Whenever I start my computer, I get the message 'kctcadms.dll' is not found.

Similar Questions

• Whenever I start my computer, I get the message: "this file doesn't have a program associated with to perform this action...". »

  Whenever I start my computer, I get the message: "this file doesn't have a program associated with to perform this action...". "for my external drives.  I use these daily backup USB drives. It seems that the backup will run, if I acknowledge this message by clicking OK. If this is not the case - it won't. Why is that happening and how can I solve this problem?

  You can repair the associations used to readers.  One of my fellow MVPS, Shawn (no relationship lol) has default binding settings in his site here:

  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

  Just scroll down to find the link of 'reader', click it, and launches the link.  You can do the same thing with "folder" and "directory" to be thorough.

• Whenever I start my computer, I see the message, "C:\Windows1\Kjoralir.dll" is missing.

  Whenever I start my computer, I see the message, "C:\Windows1\Kjoralir.dll" is missing.  This happened for several months, but I just ignored him.  Don't know if it's related, but a user cannot disconnect without pressing the Windows key and the "L" key at the same time.

  Tonight I ran a registry repair program, and it fixed a lot of errors.  But, always, the message came after a reboot.  I don't know what it is, what it does or how to remedy the situation. Can anyone help?

  Thank you!

  You may have damaged even more by running a registry cleaner for Windows. The best registry cleaners are snake oil, and at worst they will damage MS Office and sometimes Windows itself. Details:

  http://aumha.NET/viewtopic.php?t=28099

  For the problem, Googling for this file appears your post. When you get no hits for a filename on Google, chances are high that it is a malicious program file. Either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup.

  Because you had a piece of malware, the chances are too high you had others. It would be a good idea to scan. I recommend to download and install MalwareBytes' anti-malware (MBAM) from http://www.malwarebytes.org . The program is free. (There is a paid version, but you don't need to buy it to remove the malware).

  Manage startup:

  (for XP) Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• Whenever I start my computer, I get the blue screen of death. I'm not getting in what concerns the opening of session and there is no prompt to start in safe mode. Whenever I start my computer the error code and message on blue screen are different.

  I have Windows Vista Home Premium. I was on the internet when my computer screen turned blue and a message told me that a problem has been detected and Windows has been shut down. He said that I had tried to do something with memory executable not executable (I don't have a note of the code). He said as he poured out memory. Now, whenever I start, the blue screen of death gives me different messages and different error codes. Today, he says:

  IRQL_NOT_LESS_OR_EQUAL

  and codes of error STOP: 0x0000000A (0x0000001B, 0 x 00000600, 0x810A90B0, 0x00000001).

  PC World say that they need to reinstall Windows, but I have some really really important files on there that I have not supported (I know, really stupid on my part) and they said they cannot guarantee their recovery. Is there another way to fix it?

  I've been on the forums and suggestions involve me to be able to connect to my computer. Blue screen hits me before I can log on, and there is no prompt to start in safe mode.

  Thank you very much!

  Try this to save your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.
  Mick Murphy - Microsoft partner

• Whenever I start my computer, I get the error 0xC00E556.

  No idea how to solve this problem?

  Hello

   
  1 did you the chnages in the computer before this problem?
  2 did you check status of output in safe mode?
   
  I would like the season you try the following methods.
   
  Check the status of the question in safe mode.
  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  
  Keep the computer in a clean boot state and check the error message. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
  Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

• whenever I start my laptop I get the message: "Configuring updates 3/3 0%"- and restart by yourself

  Windows Home premium - Portuguese

  Hello

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista/Windows 7 with the Windows installation media and use the repair feature

  How to do a startup repair in Vista and Windows 7
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the system - Vista Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  This tells you how to access the system - Windows 7 Recovery Options
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to do a system restore in Vista and Windows 7
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a disk of Vista or Windows 7.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• When I start my computer, I get the message "runner error invalid BAckWeb application id 137903" what is it and how can I fix/get rid of it?

  Runner error invaldi 137903 backweb application ID

  Runner error invaldi 137903 backweb application ID

  You can have an application antivirus or antimalware too aggressive.  Which do you have?

  See: http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00061410

  I suggest NOT to take advice of HP to make an "HP System Recovery".  If you are unable to uninstall HP or Compaq connections, you can probably prevent the error message by disabling the application HP Backweb to start as follows:

  Removes the AutoRuns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Install and let it scan.  When the analysis is complete, click the 'connection '.  Examine the entries in the tab log for an entry which seems related to the Backweb or HP or Compaq connections connections.  If found, clear the check box for this item.

  Restart and confirm that the error message does not appear.

  If you cannot determine which of the no doubt several items related to HP is the culprit, uncheck half of them and restart.  This repeatedly until you identify the startup item that is causing the error message.

  In AutoRuns, leaving an unchecked item prevents him from starting automatically at startup, but you can restore the automatic start simply be rechecking the box.  Once you determine you want to never see again the question, you can remove it.

• What should I do when after Lightrom 6 worked OK and I was rocking it draws to develop, all of a sudden I have started getting the message "folder or file not found?

  I downloaded photos successfully in Lightroom 6 and were able to develop and even export but suddenly in the process of development or export, Lightroom gives the message "File not found" and "file cannot be found. These pictures are already in Lightroom, how can't he not know where they are? And is it a problem with Lightroom, my computer, or what I did? And what should I do to correct this?

  Photos are never stored in Lightroom. They are stored on your hard drive somewhere, instead you put them, or to the place where you education Lightroom to put them.

  Lightroom is a database. When you import a pohtos, a record is created in the database for each photo, which contains the file name and the location of each photo. When the photo is no longer in the location Lightroom is looking (because somehow the file or folder has been moved, renamed or deleted outside of Lightroom), Lightroom indicates that it does not find the photo (or the photo is missing).

  Therefore, find the photo using your operating system. Once you have found the photo, you must tell Lightroom where the photo is, and what's his name. The exact tools used in this step are described here indetail: Adobe Lightroom - find folders and files moved or missing

• How can I get the help topics in windows on windows vista, when I click Help on any page web I always get the message of help topic not found this page under construction

  I BOUGHT A SECOND HAND TOWER WITH WINDOWS VISTA HOME PREMIUM PREINSTALLED, THE PROBLEM I HAVE WITH EACH WEB PAGE OR PROGRAM, WHEN I CLICK ON HELP ON THE TOP OF A PAGE, I GET THE WINDOWS HELP AND SUPPORT WINDOW POP UP. WHEN I TYPE IN A HELP TOPIC AND CLICK SEARCH, I ALWAYS GET A MESSAGE TELLING ME RESEARCH TOPIC NOT FOUND AND BELOW WHAT HE ALWAYS SAYS THIS PAGE IS UNDER CONSTRUCTION, IT DOESN'T MATTER WHAT HELP TOPIC I PAT ON THE SEARCH BOX, I STILL HAVE THE SAME MESSAGES

  SOMEONE CAN ME ADVISE ON THIS POINT.

  I WOULD REALLY APPRECIATE ANY HELP.

  JOHN ROBERTSON VS

  Hi JohnRobertsonVS,

  Method 1

  Refer to the Microsoft article to download and install Windows Help program (WinHlp32.exe), check to see if it helps.

  I can not open Help files that require the Windows Help program (WinHlp32.exe)

  http://support.Microsoft.com/kb/917607

  Method 2

  Try the method below and see if it helps.

  a. Open a command prompt window and run the following command:

  regsvr32 msxml3.dll

  b. Press ENTER.

  Note: To open a command prompt window, click Start, click programs, accessories principally made, right click Guest and then click run as administrator.

  Method 3

  If the previous step fails then I suggest that scan you SFC on the computer that would be a corrupt system file search.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Get a message PhotoBase.dll is not found, reinstall it by trying to open the photo gallery.

  Original title: PhotoBase.dll has not been found, re - install

  While searching for the location of the file in my pictures, I get to a point where I get a message on "photobase.dll not found, reinstall it can solve the problem," this is whn I try to open the photo Gallery icon

  Hi SergioAndrade60,

  Perform the control and analysis of file system (CFS) auditor if this solves the problem. SFC toolscans system files and replaces incorrect versions of system files by using the correct versions.

  For instructions, see How to use the tool File Checker system to troubleshoot missing or corrupted system files on Windows Vista or Windows 7 .

  http://support.Microsoft.com/kb/929833
   
  If the link above does not solve the problem, I suggest you write the topic in the following forum.
  http://answers.Microsoft.com/en-us/windowslive
   
  Hope this information helps.

• When I start my computer I get the message "Windows Live Mesh, there might be a problem with your internet connection make sure computer connection and try again, I run Windows Vista"

  I run Windows Vista.   Recently on commissioning the first thing that appears on my screen is a 'Windows Live Mesh' message, "there could be a problem with your internet connection.

  connection.   Ensure that the computer is connected to the internet and try again".

  My computer is connected to the internet, and it works very well.   How can I get rid of this annoying message.

  I tried all means to find this file on my computer, but it does not appear to be

  Can you help me please

  Mike Gray

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Perform the check and the boot if the problem persists.
  
  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  
  Note: Follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135 
  
  Hope that helps.

• Trying to open the Game Fish game I get the message: procedure entry point not found links library is dynamic kernel 32 ddl?

  My computer crashed and I had to reinstall everything.  Now, I get an error message when I try to open a Big Fish game, although I can open top spin very well.  Can someone help me understand what I need to do?

  Hello

  · What is the service pack installed?

  · What is the number and the model of the computer?

  I suggest you to uninstall and reinstall the game Manager and check if it helps. You can check the link for the procedure below: http://bigfishgames.custhelp.com/app/answers/detail/a_id/1634

  For more assistance, you can post your request in the forum of big fish: http://forums.bigfishgames.com/forums/list.page

• I start my computer, I get the DELL logo, then I have to restart my computer ctrl alt del it continues for 2 to 6 hours

  Whenever I start my computer I get the DELL logo, then I have to restart my computer keys ctrl pressed Alt del this continues for 2 to 6 hours I'm finely getting online, how can I do this faster process

  Sez helps Vista...

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  The problems of Internet connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

• At the start, receiving the message "Primary Drive 1" not found on Dell Dimension 2400 desktop

  Original title: primary drive 1 not found

  I'm helping a senior Windows user with a problem on his desktop Dell Dimension 2400.  At the start, he gets the message "Primary Drive 1" not found.  Can someone point me in the right direction as to what measures to take next?

  THX,

  Mike T goes.

  Hi Mike t. in Virginia

  You can check out the following link and try the steps suggested by Samhrutha G, Support Engineer, December 3, 2010 and check if this may help:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/primary-hard-disk-drive-1-not-found/fa3e591f-daeb-47bf-8f6f-3238f9507b6a

  Hope this information helps.

• Whenever I start my computer, I get "0 x 80070006 initialization failed. The handle is invalid. »

  Whenever I start my computer, I get "0 x 80070006 initialization failed. The handle is invalid. "How can I fix it?

  Since my answer does not resolve your problem, please do not mark it as the answer.  I would like to deselect you.  Thank you.

  Try a clean boot of your PC and see if the error persists. Exactly how is determined by your version of WIndows and so far you have not updated this thread to let know us what version of Windows you are using.  Do now.  Click on modify under your original message and change the drop-down windows to indicate your version of Windows.

  You can also see items here: http://support.microsoft.com/search/default.aspx?mode=a&query=perform+a+clean+boot&spid=global&catalog=LCID%3D1033&1033comm=1&ast=25&ast=28&ast=30&ast=31&res=10