Whenever I run Firefox, it appears an error message indicating "Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist." Contact the author to this problem. »

Similar Questions

• Error message "a program could not start. Please try again"when I try to send Remote Assistance invitation.

  original title: Remote Assistance does not work

  Win XP PRO SP3

  Question #1:

  When you try to send an invitation to support remote I get an error message "a program could not start. Please try again. »

  This error pops up before even the invitation is created, so the problem is with the creation of the invitation and not with problems of subsequent connection between the computers. The invitation is never created. This happens on several computers I own or maintain.

  The event log records all errors when this happens.

  I searched for hours all over the Internet and a lot of people seem to have this problem. Some it is resolved, for the most part, they needed to start a service, but the cause of their problem is not the same as mine.

  After restarting the computer, sometimes the invitation creation works fine.

  Other DIY suggests when the problem appears it can be corrected by running the command 'sessmgr-service' in a command line window. After executing this line it seems that the problem is resolved.

  What I find disconcerting is that Sessmgr.exe is the service Remote Desktop Help Session Manager that was already running, but for some unknown reason runs this line made work again right. I'll have to experiment more.

  Is it possible to debug and fix this?

  Question #2:

  When I can finally send an invitation it will work on the local network but not on the Internet. I can't connect to the Internet.

  I'm looking at the structure and the content of the invitation to http://msdn.microsoft.com/en-us/library/cc240167(v=prot.10).aspx
  In the example given here, as in the generated invitations in my experiences, the invitation contains only the LAN IP addresses (with port number) but no global address.
  RCTICKET =... 192.168.1.65:3389; Jeff: 3389

  How the computer expert is supposed to understand the global address to which it should connect is a mystery to me.

  How can I get Remote Assistance to work on the Internet?

  Hello

  The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• Following error message if poster "could not load C:Users/Owner/Locals~1/temp\msavvzczh.exe.

  Following error message is displayed "could not load C:Users/Owner/Locals~1/temp\msavvzczh.exe how to remove the registry."

  Remove it from startup.  Start/Run, type msconfig. Delete it under the Startup tab. Its probably malware

• My photosmart HP more b209a displays an error message Oxc19a0020 how can I solve this problem?

  I tried turning the printer and then turn it on again.
  I tried to unplug the power cord at the back of the printer and the decision-making, wait 15 seconds then in him plugging back in.
  I tried to clean the print head and put in new ink cartridges.

  [Moved from comments]

  HI Margaret,.

  Welcome to the Microsoft community.

  What version of Windows is installed on the computer?

  You can read this article to check if the problem is resolved.

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please select the operating system you are using on the upper right side of the screen and follow the steps.

  The error code you provided is an error of HP. I would also say that you post your question on the HP support forum as well.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3777182&LC=en&cc=us&DLC=en

  Get back to us if you have any other questions.

• Error codes: Code 80070005, I cannot update Windows... I used the Unility FixCleaner but I still get the same error message. How cal I solve this problem?

  Error codes: Code 80070005, I cannot update Windows... I used the Unility FixCleaner but I still get the same error message. How can I fix?

  http://social.technet.Microsoft.com/forums/en/itprovistasetup/thread/95edbee4-a75c-48AD-91D1-5316a96f9567

  http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.windowsupdate&tid=1ab369b4-7d27-4951-8047-09c861ff5bc1&cat=en_US_d02fc761-3f6b-402c-82f6-ba1a8875c1a7&lang=en&cr=&sloc=en-us&m=1&p=1

  See if the information above solves the problem.

  If this is not the case, try the Windows Update Forum, the link below:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I need help with a 1706.Does error message, someone knows how to solve this problem without cost me?

  Someone will help me fjnd out what to do and how to fix it. My problem is when I try to install anything, I get an error message 1706.  can anyone help me solve this problem without cost me fifty dollars or more

  See:

  You receive an "error 1706. Setup cannot find the required files...

• Error message: Winlogon.Exe could not locate the item. This Application did not start because Comctl32.Dll was not found.

  Update of security hung up during installation. I waited 12 hours for the update complete and nothing happened. Whe I reboot XP P4 syster, I get the Message from messageError: Winlogon.Exe could not locate component. This Application did not start because Comctl32.Dll was not found.

  Re-installed SP3... Installed hard drive then... cloned old drive and new drive... After several updates, it seems to do very well. Tried several programs/operations and seems normal. One day turned but didn't have to build another system or this one back up.  Thanks for the idea.     F

• Error message ordinal 1265 could not be located in the dynamic library IML 32 dll linl

  original title: error message
  Can anyone provide the solution for "1265 ordinal not found in dynamic library IML 32.dll linl. I'm trying to load a disc with a number of speed up the programmes on this subject. Thanks for any help

  Hi David77Mad,

  1. did you of recent changes on the computer?

  2. not the problem only occurs when you use a particular disc?

  Method 1

  Iml32.dll file is a component common to basic applications and created on former Macromedia Shockwave, now known as the Adobe Shockwave.

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If the previous step fails, then I suggest that you uninstall adobe shockware and check if it helps.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

• Why do I get an error message indicating units is not defined?

  Why did I get this error message?

  The unit Bar Delta-P of the string "[1] / IPT_Cylinder_1" is unknown.

  Define a new unit or an alias of the unit.

  Hello J,

  I was able to run your script posted by without error until I got the 'Calculate' button based on the amount in non-controlled ANALYSIS.  At the time wherever I checked it, however, your VBScript even produces on my computer the error you get on your own, to the ChnAverage() command.  Thus, I think somehow this button in the ANALYSIS got recently checked on your computer.  If you have the "Calculate the quantity-based" button checked, you see also avenues of treatment on the data portal:

  

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Error message: Windows Installer could not be accessed.

  A maintenance program that I run called System Mechanic deleted my Windows Installer and I think messed up its registry.  Everytime I try to reinstall the installer, I get an error that reads, "this update is not for your version of windows."  I tried all the available downloads.  Nothing works and I'm afraid that a full system restore is my only option.  Furthermore, none of my restore points of work to solve the problem.  Is there something that can be done?

  Start with this tutorial from Microsoft Support:

  http://support.Microsoft.com/kb/2642495#top

  Another tutorial

  http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/

  Past responses to this forum on the same topic:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/the-Windows-Installer-service-could-not-be/4153caff-17d0-4EB8-916F-33ad07f2be75?page=2

• Get the error message that Setup could not copy a critical file. Please try to reinstall. (Error code: 43)

  Have tried again and again to install. Running Windows 7 Pro 64 bit SP1. Anyone got any ideas? Downlaods the installation file, then after about 1 minute to get this error? Grr stuck

  

  Hello

  Please try following steps

  (1) open following link https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-7-8-9-downloads.html

  (2) open a new tab in the same browser

  (3) open the following link in this http://prodesigntools.com/trials2/AdobeProducts/KCCC/1/win32/ACCCx3_4_1_181.zip tab

  (4) unzip the files using 7zip or winrar

  (4) install creative cloud using the stup file obtained after having unpacked the file

  Note: It is important to do this step by step as opening first link is to ensure that you get no error of access denied when using the second link in this browser.

  Reference Re: there is an error message during the download of cloud creative coming 43 error code

• ERROR - comments operations agent could not be contacted

  Hello

  We have a workflow that cloned clones of a paralytic, and after that VMware Tools begins in one of the virtual machines, we run a command script by using the workflow "to run the program in the comments.  We run this process of cloning several times without problem, but 1 on each ends of 5-10 with the error "failed to contact the agent of operations of comments.  Anyone know what can cause this problem or how we can implement workaround for it?

  Thank you
  Dan

  I'm not terribly sure of what could be the cause... Intermittent errors like that are always a big challenge to resolved. I can however make a suggestion on workaround. I would suggest adding to execute the program in the comments of your overall workflow of exception management... Drag a task containing a script or a logging element and drop it onto you existing call to the program in the comments of your workflow. This will create a new path with a red line (way of exception). On the program running in the comments element, you must now bind the exception to an attribute - the default name for this is "errorCode" - go come and create this attribute and use it for binding. Then pass this error code in your new logging or task scriptable element to provide feedback/indication that there was a problem and you are re - try. Add a sleep or wait that the time element (requires a wait time setting) in order to add a little break in the workflow. Then, remove the end of this exception path element and connect the last point back to the run the program in the comments of the workflow... so the flow should be something in the sense of:

  1. Regardless of prior treatment do you
  2. Clone/customize VM
  3. Run the program in the comments
     1. If exception, wait 30 seconds (or whatever the weather) and try again
     2. Eventually, a maximum number of attempts and implement a counter to track these - if max is filled, then lift the exception and/or e-mail notification
  4. End of the workflow

• Error messages: specified module could not be found for c:\windows\system32\tuvujuka.dll and c:\PROGRA-1\MYWEBS-1\bar\4.bin\M3PLUGIN. DLL

  I get two error messages when windows is loaded.  Specified module could not be found for c:\windows\system32\tuvujuka.dll and c:\PROGRA-1\MYWEBS-1\bar\4.bin\M3PLUGIN. DLL
  How can I fix?

  Hello

  • When you receive this error message?
  • What were the changes made before the issue started?

  I suggest you make a system full scan just to be sure.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• error message: windows mail could not be started because another instance of it is still ongoing?

  "windows mail could not start because another instance of it is still running on YOUR computer." Pls. log off windows, and then restart windows Messaging. If the problem persists, save UR work and restart YOUR computer. The computer (Dell inspiron 531 s) that I had for 2 years and no has not given any problems trying to open windows mail until a week ago.

  Would appreciate your thoughts on how to fix this problem I continually have to close and restart.

  Thank you.

  In addition to Ajay has suggested, try to repair the database (www.oehelp.com/WMUtil/) and use its suggestions to determine which program is responsible for run Winmail on its own.  Also check 3rd party, such as antivirus, program interferences.  See www.oehelp.com/OETips.aspx#3
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  "windows mail could not start because another instance of it is still running on YOUR computer." Pls. log off windows, and then restart windows Messaging. If the problem persists, save UR work and restart YOUR computer. The computer (Dell inspiron 531 s) that I had for 2 years and no has not given any problems trying to open windows mail until a week ago.

  Would appreciate your thoughts on how to fix this problem I continually have to close and restart.

  Thank you.

• Error message for PS6: could not initialize Photoshop because the preferences file was invalid (it has been deleted); It does not open. How can I fix?

  Has anyone else got this error message? Were you able to fix so that Photoshop CS6 can launch/open correctly?

  I have an iMac (24 inch) early 2009; 2.66 GHz Intel Core 2 Duo; Memory 8 GB 1067 MHz DDR3

  UPDATE: I ended up uninstalling the Software Photoshop CS6 put it back and fixed it. I will be upgrading to CC as soon as I can afford, I hope in a year or more - I just need my current CS6 software to the outfit to keep until I do...