Whenever my id of disconnection after system reboot

Similar Questions

• Windows not loading after system reboot after installation of the last security update.

  Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.

  No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.

  Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.

  Dated this February 11, 2010.

  I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.

• theme reset after system reboot

  I can't seem to get my windows xp theme remaining after a system reboot, or get windows actually restart after selecting "reboot" menu so that maybe that's...

  Anyway, I don't like on the reboot problem. I want to just that my theme to stay put rather that to reset in drilling nothing mode blocks square, Matt gray stuff that are the norm.

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. Looks like the theme is getting the changes after each reboot.

  Follow the given steps and check with the question.

  Restart the Service of theme Services

  1. click on Start, click run, type services.msc and click OK.
  2. double-click on themes

  service.and then click Properties.
  3. on the general tab, click Automatic in the list Startup type .
  4. on the general tab, click Start under Service status, and then click OK.
  5. close Services.
  Restart the computer and check.

  Hope this information helps. Please reply with the status so that we can help you.

• Index of physical memory SNMP oid has changed after system reboot

  I asked for a hot - difficulty for windows 2003 server. Server must be restarted after you apply the hotfix to hot. After the reboot, I noticed this index of oid snmp for physical RAM increased from 17 to 16. is this normal behavior for snmp to change the Index oid?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums on TechNet. Please post your question in the Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows running in the backup drive D: after system reboot

  I rebooted my system yesterday and discovered that it had been done in the backup drive D which has only 1 g backup space. I can't do another reboot because there is no space in the drive.

  My question is: A) how to get the operating system to run on the main C drive

  (B) I'll be able to remove the old operating system to drive D

  Dell XPS 1530

  Vista 32 bit

  Any help is greatly appreciated, thank you

  Delete older backups and free up space on the D drive.

  To remove old backup files, under the backup of data files, click View backups.

  You can then select the backups of files that you want to delete, which will free up disk space. Remove an entry in the list will not affect the other backups. If you think that you don't need one version of your files from a certain backup period, you can delete that backup. We recommend that you always keep the most recent backup.

  For more information, take a look here: http://windows.microsoft.com/en-US/windows-vista/Back-up-and-restore-frequently-asked-questions

  The man likes to play chess; Let's get him some rocks

• No sound after system reboot

  won't help.

  my sound on my computer used to work. but currently, the sound was very quiet even when it is full volume. now no sound speakers. I tried to use headphones in the computer, but it was the same thing. Ive tried uninstalling and renstalling the hard drive but nothing has changed. It happened after we did a complete remission to zero of the system. any ideas on how to fix it?

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for the latest Audio from Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• ColdFusion service starts do not after system reboot

  After you restart the server today, coldfusion employment service could start server.

  I tried to restart it manually through component services, but he did not.

  There is no newspaper in C:\ColdFusion11\cfusion\logs.

  Message in the Windows system log is:

  Log name: System

  Source: Service Control Manager

  Date: 01/09/2015 01:59:12

  Event ID: 7024

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer: reports

  Description:

  11 ColdFusion application server ended with the following special service error:

  The system cannot find the specified file.

  The event XML:

  "< event xmlns ="http://schemas.microsoft.com/win/2004/08/events/event">."

  <>System

  < provider name = Guid "Service Control Manager" = "{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName = "Service Control Manager" / > "

  < EventID = "49152" > 7024 qualifiers < / EventID >

  < version > 0 < / Version >

  < niv.2 > < / level >

  < task > 0 < / task >

  < Opcode > 0 < / Opcode >

  < Keywords > 0 x 8080000000000000 < / keywords >

  < TimeCreated SystemTime = "" 2015-09 - 01 T 08: 59:12.335662300Z "/ >"

  < EventRecordID > 37578 < / EventRecordID >

  < correlation / >

  < execution ProcessID = "664" ThreadID = "4220" / >

  System of < channel > < / Channel >

  < computer > description < / computer >

  < security / >

  < / system >

  < EventData >

  < data name = "param1" > Application ColdFusion 11 server < / data >

  < data name = "param2" > % / data >

  100740069006F006E0020005300650072007600650072000000 < binary > 43006F006C00640046007500730069006F006E0020003100310020004100700070006C00690063006 < / binary >

  < / EventData >

  < / event >

  Message in the application log:

  Log name: Application

  Source: 11 ColdFusion application server

  Date: 01/09/2015-02:13:23

  Event ID: 259

  The description of 259 Application ColdFusion 11 source server event ID is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  11 ColdFusion application server

  the message resource is present, but the message is not in the string/message table

  < name provider = "Server applications ColdFusion 11" / >

  < EventID = "49153" > 259 qualifiers < / EventID >

  < Keywords > 0 x 80000000000000 < / keywords >

  < TimeCreated SystemTime = "" 2015-09 - 01 T 09: 13:23.000000000Z "/ >"

  < EventRecordID > 11826 < / EventRecordID >

  Application of < channel > < / Channel >

  < / data >

  ColdFusion 11 < data > application server < / data >

  < / EventData >

  < / event >

  Please suggest the solution that I couldn't find much on the web.

  update the following to correct file java House solved the problem.

• Tablespace TEMP wash after system reboot

  I have problem with tablespace TEMP blocked about 12 g. I does not change, no matter what is happening on the system.
  
  I guess the TEMP tablespace is to store temporary data but, even after I database is arrested and put into service these 12 G are still there.
  
  Any idea?
  
  
  Linux x 86
  Oracle 10.2.0.1

  This isn't a bug, but the expected behavior. Segments in temporary tablespaces are not erased, but ready to be crushed by the new temporary data. Only solution is set as temporary tablespace default and create a new temporary tablespace. Later, you can remove the old TEMP.

  Werner

• Some ESX4 configurations are lost after the reboot of the system

  Hi people,

  I use ESX4 server for months.

  Lately, after creating a few Pools of resources (RP) and the addition of virtual machines in the pool, I noticed that after rebooting my system, I lost all the Resource Pools, I created.

  This problem of loss of configuration is not only limited to the RPs, I also lost some of the configurations of the network/portgroup after system reboot.

  This problem is is produced as well when I entered "Maintenance mode" and then then rebooted the system;  and also when I typed the command "reboot" in the bash shell (I typed 'reboot' command 'sync' several times before typing.)

  This problem becomes a kind of annoyance since I have to re-create the lost configuration each time that I reboot.

  Is it possible to manually force the ESX4 to save the configuration for that I do not keep losing part of my configurations?

  Could someone please help?

  Thanks in advance.

  Danny

  Really glad its sorted for you, as I said, I saw the question before at a customer's site and you will never know that the root is full, except if you look in the service console. It would be good to have this visible through the vi client, but in the meantime it just added monthly controls!

  Thank you

  Dan

• Whenever I go into emails, after the opening of two or three I have thunderbird no longer responds. (Operating system for several months) CAUSE: unknown. Disappeared after the reboot.

  As stated in my question, that this is the case whenever I open emails. After opening with two success or three, I get the message not responding when I try to open the following. This has happened for a long time and is very frustrating.

  Hi Wayne. Thank you for answering my question. I said, that your answer is not

                    solve my problem because I couldn't understand what any of it meant. We usually leave our computer on all the time and a friend who is more savvy than I suggested we turn it off for a while. This seems to have worked.
                            Cheers.   Stephanie.
  

• After 13 updated both the system rebooted and now as he begins to install XP it autorestarts. It will not recover to the last known good config and delivers a message of corrupted config file.

  Any ideas?

  Thank you

  Frank

  You will share exactly what the message of the corrupt config file says?  My crystal ball takes off the second Wednesday of each month.
  If your system reboots continuously, the next time the system reboots, start tapping the F8 key until you see the menu Boot Options Advanced XP.  On the Advanced Boot Options menu, select:

  Disable the automatic restart in the event of system failure

  This will display the error message that you don't see when the system restarts.  This is what Windows is supposed to do when there a failure - it is supposed to automatically restart.  The error you see on the screen has your clues...

  If you do not see the menu Options start Advancded or you do not have to turn it off automatic restart on option system in the list of choices, you need to try again until you do.  Start typing the F8 key earlier and more frequently as your system begins to come alive.  If you miss the window of opportunity F8, you must try again.
  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)
  ?
  Most of the time (in recent memory) when there is a problem after installing Microsoft updates, the problem is because the computer was somehow afflicted before/when updates have been installed and updates simply bring to the surface a problem that was not evident before.
  If the last thing people remember is to install the updates from MS, it's am understandable reaction in some way involve updates for updating the post problems when things don't work properly afterwards and especially during the next reboot.
  Another reaction is to try to remember all of the updates you have installed and somehow uninstall the updates one of the XP Recovery Console until you find one who is 'responsible '.  Unless you noted all issues of update, it would be more difficult, but not impossible.  It is unlikely that practical or useful advice in most situations, but you can of course try it.
  Security updates sometimes holes patch XP and when security holes are patched (and XP is "tighter"), affliction can no longer do what is done, things to happen are no longer allowed to happen as a result of the strengthening of security, the system has now a new problem (especially when it initializes more) , and it seems that install updates broken system while in fact, it's just a coincidence.
  Another thing that can happen is that the Microsoft updates will change or update certain critical files on the XP system.  Depending on what your software antivirus or antimalware software is, these programs can interpret the new or updated files to day as being a threat or somehow infected and quarantine (effectively delete) files it thinks are wary.
  The next time you restart your system, you'll have some sort of a problem, or you do not start if the files are missing.  Once more, the problem is not with the updates, it's another condition on your system with your antivirus or antimalware programs you beautiful little (they could be aware of what like the new look of Microsoft files).
  You may have seen some or heard talk about some of these kinds of people, but not too intellectually stimulating general or scenarios of error after update:
  NTLDR is missing or corrupt, ntdetect.com is missing or damaged, ntoskrnl.exe is missing or damaged, hal.dll is missing or corrupt, etc.
  These types of errors are usually very easy to fix, but if you don't know what's happening, the temptation is to do a repair installation, or if none of these kinds of things are really necessary, completely reinstall your XP.  I have never done a system restore, a repair install or reinstalled XP in my life to solve any problem (but I did the process for practice).  These things are simply not options with me.
  Given that Microsoft sends many updates on the second Tuesday of each month (they call it "Patch Tuesday"), this means that the or to the second Wednesday of each month there is an increase of 'problems' in the field - in particular the types of problems "my computer does not start after you install the updates from Microsoft.  That day is also known as "exploit Wednesday".
  You can read about it here: http://en.wikipedia.org/wiki/Patch_Tuesday
  It is likely that if you have a problem like this or after the installation of MS updates, someone else has also had the same problem and understood what to do about it.  A problem here, is that no one knows what is your problem.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• G560 - network disconnected after waking up from hibernation

  During the last two days, my laptop Lenovo G560 (running Windows 7, 64-bit, BIOS 2.10) has had problems with its (wired) network card after waking from hibernation. It is shown as disconnected (even as if the cable was physically detached). The only big change I played in the last few days has been installed Service Pack 1. However, the problem only appeared about two days after, so I don't know if this is related at all.

  In this case, IPCONFIG shows the following for the NETWORK card:

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  If I try IPCONFIG/renew, I get

  Windows IP configuration

  No operations can be performed on the connection to the Local network, although it has its media disconnected.

  Hovering over the said tray icon "not connected". Troubleshooting of course can't find anything. Also, there is no weird in event viewer entries (unless they are hidden somewhere in other modes). Basically, the behavior is identical to when the network cable is physically disconnected (disconnected).

  In addition, disconnect the network cable, wait a few minutes and in him plugging back again once does nothing.

  For now, I have two workaround solutions:

  -system reboot

  -right click on the connection to the Local network (in network connections), select DISABLE from the menu, wait a few moments and then choosing the option ENABLE on the shortcut menu.

  Is there a better solution to this? Speculation on what might be the reason for this problem all of a sudden?

  Right click on my computer > manage > device management > network cards > select wireless adapter > properties > under power management tab, clear the check box to be able to save "allow the computer to turn off this device to save power".

  Restart your computer and check if it works.

  Please post back with the results.

• Whenever I have shut down my system, I get an error of "nlsphelp.exe".

  Original title: nlsphelp.exe

  Whenever I have shut down my system, I get an error box "nlsphelp.exe". What can be done to fix this?

  See you soon

  The nlsphelp.exe has nothing to do with a virus.

  It's the NetLib SQL Service Helper Service (not found on a general XP installation).

  Now you or you already had versions of SQL Server installed on your system of unspecified of brand and model with the unspecified XP version and Service Pack?

  If not, it may belong to a third-party application you have installed or it might be some something remains either of something that you have uninstalled before this incident.

  If you are not sure whether you need it or not, click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet and locate the assistance of NetLib SQL Service Pack Service, right click, properties and after making a note of the current startup type, set the startup type to "Disabled", reboot, run for a while and see how things work without it.

  If you find things that don't work without it running, set the startup type to what it was before and pick up another idea.

  Is it your desire, you can also delete the Service completely so that you will never see it again.

• Dell V313 does not print after system restore

  My apologies if I should have posted this elsewhere.

  I have a printer all-in-one Dell V313, using Windows 7, 64-bit. I really like the printer.

  I used the "remove IE11 update' to good use, and he continued to print well for about a month, until...

  My father ran a system restore point to solve another problem, and now I can print is no longer. DOH!

  I moved that pesky IE11 updated again, but this does not solve the problem.

  When I "Launch Dell printer at home", instead to open the main menu, a dialog box pop box, asking me if I want to open, save, or cancel the download to a temporary file named "DSX # .tmp", where # change every time.

  I opened it with notepad and this file seems to contain a rudimentary version of this main menu, but of course it is not interactive. (The home Dell printer menu is never responsible.)

  Another interesting note is that when I print something (does not seem to matter what program), the printer status area is not - what appears instead is a html file called jswdialog.html. This file is apparently empty.

  I made Java and run-time environment has been updated, just in case. I tried to remove all traces of the printer (by removing prints, queue, stop/print spooler, printer, uninstall drivers uninstall from compensation), and reinstall everything from scratch, right down to the firmware of the printer, but nothing will print when I ask him.

  Instead, it adds the work in file print, which then comes out after a reboot.

  The scanner function works of the printer itself, although this menu of the printer on the Dell home page will not start.

  Any suggestions? I must be missing something, but I don't know what. My last resort is to reinstall Windows, or reset whenever I want to print something, but I'd rather not.

  Thanks for reading,

  Matt

  Matt,

  Try these teak and see if it prints. If it's not I can guide you reinstall the printer, but printing or tasks that can be frozen in the queue will need to be removed or the problem would remain.

  Start, Control Panel, Manager of devices.

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  --------------------------------------

  Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

  Rick

• Downloaded Windows 10. Yet, after each reboot, windows 7 restart... no windows 10?

  Original title: Windows 10

  I have a laptop with windows 7 installed. I ran a few the applet to see if the laptop is eligible. He did, and I see the windows icon 10 appearing in the task bar. I click on it to get the upgrade and windows starts the download process. Then after it is downloaded double click on the file and it seems to be the installation. This seems to go to the end and I restarted several times when asked to do so.

  Yet, after each reboot, windows 7 restart... no windows 10.

  Review:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).