Where is the "install windows" (ISO) file on my computer?

Similar Questions

• installed the new windows Friday and since my computer is very slow and not connecting to internet properly

  installed the new windows Friday and since my computer is very slow and not connecting to the internet correctly... anyone else having these issues?

  System Restore to go back before the show.

  I suggest you to install the updates one by one and reboot the computer after installing each update to verify that update is causing the problem.

  Also note the updates that you install on the computer.

  Once you come to know what update is causing the problem, let us know.

  Do not install any driver updates offered by Windows Update. Find them in the manufacturer's website instead.

  Try a convenience store

  Windows includes two programs of troubleshooting that you can use to automatically fix some common problems with performance on your computer or to the maintenance of your system.

  Open the Performance troubleshooting utility by clicking the Start button, then Control Panel.

  In the search box, type Troubleshooting, and then click Troubleshooting.

  Under system and security, click check for performance issues.

  Open the of System Maintenance Troubleshooter by clicking the Start button, then Control Panel.

  In the search box, type Troubleshooting, and then click Troubleshooting.

  Under system and security, click run maintenance tasks.

  08/14 / 1115:46: 45 pm UTC

• Old computer is dead, HARD drive still alive. Can I install windows 7 on your new computer without formatting the old HARD drive?

  My old desktop computer recently died of a motherboard failure.  As I understand it, I should be able to install windows 7 from my old computer to the new, but only if I delete the old installation.

  Does this mean that I have to format the old HARD drive?  Because the old computer HARD drive seems to be alive, I would retrieve the data on a new machine first, before I have to format and I need to install windows on the new computer to get the data from the old HARD drive.

  No, it is taken on trust that the old installation is no longer active, there is no mechanism to remove the old license in order to make a valid new. Remove the Windows directory (or rename) makes the old system inoperative.

  You find that the automatic authentication fails on new construction and need to call the licensing Center to check that you have only one installation. Apart from the OEM rules if a license has been activated too often, and recently, it fails in a 1 time.

• I have a PC with windows 7 Home Premium installed. The PC is faulty and cannot be resolved. Can I reinstall the same Windows 7 to a new computer without additional cost?

  I have a PC with windows 7 Home Premium installed. The PC is faulty and cannot be resolved. Can I reinstall the same Windows 7 to a new computer without additional cost? If yes how can I do this? Some people reported issues license keys and it cannot be registered once in a PC.

  Thank you

  It is the major limitation of the OEM software that it can be installed on a PC. The COA label will confirm whether the license is OEM. A number of elements can be replaced in a PC in the way of repair, but only if exactly the same model of Council can this be exchanged.

  Even if you transfer the drive to the new PC would not authenticate because of the change of equipment, and it would be unlikely to to re-authenticate online.

  If the label is not OEM and you have a retail package, so it can be transferred.

• Where is the Dreamweaver CS4 preference file located in Windwos 7?

  Where is the Dreamweaver CS4 preference file located in Windwos 7.  I'm having some weird copy /paste problems and feel that if I trash, he can solve the problems.

  Thank you

  Bob Coulter

  There isn't a single preferences file. This is the configuration file referred to in that link I gave you earlier.

• I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7

  I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7.

  Hello

  And much more: (XP mode requires professional, Ultimate or Enterprise).
  

  Get all the benefits of Windows 7 and continue to take advantage of your investments and more
  business and productivity programs that require a PC running Windows XP.

  Note: Windows XP Mode requires a download.
  http://www.Microsoft.com/Windows/Windows-7/features/Windows-XP-mode.aspx

  Windows XP mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode is supported through Technet

  TechNet - Forums - Windows 7 virtualization
  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Can I install Windows Journal on a Mac computer?

  Can I install Windows Journal on a Mac computer?  I currently use Windows Journal to teach by posting paper documents on a smart board.  The administration requires me to switch to a Mac, but I don't want to lose the Journal and its capabilities.  I will not need to use a pen on the computer, I use the stylus on the smart board.  I would buy the windows software of newspaper and try to download on a Mac.  Can I order windows software log?

  You have two problems here:

  1. Programs Windows cannot be installed on a Mac.
  2. Windows Journal is not available as a separate program.

  If the Administration allows it, you can install Windows on a Mac with Mac OS X. Then, there are two ways to access the applications Windows explained here:

  http://store.Apple.com/UK/browse/guide/Windows

  You can buy a copy of Windows to do this.

• Since I installed Windows 7 Pro on my computer, my Canon MP640 sends an error of 5 00.

  Since I installed Windows 7 Pro on my computer, my Canon MP640 sends an error of 5 00. Can someone please help? Thank you.

  Please see this Canon support page on your error (the link up in the search results):

  http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp640?CMD=MIXED_SEARCH&mName=PIXMA+MP640&mType=PIXMA+MP&pageKeyCode=ekbresults&searchString=5C00+&BASIC_SEARCH_CURRENT_TOPIC_ID=1050&BASIC_SEARCH_CURRENT_TOPIC_TYPE=0&RESULTS=RELEVANCE&RELEVANCE_START=1&RELEVANCE_COUNT=10&CONFIGURATION=1011&PARTITION_ID=1&TIMEZONE_OFFSET=null&USERTYPE=1&isSecure=false .

  In addition, when you upgraded to Windows 7 have you installed the latest drivers for Windows 7 available here:

  http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp640#DriversAndSoftware .

• Remove the 2 GB windows ISO file after I burned the dvd of windows 8 pro?

  Downloaded Windows Pro 8, all right.

  Downloaded to make the ISO file, since I just clicked on install the first time.  Recorded the 'Windows' disk image file in my documents.

  Created the DVD using the Update Wizard very easily.

  It is, now that I am running windows 8 pro and my DVD is done, I try to delete the image disk 2GB 'Windows' file in my documents and get the error message 'The action cannot be completed because the file is opened in the system', so I can remove it and if so, how?

  Downloaded Windows Pro 8, all right.

  Downloaded to make the ISO file, since I just clicked on install the first time. Recorded the 'Windows' disk image file in my documents.

  Created the DVD using the Update Wizard very easily.

  It is, now that I am running windows 8 pro and my DVD is done, I try to delete the image disk 2GB 'Windows' file in my documents and get the error message 'The action cannot be completed because the file is opened in the system', so I can remove it and if so, how?

  Yes, you can remove it. Close all programs, restart the computer and try to delete it again.

  If the problem persists, try to start safe mode and delete it.

  How to start Windows 7 in Safe Mode : Notebooks.com

• Try also install Windows XP on a portable computer and the process it says miss me 4 .xml files.

  I am installing Windows XP on a laptop.  The system stops at various points and wrote that a file is missing.  The files are listed below.  Could not complete the loading process.  I check my PC Tower and the files are on it, and I've copied to a USB flash key.  Can I use these files on the laptop?  I would like to use the CD that comes with the Tower, but it is cracked and I ordered a replacement of Microsoft.     HELP

  ipcfg. XML

  cmnicfgh. XML

  OSINFO. XML

  potscfg. XML

  Hi kenny38,

  Sorry for the delay. Try the tip in the link below to perform a "Clean Installation" of windows XP

  How to install or upgrade to windows xp.

  http://support.Microsoft.com/kb/978307

  For tips on troubleshooting Setup errors, see the link below.

  How to troubleshoot an XP Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if that helps.

• Where can I install Windows Live - the email client, not the e-mail service?

  I had a problem or two with my emails, as shown in this forum. A good piece of advice, it's that I should install Windows Live, the mail client (not Windows Live Mail, the mail service.

  I looked up and down on Ms sites - none other than the basics, including Livemail.

  I found it on File Hippo and Cnet, but both want to install additional software to speed up the download. I had problem with one of these programs a year back and I'm happy to wait as long as it takes to download it.

  -Can anyone tell me the MS page so that I can download the Windows Live Mail client please?

  It is part of the essential elements of Windows, but you don't have to download anything.
   
  Windows Essentials
  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials
   
  
  FYI: Windows Live Mail help is in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all

• Wizard Boot Camp 6.0.1 does not install Windows ISO 10? Application for USB?

  Hey guys, so I bought this Mac Mini back in September and installed Windows 10 through an iso image on the subject. The problem occurred when everything started trolling. As I speak everything crashing... Same Finder. Then I reinstalled everything lost a part of my data because it does not transfer to the Back Up Hard Drive is correctly. Anyway, now I'm on El Capitan, and I can not install Windows 10 ISO images. He is constantly asking me to have a USB key where previously it was not.

  Everyone knows these issues? I don't really have a USB key, a gigantic 5 TB hard.

  1. in which year is the Mini?

  2 yosemite and El Capitan differ by the BCA UI.

  3 was W10 on-site as an upgrade of an existing W7 / W8 + installation using the ISO? Are now trying a clean install?

  4. your Mac can use either an external optical drive or a USB key (or both) to install the W10.

• where is the wallpaper of graphic files located?

  The place of 'repair' who 'fixed' my computer added a bunch of pictures that I want to DELETE my "Properties" and I also want to add files customized for the wallpaper.  Where are the files located on the C drive?  They have not yet found and to tell you the truth, just can't remember where they are.  : )

  I don't think that this place of the computer's real competent...  I don't want to take my office back in there for this problem, I think I can fix my own.  I built this 'thing'!

  Thanks for any help/comments/hints/instructions that you have!

  Katie

  Hello 1Startdancer,

  My apologies. I assumed (wrongly) that the photos had been stored in the folder of wallpaper. It seems that the repairman took pictures "as wallpaper."  To do this the photos must be stored in the folder "photo". If you already have other copies of these photos elsewhere the best solution is to delete all those photos in the folder "photo". Once you've done that, go into display properties (right click on the desktop and select Properties, and then in the Properties window, select desktop). Once you see the list of wallpapers, select one that naturally belongs to Windows (do not select one of the photos you want to get rid of that) and then click on apply. Once you have selected a windows desktop and the desktop has refreshed, close display properties and then open the properties of display again. Photos that you removed should be now is no longer there.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• blocked when the install window 7

  Dell vostro 3450, window 7 professional 64, try to install window7 from the cd given with a computer laptop while in purchase. but hangs at the expansion of the files of the window 0% and sometimes crashes at different location. Please help me.

  Installation may stop if the system cannot copy files. Here are some possible causes and solutions for this problem:

  Your Windows installation disc is scratched, smudged, or dirty. Clean the disc with a soft cloth, insert it in the CD or DVD drive, and then start the Windows installation again. If your installation disc is damaged, you may need to replace it. For more information, go to how to replace lost, broken, or missing Microsoft software or hardware on the Microsoft Web site.

  Your CD-ROM or DVD drive is not working properly or the disk might be vibrating too much for the laser correctly read data. For more information about this problem, see your hardware documentation or contact the manufacturer of the CD or DVD drive.

  If your computer has multiple CD or DVD drives, your computer may attempt to locate files on the wrong drive. If your computer has a feature to disable CD or DVD drives that are not used, turn off readers that you don't use. Otherwise, try to insert the disc in a different drive, and then restart the installation.

  This is usually caused by hardware or software that is not compatible with Windows 7. If you have this problem, follow these steps:

  Wait about 10 minutes to see if the installation continues. Look at the led on the hard drive (often a small light on your computer that blinks when your hard drive is running) to see if there is no activity. If your hard drive seems to be working, the installation must be current. If your hard disk doesn't seem to work, go to step 2.

  Uninstall all antivirus software, and then restart your computer. Don't forget to enable antivirus software after you install Windows.

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  If the computer still stops responding during Setup, contact your manufacturer computer or your retailer.

• Where are the 3rd party application files stored?

  When I install an application "Hello World" simple on my BB device, is the *.cod extracted in the hierarchy of the original file of the classes?

  If so, where are the class files physically stored? How can I find out the absolute path of this application? I can browse its files?

  Also, is stored on the flash memory, NV store, or on the SD card?

  You will not be able to find the class files associated with your cod.

  I think you are trying to create a class file, you can run dynamically.  You'll never be able to do it, at least not with the current JVM.

  Please ask only once.