Whenever I plug my iPhone into a USB port on my Toshiba laptop, I get a message «overload the hub»
Whenever I plug my iPhone into a USB port on my Toshiba laptop, I get a message «overload the hub» I tried to reset the ports using the Device Manager, but it does not work. Can someone help me solve this problem?
This means that the phone ends so much power that the ports are closed to avoid damage to your laptop. Get a USB hub powered (the one that plugs into your computer and comes with an adapter to plug into the wall) to provide more power, or less plug items on your USB ports at the same time.
Tags: Windows
Similar Questions
-
Windows Media Player doesn't work when I plug my MP3 player or flash drive into any USB port.
Victorinox original title: Media player closes on MP3 device.
Recently WMP gives me the message "a problem has been...". "When I plug my MP3 player or flash drive into any USB port. Then it crashes and I have to close it manually. Any ideas?
Hello
1. have you done any hardware changes or software on your computer before this problem?
2. what version of Windows Media Player do you use?
3. What is the full error message that you receive?
I suggest you to rebuild the database from the Windows Media Player library. Subsequently, check if the problem persists:
If you use Windows Media Player 11, refer to this link: you cannot view, add, or delete items in the library of Windows Media Player 11
Hope the helps of information.
-
Turning on the PC with a wireless receiver (Microsoft model 1119) plugged to any USB port causes Windows Vista does not load. Turn off the PC, unplug the receiver, put the machine, loads without problem. Once windows is loaded, reconnect the receiver wireless Microsoft and less than a minute, the keyboard and the Microsoft wireless mouse works perfectly. Device Manager does not take into account conflict of devices.
Hello
Thank you for keeping us posted.
Check if the hard disk has been set as the first boot device in the boot coastal in Input/Ouput order Basic (BIOS). Otherwise, you can set the hard drive as the first boot device and check.
Consult the manual of the manufacturer, to do the same thing.
Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.
Hope this information helps.
-
Flash drive (memory Sticks) into any USB port of my computer is unable to display.
When I insert a flash drive (memory stick) into any USB port on my computer that the information stick memory does not appear on my screen, so I'm unable to access or open the content of sticks of memory.
Following the advice of medions I restored my computer to its factory settings. So far, which seems to have cured all the defects.
Once more can I sincerely offer my thanks for your attention and valuable adviceRobin Jones. -
As above. I checked the USB port and it is connected.
Original title: printer problem. After changing the cartridge, I get a message that the USB cable is not connected?
Hello
1. you receive an error message/code when you try to print?
2. What is the serial number and model of the printer?
Follow the steps.
Method 1
Run the hardware and devices Troubleshooter
This utility checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-TroubleshooterAlso run convenience store Print that would help us diagnose the problem better
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterMethod 2
(a) check the physical connection of the printer and make sure that the USB cable is properly plugged.
(b) connect the printer to a different USB port and check if it helps.
(c) check the on another computer.
Method 3
Run the fix - it tool from the link.
Diagnose and automatically fix problems printing and printer http://support.Microsoft.com/mats/printing_problems/
Method 4
If the previous step fails, follow the steps described in the following link:
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Let us know if it helps. -
I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?
Hi Kerrkid90,
Welcome to the Microsoft Answers Community Forum site!
To launch the browser, I want to suggest you to log on as an administrator in 1. Download the game
2. run the setup.exe file
3. right-click on it and run as administrator.
If it fails, suggest to run the Windows Installer Cleanup utility by visiting the following link:
http://support.Microsoft.com/kb/290301
In the case if the above methods fail, you can also contact last chaos community to help you fix this problem:
http://forums.aeriagames.com/?f=6
I hope this helps!
Thank you best regards &,.
Calogero - Microsoft technical support.
Visit our Microsoft answers feedback Forum
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think -
Whenever I try to download a file, I get a message that the internet explore has encountered a problem and need to close. Can someone explain why this is?
What Service Pack for XP are you running? You use Internet Explorer 7 or 8? If so, you can try this article to see if it solves your problem:
"How to reset Internet Explorer settings"
<>http://support.Microsoft.com/kb/923737 >HTH,
JW -
Help! Whenever I send an email from my Hotmail account I get a message that the WebKit2WebProcess, exe has stopped working and the program closes and opens again, then - why? Maybe what I need to do, it is to disable and depend on my protection to protect my computer from viruses. In one, even if this is very frustrating!
Hello
I'm sorry, but we cannot help with hotmail problems in these forums in response to vista
Please repost your question in hotmail in the hotmail link below forums
http://windowslivehelp.com/product.aspx?ProductID=1
ForumsConsult with Microsoft Certified Solutions____________________________________________For the different Forums for Windows Live Applications, select the link belowWelcome to Windows Live Solution Center -
My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.
Hello
1 I want to erase the General corruption and repair/replace damaged/missing system files:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html============================================
After the foregoing: a Fixit for Hibernate
How can I enable hibernation on my Windows Vista computer?
http://support.Microsoft.com/default.aspx/KB/929658How to reactivate the lack of Hibernate Option in Windows Vista?
http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/-------------------------------------------
More if necessary:
Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.
Troubleshooting Windows Vista sleep and extended
http://www.computerperformance.co.UK/Vista/vista_hibernate.htmHow to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686May need to reset all to default power settings and then place back as you prefer.
How to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.htmlHow to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.htmlPanel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
type of hibernation - see turn Hibernate on / offMay need to reset all to default power settings and then place back as you prefer.
I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
My WD 3 USB drive does not work in the 3 USB Ports on my Lenovo W530 lap. But work in the regular ports. What can I do to fix this?
Do not use windows update for drivers.
Update your drivers Lenovo support and see if that helps
If the lenovo is new, you can contact Lenovo support to asertain why usb3 ports apparently do not work
-
Whenever I try to download anything on my laptop, I get a message saying that a virus has been detected and it is deleted. So I can't download files or even virus scans. Help, please...
Hello
Read the answer to your problem through The ball in this thread link.
"I get the error message"xxxxx.xxx"" contains a virus and has been eliminated ' downloads... on all software updates from microsoft ".
See you soon.
-
Why the pictures open instead of iTunes when I plug my iPhone into the USB?
Today, I upgraded to OS X El Capitan 10.11.2. I also updated my iPhone 6 p to iOS 9.2 and updated iTunes to 12.3.2.35. Now when I plug my iPhone on the port USB, Photos (1.3) opens automatically instead of iTunes. I tried to restart, but that solves nothing. How can I fix this problem?
When the picture opens there is a box to uncheck it to prevent it from happening again.
-
E280 plugged into a USB port may be bad and it fried my sansa?
Hello everyone, this is perhaps my last posting! I am so sad and upset: I just plugged my V1 e280 on a friends computer using a sandisk connector cable I got free on a freebox (variable n ° 1) and plugged into the front USB port (variable n ° 2); He turns, and then now it won't turn at ALL. I opened the back and took out the battery, and it was VERY HOT. I messed up with the battery for a while and it won't always turn. Then I plugged it in USB computer port (my friend just told me, "those before does not work") and still it won't turn. HOWEVER, a minute or two later, always connected, the BLUE RING OF DEATH on and is always turned on, ten minutes later while the screen is still blank, until the unit is now so hot that they are almost HOT. I put it in the refrigerator.
So. That's happened? I'm f * cked? Whose heads will roll for this disaster? PLEASE HELP I CAN'T UNDERSTAND THIS.
Thank you very much
YES, I'M SURE IT IS a SANSA CABLE, it says "SanDisk" on it and is similar to my own cable. What diff he would do anyway, the device is F - ed. Also, it turns out that it was the old cable and not the other, although a big deal. Any advice for me?
-
my computer crashes when I plug in my memory stick webcam into a USB port
I just brought a logitech C100 webcam and a tick of memoery EMTEC 4 GB two USB. as soon as I Plug one of them in ports USB of the computer crashes with blue screen horrible?
Hi Keith,
You are able to use the computer USB ports normally when you connect to another (other than the one you mentioned) key-USB/Flash USB? Try to update the drivers for the chipset of your computer. Also provide more information on your computer on its brand, model and if it has been recently formatted.
I hope this helps.
-
Windows 7 compatibility page shows pny 4 GB attached mini usb 2.0 drive compatible with no additional downloads necessary. PNY show instructions for loading manually driver for win 98 only. Download driver I tried the detective, no help. all of the suggestions. try to use the usb for quicken deluxe 2010 backup instead of cd
Hello
For this USB drivers should be installed automatically by Windows 7, when you connect the player to what messages we get as appropriate, if you open the computer to open the drive it appears as a removable device?
If not and with only the connected USB device opened upward Device Manager (Manager type of devices in the area start search to quickly find) then open the USB Buss controllers branch, click it + and looking for USB Mass Storage Device righ click on uninstall, then unplug and plug in the USB pen and see if Windows loads the drivers ok.
If not there yet with the USB pen connected open disk management and check if the USB key is listed as a removable drive, it may simply need to change its drive letter, change it to X, Y or Z for example.
Some info on the disc switch letters HERE
There may be a crisis today... my schedule is already full
Maybe you are looking for
-
How can I remove the address header that appears under display the Inbox, and just above the email being viewedHeader, subject, and on the far right, the time of e-mail and other button optionsThe header takes up valuable space to read e-mails
-
Multi device Synch AO series via RTSI
I have two analog output AO Series devices connected via the RTSI. I've defined the RTSI cable in MAX and added the two planks. I have trouble getting the slave to use the sample clock master. According to "Timing and synchronization features of NOR-
-
ARC mouse doesn't respond better after battery change
I used my Arc mouse for about 3-4 months. I replaced the batteries a couple of times during that period and had to be replaced again this morning. The LED on the device still lights up green to indicate that it has a complete autonomy, and windows
-
Cisco EX90: Unable to see the presentation of the end
Hi all We have currently enrolled in CUCM EX90. Question: Scenario of 1 when the EX90 will launch to share the presentation, from the other side, they were able to see the presentation that we shared. but in the far endpoint if they will start to sha
-
SOA email notification when Chief rejects the task request.
Hi allWe have E-mail SOA trip when the manager approves / denies the request he received notifications ask an end user or a subordinate.We use composite Manager recipient OOTB SOA for it. We have configured Notifications in the ApprovalTask.task in t