Whence the ICD file located in a CVS of Linux RT system camera?

Similar Questions

• My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. It is said it can be repaired by using the original installation CD, but we do not have. Any ideas please?

  The file is missing or corrupt is one of your files in the system registry.

  By far, the best way to recover from this is to go to another computer and create a free Hirens Boot CD.
  Download Hirens: <> http://www.hirensbootcd.org/download/ > (link at the bottom of the icon of the disk)
  Hirens CD burning <> http://www.hirensbootcd.org/burning/ >

  Once you create the CD, and then start your system of problem with this CD.  In the first window, select "Mini Windows XP" and wait for the system to start.  When it starts, go to the Hirens Boot CD menu and select
  Register-> Registry Restore Wizard.
  then follow the prompts.  This wizard will return a copy of your registry database from backups that are stored with your system restore points.  After the restoration, stop, remove the CD and restart.

  When you start your system, it is recommended to perform a system restore operation to ensure the consistency of your system
  "How to restore Windows XP to a previous state"
     <>http://support.Microsoft.com/kb/306084 >

  Also, this error is almost always accompanied, if not caused, the corruption of the file system.  Also a good idea to perform a check disk (chkdsk) operation with the option "repair".
  "How to perform disk error in Windows XP check"
     <>http://support.Microsoft.com/kb/315265 >

  The hard way to get back is covered in the following Microsoft KB article, but if you have installed a large number of service packs for your installation of XP, I don't give you many chances to get past part 1. (And there's also an installation CD to access the Recovery Console)

  "How do I recover from a corrupted registry that prevents Windows XP boot"
    <>http://support.Microsoft.com/kb/307545 >

  HTH,
  JW

• Windows didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Please need help, my computer does not start. I get the following message:

  Windows didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Hello

  · What is the number and the model of the computer?

  · What is the service pack installed?

  · You have the windows XP Setup disk?

  · What is the exact error message that you receive when the computer starts in return?

  You can follow the procedure from the following link: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

• Startup error: the following file is missing or currupt/windows/system32/config/system

  Original title: xp dell 2004

  He said that windows did not start because the following file is missing or currupt/windows/system32/config/system

  Hello

  The article below should help you to start your computer successfully.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows didn't start because the following file is missing or corrupted \windows\system32\config\system

  Windows windows xp could not start because the following file is missing or damaged:
  \windows\system32\config\system
  You can accept it corresponds to repair this file by starting windows setup using the original Setup CD
  Select 'r' in the first screen to start repair

  I don't have original cd so I downloaded from the internet.  Only 1 cd when the instructions said it would be 6. that didn't work

  tillieme,
  You will need a valid XP disc to run the repair.  It is possible that the PC manufacturer develop a recovery hard disk partition.  You should check with them to see if it's an option.  Also, some manufacturers will provide filtering alternative for a small fee. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I open the RAW files in Photoshop CS4 to Canon EOS 6 d camera?

  How can I open the RAW files in Photoshop CS4 to Canon EOS 6 d camera?

  You can't directly but can use DNG Converter to convert your files so ACR can read and process the.

  Camera Raw plugin | Supported devices

  Applications of camera Raw compatible Adobe

• How I chose the download file location

  How can I designate where are stored the files I download from the Internet. Can I save files on my desktop? I can't find where the files are current.

  You can find your downloads by clicking on the download arrow in the menu bar. It appears in blue if there are downloads that you have not yet watched.

  If you want to change the default download location, click on the menu button, click Preferences and make sure you watch the General Preferences section. See the following articles for images to guide you if you need.

  • Startup, homepage, tabs and download settings
  • Where to find and manage files in Firefox downloaded

• How can I change the default file locations in the dialog box "Save as" in Windows 7 x 64?

  I tried all the tips and tricks of WinXP, but they do not seem to work in Win7. Does anyone know how to change the location of the default files for the dialog box "Save as" in Win7?

  It seems, in Windows 7, that you cannot change locations by default save as file.

  In XP, we could modify the registry or use other methods to change the location of the files that appear on the left margin of the Save as dialog box. But some Morón in Redmond chose to end with good sense and called "libraries."

  I really wish Microsoft would stop doing what they think, it's the best for Grandma and little Suzy and give us what expect when we pay for these programs.

• Setting the default file locations in Photoshop CC

  In Photoshop CC, I'm looking to set a specific file location where my quick export whenever exports without me having to navigate. To search for a specific folder to save my projects every time.

  Hi Fausy,

  Please check the next of the same discussion thread: Setting Photoshop's default saving location?

  Concerning

  Tanuj

• Error: The database file location: [INS-32012] failed to create the directory.

  Hello

  I have a problem with the installation of database 11 g 2 on OL5.

  Error:

  Location of the database file: [INS-32012] failed to create the directory.

  Although

  drwxr-xr-x 2 root oinstall 4096 Apr 9 17:56 oradata

  drwxr-xr-x 3 755 oinstall 4096 Apr 9 16:27 products

  U01/app/oracle/a 755 permission

  Thank you

  Abhishek

  chmod-r 755/U01

  chown R oracle: oinstall/U01

  the second command change the user and the group owner Of/U01 (including all subdirectories and files) for oracle and oinstall respectively.

  HTH

  Tobi

  Tobi & #39; Oracle DBA s & amp; Blog of UNIX

• where are the location server log and the dimension to generate the error file located?

  I am running a build script and I got this error. Can someone tell me the location of the files below? (The server log and Dimnension generate error file)
  
  Construction of Dimension ERROR - 1007083 - failed. Error code [1090004]. Check the ser
  file log of worm and the dimension generate file for possible more info...
  
  Thank you

  I guess you are on Version 11 as your last post was on this version.

  You are customer of the EAS, take a look at \Hyperion\products\Essbase\eas\client
  If you load using maxl you should have a file of errors defined in the script.
  Newspaper to take a look at \hyperion\logs\essbase there will be essbase.log and application logs are lower than for example \hyperion\logs\essbase\app\Sample\Sample.log

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• all export and import and the data files location

  Hi guys,.
  
  can someone please confirm...
  
  If I export the entire base and my X tablespace uses the loc * 1 data file * / test1.dbf, in the database where I matters now in the data file is in loc * 2 * / test1.dbf, it does make a difference and the data gets imported correctly, Yes?

  If I export the entire base and my X tablespace uses the loc * 1 data file * / test1.dbf, in the database where I matters now in the data file is in loc * 2 * / test1.dbf, it does make a difference and the data gets imported correctly, Yes?

  No, it makes no difference and the import of the data correctly.

• Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  System:

  Toshiba Satellite A-75

  WIndows XP Home Edition
  Fully updated with Svc Pk 3
  HITACHI Travelstar hard drive 80 gig

  Nice day

  I'm getting this ' file is missing or damaged:------WINDOWS-SYSTEM32-CONFIG-SYSTEM ' error and Windows does not start in the F8 boot options. When I disable the auto reboot, I get a BSOD 51 registry error, consistent with the file "missing or corrupt" error Surprisingly "Recovery Console" works so I used to run chkdsk. This has not solved the problem, but even once, surprisingly, the utility reported no fixed error. Ok. I do research online (using another computer of course) and check out the many tips that I copy some files in my "c:\windows\repair" folder in the folder 'system '. Before I had time to do that, however, I found an article from Microsoft stating that this should not be done if you have an OEM System... what I'm doing. Apparently, hives system on these OEM installed OS set other passwords that can permanently block you on your records if you use this method. Thanks for the warning. My system restore disc is nothing more than a tool of re-insall OS that will wipe all my data in the process, and this is not desirable. Currently, I see again all my data on the drive by using the "recovery console". I'm ready to thread the needle on this one in the hope of re - access the operating system, although in some limited capacity. Any help would be greatly appreciated.

  When you run chkdsk in RC, did you use the /r switch? This is the key! In other words, this should be the command:

  Chkdsk /r

  (there is a space before the slash)

  Moreover, KB307545 can be run safely on most OEM XP installations. Of course, nothing is guaranteed 100%.

  Before you do this or else, you really must ensure all data is stored safely. One way to do this is to start on a live Linux CD and then copy the files to an external hard drive. Another way is to connect the problem hard drive into a working PC and copy the files in this way. This could be done by the servo drive or with an adapter like this:

  http://www.Newegg.com/product/product.aspx?item=N82E16812161002&TPK=N82E16812161002

• installation of the installation file located on the hard disk

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Hi, im trying a clean install of vista, the problem is my laptop only has not come with and the installation disc.  installation files and the setup package are in a separate partition on the hard drive but the program a quick control and then stops.  How can I perform a clean installation? is it possible in the back, if it still exists? Thanks in advance.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  General information about how to reinstall Vista are:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot export the PDF file into WORD Doc (that I just bought) system allows me to choose which PDF file but is grayed out in the area where is located the "Convert" button - so no activity.  I want to be sure that my order was confirmed the e-mail address

  RE: ORDER NUMBER: ADO18068065

  I just bought your program Adobe Export PDF but does not - Adobe allows me to capture what PDF I want to export - but won't let me DO NOT convert the file (the window to see where the PDF export is grayed out and I can't enter anything).  Can I entered an incorrect email when I signed firstly for the export of Adobe program ([email protected] INSTEAD of Correct e-mail address: [email protected] could you go to see if the order went through because your window opens each time I try to export a PDF file to WORD asking me to buy the program Adobe export again. )

  Thanks - Pls email me at: [email protected] with your answer.  

  Hi constancew92438621,

  Make sure that you have installed the last DC of Adobe Acrobat Reader Acrobat Reader DC Learn & Support to use the service to export it to PDF help of Acrobat Reader | Export PDF to Acrobat Reader DC.

  You can also use this service online at https://cloud.acrobat.com/exportpdf

  Let me know if you have still any problem?

  Kind regards

  Nicos