When you try to open a program, it says incorrect parameter, c: access denied and cannot download or uninstall anything
Original title: c drive
Hello, it seems that when I try to open a program, it says incorrect parameter. Then when I try to access my c drive it says access denied that it won't let me download anything or to uninstall no matter what or how to solve this problem
Hi shelleymccrory,
1. When did you start to question?
2. you remember to make changes to the computer before this problem?
Step 1:
You can check in safemode, if the problem occurs.
Check out the link:
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Step 2:
You can also check the following link and try to download the Microsoft Safety Scanner and perform a full scan on your computer and check.
Note: When you perform the analysis, there are risks of data loss you can take a backup of important data before performing analysis.
Check out the link:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Hope this information is useful.
Tags: Windows
Similar Questions
-
'C:windows\system\run1132.exe' when you try to open any program.
C:windows\system\run1132.exe
I try to open any program on my pc and all I get is
C:windows\system\run1132.exe
Hi kennyken,
It seems that it is a virus infection.
· Which antivirus program is installed on the computer >?
You can run the Microsoft to check security scanner for any infection by virus. Check out the following link.
Microsoft Safety Scanner - free online tool for PC health and safety
-
Receiver prompt "choose a program to open with" when you try to open any program.
original title: programs
Whenever I click to open a program in another window opens asking me to choose a program to open with. How can it define how far he runs automatically? and why this is happening?
Open with appears whenever I try to open a programScroll down to the answer given by Phantom010:Download and merge the reg. EXEFIX .quote...Try this registry fix: EXEFIXUnzip the patch and extract it. REG file on your desktop. Right click on the REG file and choose Merge. Note that you must be an administrator to apply this hotfix.
Reset. -
This happens when I try to open the zip files downloaded, photos or music.
This happens when I try to open the zip files downloaded, photos or music.
====================================================
No guarantee... but maybe the following discussion offers a few ideas:Vista crashes when opening zip files
http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/Vista-freezes-when-opening-zip-files/4e0ba5bd-cb57-4c76-9601-04746732e5edThis article may also be useful:
Windows Vista - compress and uncompress files (zip files)
http://Windows.Microsoft.com/en-us/Windows-Vista/compress-and-uncompress-files-ZIP-files -
When I try and open a program I get the box "choose the program you want to use to open this file. Also, when I try and access any of my icons in my control panel, I get a message saying 'C:\WINDOWS/system32/rundll32.exe. Aplication not found. "
Uninstall mywebsearch toolbar, Zynga, my fun cards
Check these then check fix checked. Narrow browsers
O2 - BHO: (no name) - {5C255C8A-E604-49b4-9D64-90988571CECB} - (no file)
O3 - Toolbar: (no name) - {CCC7A320-B3CA-4199-B1A6-9F516DD69829} - (no file)
O4 - HKLM\... \Run: [NeroFilterCheck] C:\WINDOWS\system32\NeroCheck.exe
O4 - HKLM\... \Run: [HP Software Update] C:\Program HP HP Software Update\HPWuSchd2.exe
O4 - HKLM\... \Run: [QuickTime Task] "C:\Program Files\QuickTime\qttask.exe" - atboottime
O4 - HKLM\... \Run: [MyWebSearch Plugin] rundll32 C:\PROGRA~1\MYWEBS~1\bar\1.bin\M3PLUGIN. DLL, UPF
O4 - HKLM\... \Run: [my Web Search Bar scope monitor research] "C:\PROGRA~1\MYWEBS~1\bar\1.bin\m3SrchMn.exe" / m = 2/w/h
O4 - HKLM\... \Run: [MyWebSearch Email Plugin] C:\PROGRA~1\MYWEBS~1\bar\1.bin\mwsoemon.exe
O4 - HKLM\... \Run: [SunJavaUpdateSched] "C:\Program Files\Fichiers Java Update\jusched.exe"
O4 - HKLM\... \Run: [adobe Reader Speed Launcher] "C:\Program 9.0\Reader\Reader_sl.exe Adobe."
O4 - HKLM\... \Run: C:\PROGRA~1\MYFUNC~2\bar\1.bin\c8brmon.exe [MyFunCardsbarIE Browser Plugin Loader]
O4 - HKLM\... \Run: [TkBellExe] "C:\program files\real\realplayer\update\realsched.exe" - osboot
O4 - HKLM\... \Run: [KernelFaultCheck] %systemroot%\system32\dumprep 0-k
O4 - HKCU\... \Run: [BitTorrent DNA] "C:\Program Files\DNA\btdna.exe"
O4 - HKCU\... \Run: [BitTorrent] "C:\Program Files\BitTorrent\bittorrent.exe".
O4 - HKCU\... \Run: [MyWebSearch Email Plugin] C:\PROGRA~1\MYWEBS~1\bar\1.bin\mwsoemon.exe
Then download malwarebytesto day then do a full scan
You are probably infected by something you downloaded with bittorrent
-
When you try to open other programs Windows Media Player opens instead
Original title:
Program Glitch
Almost all programs on my laptop are glitching out and whenever I try to open them, they open Windows Media Player instead, please help, its really annoying and a pain.
Hello
This should help you.
'Restore. Association of exe in Windows 7/Vista after incorrectly associating it with another program"
http://www.Winhelponline.com/blog/restore-exe-file-Asso-Windows-7-Vista-incorrectly-associated/
"When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program.
Run the Mr.Fixit here or you can use the manual method it y to correct yourself
http://support.Microsoft.com/kb/950505/en-us
And also, read information please.
'Change the programs that Windows uses by default'
http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default
See you soon.
-
Glitch in CS6 when you try to open the program, it is impossible to use
I am running windows 7 64 bit on my PC. I don't know what I did, but whenever I try to open the preimere, window leaves me hanging around, I get the chime sound you hear when there is a secondary command window open, I guess it's one who wants me to set up the stage for editing. However as the window opens with only the visible upper part, I know exactly, what is happening. I can't close it or fix it or move it. I hit the return key, which causes the closure but that baffles me too much from the program.
So right now I'm unable to use the program. I tried to install the last update, but I think that its just something that I screwed up the last time that I used it.
You could try to reset your preferences:
Hold down the ALT key while you start PR.
Keep pressed until you see the Pr welcome screen.
More information about resetting preferences:
http://blogs.Adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html
-
Error messages occur now - seem to appear now, after I did a Defrag. If I try to open AOL, it brings me to a display list who wants to choose from a list of programs. For AOL, I click on AOL. I didn't used to have to select from a list of display. Then I tried to open an Astrology program and it took me to the same list, which of course is not. Now, I get the same error as follows: C:Windows/system32/rundll32.exe - Application not found - OK
Here's a Plan:
Goto, start system restore restore Menu\All Programs\Accessories\System Tools\System
Now select the oldest Restore Point and restore your computer, but first make sure that you have an external drive.
After that C:\Windows\System32\Rundll32.exe copy the external drive and the disc is ejected
Open the system restore and undo restore
After the undo operation is copy the Rundll32.exe in the road to C:\Windows\System32
and the problem solved
Note: the rundll32.exe should be missed recently and you should have an old Restore Point which contains a file Rundll32.exe Intact
-
NETFramework 2 error message when you try to open a program
How to fix this problem?... even with takeoff netframework then put it back, the same error message just shut up... can not find an answer to the difficulty and you can you please help? Thank you
Hi Linda has white M,
· What is the exact error message?
Follow these methods.
Method 1: Install .NET framework 2. Follow the steps in the article.
How to manually remove and then reinstall.NET Framework 2.0
http://support.Microsoft.com/kb/908077
Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Startand then click run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
-
I need to make my project please if you can answer a little fast and how to solve this problem, it is for all
Hi Robyn,
Welcome to the Microsoft Community and thanks for posting the question.
According to the description, it looks like you are facing a problem with the file association program on Windows XP.
I suggest you to see the steps in the following Microsoft article.
How to change or choose the program that starts when you double-click a file in Windows XP: http://support.microsoft.com/kb/307859
Reference:
How to change your default programs and enable or remove access to Microsoft Windows programs and non-Microsoft: http://support.microsoft.com/kb/332003
Hope that the information provided is useful.
If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
-
lllegal System 32 relocation
DLL user32.dll system was moved in memory. The application will not work correctly. The move took place as C:\WINDOWS\system32\SHELL32.dll DLL occupied an area of address reserved for Windows system DLLS. The vendor supplying the DLL should be contacted for a new DLL.
When I open Google chrome, VLC Media Player, an error message show me but the program cannot play.
Hi Rabi,
· Did you recently install any update of Windows?
You can check if this article helps.
-
Microsoft's Jet in Win7 database error when you try to open a program
Running Windows 7 Ultimate
We have two programs that are essential to our activities, making use of files using file extensions <.mdb>and <.dld>.
We have not used a program for a few weeks and now Windows Update, updates including Service Pack 1 installed.
Later, I opened one of the programs, and he opened with a window in the middle of it which announced:
It is already opened exclusively by another user, or you need permission to view its data. >
I looked at the file in the program folder and its icon is passed under vacuum to show as a Microsoft Jet db file. So I changed it to associate only with the program who tried to open it. Then I tried again and got the following error:
It is already opened exclusively by another user, or you need permission to view its data. >I tried to re - associate the <.dld>but it did not.
Last thing I tried was to open the same program and files on a laptop as we go out to workplaces. He worked as always. I looked at the <.mdb>extension and its icon was/is always empty. This laptop has downloaded and installed the updates today, but still is to be restarted - that I have not done. I guess they are the same updates.
I have heard of problems with SP 1... What is a likely culprit? Should I try a system restore? Or is it perhaps something else?
DRM for all the advice.
Hello
Please keep us updated on the issue.
Are you connected to a moral or a domain network?
If you are not connected to a domain network, and you are facing this problem after installing some updates.
To check if the problem is caused due to Windows updates, I suggest you perform the system restore and see if it helps.
To run the system restore, refer to the article below:
System restore
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
If you are connected to the domain network, I suggest you send your query in the TechNet Forums.
TechNet: Ask a question or start a discussion
https://social.technet.Microsoft.com/forums/en-us/newThread
Hope this helps, get back to us if you need further assistance for Windows.
-
Re: Windows 8, Adobe Photoshop CC, 16 error when you try to open the program
What is the cause of this error 16?
Its my third attempt to use the software with of a hassle...
What is the problem with the dev team. Building a business with it's a real challenge.
#frustrated
Tony dovale
Hi Tony,.
Please check the help below document:
Kind regards
Sheena
-
Download updates for
There was a problem with that caused it to stop working correctly.
Your computer may run out of updates that can help improve its stability and security.
Go online to search for and install the Important updates and recommended.
In the left pane, click check for updates. If updates are found, click view available updates.
Select all important updates and then click install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Note
If you have activated the automatic update, you can not see important updates listed. If this is the case, the updates have already been downloaded to your computer.
I am aware of the windows updates.
Try to compact and repair the database and see if it suits it. See www.oehelp.com/WMUtil/
Also be aware of the problems caused by the installation of IE9: see www.oehelp.com/OETips.aspx#15
And beware of interference antivirus. See point 3 on this page as well.
Steve
-
Original title: msg error Searchsettings & bad Image problem
How to solve the search parameters & bad image of my windows XP error message? Whenever I start my Windows I have error of search parameters, and if I try to open some applications like YM or CHROME or all the other apps, I received the following message.
DLL C:\WINDOWS\system32\mmebaetf.dll. It's so disturbing. Please help me solve this.With respect,
Rosaline.Hello Rosaline48,
Thanks for the return of the response. Have you tried to boot safe mode to see if you can reproduce this error when you try to open any program? You have scanned your computer for malware or viruses?
Safe mode:
Last good known Configuration:
http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration
Maybe you are looking for
-
my new soon to be iphone 7 more support dual band
Please tell me my soon to be the device supports wifi dual band, i.e. 2.4 and 5 ghz. my router is also dual-band and ac with comcast.
-
Dear all! I have a problem. I just got a hp g1n12ea and it has 3 USB port. And two of them do not work. I guess it's a software problem. Can someone help me?
-
How to make a page my home page?
I opened a new tab and that the tab is what I want to do my homepage, but I don't know how... Please help me someone...
-
Windows Update: problem webite cannot display the page
Just install a new hard drive and reinstalled the original XP Media Center operating system. I get this error when you try to get the windows updates: the site has encountered a problem and cannot display the page you are trying to view. The options
-
My outlook express email back past ' e does not work for windows xp
It says server can not be found. * E-mail address is removed from the privacy * Raw purple