message.  Then the drive no longer recognizes blank dvd inside.  I am running Vista 32 bit and my dvd ram is a matshita dvd - ram uj880as ata.  I tried to switch to the microsoft 'FixIt' site, but the problem is not resolved.  I think that the report mentioned that the reader could recognize not writable or something to that extent.  The player can play DVDs fine, however.  Is there a solution to this problem by replacing the dvd ram drive?

  Hello

  Have you tried to close all programs and then insert the disc to see what is happening? Try a slower
  speed or mastered format. Have you added any burning new software lately - these tend to compete
  for resources and can interfere with each other.

  Should which CD or DVD format I use?
  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  ====================================

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD have a tolerance + - and you can write on the outside edge.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this troubleshooting:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• receive error message when you try to view a ProfilePage on error messages

  Hi all

  I get an error message when you try to view the errors on a profile page.

  On the page I see this:

  org.apache.jasper.JasperException: java.lang.IllegalStateException: getOutputStream() has already been called for this answer

  org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:515)

  org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:405)

  Finally, I see this:

  18:23, ERROR 206 [[jsp]] Servlet.service () for servlet jsp threw exception

  java.lang.IllegalStateException: getOutputStream() has already been called for this answer

  at org.apache.catalina.connector.Response.getWriter(Response.java:621)

  at org.apache.catalina.connector.ResponseFacade.getWriter(ResponseFacade.java:198)

  Please let me know what could be the reason.

  Thank you

  Vishnu

  Hello

  You can check that your page is locked in a dsp:page tag. If this isn't the case, add the tag and see if that helps.

• Receive error messages: E:\ IS NOT ACCESSIBLE THE DISK STRUCTURE IS DAMAGED AND ILLISIBLE and unable to run CHKDSK at startup

  Original title: corrupt master file table pleae help

  Hi all I have a problem I hope that someone can help me with
  first of all, I have a toshiba satellite laptop computer running windows vista.i have 2 drives c: and e:
  c being the main one with windows and e being the backup and where I put a lot of my files, movies, etc.
  IV had no problems atall and then I went to the E drive access yesterday and first had it that no info under the drive icon does say just LOCAL DRIVE E:
  When I click on it I get this message E:\ IS NOT ACCESSIBLE THE DISK STRUCTURE IS CORRUPTED AND UNREADABLE
  I tried to run chkdsk at startup and cmd prompt and I get this message "corrupted master file table.
  cannot recover master file table chkdsk abandoned... " Device Manager sees no problem. Event Viewer, says "the file system on the disk structure is corrupted and unusable. Please run the chkdsk on the E: volume utility. »

  I have a lot of files on the drive I want to lose.can someone give me advice on how to solve this problem, I hope iv gives you all the info you need. Thanks in advance

  Hi helzf,

  You can try to run a Checkdisk on drive E to fix disk errors that can cause this problem. You can make a backup of the data on this drive and try to run checkdisk.

  Check out the link:

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  Hope this information is useful.

• So that the supply of machinery of vCenter.  Fails on the customization of operating system prompted with the error "windows could not complete the system configuration to try to resume the computer restart configuration.

  Sysprep from Windows fails with the error while the supply of machinery of vCenter. "windows can not finish the system configuration to try to resume the computer restart configuration.

  I use vmware vcenter spec customization here,

  I'd say it's because of incorrect permissions or corrupted registry entry or registry that exceeds 8 KB.

  Please visit https://social.technet.microsoft.com/Forums/windows/en-US/658528ce-6eb5-403b-ae41-458147c2c044/sysprep-failling-after-reboot-into-oobe

  Also change to vmxnet3 NIC and install vmware tools and try cloning.

  "

  ) More than 8 k

  (b) set incorrect permissions

  (c) corrupted somehow

  For me, the problem was intermittent (same registry key would sometimes cause the issue and sometimes not - must be corrupted sometimes) so it was impossible to tell what program it was.  Fortunately, there is a newspaper, you can watch that will tell you exactly what registry key is slightest mistake out.  Here are the steps to get the newspaper, you must see:

  When you see the error message, follow these steps:

  1.) press SHIFT + F10 to get to a command prompt

  2.) stand C:\windows\Panther

  3.) find the Setup.etl file and find a way to copy this file out of the system (I copied it to the partition D:\ and Ghost used to collect this partition and down the file)

  4.) copy the file to another computer that has Windows 7 setup.etl corrupt system.  Place it at the root of C:\ for easier access.

  5.) open a prompt on the Windows 7 computer.

  6.) navigate to the root of C:\ (or anywhere where you saved the file)

  7.) type "tracerpt setup.etl o logfile.csv.

  8.) close command prompt and open logfile.csv in your text editor of choice.

  9.), look in the log file (near the end, probably) for messages that say "Failed to key"reg"process or one of its descendants" to me, the exact eror looked like this: "failed to process the"reg"key or one of its descendants: [profile \REGISTRY\MACHINE\SOFTWARE\ESET\ESET Security\CurrentVersion\Plugins\01000200\Profiles\@My] ' If you search for"«key reg"' or «failed in the process»»» You should find the failure.

  10.) remove this software from your image, or how to get the registry key that does not work properly.

  After that, you should be able to correctly identify any key problem and the elimination/workaround on your image.

  "

• When you try to install a game, an error message appears saying corrupt source files

  I am trying to install a game on my Asus laptop and while it is installing an error message and it won't let me install the game. What should I do

  Hello

  1. What is the exact error you get when the installation fails?

  2. What is the video game you are trying to install?

  3. are you able to install any other game?

  4. are you download the game on the Internet or you have the disc for the game?

  5. what version of windows is installed?

  You can try the steps.

  I copy the contents of the disc to a folder on the computer and try to install the game folder. Check and verify the results.

  II Try to set up your computer in a clean boot state, and check if the same issue occurs

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem. 

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  I hope this helps.

• When you try to download, I get an error message saying 'a problem caused Firefox to close' and dl fails.

  I am running windows 8 and have Avast! for antivirus. I'm running FF ver26 and is up to date. This problem just started about 2 weeks ago.

  Hi doughnuts49er, have you noticed any pattern as to the type or source of the download?

  I noticed in your list of extensions that you have Advanced SystemCare. Since the recent update, users have reported a variety of issues. Could you try disabling this extension and partner, AccelerateTab?

  Open the page modules using either:

  • CTRL + SHIFT + a
  • Firefox orange (or the Tools menu) button > Add ons

  In the left column, click Extensions. Then find and disable:

  • AccelerateTab 1.4.1
  • Advanced SystemCare surf Protection 1.0

  If everything is not essential, unrecognized or suspicious, don't hesitate to disable those as well.

  If a link appears on one of the disabled extensions to restart Firefox, you can complete your work on the tab and click the links in the last step.

  Who can help.

• When I try to open Firefox I get a message: "update could not be installed. Make sure that there is not another instance of Firefox. Restart and try again. »

  Something.on 29 started w/FF SP3 Win XP (Home)

  W/taskmanager verified and PS there is no other instance of FF.
  Only happens in my profile, administrator and other users do not receive this message.

  First reset, did not work.
  Safe mode also did not work.
  Uninstalled completely, even deleted my profile Firefox folder and restarted.
  New versions of downloaded, installed and same problem.

  Firefox now version 33, everything seems to update but I still get this message. When I open help > about he says: I'm the 33 version and restart to upgrade...

  Any ideas greatly appreciated.

  Back to SeaMonkey yet.

  Much thanks ideato.

  There was no possibility of not installing the update (in custom installation) as in the installation from the heel, but I went ahead anyway.
  This seems to have done the trick.
  No error messages in my my profile and FF made a successful update (see screenshot).

  Thanks again
  See you soon

• Try to install Windows 7 from XP, receive the error message "Windows could not retrieve information about the disks on this computer.

  Try installing Windows 7 from XP and keep having this error message before choosing my instalation method, Windows not able to retrieve information about the disks on this computer.

  Because the migration from Windows XP to Windows 7 requires a clean install anyway, might as well you are backing up your important files and settings using Windows Easy Transfer and do a custom clean install by booting from the Windows 7 DVD.

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

• Windows could not complete the format (external hard drive)

  I use windows 7 64 bit and my external hard drive crashed and has converted his car to RAW format rather than NTFS

  I tried to solve the problem by changing the name of 'L' discs to other letters and retry the format without success

  I also tried to use the disk management format and changed to an optimal device

  And also I tried using diskpart.exe

  This has not just to reformat the drive, so I can use it I do not have the information about this because it's still all on my computer any suggestions would be greatly appreciated

  Hello
   
  
  could a. you give us the exact error message and the error code, if any?
  b. what commands did you tried the diskpart utility?
  c. I recommend to do the full format rather than the quick and check.
  d. also try to format the drive on another computer and check.
  
  I recommend you to use the clean command to remove and format all partitions on the external hard drive and check. See the article below for more information.
  A Description of the Diskpart command-line utility
  (This article is valid for Windows 7 too.)
  http://support.Microsoft.com/kb/300415
  Note: Run the clean command, you delete the content and the partitions on the external hard drive.
   
  For more information, refer to the article below.
  Formatting disks and drives: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to share the printer attached to the XP with windows 7, receive error message: windows cannot connect to the printer: operation failed with error 0x000004f1.

  Original title: printer HP LaserJet 4050 of PCL6 compatible with Windows 7?

  I have a desktop windows xp pro (SP3 5.1.2600) and you have a printer HP LaserJet 4050 PCL6.  The printer works fine connected to the desktop computer with a parallel port.  I'm trying to share the printer on my home network so that Win 7 (6.1.7601 SP1) laptops can use its printing features.  Please help.

  First I tried to add it with \\hostname\printername that returned this error: windows cannot connect to the printer: operation failed with error 0x000004f1.
  I downloaded and installed the Win7 drivers on the HP site on my laptop Win7, that has not changed a thing: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=18318&prodTypeId=18972&prodSeriesId=25475&swLang=8&taskId=135&swEnvOID=4063
  Thanks in advance for any help / support!

  Hello

   

  1. the two Windows XP, Windows 7 connected in a same workgroup?

  2. can you access files shared XP of Windows 7 computer?

  3. check if the printer is shared or not?

  I suggest you follow these methods and check.

  HP LaserJet 4050 PCL6 printer is not compatible with Windows 7. Printer drivers are available for Windows XP-based computers only.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25475&prodNameId=18322&swEnvOID=228&swLang=8&mode=2&swItem=LJ-4119-3

  It is not in the Windows 7 Compatibility Center.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=4050%20PCL6

  I sugegst you contact HP support for Windows 7 drivers, after you instaall drivers to check with the question.

  http://WWW8.HP.com/us/en/support-drivers.html

  See also: networking computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows#section_7

  I hope this helps!