When you use the plan of photography can I be connected to the internet all the time? Data are always deducted when using Photoshop or Lightroom?
When you use the plan of photography can I be connected to the internet all the time? Data are always deducted when using Photoshop or Lightroom?
You should not have a permanent internet connection. You should only be connected when the software must check whether the subscription is still valid.
Tags: Adobe
Similar Questions
-
Can you assign the time of windows logon minutes rather than hours?
Can you assign the time of windows logon minutes rather than hours?
If you are referring to the TIME parameter net user, which is limited to increments of one hour.
If you want to control (and the ability to force logoff as well), you will need to use a third party software. Access Boss a 15 minute granularity. I'm sure like many other applications, probably some of free.
If you only want to restrict Internet access (rather than access to the computer itself), your router may be able to restrict access with granularity to minutes. "Parental control" software, such as NetNanny, also restrict Internet access, although that usually not at the minute.
-
All windows disappear except Composition and Windows calendar when you drag the time indicator current (CTI). When I let go of the mouse, all the windows reappear. I'm sure I've accidentally changed a parameter overview, but I can't find where this setting is. I want just all the Windows I normally opened to stay there while I drag the CTI. Any ideas how to solve this problem?
I have NVidia Quadro FX 3800, driver version 341.92, which is one of the most recent drivers, but that made me think. In the NVidia Control Panel, I checked manage 3D settings and restored all global and set default settings. Now it does not work properly. I think that I have stayed a while to solve something for a different application, and who touched somehow AE. Thanks for the help!
-
Detect if the time/date browse button has been used
Hello
I have a checkpoint vi for the indexing of the elements inside the table and shows the date and the corresponding time. I have the large number of control inside my block signals, but I removed all the blocks out of words and signal for this discussion. I replaced all the unnecessary controls with constant values, so don't waste time analyzing.
If you take a look at my vi, you'll see Star/Stop control, control of Position and an indicator of time stamp (time waveform) with a browse button date/time of another control of time stamp. I have all the features you want, but I have the problem when you use the button browse to bring up the time. I can't put my time twice in a row to the same value as I compare value "Last entry of time" with a current comes to enter. I wouldn't completely change my blocks because I use a lot of variables and property inside my project nodes. I'm looking for a way to figure out if the time/date browse button was pressed so I could jump to the desired in my registered wave point.
I'll skip the actual implementation of what you're doing because it's not all that clear to me and answer the question about to detect if the button has been pressed. This general question came several times before in this forum. There is no built-in mechanism to detect that the Browse in a timestamp control button was pressed. When you click this button, it actually opens a VI with the title 'Set Time and Date'. For example, you can monitor to see if this window opens.
-
After updating my mac in Yosemite, I can't install creative cloud (adobe application Manager). I use photoshop and lightroom and up to now it works.
What can I do?
Best regards
Wiljan screw
Wiljan screw, Thanks for the information.
CC, outil tool cleaning, please remove handler applications for mac OX 10.6.
Re-install creative cloud: creative cloud help | Download, install, update or uninstall applications
Kindly share the results once made.
Thank you
Atul Saini
-
How to restrict the scope of the EU change when the input data are not available?
Hi Experts,
I have a user enter-able (EU) field in the Section. When the tag input XML contains data for this field, then the value must print in this area and it is not editable.
If the input data are not available only that one time that the field of the EU must be editable.
Any thoughts?
I tried like below,
Domain name creation: UE_CompName
Length: 15
Type: alphanumeric
Rule: XDD
Source name:! Transaction/Compname
under PreEdit,.
module: DALW32
Procedure: procedure of desired
Information: CALL ("UE_CHECK")
like that, I've updated in the field properties.
Content of UE_CHECK DAL below,
CurrFieldName = Fieldname()
CurrFieldData = @("CurrFieldName")
IF CurrFieldData! = « »
SetProtect ("CurrFieldName")
END
But it does not work... Pls help me to do this...I assume that the 'mapping' occurs during a batch operation (Gendata) through any rule the XDD defined for this field. In the batch, pre and Post Edit calculations do not. This feature is related to the WIP/entry. What you can do is to add a level section - PostImageDAL rule to call your script and protect your land once it was located batch of your operation.
In FAP that contains that field, add the PostImageDAL rule in the property of the rules in the Section box. In the data box, do call your script.
Your script is a bit wrong, it seems you were trying to get the 'current' domain name and then check the value of fields. Drop the part and simply name your field in the string in quotation marks in the @ () function and the SetProtect. -
How do set you the time, date and month on the HP Officejet Pro 8600 more
How do you set the month, Date and time on the Officejet Pro 8600 more?
Hello
The screen of the device press setup and go to prefferances, and then press ok. There you should see the option "time and date". You can set it from there.
-
When I open the files they are always displayed as a default icons, I would like to change the default setting so my files are displayed as a LIST. How to change this default setting.
Hello combat
Open Windows Explorer/Tools/Folder OptionsOn the general tab, click the options you want.
In the view tab, click the options you want.
On the view tab, click apply to all folders.
Click Yes, then OK
. -
original title: why the time & date that sits on the computer change every time I have Vista premium edition reboot.using
Larson
Larson
Make sure you set your time in the right time zone.
Right-click in the time at the bottom right > set date/time > time zoneIf this isn't the problem, then...
You probably need a rew CMOS battery.
How to replace the CMOS battery
http://www.computerhope.com/issues/ch000239.htmCMOS battery
http://murfsgarage.cybertechhelp.com/CMOS.htmATTENTION: while the battery itself is very good cheap, be careful if you decide to replace yourself.
It is better to have another friend who knows also computer be with you together.The safest way is to pay the Department store. But it will cost you.
Your call. -
Sleep Timer Pavillion DV 7 - How do you set the timer for a different time setting?
Sleep Timer Pavillion DV 7 - How do you set the timer for a different time setting?
Hello Pidcock,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I understand that you want to change on your computer sleep timer. I'll be happy to answer that question for you. Now you have not specified what operating system you are using, so I guess it's the same operating system provided with your computer (Windows 7). I will provide you the HP support document: Management of power (Windows 7 and Vista) Options, which will guide you in how to set the power of your laptop. Just in case you have upgraded to Windows 8 I am also including the HP Support document: Manage the power (Windows 8) Options. This document will guide you through the same steps in Windows 8.
I hope that I have answered your question to your satisfaction. Thanks for posting this question on the Forums of HP. Have a great day!
-
How can I change the creative cloud of membership that includes only Photoshop and Lightroom?
How can I change the creative cloud of membership that includes only Photoshop and Lightroom?
Hello
Please follow:update or change your plan creative cloud
For more details; Please contact customer service
Kind regards
Sheena
-
My IPhone 6s did the update of battery charge you change the time manually or time zone. I wonder if the problem is in the IOS or mobile phone? I say this because I have changed my 6 IPhone in a Bar of genius (Brazil), precisely because of this problem, and the new cell has exactly the same problem
This is a known, problem if the time is not set correctly.
-
ORA-20001: APP-FND-02604: one or more of the following data are not valid
Hello
I use the fnd_user_pkg.addResp procedure to add the responsibility of self-service to a group of users with the script below:
Start
for e in loop (SELECT a domain NAME)
-dbms_output.put_line (e.name); just to confirm the names are there
fnd_user_pkg.addResp (e.name, 'BY', 'CBK_EMPLOYEE_DIRECT_ACCESS', 'STANDARD', 'CBK Employee Self Service', sysdate, null);
end loop;
end;
*/*
eld table contains the names of users to add, in capital letters. When I try to run the script, it fails with the error:
ERROR on line 1:
ORA-20001: APP-FND-02604: one or more of the following data are not valid:
APPLICATION_SHORT_NAME =, RESPONSIBILITY_KEY = CBK_EMPLOYEE_DIRECT_ACCESS,
SECURITY_GROUP = STANDARD.
ORA-06512: at the 'APPS '. APP_EXCEPTION", line 72
ORA-06512: at the 'APPS '. FND_USER_PKG', line 2713
ORA-06512: at line 4 level
However when I run the procedure of inserting a single user at a time, it ends without error. A popular thought.
DulaHello
User_id = this will come from the fnd_user table?
Fix.
responsibility_application_id and responsibility_id = this will be retrieved through a query joining the tables?
You can find it in the FND_RESPONSIBILITY, FND_RESPONSIBILITY_TL tables... See the site for more details--> http://etrm.oracle.com eTRM
Thank you
Hussein -
I have a subscription of CC photo by using photoshop and lightroom. I own Acrobat Pro XI. My desktop creative cloud app keeps saying to update Acrobat DC? I am not a subscriber to the DC?
Hi ChiefLar ,
I would like to inform you that you're not subscribe to the Acrobat DC as is the latest version of the Acrobat program & as you XI Acrobat Pro & Cloud membership for photoshop & lightroom, you keep getting the message to upgrade to Acrobat Pro DC (latest version). If you have Acrobat Pro XI subscription, then you can also install the latest version that is Acrobat Pro DC.
If you XI Acrobat pro as serialized product then you must buy Acrobat Pro DC as improved version.
Kind regards
Christian
-
How to export pictures / albums of iPhotos to external disk and keep the time/date/year and location information changed?
Menu, file == > export - check boxes to include metadata and location- export to iPhoto
LN
Maybe you are looking for
-
Download of firefox on my desk to use as my browser is blocked by ESET Smart Security as "unwanted application" because it contains a potentially dangerous file C:\Win32\Installer\Core.BL.Need for insurance that I won't compromise my system.AM runnin
-
How can I recover my software of audio output?
I uninstalled my software of audio output by accident because a message came saying that a certain type of file couldn t run because of it so I uninstalled but I didn t know what it is that I uninstall and I put t know how to get back it or down load
-
I just bought a m7-n109dx desire and fresh out of the box of the touchpad seems to be depressed on the lower left corner. I guess this is supposed to be on par with the rest of the laptop? Someone can it confirm please? I already sent it once for the
-
not able to findout the video call icon
Not able to find the video call icon in my version of android 2.3 samsung mobile, after you have downloaded Skype application.pl.explain me how use video call my mobile IAM.
-
Two friends send us e-mail, they go in the trash, why?
What's wrong