When you use the batch, record with the same file name in the same folder.

I therefore about 500 pictures that needs to be cropped. I created the cropaction and added a "backup" function and close in action, because I want the photos to be saved with the same file name in the same folder...

Now I want that it take its course. But no, I have to press ok to confirm the backup on each photo.

Someone knows how to fix this?



I solved it.

I forgot to check the box "override save under ' :)

Tags: Photoshop

Similar Questions

  • DSC-WX150 will stop recording at 03:00 minutes when you use the HDMI video output


    I have a Sony Cybershot DSC-WX150 camera.

    When using an output HDMI cable to view the camera to a television screen, the video movie recording function to 3:00minutes exactly every time automatically stops.

    When there is no HDMI cable plugged into the camera, it records fine 20 minutes.

    I tried changing film formats, changing the power settings, camera reset the values by default, etc., but with no difference.

    Why it only record at 03:00 minute exactly mark when you use the HDMI video output? Someone knows how to fix this?

    Thank you

    Hi tight,

    Welcome to the community of Sony!

    If I understand correctly, when you use your TV as a monitor while video recording automatically stops and does not cross the entire 29 minutes. Based on your manual, it is normal for the camera when it is connected to another device via the HDMI cable. This serves as protection for the camera.

    If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

  • When you use the Polygonal Lasso with 13 elements, I get the message 'no pixels are not selected to more than 50% ' why and how to remedy?

    When you use the Polygonal Lasso with 13 elements, I get the message ' WARNING: no pixel is selected to more than 50 percent. "  Why - and how to fix it?

    Make sure that the correct layer is selected.

    Decrease the amount of feathers.

  • When you use the media player, it is possible to take a song that's already torn in our library and announced another song or part of the same song at the end? kinda like a mix.

    When you use the media player, it is possible to take a song that's already torn in our library and announced another song or part of the same song at the end? kinda like a mix.

    Windows Media Player is not a Publisher.

    You can use Windows Movie Maker to split
    and combine audio files, but it works better
    If they are in the. WMA format.

    Also the free Audacity software may be worth a try:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)



    How to split a long recording into multiple files or CD tracks?

    How to combine two files into one longer file?

    How to mix songs with Audacity

  • Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

    I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

    Firefox Pei
    "C:\Program Files (x 86) \Mozilla" PEI

    Nothing happens with every order.

    I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

    If you have any ideas, I had appreaciate that your expertise!

    Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
    you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

    Fix Firefox problems caused by malicious software

  • How to enter the character ü when you use the pinyin keyboard?

    How can I enter the character u when you use the pinyin-simplified keyboard, for example, for the opening of the syllable nu with your 3.

    The keyboard pinyin-simplified is for entering the characters han, not latin.  If you want to type the latin pinyin, you must use the extended ABC keyboard configuration.  A list of the shortcuts is to


  • Is cell required when you use the map applications of conduct?

    Is cell required when you use the map applications of conduct?

    Yes. GPS does not work with a Wi - Fi connection.

  • MainStage "lag" when you use the SPACEBAR as 'play '.

    Hi all, I'm relatively new to Mainstage (V3), and I'm hoping to use it for the first time this weekend to play the extra backing with a band tracks

    The issue I'm having, is that with the SPACEBAR of laptops on 'PLAY '. It is often "lag". or simply does not start the song. I have to wait a second, then hit again, it will work.  It is almost as if in Performance mode, when you use the down arrow key to select the next song, the 'focus' is on the list of patch, and if I click in the background where are playback buttons and stop, THEN that will work. I have not, however, been able to reproduce this particular behavior on a consistent basis.

    Everyone knows the same thing? Or why it is so 'all or nothing '?

    And a question important much donor... I gave all my reading titles to the waveform appropriate the other night (so I could visually see the waveforms above the attenuator as offers of backing track model), however, once I was moving songs in a different order, which stopped working. No idea why?

    Thnaks in advance

    About the offset by hitting the space bar, a thought occurred to me.

    How Mainstage allocates 44.1/16 bit wave files used in the reading plug-in? Which means, when a song is selected, which uses, for example, to separate the 5 cases of reading, one can assume that these audio files used in that song would need to "load" first.

    Anyone know if this is how Mainstage works?

  • M40X-141: black screen when you use the WiFi network

    Since I bought my M40X 141 in July 2005, I got black screen frequently when you use the wifi.

    You know this black screen with typical noise from the hard drive.

    I did all the updates without effect. The local seller understood nothing black screen, associated with the use of wifi.

    In the XP world, nobody seems to find this kind of abnormal things so I'm desperate to find a solution to stop the frequent black screens. Recently try a usb dlink wifi dongle (dwl-G122) the constant flow of black screens disappeared
    (An Xp session 10 days was previously impossible).

    Now, I know this is a bug in the original software and I try desespartely to find a patch or updated driver or professional advice.

    Is there someone here who can help a tired multi restart man to use his laptop with the original material?

    Your laptop should still be guaranteed if you bought in June 2005. Take it to your authorized Service Provider nearest and have their say. They should already provide for a procedure for this and know what to do. Sure the frequency that uses WIFI and display inverter coincides, and you get the black screen. Change them should fix this problem.

  • Satellite L40 crashes when you use the product recovery disc

    When you use the product recovery disc to repair my laptop it hang after language page display.

    Select meaning when it displays the language, I select language and press next, no action more far there... I can move one pointer.

    Some may help how to solve the problem.
    Thank you

    > Select sense when it displays the language, I select language and press next, no action more far there

    Perhaps, your recovery disk is corrupt. What happens if you try with Windows disk copy?

  • No bass when you use the docking station to not probe

    When I use the out port of my docking station (Series edited by moderator) I get no bass sound, just hail my wide range speaker. When the speakers are plugged into the headphone jack directly on the laptop it normal sound, with a full range of sounds. I checked the setting in the CP of its speakers are identified as the range, so this isn't the issue. There is no sound improvement enabled in Control Panel SRS. I'm puzzled. Why no bass when you use the docking station only. I tried two different docking stations with the same result: no bass.

    Yes! I finally solved it on my system:

    • Go to the control panel
    • Choose the material and audio

    or simply to display all Control Panel items

    • Select SRS Premium Sound Pro (it's an icon of circle blue/white)
    • Wait for the program to come black EQ
    • Select the tab/words "listening experience" near the top of the window of SRS Premium Sound PRO
    • Uncheck the 'improvement of Audio '.


    In addition, there is the graphic equalizer in there that totally works well to further fine tune your desired speaker and the audio preference.

  • Loop Finder crash after upgrading to El Capitan.  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English operating system.

    'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English.  The e is a compatibility issue with dropbox or Google drive in El Capitan?  Those are the plug-ins only that I could find.  Thank you very much.

    Please launch the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    Step 1

    For this step, the title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

    Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    Step 2

    In the Console window, clear the search box, and then select

    DIAGNOSIS AND diagnostic USE information reports ▹ user

    (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

    I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

    If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

    In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

    Please do not post other types of diagnostic report - they are very long and rarely useful.

    When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • TestStand crashes when you use the feature of LENGTH

    So I have a problem when you use the TERM built on stage.

    the first time I run my sequence everything goes normally...

    the second time I try to run the sequence it freezes teststand.

    I have notices that when I run my sequence. I can see on TRACK OR the following:


    niSE_connect (routex)


    but after that the sequence is complete. It is not close to the niSE sesion. that this has something to do with the gel TestStand?

    If this isn't the case, have you had this question before?

    I contacted pickering... they got me new drivers

    Response of Pickering:

    It sounds like the problem which came first when NEITHER Visa has been changed, version 5.2 or higher, I think. In any case, I'll try first to install the latest version of the Pickering IVI driver.


    I installed them and it works now...

  • When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

    I work for a company that produces and transforms electric parts. We strive to get in remission at nine of the ECU, experiences, Instrument clusters etc. I'm trying to learn how to use LabVIEW to write commands and read the data on the CAN bus. I have downloaded the NI-CAN driver. I am currently 'play' with the same reception Port.VI show in the basic frame of the finder example API folder OR. I am not able to send the number in the data to write the table that it be read by the ncReadNet Mult .vi. When I put the parameter to 'Pending entries reading' the ncGetAttr.vi returns a 0 to indicate that there are no frames to read. As a result, the Mult.vi ncReadNet does not run.

    I don't have any connected equipment, I use the virtual CAN channel CAN256. Is this the reason why I can't get data frames in my queue for the Mult.vi ncReadNet to read?

    When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

    CAN carry 256 and 257 are connected to eachother through software.  When you write about 256, you can read the data on 257 and vice versa.  I think the example you mention is a writing and reading on the same port, but what you want is to probably to make a copy of this VI, in order to run two at once, where it opens 256 and the other opens 257.  Then, when you write one that you will see on the other.  I think you might be able to use the test panel CAN too read an and use the example of the other.

  • RunState.Sequence.Main vs RunState.SequenceFile? When you use the deployed software?

    RunState.Sequence.Main vs RunState.SequenceFile?  When you use the deployed software?

    Can someone explain to me why when I use something like->

    RunState.SequenceFile.Data.Seq ["Test Seq"]. Hand ["Test not"]. Result.Status

    the status will never be updated if I am set up for LabVIEW Run - Time Engine (but will work for the development of the system).

    Also why->

    RunState.Sequence.Main ["step Test"]. Result.Status

    Update for LabVIEW Run - Time Engine and development?

    I solved my problem with RunState.Sequence.Main ["step Test"]. Result.Status but I'm still curious why the reverse does not work?  Can someone give me please a validation test?

    Thank you very much!

    RunState.SequenceFile.Data.Seq contains the copy of time change sequences. These copies are not at all when running. At run time, a separate copy is made (and is accessible from RunState.Sequence) and only this copy of runtime is updated. These runtime copies are made for several reasons such as the following:

    (1) to ensure that changes to the sequence the runtime, do not affect the original version of the time edit of the file (you don't want to change the status to be an editing tool in the right sequence file?).

    (2) to support recursion, recursive calls in the same sequence have their own copy of the sequence so that State for a call is not crushed by one recursively calls the same sequence.

    There are probably other reasons as well, but these are probably the biggest.


  • Need to reset the button by default when you use the structure of the event?

    When you use the buttons with a mechanical action "releasing lock" to only trigger the same structure with the same 'value has changed', the button does not jump upwards as you would expect.  I can get to behave as I want by adding a "default reset" invoke the node, but this seems somewhat exaggerated.  Is there an easier way to get the button to jump to the top after pressing on?

    The button will reset once it is read by the code. This means that the terminal is inside the structure of the event. If you move outside the terminal, it would read only the beginning of the race and then never and it will not be reset.

    If the terminal is learn the structure of the event, it is read by the code (even if it is not connected to anything) and it reset as soon as the event has a chance to run.

Maybe you are looking for

  • iPhone can be answered even if locked.

    iPhone can answer even if locked... except if you put the password in wrong 4 times... Second, we need the access code. Think about it, if your roommate calls your phone, even if its locked it can respond. Then, he or she will have full access to you

  • increase the volume creates high reverberation as pitch

    increase the volume creates reverberation as high tone sound, what happened all of a sudden andnothing I actually disappear unless I lower the volume. Windows Vista acer aspire 3680, no problem in three years of use.

  • My printer, which is connected through WEP, is "not responding".

    I have an a Canon MG5200, which is recognized by my computer, is 'no result '.  I added my WEP code on the printer, which indicates that it is 'active '.  "And my computer recognize my printer."   Thank you.

  • Slow start - too many programs that run at startup

    Said convenience store startup is slow because my computer is programmed to run at startup programs that slow it down.  What programs can I I disable it in safe, and one time off, how, when, and where can I re - turn them on?  p.s. I'm almost complet

  • Tab in HTML input

    I have a typical HTML entries, and I want the user to be able to tab through them like on a web page. I have not implemented any Javascript code for this, but it works when I run Eclipse Board. But when I install from the Photoshop ZXP grab tab (even