Where do you buy the media center remote control?
Where do you buy the media center remote control?
What operating system is installed on your computer?
You can buy the remote control for Windows Media Center of Windows Store:
Reference:use a remote control with Windows Media Center
Hope the helps of information.
Just upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.
after update to XP media center units Vista remote controlJust upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista. I checked the usb driver for the usb XF-10 rf remote receiver and it is fine, uninstalled and reinstalled it. Handset was working fine a few days ago. I also went in 'Administrator', 'services' and then active HID, but it still does not work. Media works well, but it would be nice to have the operation of the remote control! Not particularly computer, simply suggestions please! Thank you, Nick.
I suggest you to check the battery. Additionally, make sure that you have installed the right drivers for you Consumer IR Port.
For more information, you can check the link below,
How to obtain user guide and the use of the ExpressCard Mobile HP Media Center remote control
My HP Pavilion dv7-1448dx-product # NV213UA #ABA, my product has a tuner inside card? I'm running Win 7 Ultimate x 64
I searched HP and found 1 photo of my card ExpressCard Mobile HP Media Center remote control, I found all the descriptions of component and everything BUT how to use it?
Where can I get information on how to use the "card ExpressCard Remote control Mobile HP Media Center"?Deborah M souls
Same question that:
Windows Media Center learned remote control cable, cannot recognize the Windows Media Center remote control
Running Vista Home Premium 64-bit. I rent a cable box so I can get some programs at the 3-digit level. When I've set up my Windows Media Center (WMC), WMC learn successfully the cable box remote 1 - channel upward. My problem is the next step and change the channel using the Windows Media Center remote control or keyboard. My keyboard or the WMC remote will change the channel.
I got Windows Media Center to re - learn the cable box remote control twice, which is always successful, but again once, when the time comes to use the Windows Media Center remote control or my keyboard to change the channel, the channel does not change.
Could someone please help me with this? Thank you in advance.
If you receive your TV signal through a set-top box and Media Center is unable to change the channel, or it changes channels incorrectly, check the following:
· The infrared diffuser is connected to your remote control receiver. If the infrared diffuser is not connected, Media Center cannot send a signal to the set-top box to change a channel.
· The infrared diffuser is well positioned at the front of the set - top box. If you are having trouble placing the IR blaster on the set - top box correctly, try to use a flashlight to locate the signal on the set - top box receiver.
· IR control codes are configured correctly. If constantly changing channels, control IR codes may not have been configured correctly during the installation of TV signal. To reconfigure your TV signal, on the Windows Media Center start screen, highlight toTasks, clickSettings, click on TV, then clickSet up the TV Signal.
- Center cannot send a signal to the set-top box to change a channel.
More information here: problems with watching TV on your computer
Also have a look if you find useful suggestions in this thread.
Microsoft Media Center remote with pace DC50X 1039, Setup box cannot change channel
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
Qosmio X 500-Media center remote control
Is it possible to use a Windows Media Center remote control immediately with a X 500?
I m X 500 not owner but if there is a remote control for X 500 available you can get it from your ASP:
http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider
Just give them a call and ask for that. ;)
How to disable the media center remote sensor?
I'm unable to access the cheat console into oblivion and I googled the question, many people have the same problem, and common answer seems to be to disable the remote sensor in Windows Media Center. I've been all over my pc, trying to figure out how do it, can anyone help?
Here's another user who had a similar problem associated with the link.
Please let us know status.
Qosmio G30 - Media center remote control does not work in windows
I have a Qosmio G30-194,
first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.
I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.
Please advise me what to do, should I send it to the service center, or there is an easier solution.
NB:,: my laptop info are:
PQG32E-01P018AR model number
Thanks in advance
> first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.
If you had a problem with the VGA chip then the whole motherboard has been replaced.
Maybe it has something to do with your problem.
Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.
Windows Media Center remote control
I have been using Remote WMC (A9O-00007) on a PC connected to my TV. I love this remote because it also controls the switch on the TV and the volume. Two days ago the functionality of the remote computer no longer works, but the buttons still light up as well as the light on the receiver. It still works to control the TV. There was no change in my computer, not updates, software etc. He worked in the morning and does not not in the afternoon. Between these periods, it fell between the cushions of the sofa and I guess only several buttons could have been pressed for an extended time period. I tried to replace the batteries and also tried the remote control on two other computers in the House. Nothing works. If anyone has had this problem and know how to fix?
Thank you for your response.
I ask you to contact the manufacturer of the device on the remote control to get help as it seems to be more related to the problem of equipment.
Hope this information helps. Please do not hesitate to contact us if you have a problem with Windows.
DELL FOR WINDOWS MEDIA CENTER REMOTE CONTROL.
I need to replace my Dell's IR remote. I also need to replace the receiver?
No, if the receiver is working.
Where can I download windows media center?
I accidentally deleted Windows Media Center on my computer. I want to install the program, but I can't find where to download it.
How did you uninstall the Media Center?
Are you sure that you has just simply deleted the shortcut that opens the Media Center?
Try the first next.
1. right-click desktop and select New /Shortcut.
In the enter the location of the item box, copy / paste the following text.
In the box enter a name for this shortcut , type Media Center.
This should result in a Media Center shortcut on the desktop. Double-click this shortcut to open Media Center.
If this does not work, continue.
2. Media Center is a feature that can be installed directly from your computer.
Open Control Panel / programs and features.
In the left menu, select Windows turn features on or off.
As soon as the list fills, extend the functionality of media and place a check in the element of Windows Media Center .
Click OK and it will be installed.
Let us know the results.
Static IP remote access for the media center
I NMH410 work through a WRT610N router. My ports are configured for static IP access. Seems to just going through www.ciscomediahub.com does not work well for me.
Can someone provide the 'exact' URL I would enter in order to access my media center?
Documentation of assistance through Cisco shows: https://Wan_IP_Address but that doesn't seem to work. The demand is just there and finally once outside.
Apparently, I discovered and corrected the problem that I had with 'Remote access' to my Media Hub.
Somehow, there are two configurations of router that had to be done. On two port forwarding configurations has been necessary and once allowed me to access the media center.
It seems that my ISP has a 192.168.x.x address router that was different from the address of my router 192.168.x.x. It is on the home router when I incoming and make changes to the information of port forwarding. The fact that I was getting an error message indicating that I wasn't even reached my router alerted me to the fact that my ISP was blocking remote access. In the end, that's where my problem was discovered.
If you have problems to access your media "at a distance" pole through its IP address (and not by the cisco media center), make sure that you configure the ports of the router specified by your Internet provider address, as well as the ports of the router that you have on your network home.
I have forwarded port 443 on the two addresses of router port, and I can now access my media hub remotely. Now if I can't play videos remotely, I'll be set. This leads to another problem that I'll send it in another thread.
Thanks for the help and suggestions of each.
How to use the NEW BLACK xbox 360 media center remote with Windows 7 Ultimate & Windows Media Center
I have the new Black xbox 360 media center remote and I can not understand how to use it with my PC to run windows media center. I'm running Windows 7 Ultimate x 64, and I also have the receiver wireless for my xbox 360 wireless controllers.Here is a link to a better image of the remote control.Here is a link to my xbox 360 wireless receiver.I also have a mini receiver RF for a keyboard and a mouse if that helps somehow.I don't have an xbox 360, but I like to use my controller wireless for my PC games and emulators like the style and color of this remote it would go well with my current setup as well as with XBMC.If anyone knows or can help me to find a way to make this work I would appreciate it a lot.Thank youMichael
Thanks for posting your question in the Microsoft Community.
The question you have posted is related to the Xbox 360 and it would be better suited to contact Xbox support to obtain assistance from the links below:
Contact XBox Support:
I hope that the information above helps you.
I have Windows XP Media Center 2005. The Media Center is missing. Help, please. Thank you...
Windows XP Media Center 2005 will not open or load the file Media Center. My computer does nothing but
freeze the other programs. The only way to close Media Center is to go to the Task Manager.
Hello Beckymyers,Thank you for your message. Let's try the following:Click "Start" > click "Run" > type cmd and press "Enter."At the command prompt, type the following entries and press "Enter" after each of themRegsvr32.exe atl.dllC:\WINDOWS\eHome\ehSched /unregServerC:\WINDOWS\eHome\ehSched/serviceC:\WINDOWS\eHome\ehRecvr /unregServerC:\WINDOWS\eHome\ehRecvr/serviceC:\WINDOWS\eHome\ehRec.exe /unregServerC:\WINDOWS\eHome\ehRec.exe/regserverC:\WINDOWS\eHome\ehmsas.exe /unregServerC:\WINDOWS\eHome\ehmsas.exe/regserverAfter you run these commands, restart your computer and test the Media Center. Please let us know the result.See you soon
Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
I have a HP Pavilion dv7 and my agreement now bad hard drive to the Geek squad. Do you know where I could buy the recovery disk?
I have a HP Pavilion dv7 and my agreement now bad hard drive to the Geek squad. My problem is that I'm not able to find my recovery disc and HP has no more of them. Do you know where I could buy the recovery disk?
The official win7 ISO images can be downloaded here;
You download the version installed on your HP, burn a dvd using ISO, software, the burning at the slowest speed, on quality discs, then install it using the Win Key on the label on your PC.
You will then need to install specific drivers of HP, not of the preinstalled HP software will be at your disposal
Button 'Back' on the Windows Media Center remote is not recognized by Windows 7
I am currently using the Windows 7 RC. I have been for awhile now. Recently, while trying to use the Hulu app, I noticed that the 'back button ' on my Windows Media Center Remote no longer worked to switch from the full video on the menu. I contacted the support of Hulu and they guided me to an online tool that shows the output of a button on the remote control. All other keys work fine, but the 'Back' button doesn't produce any output. This means that Windows itself is not recognize the key.
The button works in Windows Media Center, itself, but it does not work when I am in Windows. It worked fine for the last few months and I had not used for about a month (and reinstalled the RC) and now it no longer works.
The receiver displays in the form of "eHome Infrared Receiver" Device Manager and when I try to update the drivers it says I have the latest version. Something seems to be wrong with either the driver or there is a problem in Windows 7 itself which is the cause of not recognizing this key more.
Well, I tried using the key on the keyboard and which worked to switch between menus. I accidentally hit the ESC key on the keyboard, which worked to switch between the menu and the video as well. Out of curosity, I tried a few other buttons on the remote control then and the 'Clear' button, which is down by the pad on the remote works!
Thanks a lot for your help mark! :-)
Maybe you are looking for
Photosmart HP 7520 e-all in one printer - printer error
The printer gives a not useful message. It says "Printer Error" and I have to restart the printer. Blinking text and all the four icons on the sides. Does anyone know this problem also? I just bought this printer and installing the printer the printe
Satellite A200 PSAF6A - HARD drive is not recognized. No recovery of product
The drive HARD in my Toshiba Satellite A200 PSAF6A-0US01N is not recognized in the machine or any other computer, so I can't run any windows/toshiba repair. I know that readers have a factory reset hidden on the disc and press 0 to the power upward,
New Satellite C850D-11 q SYSTEM_SERVICE_EXCEPTION
Hi, can someone help with the problem annoying fricking I get a blue screen with the error,SYSTEM_SERVICE_EXCEPTIONUsually its when I'm on ebay or a similar site. PC world has changed the computer laptop and do it again. I can't take another laptop t
My laptop marked as being repaired, but two days later it has not yet delivered
I sent to my y500 relief last Friday. He arrived in the filing center following Tuesday (June 10) and according to the filing status page has been repaired the same day and are shipped shortly. It's been 2 days and I had no updates on this subject be
How to view the songs that were on the "rocket" using windows Explorer?
How to view the songs that were on the "rocket" when buying using windows Explorer?