When you try to run the SFC/scannow I get the following message: Windows Resource Protection could not perform a requested operation.

Similar Questions

• Error message "Windows Resource Protection could not perform the requested operation" when running SFC scan.

  As suggested, I tried to run scannow to repair Windows Vista.  I did, but then the scan only ran up to 76%, I received the message: Windows Resource Protection could not perform the requested operation. "How can I complete the scan and fix my Windows Vista computer

   
  Hi rdoran,
  You perform the steps from the administrator account?
  
  To determine which files can be repaired by the System File Checker tool, follow these steps:
  Step 1:
   
  NOTE: When SFC is running, it records its actions in the C:\WINDOWS\LOGS\CBS\CBS. NEWSPAPER. You can find specific entries of SFC searching [SR] tags in the newspaper.
  
  For how, see the SFC analysis details in the CBS. JOURNAL:
   
  * Open an elevated command prompt.
  
  * In the elevated command prompt, type findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > %userprofile%\Desktop\sfcdetails.txt and press ENTER.
   
  * Close the elevated command prompt.
  
  * Click the sfcdetails.txt file just set your desktop to see the SFC scan details (those with the tags [SR]) to the CBS. NEWSPAPER.
   
  * You can safely delete the sfcdetails.txt file later if you wish.
  Reply back with the details in the log file.
  
  If it does not help to complete the scan, you can complete the steps below and check out them.
  
  You're able to boot in safe mode ?
   
  Step 2:
   
  For more information on how to log in to safe mode, see the following Microsoft article:
   
  Startup options (including safe mode)
   
  If you're able to boot in safe mode, you can perform a scan of the file system (CFS) auditor.
   
  Reference:
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  
  Step 3:
  
  In addition, you can connect to the command prompt and check the drive for errors, and check if that makes things more simple.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
   
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• SFC/scannow stuck at 70 percent and I get the message "Windows Resource Protection could not perform the requested operation".

  Original title: whenever I run SFC/scannow I get to 70 percent and I get the message "Windows Resource Protection could not perform the requested operation". How can I fix this problem and complete the scan?

  Please answer with repair options and details on where to go to get there.

  If safe mode can't complete, it can be continuous malware (run malwarebytes) so clean, you will probably have to run a repair installation.

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• sfc/scannow error message - "Windows Resource Protection could not perform the requested operation".

  Recently, things are held in my computer after trying themes. I don't know what I fiddled with, but I do know something ExplorerFrame.dll in system32 and sysWOW64. I've tinkered with it to try to change my navigation settings. (The arrows in windows Explorer)  I don't know if that's the problem, but my main problem is when I try to save anything, or "save under" or try to save anything even in microsoft word or adobe reader, none of the folders in my navigation pane is there! It's just empty! I tried to solve this problem with sfc/scannow, but the message that I put in the title appears when it reaches 10%! I've tried everything literally! I tried running sfc/scannow offline, and it comes up with a message 'Protection of resources Windows could not start the repair service.' I also tried to check in my services to see if the Windows Module is manual in the startup type, and it is! The last thing I could think that I tried was the start in safe mode with command prompt, and it still does not. If anyone can help me, please! I've tried everything! * I forgot, I have try running CMD administrive rights, still won't work *.

  Thank you for the help, but I figured it out by myself. I replaced the old version ExplorerFrame.dll in system32 and sysWOW64 folders to a new! I managed to do it by copying the correct files to another computer and replacing them with the 'old' I have fiddled. Thanks for your help!

• Parse error SFC "Windows Resource Protection could not perform the requested operation".

  Original title: my computer is messed up, and I'm unable to fix
   
  (1) double click on files will open in a new window
  (2) not possible to delete several records
  I tried to find and implement several solutions found on these forums for the 1st problem listed above. I tried to go into folder options and disable double click open files option and I tried to replace with original system files according to the http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folders-open-in-new-window-despite-folder-option/5fba3897-7655-4068-8992-2d8b20063b3f and nothing has worked. I tried to run the command prompt in administrator mode to scan files using the command "sfc/scannow" and even that did not work, as when checking for 59%, it says "Windows Resource Protection could not perform the requested operation"
  I tried to create new administrator user accounts and the problem persists.
  I am also unable to delete some files. Internet Explorer would be my best and later example. I ran microsoft update, it installed IE10, and I was unable to start IE. I have not found in the list of uninstaller, so I tried to delete the files manually but Icould do not, that I needed approval from "TrustedInstaller". I played a bit with permissions and gave myself all permissions, with the exception of special permissions (which was grey), and then he said I needed the permission of 'Administrators' when I tried to delete the folder. Well, I'm on my administrator account, what the devil?
  I ran some virus scans of Malwarebytes Anti-malware, Virus of Sophos, Microsoft Security Essentials, and 2013 Bitdefender removal tool and removed something taken before implementing ALL the solutions mentioned above attempts. Try a system restore after that these scans completed, I discovered that I had no restore point before the installation of the Microsoft fix - it (i.e. when I was first trying to tackle these questions)
  Is there something I can do?

  You could make a backup of the image to a DVD or disk.

  Renee

• Sfc/scannow error: Windows Resource Protection could not perform requested operation

  Hello

  I'm having a problem. All of my windows files are corrupted. When I changed the theme, it's always the basic theme of load. I don't know why. Maybe it's because I never have it patched with Universal Theme Patcher. I know that this will change the windows file, and windows he refused. I'm sorry windows.
  So I want to make a repair. I ran everything. When I ran the system restore, it is said that the antivirus blocked the system restore. I have search on this site, but there is no help. I take the Startup Repair, nothing changes. So my last hope is run cmd and type sfc/scannow.
  And then cmd stop the scan and says Windows Resource Protection could not perform requested operation. I'm looking for help on this site, I have nothing. I did not help
  Please help me. I don't want to reinstall my Windows. Any ideas are welcome. But when no one can help me, what should do?

  Hello

  Method 1:

  a. Click Start, type services.msc in the start search bar and press ENTER.
  b. Locate the Volume Shadow Copy service.
  c. click cliché instant volume, then select restart.
  d. now make a right-click Volume shadow copy, and then select Properties.
  e., under Startup type, select automatic.

   

  Method 2:

  Check your hard drive for errors.

  Follow the below mentioned article:
  Check a drive for errors
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• I get the following message: windows service install could not be accessed. Anyone know what I can do?

  I can't download anything to my cmptr more.  I get the following message: windows service install could not be accessed.  Anyone know what I can do?

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  I suggest you follow the steps below:

  Method 1:

  Check if the installer of windows services are running, follow the steps below:

  a. Click Start, type Services.msc and press ENTER.

  b. double-click Windows Installer.

  c. set the start type for Windows Installer to manual.

  d. Click Start to start the service.

  e. click OK.

  Method 2:

  Re-record an installer of windows follow the steps below:

  a. click Start, click run and then type cmd in the dialog box, and then click command prompt.

  b. at the command prompt, type the following and press ENTER after each line:

  c. to unregister the type install windows MSIExec /Unregister.

  d. to re-register MSIExec/regserverwindows installer type.

  e. try to download.

  Method 3:

  If the above step fails the utility auditor system files to run it and check the missing or corrupt files follow the steps outlined in the article below:

  http://support.Microsoft.com/kb/929833

  I hope this helps.

• SFC/scannow error message: Windows Resource Protection could not start the repair service

  I am trying to solve a problem with a HP Pavillion Vista laptop where I get a black screen after screen of the HP logo with a message that says "the file is maybe damaged. The file header checksum does not match the checksum calculated. »

  Hello

  I wrote a post on running a check offline that someone might find it useful,

  http://mikemstech.blogspot.com/2011/12/how-to-perform-offline-system-integrity.html

• When you try to download full tilt poker, I get an error message saying that the qtwebkit4.dll lack export user 32.dllgetlastinputinfo. This is a used computer, I bought and I don't know if it's a setting that they have on it or not.

  I get an error message when the full tilt poker download which says that the qtwebkit4.dll file is linked to the file missing getlastinputinfo user32.dll export

  Hi Sandymon,

  Welcome to the Microsoft Answers site!

  Do you get this error only when you try to download only this particular game or something else?

  From now on, I would say lets you do a [SFC] System File Checker scan on the computer. He will try to repair the system files missing or infected.

  Scan SFC enforcement procedure:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all files must be replaced, SFC will replace them. You may be asked to insert your DVD of Windows Vista/Windows 7 for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, please visit the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you try to run a system recovery I get this error: cannot start Windows. A recent hardware or software change might be the cause. OxcOOOOOOf

  When you try to run a system recovery I get this error; OxcOOOOOOf

  Original title: error OxcOOOOOOf

  My laptop crashed. I used my initial recovery to start. I get a message from Windows Boot Manager as follows:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have this disc, contact you system administrator or computer manufacturer for assistance.

  File: \Windows\system32\winload.exe

  Status: OxcOOOOOOf

  Info: Seelected entry could not be loaded because the application is missing or damaged.

  It does not work. Suggestions and no, I have not modified before the crash.

  I loaded my recovery disk for my 32-bit home edition of vista Hp pavilion dv6700 cto entertainment lapt top and after going through the recovery process I just get this mechioned of the screen in the original question. How ever during my recovery process never got far enough to enter my product code, he asked just a two disc and disc supplamentry and then gave me a blue screen black for a minute or two then rebooted and showed the failure of start OxcOOOOOOf screen... what should I do?

  Hi Anthony206,

  Since you've already tried to use the Windows Vista recovery disc has received from the Original Equipment Manufacturer (OEM).

  From now on, you can only contact OEM for the use of the recovery feature.

  I hope this helps.

• I bought Illustrator for a month, but when you try to run the application, it asks me to 'renew subscription '. I have tried reloading illustrator twice and reloaded CreativeCloud but it still does not work. What else can I try? I immediately need to HAVE

  I bought Illustrator for a month, but when you try to run the application, it asks me to 'renew subscription '. I have tried reloading illustrator twice and reloaded CreativeCloud but it still does not work. What else can I try? I need immediately GOT to work

  Log, activation, or connection errors. CS5.5 and later versions

  Mylenium

• I had installed the captain claw game and when I try to run the following error report is: of the Side-Scrolling Action-Arcade game has encountered a problem and needs to close.

  original title: C:\DOCUME~1\hariraj\LOCALS~1\Temp\7f3f_appcompat.txt

  I had installed the captain claw game and when I try to run the following error report comes... Please solve my problem...

  ....

  ARCADE-ACTION SIDE-SCROLLING GAME

  Of the Side-Scrolling Action-Arcade game has encountered a problem and needs to close.  We are sorry for the inconvenience.

  ERROR SIGNATURE

  AppName: cla.exe AppVer: ModName 1.3.0.60: cla.exe
  ModVer: 1.3.0.60 Offset: 000f3956

  THE FOLLOWING FILES MUST BE INCLUDED IN THE ERROR REPORT

  C:\DOCUME~1\hariraj\LOCALS~1\Temp\b285_appcompat.txt

  Please please please please help me... i will be grateful to you

  Hi Raj Kumar,

  You can follow the steps mentioned in the article below, which deals with a similar question

  Game hangs or quits unexpectedly
  http://support.Microsoft.com/kb/303032

  (Article apply to Microsoft games, steps for other games)

• When you try to retrieve the updates of Windows XP, I get an error of 0 x 80070424. This number does not profile in any recommended solution.

  When you try to retrieve the updates of Windows XP, I get an error of 0 x 80070424. This number does not profile in any recommended solution

  Hello

  This should help you:

  "Error 0 x 80070424 occurs when you use Windows Update, Microsoft Update, or Windows Firewall.

  http://support.Microsoft.com/kb/968002

  See you soon.

• When you try to export images of Photos, I get an error message saying that I am unable to do it because I need an internet connection. That I have. Any ideas?

  When you try to export images of Photos, I get an error message saying that I am unable to do it because I need an internet connection. That I have. Previously, I was able to simply select, make drag & drop in a folder open access to change. Any ideas?

  When you try to export images of Photos, I get an error message saying that I am unable to do it because I need an internet connection.

  Could something intercept Internet to iCloud photo library and cause delays? A firewall or Antivirus filter?  Have you recently installed software?

• When you try to run the system on gateway mx6453 recovery, recovery begins a box opens indicating the system restore is incomplete, please insert the cd or dvd

  try to run the system on gateway mx6453 recovery, opens the recovery page, but then appears a box that says system restore is incomplete, please insert the cd or dvd.  the recovery partition seems to agree.

  Hello

  · Why are you running the system recovery?

  · Are you able to perform system restore on the computer?

  I suggest contacting the manufacturer of the computer, the link you can check: http://support.gateway.com/support/default.aspx?cmpid=topnav_support

  For reference: Troubleshooting for problems when you try to use the System Restore tool in Windows XP: http://support.microsoft.com/kb/302796