When you try to install the updates get - error message 80070490

Similar Questions

• In XP, when you try to install the printer, get error "the specified port is unknown."

  See the title of the question.

  * original title - when I try to install the printer, I get the message "the specified port is unknown. This happened after cable tv and cable modem has been installed

  Thanks for your help. I am not a comp read and write to do all this.  here goes

  No printer listed. I deleted all.no ports usbxxx or dot4xxx. several others listed.

  Middle neck is the same. Intel

  the RT is Windows 2000 or xp.

  It's what I expected.

  Usbprint.sys figure 54 times more often in documents and settings. also in nt service pack driver PK. Ditto for usbmon.dll.

  This is not the case.

  1. open Windows Explorer and type C:\Windows\system32 into the address bar.
  2. find usbmon.dll
  3. right click on this file. Select properties, and then click the Version tab. Is - this version 5.1.2600.5512?  If not, is what version?
  4. now, go to the C:\Windows\system32\drivers folder
  5. what version is the usbprint.sys file?

  You have a copy of each file in C:\Windows\ServicePackFiles\i386?  If so, what are the versions of these files?

  If the usbprint.sys and usbmon.dll in C:\Windows\ServicePackFiles\i386 files are identical (or older) versions that the corresponding files in C:\Windows\system32 and C:\Windows\system32\drivers, copy the C:\Windows\ServicePackFiles\i386 files into their appropriate folders.  Then restart.

• Get 800b0100 error when you try to install the update KB905866 (Mail filter spam for x 64 systems) in Vista

  Get 800b0100 error when you try to install the update KB905866 (Mail filter spam for x 64 systems). It keeps failing even though I followed the steps all the recommended (in aid) and installed some other stuff.  Tried several times but nothing helped.  I saw a recommendation to install a Wups2.dll file but do not know if I should do it because the recommendation is for Windows XP and I have Vista Home.

  Hello

  I suggest check the link below and try do a SFC (System File Checker) scan and check if it helps.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I would also say that you reset Windows update components and check if this may help.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• code Ox643 error when you try to install the update of security for flash player (KB923789)

  I get the error code Ox643 when you try to install the update for flash player (KB923789) security - after Mr fixit running and the application of other measures recommended, I still have the error code and get the installation error code. What should I do now?

  Is Adobe Flash Player v11.3.300.257 (or higher) installed? Test here using Internet Explorer (only!)-online http://www.adobe.com/products/flash/about/

• Error 80071 has 30 when you try to install the updates.

  What does it mean error code a 80071, 30 when you try to install the updates

  Hello

  1. are you able to install the updates as soon as possible?

  2 has there been recent changes made on the computer before the show?

  I suggest you to please follow the provided steps and update us with the results.

   

  Method 1: Perform the clean boot and try to install the updates.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

   

  Method 2: Run (CheckSur.exe) system update readiness tool

  Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the CheckSur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/947821

  (947821) description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Try to install updates again.

  Method 3: How to reset Windows Update components?

  http://support.Microsoft.com/kb/971058

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows.

  Method 4: Scan of the file system (CFS) auditor.

  Perform a scan of the checker (SFC) system files on your computer. SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  See the following article for more information on using SFC tool to troubleshoot missing or corrupted system files:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  You can also check the updates failed.

  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.

  (b) in the left pane, click view update history.

  I hope that helps!

• When you try to install the update to upgrade windows 7 pro for windows ' 0 pro update windows seems even after 5-10 min in a loop with no sign of progress.

  * Original Title: windows update

  When you try to install the update to upgrade windows 7 pro for windows ' 0 pro update windows seems even after 5-10 min in a loop with no sign of progress.

  If anyone has any ideas on how it can be fixed please tell me

  Adam

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide the exact details of any problem it reports as not fixed.

• Received error code: U44M1I216 when you try to install the updates

  When you try to install the updates for my adobe products, I received the following message is displayed:

  Photoshop Camera Raw 7.4

  There was an error of installation of this update. Quit and try again later. Error code: U44M1I216

  
  

  Update 6.0.5 extensions Manager

  There was an error of installation of this update. Quit and try again later. Error code: U44M1I216

  
  

  Adobe Photoshop 13.0.5

  There was an error of installation of this update. Quit and try again later. Error code: U44M1I216

  Appreciate any help and suggestions.  Thank you.
  

  Hi Jeff,

  I had a whole series of mistakes differrent, but thought of the discuussions in http://forums.adobe.com/message/5273970#5273970 would be the resolution, but as you can see by my comment on this subject, that this still has not first solve my problem. I finally solved it by using this solutions all in contact with technical assistance, although I do not understand what we did different, he still was't straight forward and had several attempts to succeed. Still seems to be a problem Adobe must answer, especially with the new CC version and update to come Monday, I bet that there will be a lot of discussion of this problem the week next in the forums.

  See you soon

• 0x800A0046 error when you try to install the updates

  From: RCTaubert

  I just did a clean install of Vista Ultimate.  After downloading all the Vista updates, using Windows Update.  More updates installed for a few failed. I reinstalled Office Pro 2007.  I tried to install "Microsoft Update so I can get the Vista & Office updates on a single screen.

  From the "Windows Update" screen, I clicked on 'Get updates for more products'.  Which takes me to '

  http://www.update.Microsoft.com/microsoftupdate/v6/vistadefault.aspx?ln=en-us '.  I except the "terms of use" and click on "install".  I click on UAC to continue and immediately meet with the error message and the next failure: Microsoft Update could not be installed on your computer

  Make sure that you log on as an administrator or as a member of the Administrators group, and then try again.

  More troubleshooting options

  If your computer is connected to a network and the problem persists, contact your system administrator to see if your Microsoft Update settings are managed by using Group Policy. If your computer is not connected to a network, or if your system administrator has not disabled Microsoft Update, check if the Windows Update service is disabled or stopped. For information about how to start a service, search help and Support on your computer.

  Note: If you encounter problems with the installation of Microsoft Update, you can continue to get updates for your computer by going to Windows Update in Control Panel.  [Error number: 0x800A0046]

  I tried searching for this error number and found most of the questions & answers to several years.  I checked some of them out and found, I had already solution in place.  Hoping for more responses to day I write this messa.

  What should I do next?

  From: TaurArian

  See: Error Message When you try to install Microsoft Update on a Windows Vista-based

  computer: "could not install Microsoft Update on the computer.

  http://support.Microsoft.com/kb/933528

  --

  TaurArian [MVP] 2005-2009 - Update Services

  Another response of the community of Windows Vista discussion groups

• Error 80070652 occur when you try to install the update for microsoft works 9 and 2007 microsoft office suite Service Pack 2 - why?

  CONTINUE TO RECEIVE AN ERROR 80070652 CODE WHEN I TRY TO INSTALL THE UPDATES FROM THE WINDOW FOR MICROSOFT

  WORKS 9 AND 2007 MICROSOFT OFFICE SUITE SERVICE PACK 2 - WHY?

  Hi SonjaThibodeaux,

  ·         You are able to install all other updates without any problems?

  ·         Remember to make changes to the computer, after which the issue started?

  ·         What are the KB numbers associated with the updates?

  Try to reset Windows updated components and check if it helps:

  How to reset the Windows Update components?

  I hope this helps.

• When you try to install the updates, I get an error message 204.

  Hello

  Help! When I try to install CC updated it stops at 2% and one I get an error message 204.

  Bob

  Error 204 (Mac only?) https://forums.Adobe.com/thread/1492846

• 800b0100 error when you try to install the update KB968816

  Well, I get this error (800 b 0100) whenever I try to install the update KB968816. I have downloaded and run the system update tool. He has not fixed it.

  Is there a solution for this error?
  My plug for my laptop is:

  HP Pavilion DV5 1002nr
  3 GB memory
  232 GB of available disk space

  Thank you, Nick Hanson

  A program on your computer is perhaps interfere with the installation of KB968816.

  Try manually downloading and installation of (your anti virus or security software may interfere)

  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB968816&displaylang=en&sType=s_basic

  Try to install after a clean boot.

  support.Microsoft.com/kb/929135
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  TaurArian [MVP] 2005-2011 - Update Services

• Error when you try to install the updates to rules

  Hello

  I face below, the error message when you try to inject the new updates to the rules. Namely: Sourcefire_Rule_Update-2016-02-18-003-vrt.sh

  All the solutions on this one? For more information, I downloaded the file from the site and the name of the file has not been changed.

  sf_error.jpg

  

  Hi Tarik,

  I've seen this error when you use Internet Explorer to manually import the update rule.

  You can try a different browser supported.

  The release notes for the version that you are using will have the information of supported browser.

  Thank you

  Guillaume

• After reinstalling Vista, when you try to do Windows updates get error 80073712

  Initial problem was unable to update windows. Reinstall Windows Vista. Now meet 80073712 error.

  Is there a reason why you don't have not advised SP level you use, etc.?

  http://support.Microsoft.com/kb/555375 >

  There is a tool that will try to fix the inconsistent to the component store but, State if the system has malware resident, then it may not work properly.
  
  A general solution, *IF* is no malware problem, would be to run the system update tool.

  (When was the last time you checked your system for malicious programs?)

  The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update error 80073712 error code.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool>

  Read this:

  Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712".

  http://support.Microsoft.com/kb/957310>

  NOTE: Before going through the steps provided for in article KB957310, I suggest you you to reset windows component update and check if you can install the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058>

  UTC/GMT is 12:26 Tuesday, June 12, 2012

• Windows 7 - get error when you try to install the updates, code 66A

  I have error when I try to install update!  Code 66A. What should I do?

  
  

  * original title - I have error when I try to install update! Code 66A. What should I do? *

  Framework of 66A
  http://social.answers.Microsoft.com/forums/en/vistawu/thread/52538332-710e-4C29-BD5B-d08db7555bb3

  Step 1

  You can follow the steps below and check if it helps solve the problem of update installation.

  (a) click Start and click on Control Panel.

  (b) go to programs and features.

  (c) scroll down to Microsoft.Net Framework 4 Client Profile, do a right click.

  (d) it will give you a choice of uninstall/change, click it.

  (e) then it will give a choice to repair, choose repair. It will take 4 to 10 minutes to fix and may vary.

  (f) one when you're done, go to your update and Update Center again.

  Step 2

  If the steps above do not help, access the link below and follow the steps described in the article and try to uninstall all versions of the .NET Framework on the computer and reinstall all the versions of the .NET Framework on the computer.http://support.microsoft.com/kb/923100

  Check this reminder in the well: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f1dd866f-85b7-4ae6-bc32-1c488c19742a
  Diana D. (Microsoft Support) credit releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• good sign in info does not work when you try to install the updates

  My sign in the name of user and password works fine when signing CC.

  Occasionally, I get a window telling me of updates are available.  When I try to connect for updates (using the aforementioned username and password) they are rejected, which makes impossible updates.

  Adobe's Web sites have always been a little weird according to my experience, but this is nuts.

  Help!

  Could you please try with the username administrator on the computer and the password.

  Concerning

  Hervé Khare