Whenever I turn off my pc check sum error come

In recent weeks whenever I turn off my pc sum check error come, I thought that maybe by low battery gone, so yesterday, I brought a new, but still the problem. I'm tempted to set up manually my date and time... Please help me like always thanks in advance...

Hello

Thanks for posting your question on the Forums of community of Microsoft.
This error can be caused if the CMOS values have been corrupted. So, I suggest you to contact the computer manufacturer and get the updated BIOS updated.
Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Thank you.

Tags: Windows

Similar Questions

  • How can I get rid of the configtool.exe whenever I turn off my computer?

    How can I get rid of the configtool.exe whenever I turn off my computer?

    Hi Mark,

    ·         You have a Palm PDA connected to the computer?

    configtool.exe process is multi configuration tool - user which is used on Palm PDA or personal digital Assistant devices.

    It would also be possible that certain types of malicious files tend to hide as long as the process of configtool.exe to infiltrate your system.

    Method 1: You can run the Microsoft Safety Scanner to check the infection by the virus. Check out the following link.

    Microsoft Safety Scanner - free online tool for PC health and safety

    Method 2: Start the computer in safe mode and check if the problem persists.

  • How can I stop Firefox back to standard settings, whenever I turn off my PC?

    I have configured my favorite story of the icons, print, House etc. in the places that I like them, but whenever I turn off my PC the next day, they are in the standard set & I do once again, more than a little irritating because there has never been a problem before & past only began when I upgraded to 33.1
    Such things seem to happen whenever there is a upgrade, it got to a point where after years of use of Firefox I am seriously looking for a new default browser.

    Like to illustrate my point, when I restarted Firefox just after installing the add-on of troubleshooting all my custom icon settings are gone AGAIN.

    Your unsaved preferences.

    Create a new profile as a test to see if your profile is the source of the problems.

    See creating a profile:

    If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem

    Profile backup and restore

  • Whenever I try to install creative cloud on my computer I couldn't install error 1. I used adobe cleaner as suggested, turned off my security, but always error 1.

    Whenever I try to install creative cloud on my computer I couldn't install error 1. I used adobe cleaner as suggested, turned off my security, but always error 1.

    Lucy Sack you used the steps that are listed in the "failed to install" error Creative Cloud Desktop application to solve common mistake?

  • How to turn off automatic spell checking? My g-mail has already

    I have need 2 controls fate, and when I send an email, I can't the red line go away. Some of the words are not misspelled.
    Thank you!

    To turn off spell checking in Firefox:

    In the Options window , on the Advanced Panel, uncheck "check my spelling as I type".

    If the spell check corrects a number of words that are misspelled, it is possible that it does not use the correct dictionary. If you right click in a box that you can type in, you should see a menu "Check spelling" point and below a menu 'languages '. Check the menu of languages that the correct language is selected.

  • Drive external DRIVE not detected (2 PCs), after turning off the PC during the error checking

    I ran properties/tools/error-check on a (regularly used to back up this PC XP) external HARD drive. After 2 days, error checking was still running and not even 1/3 way 4th Phase but I need PC. It was not possible to stop "Error Check" from the dialog box then I tried Task Manager/Applications, which said that nothing worked, so I turned off the PC.

    When I restarted the PC, external HARD disk was not in my computer. Control Panel of configuration/addition does not see it no more. However, when I plug / unplug the station. HDD USB cable, the computer makes a noise and is also recognized in "Device safely Shut Down" as a USB storage device mass (but no drive letter). I tried to start/run/Cmd/Diskpart/List Disk and it is not listed.

    NB. I checked the post. HARD drive on a Linux PC, which also does not detect not, then it is certainly the post. Drive HARD, not the XP PC.

    Can offer you any advice?

    Hello

    · What is the number and the model of the hard drive?

    As you mentioned that the issue isn't with the operating system but with the drive hard, for better support I suggest you to contact the manufacturer of the hard drive.

    You can also get in touch with any local technician who can help you with the same.

  • How can I turn off automatic spell checking? That's all! Email, Facebook. I want that it STOP!

    Any time I type something (gmail, facebook, , etc) I get the spell checker.  It also changes what I type.  If I type a lowercase "i" it will automatically change it a capital letter 'i '.  I have this want to STOP.  I want what I type to stay what I'm typing.

    According to Gmail, this is a setting in my browser.  How to turn off this setting?

    Open internet explorer,.

    Use Alt + TA type or symbol of gear on the upper right and manage add-ons.

    Spelling correction on the left column, click

    Clear the enable check box on the lower left...

  • Whenever I turn off the external HD LR loses the images links

    Guys I need help with this. Whenever a turn of the external HD if I plug the same entry lost catalog the imagens links and I need to find the images in the catalog. Anyone know how to configure the lightroom to recognize the HD for the name I gave and not the name of this pc to give to every time a fact sheet on the HD link (:)) d (F) (I))

    Willy Souza says:

    = S

    Are in any case, you will need to fix?

    Yes and it's pretty simple.

    Open disk management. Start, type diskmagmt.msc and press the Enter key. You will get this window.

    Find the external hard drive and right-click on it and select "Change Drive Letter and paths".

    Then you get this window.

    Click the button change.

    In the next screen, select a drive letter at the end of the alphabet, and click OK.

    Now, all once again and this time select the drive letter that you want to have external. Once you change this back to the drive letter correct LR awaits you will have never have any other reader taking this letter.

    Note the drive should be connected and powered, and it should already have the correct letter.

    If another external drive is connected you first need to disconnect the other drive and your images are on.

  • Cannot turn off automatic updates and the Error Message on Loadup and Peridoically subsequently

    The following error message appears when the computer starts up, when I click on "check for updates", when I try to turn off the automatic updates in the preferences and at random times.  In the preferences, more precisely, I am able to choose the area that must go out looking for updates, but when I try to save the setup I get this exact error message.

    -----------------------------

    AdobeARM.exe

    The procedure entry point CreateProcessWithTokenW is not found in the library of Hotlinks ADVAPI32. DLL.

    -----------------------------

    The computer is an old laptop running Windows XP.  I think that it's Windows XP is a key reason why the error occurs.  That said I can't replace the laptop right now so I would turn off rather updated.  I've updated to the latest version of Adobe Reader from the Adobe Web site.  The new version added a 4th checkbox in the section to turn off the automatic updates, but I always get the same exact error message.

    Is there a hidden Windows Settings folder I have can be directed to Adobe Reader?  A file where I can change the automatic updates option from 1 to 0 to turn it off?  Because the software does not work.

    Please, create the following registry key:

    [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Acrobat Reader\11.0\FeatureLockDown]

    "bUpdater" = DWORD: 00000000

    In addition, you can run msconfig (via the Win + R), go to the Startup tab and deselct point of 'Adobe Reader and Acrobat Manager' (which corresponds to the process AdobeARM.exe), press on apply and restart your machine.

  • I can't open attachments of the e-mail account. When I try my computer turns off and restarts and when he comes back he says he recovered a serior error.

    A couple of days, I did a restore of the system at the end of July because the size of everything was off of the big time and had never done a system restore before.  Since I did, everything is returned to the way it was before sizes... and I can receive and send emails... I have JUST CAN NOT open attachments on e-mails.   When I click on the attachment to bring it up, it shuts my computer off and restarts it and when it turns on it says that it has recovered from a serious error.    How can I fix my email so I can set up attachments?

    What e-mail program?

  • Can't turn off the vertical synchronization.

    Hi all.

    I tried for centuries turn off vertical sync (vsync) in a certain game with various programs (PowerStrip, ATI Tray tools, ATI Catalyst Control center), but even if I managed to turn off vsync in all these programs, it actually does NOT turn off. I checked this with the own of the game FPS-audit tool (he said ~ 60) with Fraps (it said 60 institutions). With vsync off, FPS should be easily more than 200 (depends on the resolution too).

    I don't think that mentioning the name of the game is important at this point, but it's since 2000. My graphics card is ATI Mobility Radeon 3100 and the operating system is Windows Vista SP2.

    I also tried to run the game in compatibility mode, but they do not work.

    I heard a rumor that Windows Vista only checks the application for vsync setting and does not take into account these external programs. I hope that isn't true because vsync can be changed in the game itself (default setting is on).

    I ran all programs "as Administrator" so it should not be up to that. Help, please! This is the second forum I ask this question (never had one on the other).

    Hello VsyncHater,

    Thank you for the feedback.  You won't have to do a reg edition.  First let's get the latest driver for your video card ati.amd.com and the version of Vista, never use the update feature in Device Manager to search for the video card drivers.  Now, I've included a link to a full walk-thru for the ATI Catalyst drivers and that each parameter and means.  This guide helped me to improve my understanding of how the different settings worked and carried out gameplay and other visual media.  It should help get the game experience you're wanting you and how correctly the changes that Gloria was referring.

    ATI Catalyst drivers Guide

    Please let me know if this helps you.

    Happy fragging and tell them of Zack sent you.

    Zack
    Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • HP 15 Notebook: Mute light does not turn off!

    Hey so been having this problem with my light on the button mute. It does not turn off. I checked to see if the volume works and it makes. Mute works but the light just stays on. Help!

    Hello

    Try the following.

    Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72968.exe

    When finished, press and hold the Windows key and press R

    In the run window, type devmgmt.msc and press to enter.

    In Device Manager, expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, download and reinstall the Chipset driver at the following link.

    http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72183.exe

    When the reinstallation of Chipset is finished, stop the laptop.

    Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

    Kind regards

    DP - K

  • Turn off the xbox 360 causes internet to file on computer

    OK, so it happened for some time. Whenever I turn off my xbox 360 it causes internet on my desktop and laptops to be cut for about 2 minutes. Everthing is connected wireless and there is no problem when everything is turned on and connected. Just when I turn off the xbox.

    Hello

    Since the question is originally due to the Xbox.

    I suggest you contact Xbox support forums to get help:

    Welcome to the Xbox support

    http://forums.Xbox.com/xbox_forums/xbox_support/default.aspx

    Hope this information helps. Response with status so that we can help you.

  • BlackBerry Smartphones battery discharge when it is turned off

    Hello!

    Since I've updated my device software I encounter the following problem.

    Whenever I turn off my BlackBerry (8310) it seems to be disabled. However when I want to turn it back on (the more often in the morning), it appears to be dead. When I plug it into the wall to recharge, the battery symbol lights up. This obviously means that the battery was completely dead.

    Can someone help me?

    Thank you very much!

    Patrick.

    The battery of the device doesn't have energy for a reasonable period.

    Patrick, I would certainly consider the replacement of the battery with a new one.

  • How to fix VMware View Server certificate revocation check connection error?

    Dear community,

    For about 2 weeks, I feel a revocation of the certificate check error in our environment Horizon see 6.2. The strange thing is that, within 12 hours about two (replication) connection servers and the vCenter Server / server of composer (on the same machine) are considered as having invalid certificates, even if, in fact, they are valid (CA certificates). We use no security servers.

    The view admin console shows the following for servers connection:

    The server certificate is not approved.

    The server certificate cannot be verified.

    For the vCenter, he said (that I have validated manually the certificate):

    No problems found.

    Certificate is not approved, but the thumbprint of the certificate is accepted.

    With the connection series on 'full', States that the login server logs for the vCenter server:

    TRACE (B 17-0 - 0E98) < VCHealthUpdate > [NativeKeyVault] validateCertificateChain response: {result = FAIL, EndEntityReasons = cantCheckRevoked, ChainReasons = invalid, SelfSigned = false, EndErrorCode = 16777280, EndInfoCode = 258, ChainErrorCode = 16777280, ChainInfoCode = 256, PolicyErrorCode =-2146885613}

    As far as I can see there no similar entries for login server certificates in the newspaper.

    At the moment I am under the environment with composer and vCenter certificates manually valid and invalid connection (red) server certificates (as view clients and browsers are not disabled).

    I already checked that I am able to do everything 'green' again via setting the registry key 'CertificateRevocationCheckType'2 (as described here Configure the server certificates certificate revocation check). This brings me to the conclusion that one of the intermediate certificates cannot be validated. So, I had the information a "version" of an intermediate (intermediate certification authority) certificate has been revoked. There seems to be no coincidence - like the time point is as well, but this particular version does not appear to be used in the servers of my connection.

    However, even with full logging enabled, I can't information which (intermediate) certificate cannot be validated and why. I expected to see something like 'OCSP verification' or 'check the CRL' but I can't find it in the newspapers. However, I noticed that one of the intermediate certificates lacked the OCSP URL (even if the field "Authority Information Access" existed). Of course I updated the certificate with a version that contains the OCSP URL, but it has not changed anything.

    In addition, I checked manually all of the certificates in the chain with openssl (for OCSP) and CRLs as well, but everything seems to be OK (all URLS are accessible and no opportunity of certificate has been revoked). Actually, I do not interpret the error as "that the connection to the server is an invalid certificate because it has been revoked", but "it cannot check if it has been revoked. The servers do not need a proxy and nothing configured, so (I checked the proxy settings system context, also).

    For now, the problem is not critical, such as 'red' status connection server has no effect on our customers and so I could turn off certificate revocation check (or switch to check that the certificate of the server (2)). But of course, I would really solve the problem.

    Is there someone who can give me a hint on what to check, for example, how do I know which certificate cannot be controlled and why? Someone had the same or a similar problem? Support VMware is working on the problem as well, but they seem don't know is not the problem, either.

    I appreciate the thoughts and responses! Thank you!

    Best regards

    Fabian

    Dear community,

    During this time, I was able to correct the error described at the beginning of this thread. Jump to the end to see what could probably help you...

    1. At first, I installed an additional standalone VMware View Server connection in order to check the following related certificates:

      1. VMware support always told me to renew my certificates because they "were not valid" etc. - even if in fact they were (like external URL calls and attested manual verification and tests).
      2. That's why I created new additional certificates for the login server and configured to include the vCenter even as my production environment - only difference was I didn't inlcude the composer who runs the server vCenter himself.
      3. The result was that the server was "green" including both the vCenter Server certificate which could be 'not reliable' by the environment of production - strange, huh?
    2. After I reset the additional server to a turned wink where connection to the server was not yet installed (before that, I uninstalled the connection to the server in case there is information in vCenter thereon) and reinstalled as a replica of the production environment server. Somehow I expected this, but still quite strange the vCenter Server (and composer) now again was considered "invalid", even if the certificate of the server connection itself considered still valid and green. For test purposes, so I put certifice revocation checking on '2' (only one server certificate check) - but only on the 'old' production servers' and 'magical' everything has been considered valid. So as I see it, there seems to be some sort of information stored on the 'old' connection servers that makes them believe that invalid certificates and that the information is replicated on the third server unless I lower the revocation of the certificate controls on these servers. Altervative explanation could be that VMware View does not accept certificates with aliases that do not include the 'real' server name - that is / was in fact certificates the old servers connection. The new server certificate connection included the real name and the alias. I understand if this is the case, but then I expect that it be documented somewhere (I have not found this information) and also wouldn't understand why it worked without problem for several years before.
    3. After finding that out, I created new certificates for the 'old' connection servers, including aliases and real names and replaced the certificate on one of the servers (and restarted the login server) - only a few successfully. Once I put the revocation checking on '4' again on this server, the login server certificate was still considered valid, but not the vCenter and certificate of composer.
    4. Now, I've uninstalled the old login server (removed from the view) and reinstalled completely (including an update of the 2008 R2 2012 R2 OS) and after I have it reintegrated into the environment, everything remained green - as long I have will activate revocation checking on the second login server "old." This is why I did the same with this (completely reinstalled and reinstated it) and now everything is green with the revocation checking enabled on all replicas of server connection.
    5. The next step I uninstall the additional replica because I created only for troubleshooting purposes.

    So what will no doubt help in similar cases:

    • Reinstall the servers of connection one by one, including:

    • Uninstalling html access (if used), uninstall the login server to view, uninstall 'VMware' AD LDS Instance.
    • Removal of the connection to the server of replication group: run "s - r s uninstalled_ vdmadmin.exeservername" on one of the servers connection remaining.
    • Reinstall/Update OS (may not be necessary, but I did not test that)
    • Reininstall, return to the login server replica. If you used the certificates which included only the alias of the server I recommend you to create new ones, including the name of the server as well, but maybe it's not necessary as well. If you want to keep the certificates which only inlcude the alias it will be necessary to install this certificate after the first replication of the servers (see below).

    My question for technicians of VMware/developers: It is supported to use certificates include only the server alias. Otherwise why it worked before and where is it documented? Where are certificate cached information so that simply replace the certificate was only some, and not a complete success (see above). FYI - when I paired initially replicas that I had to install the CA (including only the pseudonym) after the first replication - now with certificates (including the server name and the alias), I could install the certificate before you replicate (= the login server installation).

Maybe you are looking for

  • Camileo H10 motion detection

    Hey,. I have the camcorder above. I used for the detection of movement in my apartmrnt that I work to see what my dog gets up while im at work. I put it correctly but when I come home the dead batetrys and it is only a video recorded. Any ideas? Thna

  • Messed up the initial configuration of Win Vista on Satellite L40

    I can only think that I messed up when performing the initial installation of Vista Home Premium on my new Satellite L40.I finished to the high withComputer\Vista C:\Users/comet containing all my stuff AND - outside of Vista C: - a full mirror in Des

  • Ansel Adams missing desktop photo

    Hi all Yesterday I udated my macbook for OS X El Capitan. Now my desktop image disappeared, Ansel Adams winter Sunrise, Sierra Nevada. Really makes me sad cause I liked this image. How do I get it back? Thank you. -Venus

  • deliver the Xilinx IP instantiation with myrio

    I can't instantiate all items in the range of Xilinx IP in my projects. I think I have all the necessary software installed, but there is always an error that says: "no repository of IP of the user not specified", even if I don't see IP functions in

  • HP laserjet p1102w: memory of toner p1102w

    No one knows how many cartridges the printer don't save in his memory or where I can find? Ive been through 3 until now and im save those used to fill the but I don't know if they will still be in the memory of printers or if I need to go through sev