Whenever I restart my computer, I get an error msg. It reads "Top line" Rundll... Error loading C:\WINDOWS\uyuletuzuho. DLL

Whenever I restart my computer, I get an error msg. It reads "Top line" Rundll... Error loading C:\WINDOWS\uyuletuzuho. DLL is not found. Someone knows what and how to find it to download on my computer.

Whenever I restart my computer, I get an error msg. It reads "Top line" Rundll... Error loading C:\WINDOWS\uyuletuzuho. DLL is not found. Someone knows what and how to find it to download on my computer.

Assuming that the spelling of the missing dll file is correct your computer is probably infected by malicious software. Click HERE, download, install, update and perform a quick scan with Malwarebytes. Once the completed scan click HERE, download and run a quick scan with SuperAntiSpyware Portable.

Tags: Windows

Similar Questions

  • Whenever I start my computer, a message appears: "error loading C:\WINDOWS\ufidehipen.dll. The specified module could not be found. Can't fix it!

    Whenever I start my computer, a message appears:

    "Error loading C;\WINDOWS\ufidehipen.dll the specified module is not found."

    Once the message is erased my computer works normally.  Ironically received a hoax call, claiming they were from Microsoft Support.  I did not claim.  Have security of Norton 360.  A run 'getcleaner' and ' getmalwarebytes.  A ran all the Microsoft diagnostic tools and still have the same problem.
    If anyone can help with a solution to my computer problem?

    Hi Caspwilson,

    Not answering all calls for support!

    Download CCleaner from www.piriform.com/ccleaner and scan your system.

    I hope this helps.

  • I get an error loading C: Windows\ifapilidarexowex.dll rundll. How can I solve this problem?

    I have a laptop Gateway running Windows XP Pro. When you connect to any account, I get an error loading C: Windows \ifapilidarexowex.dll rundll. I click on the OK button and the system starts and seems to work fine. It is an annoyance and should be fixed. I don't know how.

    C: Windows\ifapilidarexowex.dll<-- this="" is="" a="" malware="">

    As already mentioned by the first poster, the loading of the module above error is because the point of loading in the registry is still intact and trying to load a file that no longer exist. (A malware dll) file has been deleted either by your resident anti-virus or other scanners, but left intact registry value where the error.

    What needs to be done, is either operate scanners who clean up redundant reg for example, MalwareBytes entries or other scanners or run other tools such as HijacThis and tick the corresponding section of fault start and click on the "Fix checked" button. hijackThis will then remove the redundant value and error loading stops. It is easier to use a tool, so you don't have to worry about editing the registry.
    You could also disable the offending boot entry via msconfig > startup if it shows up there.

    Below is an example of an error in loading a module of malware that has been deleted by the antivirus, but has not removed the corresponding registry value.
    04 entry in the log from hijackthis should look like the example below.

    "Error loading c:\windows\system32\ravkgmff.dll the specified module is not found."

    O4 - HKLM\... \Run: [GPLv3] rundll32.exe "C:\WINDOWS\system32\ravkgmff.dll",realset"

    http://free.antivirus.com/HijackThis/

  • whenever I restart my computer, I get a message that says ASUS Express Gate Installation was incomplete, not sure what that means?

    I recently bought a computer is restored to nine that I has a 232 GB HDD (which was my drive c :) in it, so I had technicians install my 500 GB HDD (this is my f) also for the extra space.)  I now have the computer startup problems and when I was finally able to she is trying to load my f as my c: drive and I don't know what happened.  Also whenever I restart my computer, I get a message that says ASUS Express Gate Installation was incomplete, not sure what that means?  can someone help me?

    Original title: hard drives

    ASUS Express Gate installation to install Express Gate on your computer mount the DVD media into the optical drive. The drivers tab is displayed if your computer has enabled the Autorun feature. . 2. click on the utilities, tab, then on ASUS Express Gate Installer.3.Select the installation language and click. Ok. 4. the InstallShield Wizard for Express Gate appears. Click next to continue. 5. Select the disk volume target for you to install Express Gate. If you have several volumes and operating system installed on your hard drive, it is recommended to install Express Gate on Volume C click next to continue. 6 follow the instructions on the screen to complete the installation. Partition drive letter can someone have assigned wrong Solution of dough will be if you have Windows disk installation and reinstall windows on the Page of the score make Partition

  • When I restart my computer, I get this message error loading C:\windows\pxtdmap.dll, what should I do?

    Error loading C:\windows\pxtdmap.dll, what should I do?

    Hi Nancy,.

    The error message says anything else? Just, based on

    "C:\windows\pxtdmap.dll", I am unable to find a possible solution.

    The error message contains more information or could look you in your system event viewer to see if there is a more detailed error message there?
    It would also be possible to use the system restore utility to restore your computer to a time where you did not receive this error?
  • As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

    Original title: Rundll error help

    As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
    . There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that your system has or has had an infection, follow up with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs at:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.
  • Whenever I reboot I get the following message: error loading C:\windows\claprv.dll

    Whenever I reboot I get the following message:

    Error loading C:\windows\claprv.dll

    the specified module could not be found

    What does that mean?  The only thing that I found online, it is that it can be associated with some malware?

    Any ideas?

    Hello, Rojo97,

    You have something to do with skiing?  This site uses claprv.htm.  You will get a 404 error page not found but the site is active.

    http://www.Sloski.SI/resources/files/PDF/alpsko-smucanje/04-05/FIS/alp_claprv.htm

    Have you added new software to your system recently?

    Download Microsoft malicious software removal tool run a complete analysis

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  • When computer booting XP, get "error loading C:\WINDOWS\sversrit.dll".

    Hi, can someone help me please. I get the message "Error loading C:\WINDOWS\sversrit.dll" when windows starts. I think it might have something to do with Outlook Express, because around the same time I started having problems with forwarding of emails with attachments. Thank you.

    A Google search for the name of the file is without success.

    When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

    First of all, download, install, update and run both of these free analysis tools:

    MalwareBytes AntiMalware
    SUPERAntiSpyware

    Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

    If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

    Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

  • When turned on the computer it says - Error loading C:\WINDOWS\aluzonah.dll - the specific module could not be found

    When turned on the computer it says - Error loading C:\WINDOWS\aluzonah.dll - specific module is not found - the computer seems to work very well however.

    When turned on the computer it says - Error loading C:\WINDOWS\aluzonah.dll - specific module is not found - the computer seems to work very well however.

    A Google search for this returned no success other than your own message.  This suggests that the file refers to malicious software.

    You have a recent version of an antivirus with a current subscription application?  Have never leave you the subscription expires?

    Startup like these messages can occur if your antimalware application has deleted the payload real malware but has failed to clean up the start of the call.

    First download, install, update and run the following applications of malware free 2 the possibility that one or the other will detect and remove these remains (as well as anything else that your original scan could not detect):

    Malwarebytes

    SUPERAntiSpyware

    If these two applications running is not the message disappears, you will need to know where the call to the missing dll file is now done.  The best tool for this is AutoRuns:http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx the main problem with the help of AutoRuns is that he finds the startup items as much as it can be a little overwhelming. One of the good features of AutoRuns is that you can prevent an element of commissioning by unchecking the box, but if you decide that you really want to start, just re-check the box.  Once you are sure that you will never need of the item to start, remove it.

    Typical advice is to check the logon tab, but because the now-absent file is a dll, it is not likely to appear online in the logon tab.  Yet, take a look at the connection tab and if aluzonah.dll is there, or if there is a line of starting an application of suspect search, a Google search suggests is malware, uncheck the box and restart.  If the entry is far, re - run AutoRuns and remove the line.

    The next place to look is the Winlogon tab, which should have little, or no, entries.

    If you have not yet found the wrong entry, click the all tab, click the top row and then click on file > find and search for aluzonah.dll.  If you find an instance, uncheck the box and then manually move the selection on the following bottom line then press F3 to "search again".

  • I get "RUNDLL error loading C\Windows\arelasiwitafabiz.dll." when I start my system.

    Original title: my first RUNDLL error.

    At startup, there is a small window on my desktop saying RUNDLL error loading C\Windows\arelasiwitafabiz.dll.

    It disappears if I click OK, but always returns to the start. I downloaded a couple of registry cleaners; It is on the advice of the other forums, being a registry patrol, but I later read this was a suspicious program, so I removed it. In fact it seems to be a large number of suspects in programs offering assistance, so now don't know what to do. Finally what effect an error RUNDLL has on a computer. Any help please

    The 10 landfills, three were from 2009 so I don't check those out.  Four were on 8 June, two of 14 may, and one from May 17.

    Finding bugs were IRQL_NOT_LESS_OR_EQUAL (4) or INVALID_WORK_QUEUE_ITEM (3).  INVALID_WORK_QUEUE_ITEM bugs were all attributable to the sunkfilt.sys on December 8, 2004 - the "USB driver for the 6 in 1 media card reader" (your system is a HP?).  The suggestion would be to update the driver, or off the device if you do not use.  Finding bugs IRQL_NOT_LESS_OR_EQUAL were of same and all inconclusive - not irrefutable.

    I would say that running chkdsk, and if you have a disk XP,SFC/scannow [Moreover, this], starting with.

  • where can I get the update from windows to windows xp professional sp3 - error loading C:/Windows/oranbd.dll

    Windows Update is not installed, when I turn compurer I get error loading error messages c:/windows/oranbd.dll and said ca can not be found

    also is runing very slow what can I do to fix

    Hi hugozamora,

    ·         Do you receive the exact error message?

    ·         When exactly do you receive the error? Is the Windows startup?

    ·         Do you receive the updates of Windows-related messages?

    Method 1: You can visit the following Web site to install the latest Windows updates for your computer.

    Microsoft Windows Update

    Method 2: Start the computer in safe mode and see if you receive the error message you mentioned. Report of the results.

    See also:

    Increase the speed of the PC: optimize your computer, help your PC run faster

    Respond with more information so that we can help you best.

  • why I get this error Rundell C:\WINDOWS\ivoqadir.dll

    My friend has a Rundell C:\WINDOWS\ivoqadir.dll windows error cannot find C:\WINDOWS\ivoqadir.dll or similar, whenever he starts his pc (Windows XP 32-bit)

    Any suggestions how to fix this? Although everything seems to work fine!

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
    . There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that your system has or has had an infection, follow up with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
  • When I run the program I get a message "error loading C:\windows\dhax40.dll the specified module is not found.

    I have Windows XP service pack 3.

    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.

    A Google search on the name of the file means no "hits" which makes things even more suspicious.

    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
    .  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it
    .  Autoruns shall display the same information however.
    Given that you had or have an infection, followed with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
  • Whenever I restart my computer, I get the following message: PrinterSelect.exe has stopped working. Windows can check online for a solution to the problem.

    Description:
    Stopped working

    Signature of the problem:
    Problem event name: CLR20r3
    Signature of the problem 01: printerselect.exe
    Signature of the problem 02: 1.0.2453.22313
    Signature of the problem 03: 450fe152
    Signature of the problem 04: mscorlib
    Signature of the problem 05: 2.0.0.0
    Signature of the 06 problem: 4a7cd8f7
    Signature of the problem 07: e4
    Signature of the 08:10 problem
    Signature of the problem 09: System.Security.Security
    The system version: 6.0.6001.2.1.0.768.3
    Locale ID: 1033

    To install a new all-in-one, I'm afraid that I will continue to have problems and the same error message.  Any help would be appreciated.

    Hi dtwes,

    try to stop the program from running at startup:

    Tutorial: http://www.vista4beginners.com/System-Configuration-Utility
    deselect 'printerselect.exe '.

    I hope this helps.

  • Whenever I start my computer I get an error message "" cannot find the file M3PLUGIN. "." DLL. How can I solve this. ___

    This happened only after I deleted my temporary files, but does not see why this file would have been affected

    The file is part of the malware MyWebSearch toolbar. Either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup.

    Because you had a piece of malware, the chances are too high you had others. It would be a good idea to scan. I recommend to download and install MalwareBytes' anti-malware (MBAM) from http://www.malwarebytes.org . The program is free. (There is a paid version, but you don't need to buy it to remove the malware).

    Manage startup:

    (for XP) Start > run > msconfig [Enter]

    This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

    How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

    The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

Maybe you are looking for

  • memory on macbook pro

    I have a MacBook Pro of the retina with 8 GB of memory. Found two files that appear to consume all the memory when I bootup. They are called "Installer". I can't delete them. How can I get out of my system?

  • Is my site Popup does not work on the Android browser

    I am the owner of a website IE http://www.stdtestingorlando.net . The Web site is using a responsive model. I just installed a popup javascript based on my site. I just noticed that it is works well on desktop computers, but does not appear on the an

  • Error message 'Missing file' on pictures of shared data flow?

    I was added to a stream shared with hundreds of photos by a friend. The photos appear on my macbook, but when I try to message these pictures for myself, post them on facebook or doing something else, I get a "missing file" error that drives me to ge

  • "This program requires a codec missing Windows"

    When I try to open a file in windows media player, I get this error message. My drivers are up to date.

  • What is the best video card for a Dell Optiplex GX620.

    Hello! I have a Dell Optiplex GX620 and after many trials with glitches in video games, I am told that I need to update my video card. What is a good which corresponds to my mini-tower and a good price? Thanks for your help! Puppetguy