Whenever I try to change the settings for startup from the Control Panel, a pop up tells me that I need to activate Windows Defender and open

Similar Questions

• When I turn on my computer it tells me that I need to activate windows. I click on 'YES' it takes me to the activation page and says that Windows is already activated.

  Windows XP Activation loop.

  When I turn on my computer it tells me that I need to activate windows. I click on 'YES' it takes me to the activation page and says that Windows is already activated. All I can do is, click 'OK' and he takes me into a log on screen with my name on it and goes through the same process, as described at the beginning of this statement. I'm in a loop. The only way out is to wipe my hard drive and reload windows new who, within 30 days, it will do no doubt once again. How to do this?
  For 3 years I rebooted my computer. That's why I reloaded it in the first place. I sent this version of Windows XP by Microsoft and have recharged the system at least 4 times in the past 10 or 11 years.

  Ken

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to see link below and check if it helps.

  You are prompted to activate Windows XP or Windows Server 2003 every time that you start the computer:

  http://support.Microsoft.com/kb/312295

  Hope this information is useful.

• InDesign cs5 crashes whenever I try to change the mark formatting via Type > reference Option Document or paragraph using the span columns Styles

  InDesign cs5 crashes whenever I try to change the formatting mark by going to the Type > Document reference Option > and then I try to choose a paragraph style, I already put in place. I need to use the paragraph style includes columns of Span, which I think may be the issue. I think this because when I then tried to create a new document and re - import styles, it won't let me even the columns of the span feature is added the paragraph in question Style.

  I can send screenshots at all (for example, dialog boxes) if it would be helpful to understand the question, I'll have.

  Any help would be greatly appreciated!

  Thank you.

  They used to have a feature called 'Useful response', but in my view, which has not been restored yet since they have recently updated the forum software. No problem. Just trying to help you.

• I had my computer repaired and now I get the message that I need to activate Windows. When I put in the product key, I get the message that this is a mistake. Is there anyway to fix this?

  Product key for Windows Vista

  I had my computer repaired and now I get the message that I need to activate Windows.  When I put in the product key, I get the message that this is a mistake.  Is there anyway to fix this?

  Activate by phone

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  Pay attention to step 2: how to do a phone Activation.
  Note: If the activation service informs you that she has failed and cannot help with activation, thenSTAY ON THE LINE and your call will be transferred to an operator of activation which will help you to activate your copy of Vista.

• How can I turn off indexing of the control panel. I tried, but failed. I need instructions step by step please

  I want to disable indexing of my computer via the control panel... I tried, but failed.  Can someone give me a route step by step on how I disable indexing with the control panel function?

  Open Add/Remove Programs, locate & open Add/Remove windows components"."

  Locate & uncheck "indexing service", close when thru.

  In addition, we can go to run, type: services.msc

  MSC, highlight indexing, double-click, reset the properties to "disable,"

  'manual' or 'auto', firm when thru.

• I get the Ox800106ba error code when I try to activate windows defender and a gel to the top of the screen for a few minutes.

  Windows Defender does not illuminate

  Hello

  Are you running MSE or other antivirus/security programs stop Windows Defender running?

  ------------------------------------------------

  Troubleshooting of Windows Defender
  http://support.Microsoft.com/kb/555957

  "%ProgramFiles%\Windows Defender\MsAsCui.exe" is the folder of the default Defender

  Start - type in the search box-> Windows Defender - find top - make a right click on it.
  RUN AS ADMIN

  If no joy using Start - computer or Windows Explorer to access this folder and create a
  Shortcut to put on the desktop and the Start Menu. You can also right click on a shortcut this and
  see if they point to here.

  Goal
  "%ProgramFiles%\Windows Defender\MsAsCui.exe".

  Start in
  "%ProgramFiles%\Windows defender.

  How to enable or disable the Windows Defender
  http://www.Vistax64.com/tutorials/93118-Windows-Defender-off.html

  --------------------------------------

  Maybe something here if necessary:

  What is display / causing the error message? Some anitvirus/security/antispyware products can
  cause this error. On those who use you, including those that your never had even those
  uninstalled (the remnants can cause problems). McAfee is just an example of what many can do.

  Start - type in the search box - Services - find top - Right Click - Run as Admin

  Windows Defender - value STARTED and AUTOMATIC

  or set MANUAL and STOPPED if necessary

  Fix for the problem of 800106ba.
  http://support.Microsoft.com/kb/931849

  Error (an example) of McAfee report.
  http://service.McAfee.com/faqdocument.aspx?ID=TS100610&lang=en_US&prior_tid=2&AnswerID=16777216&Turl==http://KB.McAfee.com/InfoCenter/index?page%3Dcontent%26id%3DTS100610%26actp%3Dsearch

  Check also:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/574fb871-034C-4B42-B800-328af16a9177

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I can't log on to windows xp after that I erased the validation process. I get messages contradictory screens saying that I need to activate windows, then windows is already activated. Help, please

  I'm trying to get past the log on screen in Win XP.  I activated my copy of XP, but when I try to go into windows, it comes back with a message "you must activate Windows first.  When I try to activate (again), it returns a message "Windows is already activated.)

  Anyone know what is happening?
  Thank you
  Tom

  Hello TomRothweiler

  The steps also included Charles method 1: Guided Help to remove the script that interferes with Windows activation. 
  "The requirements to install and to use this guided help.

  • You must be logged to Windows using an administrator account to install and to use this guided help.
  • You must run Windows Server 2003, Windows XP Home Edition, Windows XP Professional, Windows XP Media Center Edition or Windows XP Edition Tablet PC to install and to use this guided help. »
  The requirements for this stage, it seems you don't need the disk but only download Guided Help and automatically executes the steps for you:
  Method 1: Guided help to remove the script that interferes with Windows activation

  Guided Help is available to remove the script that interferes with Windows activation. Guided Help can automatically perform the steps for you. The actions that this Guided Help performs cannot Ωtre annulΘe after that Guided Help is finished. For more information about guided help, click on the number below to view the article in the Microsoft Knowledge Base: 915092 description of Guided Help for Microsoft Knowledge Base article

  You don't need to refer to the Charles link, I posted the download for you. Click on it to run it and let us know if it helps. Thank you.

  Download Guided Help

• How to: using the same control panel for several vi and reproducing change to the control panel.

  I created a labview project that contains about 40 vi.  Each vi has a joint control panel which is a group of ip address, or address of the port and the parameters that are passed high-level vi at low level vi for the purpose of control and access our daq cards.  As this control panel exists in all the vi and must not be the same there is a problem when the need to make a change or update the controls during development.  The problem is how long it takes to go and change the control panel of each single vi.  I wish I had a way of reproducing a change in the Panel of control through all six simultaneously.

  All controls in the control panel are in a bundle, so all values are passed to 1 thread.

  I tried to turn the Panel in a sub vi and this way I can just "create control" and have output parameters maniuplate vi, but if I update the vi, I still have to go back and create a new control for each vi under the control has changed.

  I tried using secondary and the creation of the control panel in a sub vi which is displayed in the secondary, but gives the undesirable consequence of not being able to view or change the settings of the control panel if the program does not work, as pristine as when sub-panels program does not work.

  Is there a another way to display the front panel of a Subvi next using a panel of void?  Is there a better way to propagate changes in a bundle in a series of vi?

  Yes a def type might help you and I would take the next step to make a strict type def if you want the look to be the same on all its bodies. You can also view this nugget on Type definitions for more idea about it.

  Have fun

  Ben

• How to change the language of the control panel

  Hello

  Hp scanjet 8270 control panel display shows different language not English not necessary Solution how to change the control panel display language to English.

  Hello sajithgosh

  The product that you have is a commercial scanner. I suggest you post in the HP Business Support forum for a better chance to find a solution.
  
  You will find the Board Commercial Scanjet here.
  http://h30499.www3.HP.com/T5/scanners/BD-p/BSC-418

• Error, "Page failed to Load", while customizing the control panel.

  Hello

  I recently inherited a second hand dell tower which has Windows 7.

  Everything seems to have set up ok but when I go into control panel customization, I get the message "Page failed to Load".

  After having sniffed around, it seems that the Control Panel does not use a program that the computer recognizes.

  I went through various forums for the answer, but nothing helped.

  Any suggestions?

  Hello

  Thank you for the update. It is unfortunate to know that you still experience this issue.

  As you are facing the issue in the safe mode, as well as in the new user account, it seems that there is corruption of system files that cannot be replaced by the new file system. But, you can also try to check your hard disk for errors of the last step. Read the following article.

  Check your hard drive to find errors in Windows 7

  http://support.Microsoft.com/kb/2641432/en-us

  Warning: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Please, try the steps above and update with the State.

  Thanks again for we keep posted!

• Windows Defender and the malicious software removal tool not doing anything to protect against malware, why Windows Update keep harassing upgrade us on a regular basis?

  original title: WHY Windows Update keep up to date USELESS of Windows Defender and installation USELESS malware remover?

  I'm a computer technician who makes a TON of virus remove money from Windows computers.  Two-thirds of my tasks of repair involving the elimination of viruses from Windows and trying to fix the Internet Explorer, the worst browser known to humanity.

  I have a question about Windows Defender and the malicious software removal tool.  These are two programs entirely worthless, evidenced by the fact that computers with them installed still get infected of all viruses, Trojan and rootkit out there.  Clearly, if these two programs of malware Microsoft has done anything to protect your computer, it would have been without having to release still a THIRD tool antivirus, "security essentials" for Microsoft.   I'm not complaining — the way Microsoft Windows absorbs malware like a sponge, put a lot of money in my bank account. Please keep doing what you're doing... however...

  My question is, given that Windows Defender and the malicious software removal tool doing nothing to protect against malware, why Windows Update keep harassing upgrade us on a regular basis?

  Windows defender is not an antivirus program, it is designed to protect against spyware.

  If you don't like them, so do not use them.

  http://support.Microsoft.com/kb/890830

• HOW TO REPAIR WORD VIA THE CONTROL PANEL

  WHEN I TRY TO OPEN MICROSOFT WORD, I GET A MESSAGE SAYING THAT IT CANNOT OPEN TO TRY AGAIN OR FIX IT USING THE CONTROL PANEL BUT I CAN'T FIND WHAT I NEED TO DO. Help, please!

  Click on uninstall, and then click Repair

• Find the control panel 'move' ('move' window)

  Hello everyone, I am using Illustrator and try to find the control panel 'Move' as described in step 10 of this tutorial:

  ustrator http://www.blog.spoongraphics.co.uk/Tutorials/How-to-Create-a-Vector-Safari-Compass-in-ill

  If someone of you can help me because, so far, I can't find it anywhere, I will appreciate it. Thank you very much.

  Very easy. With something selected, double click on the move tool.

• I did no more than "volume control icon", error message says to add through "add programs" in the control panel

  original title: the Volume control icon

  I did no more than "volume control icon", the error message indicates to be added via "add programs" in the Control Panel, how can I do this?

  You are using Windows XP?

  This might help: http://support.microsoft.com/kb/319095

  And I hope that you have your Windows XP installation disc.

• material and audio option is missing in the control panel using professionals widows7

  I was looking to create a link put in HDMI as an option to play the sound.  I don't understand why the control panel option is missing.

  Hello

  There is no option material and audio, just a good option.

  Open Control Panel.

  In up/right, select one of the options icon in the view by: menu.

  Click on the sound icon.

  Concerning