Whenever I go through updates and installation of Windows 10, he returned to start

Similar Questions

• AFTER THE DOWNLOAD AND INSTALLATION OF WINDOWS, ILS UPDATES BEGIN TO SET UP, AFTER I READ UPDATES WERE NOT CONFIGURED CORRECTLY. RESTORATION OF THE CHANGES. NOT PUT OFF THE COMPUTER.

  RECENTLY RE INITIALIZED HARD DRIVE.

  You don't say if it goes back to run correctly, or you are caught in a loop.

  Read this info:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve the problem;

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• After download and installation of windows 10 upgraded, it windows restore 8 after you restart the computer

  After download and installation of windows 10 upgraded my laptop, the system restarts and shut off when I turned it on again it was restoring my old version of windows ie. Windows 8 and now when I run the wizard upgrade download everywhere again.

  Original title: 10 windows installation

  Hello

  Please contact Microsoft Community.

  I understand that you can not upgrade to Windows 10.

  I will definitely help you with this.

  I suggest you go through the links below:

  I suggest you to reset the Windows Update components. See the section manually reset the Windows Update components in the below article to reset the Windows Update components.

  https://support.Microsoft.com/en-us/KB/971058

  Registry warning: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows.

  You can download and upgrade to Windows 10 by ISO.

  Please see the following article from Microsoft to download Windows ISO 10.

  http://www.Microsoft.com/en-us/software-download/Windows10

  Reference: see the following Wiki article created by Andre Da Costa the How-to: Troubleshoot Setup and stop common mistakes during the Installation of Windows 10.

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-troubleshoot-common-Setup-and-stop-errors/324d5a5f-d658-456c-bb82-b1201f735683

  Reference: refer to the Wiki article created by Andre Da Costa on how: a list of things to do if the installation of Windows 10 fail.

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-a-list-of-things-to-do-if-Windows-10-Setup/eba3c864-d9fe-4F8E-9468-81b1f89473ed

  See also the link below:

  Refer to the suggestion given by Andre Da Costa replied on 10 April 2016:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-windows_install/unable-to-upgrade-to-Windows-10-from-Windows-81/1b2ed155-5541-43FD-809a-174fd08aad38

  Upgrade to Windows 10: FAQ

  https://support.Microsoft.com/en-us/help/12435/Windows-10-upgrade-FAQ

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• I'm doing a windows update and I get Windows could not search for new updates... errors found... Code 80244019

  I'm doing a windows update and I get Windows could not search for new updates... errors found... Code 80244019... Can someone help me please

  How to troubleshoot problems connecting to Windows Update or Microsoft Update https://support.microsoft.com/en-us/kb/818018

• Windows update: error code preventing me from to update and upgrade to Windows 10.

  Original title: error codes

  error code preventing me from to update and upgrade to windows 8.1 and Windows Update 10

  Hmm, take a look on...

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80072efe-or-80072f76

  Having problems connecting?

• Windows Update and installation issues

  Hello all and thanks in advance for your help.  I have many problems installing Windows Update as well as the impossibility to install Windows Live Messenger Update.  I guess that this combination of problems is native to Windows Installer.  I disabled all the antivirus and firewall software.  When you try to install Windows Installer 4.5, I get the error message "the following updates were not installed" fix for Windows (KB942288).  Displays the update of Windows Event Viewer 'Hotfix for Windows (KB942288)' could not be installed because of an error: 2149842978 "' (command line:""C:\Windows\system32\wusa.exe" "C:\Users\Diana\Documents\Software\Windows Installer\Windows6.0-KB942288-v2-x64.msu" ").  What attmepting to install updates, the "Preparing to install" message displays without progressing.  When you try to install windows live updates, I get a meesage that interferes with the installation a conflicting application.  I rebooted several times and run Windows Installer Cleanup without success.  Any help would be greatly appreciated.  OS is Vista Ultimate x 64.

  Hello

  Try these 1 - cleaning if possible and then rerun the installer of Windows.

  Spotlight utility Windows Installer CleanUp Utility
  http://TechNet.Microsoft.com/en-us/magazine/2008.08.UtilitySpotlight.aspx

  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  -------------------------------------------------------------

  Run these to see if they can clearly until the update installs.

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• MY FONT SIZE HAS CHANGED WITH THE LAST UPDATE AND I CAN'T SEEM TO RETURN TO NORMAL.

  WITH THE LAST UPDATE OF THE FONT SIZE CHANGED ON MY EMAIL ACCOUNTS AND PAGES OF MY WORK.  IT OF SMALL, I CAN'T READ IT EVEN WITH GLASSES ON. IT IS MAGNIFIED 150 TIMES.  MY COMPANY, HE CHANGED THE RESOLUTION WHICH HAS CHANGED MY SIZES OF ICONS, BUT DOESN'T HAVE ANYTHING DONE TO MY FONT SIZES.  THE HAD ME ALSO DO SOMETHING WITH MICROSOFT THAT DOESN'T WORK ANYMORE.  SO THEY HAD ME CONTACT MICROSOFT WHO CAN HELP ME BECAUSE I CAN'T AFFORD TO PAY TO GET ANSWERS TO MY QUESTIONS.  I AM ALREADY 3 HOURS LATE FOR WORK IN TRYING TO SOLVE THIS PROBLEM.  CAN SOMEONE OUT THERE HELP ME?

  Hi ELLA SMITH (KELLY).

   

  Welcome to the Microsoft community forums. Please post your query and giving me the opportunity to help you.

  I'm sorry for the inconvenience caused.

  I will guide you on the issue of the police.

  (1) you are on a domain network?

  (2) the Windows updates were installed?

  (3) what happens when you try to change the font sizes, you get an error message?

  I suggest you refer to the link to verify that Windows update have been installed.

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Method 1:

  You can check follow them the links below, if that helps:

  (1) change the Windows fonts
  

  http://windowshelp.Microsoft.com/Windows/en-in/help/bdc9d003-777b-4B1E-9664-2957f50870bd1033.mspx

  (2) fonts: frequently asked questions
  
  http://windowshelp.Microsoft.com/Windows/en-in/help/0caf0419-6990-45de-8D71-67f14a3ae4c71033.mspx

  (3) how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  
  http://support.Microsoft.com/default.aspx/KB/936212

  Method2:

  un) make system restore, choose the date where the screen resolution and the fonts were ok as your restore point.

  (b) when these updates come to install again, do only ONE AT A TIME. After each installation, check if the screen is ok, and then next update and so on.

  c) in this way, you'll be able to simply update is the cause of this problem.

  If the problem persists feel free to post us. We're here to help.

  Thank you.

• Problems with windows update and upgrade to Windows 10

  OS: Windows 7 Ultimate 64-bit Service Pack 1

  CPU: Intel i5 24 GB ram

  Product is enabled

  1. I'm unable to install the last update of security for Silverlight.  I tried to uninstall the application, but cannot.

  I am unable to run any apps or apps problems fixit.

  They have all the same details:

  Unknown package ID

  Path: unknown

  Error code: Ox80070003

  Source: temporary files

  I doubled the verification and services:

  Background

  Windows Update

  CPP

  Windows module

  are started

  I down loaded the tool for creating Windows Media and it failed after reaching 100%

  I downloaded several programs fixit, but none works

  Where should I go from here?

  After trying several things, I finally got 10 for the windows installation.

  I had to create a new admin account and did all the updates from there.

  Thanks for your help

• The upgrade of equipment and installation of windows on Equium M40X

  Hi guys,.

  I bought a M40X-189 in 2005, which came with win XP Home Edition on a toshiba CD.

  I don't know if this is common worldwide or for different models; but my installation CD verifies only that it is in the computer on which it was purchased with and then coppies an image disk pre-installed and pre-activated windows XP on the computer. I love what it means I don't have to use the serial key and I am not limited to 3 activations on my serial key.

  The only complaint is that when I needed a CD of windows for fixing the computer (starting in recovery mode), this CD did not work and I had to download a pirated copy of XP home (I only it used once to start in recovery mode, and I never installed windows, so I hope that's ok).

  Anyway, the computer comes with a Hitachi HTS541060G9AT00 hard drive (60 GB, ATA - 6, 5400 RPM, 8 MB cache, 12ms search) and I wanted to upgrate to a 250 GB western digital drive with the same cache, research, interface and rpm.

  I was wondering will the CD still be able to install windows or he thinks that it is not the computer, it came with and therefore not let me install?

  Hello

  If you want to install Windows XP using not the recovery disc, then you will have to enter the serial on the right key.
  If you don t have a serial key on the right then you will not be able to complete the installation of the OS.

  With regard to upgrading the HARD drive:
  I know you can use a 120 GB 2.5 IDE HDD for sure, but I don't very well if the 250 GB would be recognized due to the LBA 24 bit m.

  I recommend you to choose a 120 GB HARD drive

• There was an error Code Ox800710D9 when you try to update and install the Windows SP2

  I can't update Windows XP SP2 due to an Ox800710D9 error code.

  Hi frankhunt,

  Try these steps and check the result.
  Step 1: Stop the Cryptographic Service
  a. Click Start, click Run, type services.msc in the Open box and then click OK.
  b. in the Services dialog box, click Cryptographic Services, and then click Properties.
  c. in the cryptographic services properties dialog box, click the general tab and then click on stop.
  Option Service status changes to Stopped.

  Step 2: Remove the Windows Update.log files
  a. Click Start, click my computer and then double-click the hard disk where Windows XP is installed. For example, double-click the C drive.
  b. click the Folders box, click the Windows folder and then click the System32 folder.
  Note If you receive the following message appears, click Show the contents of this folder:
  "These files are hidden.
  This folder contains files that keeps your system works correctly.
  You should not change its content. »
  c. click on / open the CatRoot2 folder.
  d. remove the Edbxxxxx.log file.
  Note: In this step, xxxxx is a placeholder that can represent any combination of letters and numbers, numbers or letters.
  e. Click Start, click my computer and then double-click the hard disk where Windows XP is installed. For example, double-click the C drive.
  f. click the Folders box, click the Windows folder and then click the Security folder.
  Delete the file Edbxxxxx.log.
  Note: In this step, xxxxx is a placeholder that can represent any combination of letters and numbers, numbers or letters.

  Step 3: Start the Cryptographic Service
  a. Click Start, click Run, type services.msc in the Open box and then click OK.
  b. in the Services dialog box, click Cryptographic Services, and then click Properties.
  c. in the cryptographic services properties dialog box, click the general tab and then click Start.
  The service status option changes Started.

  Step 4: Install the service pack
  a. visit the Windows Update Web site to update the computer to Windows XP SP2: http://windowsupdate.microsoft.com
  b. install the update and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update and download sp2 - Windows Service does not work

  original title: update and sp2 download

  tried CK for updates upgd to said sp2 windows service is not running what it means and how to fix

  Dawn,

  Suggest that you first spread malware as the cause of the problem by following these steps:

  (1) have your system scanned by the antivirus/security suite installed.
  (2) run this tool from Kaspersky: how to remove malware belonging to the family Rootkit.Win32.TDSS http://support.kaspersky.com/viruses/solutions?qid=208280684>

  If no malware has been detected, there's a Fixit on this page which will reset the Windows Update components:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058>

  Suggest you download and Save it. Then, close all the open programs and web browsers.
  Run Microsoft Fixit50202.msi and choose its default mode.
  After that he finished the race, see if the return code is displayed again when looking for updates.

  If not, then run the Fixit once more and choose his Aggressive mode.
  Restart once it is finished and see if the return code always appears when the updates.

  IF malware is detected, then please post if it has been removed and that the specific name of what has been detected.

  Courtesy: Steve Wechsler MS - MVP

  06/19 / 1110:11: 46 pm

• Dell inspiron 14/14R Touch - backup and recovery 1.5 not updated and I have windows 8.1?

  Hello

  I have a laptop dell inspiron 14R/14 touch screen. I bought recently. It came with windows 8, and I have upgraded to windows 8.1. Now when I run the backup program and recovery dell he says there is a compatibility issue and I need to reinstall it. Currently, the installed version is 1.5.0.0. However some other dell sites, it is said that compatible with windows 8.1 version is like 1.6.x.x.

  If I open the software and click Update, it says no updates are available. If I try to manually download the exe and run it, it says I need to uninstall the current version first. I don't want to do it and then find out that somehow, I can not install the new version...

  Anyone know what is happening and how this can be fixed?

  Thank you

  Here are the pages showing this:

  Link 1:

  http://www.Dell.com/support/troubleshooting/ca/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=627550&DGC=SM&CID=266887&lid=4966974

  Article ID: 627550

  Publication date: 2013-10-17

  ID of the journal: 39c4aa32-ce0b-4a03-88b1-d406c6cbb5c4

  Link 2:

  http://www.dellbackupandrecovery.com/en-us/index.html

  We have identified the cause of the issue of the update and corrected.  Please try to update the program again and let me know if it works.  The update will take some time to complete, especially on Win 8.1 upgrade systems, then let it run for a while (30 minutes max).

  Thank you

• Windows Update don't load/Windows Media Player does not start

  On XP Home Edition SP3, the last week I not was able to get the Windows Update page to load.  There is no error message, IE8 seems to think that the loading of the page and there's code, but a blank white page in IE8. I discovered this problem after finding that Windows Media Player wouldn't start - again without error message.  I look in Task Manager, the wmplayer.exe process runs for a few seconds, then disappears.

  I have run a number of analyses of malware using Avira Free edition (now uninstalled), Spybot S & D, MalwareBytes Antimalware, Windows Defender, and Microsoft Security Essentials with no result or change.

  I reset IE8 to its default settings and now find that I can't choose a search engine or view other pages on the Microsoft support site, such as http://support.microsoft.com/oas/default.aspx?gprid=assistance--il displays only the banner from the top on a white page. (I write this using Chrome).

  Other posts on the forum about the update or Media Player starts does not seem to be on other versions of Windows, and I've not found anything about problems at a time.

  Someone else met this kind of problem?

  Thank you

  KB2416400 only is installed, among those which you have listed

  You are see the effects of an infection hijackware, very probably aggravated by a rootkit infection W32/Alureon-Variant. And I can say that the computer is infected since early August of 2010,at least.

  OPTION A: Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  OPTION B (recommended in your case): See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  Wish I had better news for you.  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Installation of Windows XP "Repair" returning parameters/files

  [U] [B] WALL OF TEXT WARNING [/ B] [/ U]

  A few days ago, my computer acted upward and gave a Blue Screen of Death, when starting from a Youtube video. Usually, I get the BSOD just crash my computer and everything is fine after that. This time the computer froze on the home screen and then gave a BSOD again and remained in this loop. Then I tried to start the computer in safe mode to do a system restore, is the restoration of each date of this week, no luck, gave me the same results.

  The loading screen and watched welcome glitch-ey, the loading screen had vertical black lines running through it, the Welcome screen is frozen in a white checkered pattern.

  My last resort was to 'fix' Windows Xp with the Windows XP disc it as usual. I did it and everything was fine, except that I got a new user account with zero parameters now even if the old user account files (except some desktop shortcuts have disappeared, which is very good) are still there. I then did the instructions of "appropriating a file" of:
  [url] http://support.microsoft.com/default.aspx?scid=kb;en-us;308421&Product=winxp [url].

  Now I have control of the files, but before I have my hardrive not more with the 100 GB file moves from the wreck, I need answers to the questions.
  1 move all the files to the new account will work or do I need to fix roads shortened to c:/program files after that?
  2. I noticed the "repaired" computer doesn't even have Java in this regard, a ready internet connection setting and is not able to run any games-Will install all my old drivers, java + other settings for the router disc work?
  3 are the only means of recovery previous state (files and settings) my computer 1 & 2 question or is there a simple copy / paste method?

  Thank you if you've read this! Thanks in advance.

  Hi Thatyou,

  Since you have your previous user account files available, you can read the following article to set up the new user account.

  How to create and configure user accounts in Windows XP

  Yes, reinstalled the drivers and other applications should help you to use the computer as we have.

  I would say that you reinstall the drivers and programs. There is no way that you expect.

• Start the UCM 11 g and IBR on Windows Server 2008 when you start the server

  Hello
  
  I installed ucm 11g with an inbound refinery on a 64-bit windows server 2008. The AAU and the bovine infectious rhinotraecheitis are supposed to start automatically after the server is running.
  
  1. I put the startWeblogic.cmd and the startNodeManager.cmd in the directory Autostartup. The weblogic and the nodemanager are starting very well in a denial of service console.
  2. I tried to start the University Complutense of Madrid with the following startManagedWeblogic of the UCM_Server1 command. Then he asks me a username and password and then, he throws a java exception and the UCM_Server1 will not be started.
  
  The current situation is that the weblogic and nodemanager starts automatically and the UCM_Server1 and IBR_Server1 must be started manually.
  
  What is the usual way to start the AAU automatically? Can we establish some Windows Services?
  
  Greetings
  Brahim

  The best way is probably a Windows Service. Here's the Oracle documentation on how to do it.
  http://download.Oracle.com/docs/CD/E12840_01/WLS/docs103/server_start/WinService.html

  You can also try the Windows Task Scheduler. I heard that this works well (even if a Windows Service would be better).
  http://www.windowsnetworking.com/articles_tutorials/working-Windows-Server-2008-Task-Scheduler-part1.html

  This post shows how to store your WebLogic login information encrypted on the disk.
  http://corecontentonly.com/2010/07/27/start-WebLogic-managed-server-without-username-and-password/

  Jonathan
  http://www.corecontentonly.com