whenever I use the crop tool, lightroom crashes and I have to restart. I'm using Lightroom CC 2015
Whenever I use the crop tool, lightroom crashes and I have to restart. IM using a PC, with Lightroom CC 2015
Hi Egorbey,
If the solution above Tanuj helps, you can read the troubleshooting section of this document for additional ideas and possible solutions in the long term:
Adobe Lightroom GPU troubleshooting and FAQ
In particular, consider trying to update your graphics drivers.
Mike
Tags: Photoshop Lightroom
Similar Questions
-
To the point, when I select copy or synchronization to copy pictures of other pictures better, my lightroom crashes and I have to restart lightroom. What needs to be done to solve this problem?
Please see: Solutions for error Lightroom has encountered problems of user permissions
Kind regards
Mohit
-
Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed
Hello
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during "blue screen of death," collisions
http://www.NirSoft.NET/utils/blue_screen_view.html
Displays information on all the "crash" of a table - freeBlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.
You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
I called Dell a few weeks ago. They had me remove the battery, press the power button 15 X and then restart. They did a scan of material and said that everything was going well. I ran once again virus scan software, and there is no virus. I deleted all temporary files. They said that perhaps, it might be a problem of software somewhere but wanted a ridiculous just to check amount only. Do I have other options as to how can I fix? This is a NEW computer that I just received in August!
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html---------------------------------------------------------------------------------------
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
a small box in the lower-left - show for all users can check only).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
they loaded and much more. This exceptionally effective utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to startup automatically when your system boots and you
opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
start the settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
The command - line String, product name, file Version, company name, location in the registry or the file system,
and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 the love of the updated drivers that can drastically affect the performance so I would update the main
drivers.This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
each driver in the list, additional useful information is displayed: load address of the driver, description,.
version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Always check in the Device Manager - tab drivers version you install actually shows up. This
because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
pilot - reboot - check that it is installed and repeat if necessary.Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
I am currently running Windows 7 home, and as the title suggests, whenever I try to access the network in Windows Explorer, it crashes. Does it as well as I'm in safe mode with network. Any help will be welcome.
Hello
1. What is the accurate and complete error message you get?
2. don't you make changes to the computer before the show?Method 1
I suggest you try the steps from the following link:Windows Explorer may hang in Windows 7 or in Windows Server 2008 R2
http://support.Microsoft.com/kb/2515325Method 2
I suggest you run virus scan online by using the Microsoft safety scanner.Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspxNote:
when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data. -
Automatically detect orientation using the crop tool
Hello, according to my knowledge the crop tool in CS6 automatically detect whether the image was a picture of format portrait or landscape photo format. I now use the trial of CC, but in this version, I can't find this option. When I now open a portrait-format photo cropping tool remembers the last harvest-setting. If it was a portrait-ratio is not a problem, but when I cropped photo landscape format I have to manually change the orientation from landscape to portrait.
Anyone who can help me with this? Or has this feature disappearted in CC?
Note that in your Options Panel in the upper part, you have 3:2 (4:6). To the left of that, right click on the crop tool icon and select Reset tool as in the screenshot, I sent earlier. This will change the options of the report tool that you see in my screenshot.
Once you have reset the cropping tool, send a new screenshot of the Options Panel.
-
So, where's the crop tool? Nowhere to be seen. And you still have a tutorial that says to use the crop tool, but if the obsolete tutorials, then why you always the same tutorial?
This tutorial - How to use Photoshop like a photo editor | Tutorials Photoshop Adobe CC - -9174 https://images-tv.adobe.com/avp/vr/ebed59ee-4453-4fbb-b9a9-e3f690f4772f/3e32511b-295c-4ca5-cc6d5cb4e8e9/d40f3d6e-6 a...
Here's a preview of my new Photo shop, I uploaded 4 days ago, it's your last version... look around, there's No crop tool.
lamptree wrote:
No, Pierre, already tried and did not work. However later
I found it and it works:
From the top to the left, press 'Edit' - 'Toolbar' - 'Restore Defaults' - and 'Done '. This will reset all the tools at the appropriate position and the "crop tool" re - appears where it is supposed to and the "corrector".
Yes. It's exactly what I told you in the _identical_ of _other_ thread that you started with this question. It's just one of the reasons why it isn't a good idea to start multiple threads. I locked this thread, but one of the other moderators of the forum has been deleted.
-
Hi all
I found that it is more difficult to explain than I thought
I don't like the new behavior in the latest version of Photoshop (CC 2015.1) regarding the way in which the background layers automatically unlock and convert to regular layers after using the crop tool. It's completely different to how things worked in previous versions, where a background layer remained in locked state flattened after using the crop tool.
I get a LOT of images and this change has added an extra step to each image that I harvest, because I flatten the layers after cropping before saving the image. I looked through the preferences but cannot find a way to change this new behavior. Am I missing something?
Thanks in advance for your help
See if checking Delete the cropped Pixels in the tool options makes a difference.
-
develop signs 2015.2.1/ Lightroom CC mode not to expand or to collapse/also straighten rule hit and miss out on the crop tool ~ any suggestions?... it's also very very slow! ~
We just released 6.4/2015.4 Lightroom that fixes Lightroom 6.3: problems with crop rotation / & Nikon question attached with Lightroom running on Mac OS 10.11.
Please see Lightroom CC 2015.4 / 6.4 available
Kind regards
Mohit
-
Hello, my name is Todd, I recently downloaded PS CC 2014. I've used PS for decades. The crop tool will show the bar of progression, and to 25%, that it will stop completely, even on VERY small 72 dpi images. What can I do? Thank you!
Double check all settings in the crop tool and make sure that you are not say things to create an image of HUGE due to your settings.
-
The crop tool causes Photoshop CC hang up. I have to use CS6.
I can't use the crop tool in Photoshop CC.
I just cropped my profile picture and crop tool now works normally.
-
Using the crop tool to straighten an image twisted?
In CS6, I have an image that has been analyzed in and which is twisted. I use the crop tool to drag the landmarks of crop around the part of the image that I want to keep and I press the check mark to make the harvest. It crops the image so it does not straighten. In earlier versions of Photoshop it to crop and straighten the image cropping. How to now use the crop tool to straighten a picture?
Thank you.
Here's how:
1. click on the ruler (straighten) button
2. the cursor changes to a symbol of the culture to a leader
3. click and drag a line where you want the picture to the right, and then release the mouse button.
4. image is recovering, the cursor turns into adjustment handles.
5. making adjustments to the acreage. Press Enter to save the changes.
-
How to use the crop tool without losing pixels?
5616 x 3774 / res 72, is what CS5 says my Canon 5 d 2 large jpeg is off camera.
Can I use the harvest too to make a picture of 20 "x 24" and keep all or most of these pixels? "
Leave the area blank resolution?
The lab I send the file to print, said they want 300 res files (just to complicate the thing a little more)
Thank you!
To tell the truth I do not use the crop tool. I use the selection Rectangle, crop image tool and the size of the image. If you use the crop tool and fill a field of resolution in the crop tool crop tool makes all three operations including the harvest to the resolution that you have entered the resampling. Adobe also gave the crop tool implemented in CS6 that a lot in my arms. Don't mind at all.
IMO if you use harvest its best tool to fill the field of the resolution. In this way the harvest will not resample. You can enter height 24 20 width or height width 6 5 in fact the same proportions as it is 12:10
After you do the crop you can use the size of the Image. In the dialog box uncheck resample set the width for printing on 24. You'll see Photoshop set a height 20 and set the resolution to a certain value. If the fall of DPI value below what you want check resample together in the desired resolution and interpolation method to use and then click OK.
-
Using the crop tool to remove unused pixels or the artboard
I have a cut picture, I placed a drop shadow (using the layer styles) on a transparent background. I want to quickly use the crop tool to remove unused pixels or the artboard.
I tried to enable 'show the edges of the layer', but it ignores the layer style/shade that I placed, and as it disappears when you start using the crop tool itself. If this does not really work.
Is there another way to do this? Other than the eye it? I too want to crop the image as tight as possible, but I don't want tight, too tight and cut off from the shadow. Any advice? Thank you!!
Try Image - Trim function. I think it will do exactly what need you.
-Christmas
-
What happened to the point of VIEW when I use the CROP tool?
What happened to the point of VIEW when I use the CROP tool?
Hold the crop tool in the toolbar - you will find culture seen as a tool of void
Maybe you are looking for
-
I want the dock to stay on a single screen however I want to keep active separate spaces I like how windows behave better display in this mode. It's very embarrassing for the docking station edit screens when the mouse is near the bottom of the scree
-
Satellite P10-304 power until now
Hello Got the machine Satellite P10-304, which won't turn on after the 2nd attempt. What happened: -. Machine power of cold - booted Windows XP ok start. After 5-10 minutes, the machine screen is dimmed (resembles backlight is gone) and couldn't turn
-
I want to install the audio beast after I put windows 7-profetional. How can I do? I have hp pavilion dv 6 with windoas 7 Home Edition.
-
After the updates of this week, the system will not load anything.
-
PLR of Windows Media. crashing
I recently had a problem with "you tube". Whenever I have expanded the video clip in full screen, my PC crashed. I have now overcome this problem by right-clicking on the video clip, selection of the parameters in the menu and unchecking "remove hard