where can I report a problem with a virtual machine died, which I can't save now?

Similar Questions

• Is that a catastrophic problem with BootCamp / virtual machines or something else?

  Just had a catasrophic with BootCamp problem

  My MBP was running a bit lazy, so Apple gave me a few instructions on how to fix this, including linking the installation discs for the disk utility and empty all of my folders cache under OSX.  Don't know if any of this slow and crashing was something to do with the installation of the latest update to OSX

  All of a sudden when I came back to Windows in the usual manner, the installation of windows in the VM required activation. Needless to say I had to activate windows every time I spent Bootcamp in OSX and/or then the merger to get to Windows, I had to re-activate so finally that Microsoft is beginning to think that someone is to install Windows on multiple computers and telephone activation becomes a nightmare.

  But even worse, when I managed to understand what product key that I used for bootcamp and started windows, EACH CONFIGURATION MADE OVER A YEAR or so AND EACH SOFTWARE INSTALLATION HAD DISAPPEARED, I HAD!  Without a windows installation process, I've been frame with a soft-install windows desktop with all my lost favorites. Leading to an even bigger nightmare in the re-installation of hundreds of evidence hours of software.  He had two meager records to show that I was in the right place and that everything is not contained in another folder and a file or two, but I wonder if all these installation information is contained in a cache in the directory structure Active Directory OSX? If so, is it possible to identify the files or the folders in which cache directory must be saved?

  If this is the case, I never dreamed that something to do with the windows installation was contained in the OSX directory structure?  Surely if this is the case, there should be a strong warning on it?   Admittedlythe Windows Setup WAS a bit slow before the "incident", but I doubt that there is something deeply wrong, and in any event I ran just a fully updated Adaware and Spybot so this problem is probably not a virus. (I don't use email merge)

  If this is the case, is - can anyone identify records needing backup before you empty the caches under OSX?  I don't think THAT many here would have been recovered by the take a snapshot could it? (anyway, I could not in windows without this activation)

  FWIW, the only way I can see what is a matter of merger is if by chance you're under Fusion 2.0.0, which had a fatal flaw it would partition Boot Camp Virtual Machine to take a snap, and if you did not start in native mode again you probably will not notice immediately that all changes have been written in a disc rather than the disc file physics itself and then if we deleted the virtual Boot Camp Machine partition a situation such that you described could have similar results.

  Another thing to look at is C:\Program Files in the Windows directory and see if it contains all the applications you have installed once and if she doesn't then it's quite possible that you run Windows from a default registry hive, which of course contains no information on changes since Windows has been installed but you have really not provide adequate details on what you were in fact under the leadership of Apple technology to get where you currently are, so there is not much that I can offer.

• Problem with initialization virtual machine OlioDB

  Hello

  I have been using VMmark 2.1 six months spent for our performance appraisals. I recently started seeing the following error message when the harness trying to boot the virtual machine OlioDB0:

  Stafcmd: Tile0: FS copy the file: ConfigServer_OLIOjspDB.sh failed with RC = 22, STARFResult = STAFConnectionWriteUInt: error writing to the socket: send() RC = 10054:22

  I can ping the virtual computer, I can also ping using STAF (oliodb0 STAF-> pong ping ping).

  If I change the WORKLOADLIST in the vmmark2.config file so that it includes OlioDB, initialization is going through and I can see the virtual machine making initialization. But when WORKLOADLIST revert to the original, I get the above error message. I would appreciate your help to try to solve the problem.

  Thank you

  Amin

  Sorry, my apologies, I understood the question. I had another copy of the same virtual machine running on a separate server, which caused a conflict of IP address with the main VM that the test sought to initialize. I got rid of the copy and everything started to work very well.

• problem with VCB virtual machine identified by < unset > is unknown

  Hello

  I have three ESX 3.5 in a cluster with an EVA SAN. When I do my backup, I get this message for some of my virtual machines. The majority of my backup work well...

  PrepareForBackup() could not prepare TermServer for backup, returned the error 16

  The virtual machine identified by & lt; unset & gt; is unknown.

  Exit code: 16

  Pre order is: "C:\Program VMware Consolidated Backup Framework\backupexec\Green-pre-backup.bat" green-Termserver TermServer - fullVM

  In Virtual Center, the name of the virtual computer is TermServer, the folder on my SAN is TermServer and all files, named according to the name of vm, have 'TermServer' in their name.

  Any idea?

  Hello

  I think that you have a DNS problem, you use - ipaddr in config. file for VCB?

  Try ping TermServer, you can resolve the name?

• strange problem with a virtual machine in VC2.5 U3

  Hello

  situation looks similar to the following: we followed ping IP of the VMS system. If the IP does more (stop the VM, NIC, IP conflict or other problem), then monitoring sends an sms to the mobile.

  There is a virtual computer, lets call him VM1 that runs all the time (well - he was responding to pings, because any sms received, but we do not know if it worked ok, fair pings were OK). And suddenly, Monday morning, we got SMS that VM is offline (no ping response). If my colleague entered VC and saw that this virtual machine has been powered down. He put on this virtual machine, and he started working (operating system and also pings).

  And now we know what happened. In VC, when I go to the tab events and tasks VM, I see in TASKS 2 inputs display: 4.06.2009 - Migration between hosts caused by the DRS (COMPLETED), and the 29.06.2009 to power on a virtual machine (by my colleague). There is no task displayed between this period on the performance tab, just take a peek. He has failed on performance since May (until the 29.06). I do not know if this worked well (we not only got all the warnings, the pings are bad). So I am confused - where looking for this first cause?

  Second question, I have seen events spammed by custom attributes (take a look). How to get rid of it, or is it possible to browse this VM events history?

  Is it possible to confirm what really happened to this virtual machine?

  You can try to search in VC Journal, ESX and VM logs.

  But could be a very long job...

  André

• VMware Workstation with ESX3.5u4 - problems with the virtual machines within ESX3.5u4

  Hello world

  I really need a consultation on this one:

  I'm testing ESX3.5.

  As I don't want to buy any material for now I thought it would be a good idea to test ESX3.5 in my computer.

  I used this model to install ESX3.5 in my computer: http://xtravirt.com/node/100

  ESX3.5 works perfektly in workstation.

  The only problem is that if I create a computer virtual within the VM ESX3.5 works very very slow.

  I searched on the VMware Forum for this problem and found that you need Intel VT enabled to speed things up.

  But I think that my "Intel (r) Core (TM) 2 Quad CPU Q9300 @ 2.50 GHz, 2000 MHz" should have Intel VT.

  Does anyone have any ideas why my VMs on esx3.5 within the short slow workstation?

  Thank you all in advance for the help!

  Material used:

  ASUS P5B

  Intel Quad Core Q9300

  3 GB RAM

  Intel PRO/100 S-Serveradapter Ethernet

  According to your log file, the external VM using VT - x.  I'm afraid, it's as fast as your nested VMS are going to get.  While I would qualify as slow or even nested VM performance very slow, I'm not sure I'd go so far as "very very slow."  It is perhaps a matter of perception.

• I had many problems with the first cc 2014 so I reinstalled it and now it says that I can not open my project because it was recorded on a newer version. Is there something I can do?

  I had many problems with the first cc 2014 so I reinstalled it and now it says that I can not open my project because it was recorded on a newer version. Is there something I can do?

  Hi Gemma,

  It seems that after reinstalling, Premiere Pro no has not been updated to the latest version. Check your application creative cloud for updates. If she says Premiere Pro is up to date, try to update Premiere Pro through help > updates... option in Premiere Pro.

  Thank you

  Regalo

• With the help of gsoap/C++ web SDK problem reconfiguring the Virtual Machine

  Hi all, I m using gsoap/C++ with web service sdk to monitor virtual machines.

  I m able to enumerate the current list of virtual machines, total number of vm. Now I m trying to reconfigure the virtual machine. My Code snippet is as below.

  The virtual machine is running and I m trying to change the ram, I did it using java api and it doesn't butfor c ++ it is in error.

  ns1__VirualMachineConfigSpec vmSpec;

  ival long 64;

  vmSpec - & gt; memoryMB = & ival;

  ns1__ReconfigVMRequestType reconfigVMRequestType;

  reconfigVMRequestType.spc = & vmSpec;

  reconfigVMRequestType._USCOREthis = vmObject - & gt; obj; managed object - virtual machine

  NS1_ReconfigVM_USCORETaskResponse reconfigVMResponse;

  ns1__ManagedObjectReference * morResult = 0;

  If (vim - & gt; __ns1__ReconfigVM_USCORETask (reconfigVMRequestType, & reconfigVMResponse) == SOAP_OK) {}

  morResult = reconfigVMResponse.returnval;

  } else cost & lt; & lt; "Unable to machine virtual reconfig." & lt; & lt; ENDL;

  Now in vSphere Client it show me error like.

  The operation is not supported on the object.

  And on server esxi in file /var/log/vmware/hostd.log it not show gives following error.

  The task was created: haTask-32 - vim.VirtualMachine.reconfigure - 1422

  2009-08-26 20:54:17.669 verbose 149A5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Reconfigure: (vim.vm.ConfigSpec) {}

  dynamicType = & lt; unset & gt;

  changeVersion = & lt; unset & gt;

  name = & lt; unset & gt;

  version = & lt; unset & gt;

  UUID = & lt; unset & gt;

  instanceUuid = & lt; unset & gt;

  npivWorldWideNameType = & lt; unset & gt;

  npivDesiredNodeWwns = & lt; unset & gt;

  npivDesiredPortWwns = & lt; unset & gt;

  npivTemporaryDisabled = & lt; unset & gt;

  npivOnNonRdmDisks = & lt; unset & gt;

  npivWorldWideNameOp = & lt; unset & gt;

  locationId = & lt; unset & gt;

  ID = & lt; unset & gt;

  alternateGuestName = & lt; unset & gt;

  annotation = & lt; unset & gt;

  files = null (vim.vm.FileInfo),

  Tools = null (vim.vm.ToolsConfigInfo),

  Flags = null (vim.vm.FlagInfo),

  consolePreferences = null (vim.vm.ConsolePreferences),

  powerOpInfo = null (vim.vm.DefaultPowerOpInfo),

  numCPUs = & lt; unset & gt;

  memoryMB = 64,

  memoryHotAddEnabled = & lt; unset & gt;

  cpuHotAddEnabled = & lt; unset & gt;

  cpuHotRemoveEnabled = & lt; unset & gt;

  cpuAllocation = (vim. NULL in ResourceAllocationInfo),

  memoryAllocation = (vim. NULL in ResourceAllocationInfo),

  cpuAffinity = null (vim.vm.AffinityInfo),

  memoryAffinity = null (vim.vm.AffinityInfo),

  networkShaper = null (vim.vm.NetworkShaperInfo),

  swapPlacement = & lt; unset & gt;

  swapDirectory = & lt; unset & gt;

  preserveSwapOnPowerOff = & lt; unset & gt;

  bootOptions = null (vim.vm.BootOptions),

  vAppConfig = null (vim.vApp.VmConfigSpec),

  ftInfo = null (vim.vm.FaultToleranceConfigInfo),

  vAppConfigRemoved = & lt; unset & gt;

  vAssertsEnabled = & lt; unset & gt;

  changeTrackingEnabled = & lt; unset & gt;

  }

  2009-08-26 20:54:18.122 149A5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' State Transition (VM_STATE_ON - & gt; VM_STATE_RECONFIGURING)

  2009-08-26 20:54:18.125 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Memory hot asked.

  Load: Existing file loading: /etc/vmware/license.cfg

  2009-08-26 20:54:18.139 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Verified hot license

  CloseSession called for the session id = 52f7f6aa-3ef8-c52a - 815 a - 75B 421405075

  Event 714: Root user is disconnected

  ERProviderImpl & lt; BaseT & gt; : _GetChanges: version 32 overflow name aggregation

  ERProviderImpl & lt; BaseT & gt; : _GetChanges: aggregate the version 32 overflow triggeredAlarmState

  2009-08-26 20:54:18.979 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Current state of the VM management: disabled

  2009-08-26 20:54:19.071 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Implementation State of follow-up to the virtual computer for people with reduced mobility.

  Ability to root pool has changed to 1104 MHz / 521MB in 1104 MHz / 520MB

  2009-08-26 20:54:21.108 703F5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Remove hot memory not supported: newMemory: 64, curMemory: 128

  2009-08-26 20:54:21.110 703F5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Batch hot failed during the application of the individual changes.

  2009-08-26 20:54:21.113 703F5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Reconfigure is not

  2009-08-26 20:54:21.114 703F5B90 warning ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Exception that is thrown when the statement reconfigures: {(vim.vm.ConfigSpec)

  dynamicType = & lt; unset & gt;

  changeVersion = & lt; unset & gt;

  name = & lt; unset & gt;

  version = & lt; unset & gt;

  UUID = & lt; unset & gt;

  instanceUuid = & lt; unset & gt;

  npivWorldWideNameType = & lt; unset & gt;

  npivDesiredNodeWwns = & lt; unset & gt;

  npivDesiredPortWwns = & lt; unset & gt;

  npivTemporaryDisabled = & lt; unset & gt;

  npivOnNonRdmDisks = & lt; unset & gt;

  npivWorldWideNameOp = & lt; unset & gt;

  locationId = & lt; unset & gt;

  ID = & lt; unset & gt;

  alternateGuestName = & lt; unset & gt;

  annotation = & lt; unset & gt;

  files = null (vim.vm.FileInfo),

  Tools = null (vim.vm.ToolsConfigInfo),

  Flags = null (vim.vm.FlagInfo),

  consolePreferences = null (vim.vm.ConsolePreferences),

  powerOpInfo = null (vim.vm.DefaultPowerOpInfo),

  numCPUs = & lt; unset & gt;

  memoryMB = 64,

  memoryHotAddEnabled = & lt; unset & gt;

  cpuHotAddEnabled = & lt; unset & gt;

  cpuHotRemoveEnabled = & lt; unset & gt;

  cpuAllocation = (vim. NULL in ResourceAllocationInfo),

  memoryAllocation = (vim. NULL in ResourceAllocationInfo),

  cpuAffinity = null (vim.vm.AffinityInfo),

  memoryAffinity = null (vim.vm.AffinityInfo),

  networkShaper = null (vim.vm.NetworkShaperInfo),

  swapPlacement = & lt; unset & gt;

  swapDirectory = & lt; unset & gt;

  preserveSwapOnPowerOff = & lt; unset & gt;

  bootOptions = null (vim.vm.BootOptions),

  vAppConfig = null (vim.vApp.VmConfigSpec),

  ftInfo = null (vim.vm.FaultToleranceConfigInfo),

  vAppConfigRemoved = & lt; unset & gt;

  vAssertsEnabled = & lt; unset & gt;

  changeTrackingEnabled = & lt; unset & gt;

  }

  vmodl.fault.NotSupported

  2009-08-26 20:54:21.177 703F5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' State Transition (VM_STATE_RECONFIGURING - & gt; VM_STATE_ON)

  2009-08-26 20:54:21.180 703F5B90 warning ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Authentication data that are not available during activation

  Event 715: Reconfigured Win Vista on kudosiesxi118 ha-data center

  Change of State received for VM ' 32 "

  2009-08-26 20:54:21.598 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Time to pick up some config: 415 (MS)

  Task completed: error status haTask-32 - vim.VirtualMachine.reconfigure - 1422

  Add vm 32 to poweredOnVms list

  2009-08-26 20:54:21.694 703F5B90 warning ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Reconfigure the worker thread failed

  Problem in the virtual machine is in the power on State or I m doing something wrong?

  Can any body tell me where I m wrong?

  Rather than use a C string, try using the String object.  In my C++ sources generated the WSDL, the expected properties are string objects and references to string objects, not strings C.

• How the physical machine can communicate with the virtual machines as well as the internet should work on a virtual machine

  Hi team,

  I ask that you forgive for asking a silly question without doing a free search.

  I'm using VMware workstation 6.5. I am able to communicate with both machines by selecting 'only option of home. "

  Is there a way by which the physical machine can communicate with the virtual machines.

  At the same time through the VMS, is it possible to access the Internet from the physical amchine.

  Help, please.

  Concerning

  Sriapti

  When you use a bridged vNIC the customer acts as any other host, so that you can access is by his IP (or name if a DNS configuration exists as you acceding to any other host.) What tools you can use depends on the guest operating system and the software available.

  I assume you mean access deskopt. Then you can use RDP (Windows Terminal services) or VNC (tight/tiny).

  For Linux, you can use this last or all the flavors of SSH. In the case of Linux, I use VNC through SSH tunnel. You can also tunnel X through SSH, so if you have an X server on another host (such as the Hummingbird for Windows), you can open your own office remotely there.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• How to share a USB with a virtual machine raw device?

  Hey,.

  I have a TEMPer PCSensor USB device I want to share with a virtual machine.

  When he connect on my MacBook, I see it as a USB device in System Profiler as shown here:

  

  The problem is that there is no OS X driver that is appropriate for that. So while it has detected the USB device and read data from string device, Snow Leopard is not actually load anything to support this material. This means, in my view, that he does not see merger as a USB device is valid to be shared with the virtual machine.

  

  Does anyone know how to force the merger of share this USB without driver with the virtual machine please? The VM knows EXACTLY what to do with this device.

  Thank you

  Tom

  ---

  VCP, VCI, MBCS CITP

  If System Profiler can see the USB device, it should appear in the list of devices that can be connected to a virtual machine. The only exception is if it is a HID-class, which are automatically filtered device. See USB HID the User Guide running A VMware Fusion for an explanation and a workaround.

• Problem migrating a virtual machine

  Hello!

  I have a problem when I try to migrate a virtual machine to the concrete only two hosts. I have no problem in other guests in my infrastructure. When I try to start this operation I get the following error message: "cannot migrate from esx1.domain.com to esx2.domain.com: the host CPU is incompatible with the function CPU requirementes of the virtual machine; problem detected the CPUID level 0 x 80000001 register edx.

  With other virtual machines, I have no problem and I can migrate from any host to any of them.

  Hi Eric,.

  Please check this link below:

  http://KB.VMware.com/selfservice/viewContent.do?externalId=1001131&sliceId=1

  Seems to be the answer to your problems.

  Please give feedback if this solves the problem

  Concerning

  If you find this or any other answer useful please consider giving points by checking the answer useful or appropriate.

• Find all the unique ID associated with a virtual machine

  is there some sort or any command that I could find all the unique ID associated with a virtual machine?

  I mean like ID: ID hardware, CPU ID, UUID, MAC address and etc...

  This should help you

  https://psvmware.WordPress.com/tag/VM-UUID/

• Accidentally, I put my virtual machine - Windows 7 - 4 MB RAM, and now I can't load and stop it!

  Accidentally, I put my virtual machine - Windows 7 - 4 MB RAM, and now I can't load and stop it!
  My Windows 7 virtual is stuck in start mode of Windows, but not I can't start it, nor can I stop to change the RAM to return to normal. Help! What can I do now?

  I use Macbook Air if it is useful and WM ware Fusion 6.0.3

  Hi Requiem88,

  Just to be clear, you press the Option key on the keyboard key then went in the Virtual Machine menu at the top of the screen and choose Force Shut Down who?  Looks like you force quit in the menu Apple have rather choose.  Force quit will put end to VMware Fusion, while the option Force stop menu stop permanently from Windows itself.

  See you soon,.

  --

  Darius

• I am owner of a mini iPad (MD528LL/A, s/n F4LKQ4N7f193), that I use mainly for the practice of music (iRig); can I upgrade to 9.2.1 and use new apps music?... I read where there are a few problems with older devices!

  I mainly use for music practi

  There is nothing wrong with this update.

  This update is designed to fill a long-standing security hole that took forever to connect Apple.

  In addition, this update was tailored to address issues on older models of iDevice.

  My advice on the conduct of iOS upgrades/updates.

  Ideally, your iDevice should maintain a minimum amount of free storage for 4 to 6 GB or more on any iDevice (more free space, the better it is), plus, more 50%-60% state of the battery to ensure smooth operation, as well as, to ensure the possibility of an update/upgrade installation to update iOS successful.
  In addition, it is better to upgrade an iDevice connected to a computer running iTunes with you sync iDevice had and backed up by iTunes rather than OTA Over The Air () using a wireless WiFi connection, if possible.

  Doing a major or critical OS update/update may be risky to do in Wifi or cell due to the risk of interruption of data or forged data, causing problems with downloading the OS data and the subsequent installation of the unit.

  Also, it is best to do the update/update via iTunes you will get the update/upgrade entire and not only a smaller WiFi download version/serving based on your iDevice to model that can or can not download everything that your particular iDevice needs.

  If you have no other choice than to use the Wifi, then make sure that you have a solid and stable connection the will of the signal does not induce the possibility of dropout data.

  I prefer the iTunes method because there is minimal risk, and I've never had PROBLEMS with ANY operating system, updates using this method.

  Good luck!

• Can not activate Win 8 - reports of problems with the product key

  Hi all

  I have just downloaded 8 Win and tried to upgrade my existing Win 7 Home Premium VM, which I run on VMWare Fusion 5.0.1 on my Intel MacBook Pro 2009. I wasn't able to do the upgrade in place - the installer told me that it was not possible to run Win 8 on this machine. Instead, I created a. ISO file and used to install Win 8 in a new virtual machine. Everything works fine, but I can't activate Win 8. The error message tells me that "something is wrong with the product key" even if I could install Win 8 with the same fine product key.

  I called various hotlines MS today but don't have anything got no solid advice. Am I the only one who experience this issue? Is there something I need to pay attention during installation of the virtual machine to win 8? Is it possible to install a fresh VM with a key product upgrade in the first place? I would appreciate any information you might have on this subject.

  Thank you in advance and Bravo,

  Georg

  Hello

  Had the same problem after installing Win 8 Pro Upgrade on Fusion 5. Follow-up to "How to do a clean install on Windows 8 Pro Upgrade VMWare Fusion" here, problem solved (for now).

  http://www.moosooboo.com/tag/clean-install-on-Windows-8-Pro-upgrade-in-VMware-Fusion/

  Good luck

  JKB