Whenever I turn on my computer I get a box that pops up and say "Update: there is an error during installation." Please reinstall the application.

Similar Questions

• When I turn on my computer, I get a warning that says missing entry: entry Rundll.

  When I turn on my computer, I get a warning that says missing entry: entry Rundll. What is c? What should I do?

  Hello

  You did changes to the computer before the show?

  Method 1:
  Step 1: Check if the problem occurs in safe mode:
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
  Step 2: If the problem does not occur in safe mode, and then perform a clean boot and check:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Method 2:
  Run the sfc scan and check if there are any file system corruption.
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 3:
  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Whenever I turn on my PC I have a box that says "WINDOWS SOLUTIONS CENTER"

  original title: HELP WITH A POP UP BOX

  WHENEVER I TURN ON MY PC, I GET A BOX SAYING 'CENTER OF SOLUTIONS WINDOWS' IT SEEMS TO VERIFY AND THEN SAID: INSERT THE FLOPPY DISK OR CLICK BROWSE. THIS DRIVE AND WHERE DO I GO?

  Hello

  read below, if this applies to you

  You can find that your problem might be to do with the hp software

  http://h30434.www3.HP.com/T5/other-HP-consumer-products-and/HP-Solution-Center-is-installed-but-keeps-trying-to-install/TD-p/56278

  If the above does not apply to post more information

• Photoshop CS5, I get the message: some application components are missing from the Application directory, please reinstall the application.

  Trying to open Photoshop CS5 I get the following Message: among application components are missing from the Application directory, please reinstall the application.

  Can I get these downloaded components that my optical drive is broken.

  Download the CS5 products

• Whenever I turn on my computer, I get "Sqlite3.dll is not found."

  Original title: "Sqlite3.dll is not found."

  Whenever I turn on the computer. Once the desktop screen .it's a message "this application has failed to start because sqlite3.dll is not found. reinstalling the application may fix this problem".but the computer still can run that I don't know what was wrong and how can I fix this please?

  I'm not leaving your system works in selective startup mode, because that would leave you with a sloppy XP configuration.

  You must find the faulty startup item and get rid of it.

  Here's how:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there are over 70,000 and new threats are detected every day.  Always update your virus definitions before running a scan.

  Restart your computer and solve the outstanding issues.

• Whenever I start my computer, I get "Windows needs to be restarted to install updates". No matter how many times I reboot the computer, I always get this from the beginning. What can we do, or how to fix this?

  I bought my computer about 4 months ago and my friend installed Windows 7 above. Not too long after that I started with this problem and have yet to get it fixed or figured out. I tried to reboot 15 - 20 times in a row to get the message go away, but it did not help. The answers out there for the reasoning behind this?

  Sorry, I can only support Win7 RTM in this forum. Try to post in one of these forums: http://social.technet.microsoft.com/Forums/en/category/w7itpro/ ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• At startup I get this update error: 'there is an error during Installation. Please reinstall the Application. »

  I think I have uninstalled a program (c :) ") that caused this problem!... probably to do with 'PareLogic.'..." I do not know?

  I ' v tried everything I know with no luck. This annoying message is always there, every time you start, upward.

  You have uninstalled Paretologic via programs & features?

  http://www.ParetoLogic.com/resources/help/FileCure/195.htm

  Run Disk Cleanup?

  So if you start to msconfic, in the Startup tab is there an entry for Paretologic?

• I upgraded Lightroom today and the new version has given me several permission errors.  I followed the steps to solve the problem of permission and now I get the error code 16 - Please reinstall the product.

  I don't know how to reinstall from scratch.  Did I lose my data?  I backed up my files and catalog with time machine (before errors), but I do not know how to proceed.   Should I just uninstall the product?

  If you had installed the LIghtroom using Time Machine backup application or any other Adobe applications, yes it is best to perform the entire process of removal and reinstallation.

  If its just catalogue, that's fine, you can simply uninstall and reinstall Lightroom.

  Anyhw, if you have not installed the real application using the Time Machine backup, let us know if you tried steps mentioned in the link below?

  https://forums.Adobe.com/thread/1977483

  Re: Error in persistent Configuration 16

  In addition, you can try running the application of root user account once.

• The initial launch of DW CC 2014, get following error: "cannot locate the resource file in the Configuration folder. This file is Spectialized to run Dreamweaver. Please reinstall the application. "This app has been updated through CC.

  I have to first remove the DW? With the help of PC Win 7.

  The error message: "Unable to locate the resource file in the Configuration folder", so it seems that something is missing. Could be a permission problem... I would suggest:

  1. go to a user admin account

  Connect using built in Administrator | Create the local admin account. 7, 8, Windows Vista

  Install or run Adobe applications in the new user account. Mac OS X

  2 remove the application DW CC 2014 by uninstalling or using the cleantool.

  https://helpx.Adobe.com/creative-cloud/help/install-apps.html#uninstall apps

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  3. manually delete the directories of config according to KB: (you need to of course search the CC 2014 folder instead of the older versions in the KB)

  Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6

  This step will ensure that also the configuration file will be regenerated on re installation!

  4 reinstall on the new admin account and test again. If works please go back to the old account and test again.

  Good luck!

• When I turn on my computer, I get a RunDLL error.

  Whenever I turn on my computer I get this error... error loading C:\User\kimberly.adams1\AppData\local\asutiyogo.dll

  I tried to implement everything and can't seem to solve the problem. I downloaded the DLL fix several programs, and they are all the same. Download for free analysis, and after the scan they want all the money to solve the problem. I even went to run. CMD and typed in regsur32asutiyogo.dll and got this error. The "asutiyogo.dll" failed to load Module. Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. DLL files... the specified module is not found...

  I have Windows Vista Home premium service pack 2

  Anyone has an idea on how to solve this problem?

  Whenever I turn on my computer I get this error... error loading C:\User\kimberly.adams1\AppData\local\asutiyogo.dll

  I tried to implement everything and can't seem to solve the problem. I downloaded the DLL fix several programs, and they are all the same. Download for free analysis, and after the scan they want all the money to solve the problem. I even went to run. CMD and typed in regsur32asutiyogo.dll and got this error. The "asutiyogo.dll" failed to load Module. Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. DLL files... the specified module is not found...

  I have Windows Vista Home premium service pack 2

  Anyone has an idea on how to solve this problem?

  Hey kimmy07

  Search Google has no information so that it may be malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If this does not work in normal mode only the above work in SafeMode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and if the problem persists you may need to remove it from the startup procedure

  try this program for that

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  Walter, the time zone traveller

• How can I get rid of the configtool.exe whenever I turn off my computer?

  How can I get rid of the configtool.exe whenever I turn off my computer?

  Hi Mark,

  ·         You have a Palm PDA connected to the computer?

  configtool.exe process is multi configuration tool - user which is used on Palm PDA or personal digital Assistant devices.

  It would also be possible that certain types of malicious files tend to hide as long as the process of configtool.exe to infiltrate your system.

  Method 1: You can run the Microsoft Safety Scanner to check the infection by the virus. Check out the following link.

  Microsoft Safety Scanner - free online tool for PC health and safety

  Method 2: Start the computer in safe mode and check if the problem persists.

• How can I get calendar reminders Works will automatically appear on my desktop whenever I turn on my computer?

  I did this on my last computer but do not remember how I did it-program calendar reminders Works will automatically appear on my desktop whenever I turn on my computer?

  Hello

  The initial response is no longer valid because these focus groups were dissolved.

  Now -> Check with the Experts to work in the answers - work Forums

  Answers - Forum work
  http://answers.Microsoft.com/en-us/Office/Forum/office_other

  =========================

  Original - response is no longer valid.
  
  Ask the Experts work here:

  Discussions in microsoft.public.works.win
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.works.win&cat=en_us_9804e2ac-c762-44C9-9c6f-90e45f32d772&lang=en&CR=us

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• When I turn on my computer, I get a bubble in the lower right of the desktop that says: "a program has been blocked from editing your search default setting". Then "click to change your notification settings."

  Whenever I turn on my computer I have a bubble in the lower right corner of the desktop that says: 'Search Settings Notification' then 'program has been blocked from modifying your search default setting". Then "click to change your notification settings."
  When I click I get a box called Toolbar Options. Tab shows the search parameters. Statement: "search settings protects your search settings of the browser to keep the programs change without your knowledge." I am then presented with 2 boxes checked with the following instructions: 1. protect my browser default search and let know me of any attempt to change it.  2. enable the browser error Network Wizard page.  Downstairs, the options are either save or cancel.
  My question is what does all this mean? Should I uncheck boxes or both? How can I avoid this message occurs ever time I turn on PC?
  I must tell you that my browser is Mozilla Firefox.
  Thank you.

  original title: Notification settings search

  Hello

  I would check the first box for sure, the second is not as important but probably a good idea to choose from as well. Once you save it, it should not appear again.

• Lately when I turn on my computer, I get a message saying. "Windows mail can compact the message store. This can take up to a few minutes. »

  Lately when I turn on my computer, I get a message saying. "Windows mail can compact the message store. This can take up to a few minutes. "It looks like a real message of Windows but when I click on the link"Get help from communities", it does not work. I cancel or close the message, because I fear that the message can be fake and won't open my computer for a virus or worse. Anyone has any info on this particular message? I can't find anything in the help section of Windows. Thank you.

  original title: compaction of the database messages

  Hi Kathy,

  Please click on the orange button at the top of this page that will help you find the right forum for your problem in ads.

  Mike

• Whenever I turn on my computer windows live messenger lights! How can I stop this?

  cancel the contract

  
  

  I wish that my contract cancelled now! whenever I turn on my computer windows live messenger lights! I have not more contract. she resumed.

  Hello

  What contract? You must communicate with who you let any contract.

  Windows Live has its own Support and Forums for help with any problems.

  Windows Live Solution Center
  http://windowslivehelp.com/

  Windows Live Messenger - Support
  http://windowslivehelp.com/product.aspx?ProductID=2

  Windows Live Messenger
  http://windowslivehelp.com/forums.aspx?ProductID=2

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">