Where is the internal microphone located in an Acer V5?

Similar Questions

• Inspiron 1525 not able to select the internal microphone for the webcam, or it appears on the Control Panel, sound, Audio devices

  Initial problem was Dell Webcam video recording record any sound.

  In the Panel configuration, Device Manager, sound video and game controllers, there are two high definition Audio devices listed: location 1 (internal Bus High Definition Audio) - I take it that it is the internal mic. and location 2 (Audio High Definition Bus Interior) - I take it that it is the external microphone jack. Both have the same version of the driver.

  Control Panel, sound, the recordings tab showed 2 devices that looked like identical except the bars that show green with volume were only on the first, which is also the default and would detect sound if you're real close to the webcam microphone when you talk. The two devices displayed as 'work '.

  Accessories, Sound Recorder records are silent any distance you get to internal webcam mic.

  Dell WebCam Audio Source tab has two selections, the two reading Microphone (3 - high definition Audio Device). Both selections recorded the sound with the EXTERNAL microphone jack. There is no way to select the internal microphone webcam, it is not an option.

  According to the instructions found on the web, I uninstalled the first device only in the Device Manager and rebooted. The same version of the same driver has been installed. But now the parameters have changed. Device Mgr shows Loc 1 and 2 pass. However, under the Øresund, tab records there are always 2 features, but the first said "currently unavailable", is always the default and the sound bars that go for green for the audio tests are ANOTHER unit now instead of the first. If you check the properties of each device, they BOTH show the same location 2 (inside Bus High Definition Audio), i.e. the external microphone jack.  Loc 1 device (built in mic) does not appear!

  Accessories Sound Recorder works with the EXTERNAL microphone. (How does he know that one to use, it is not giving me a choice?)

  If the tracking device 1 (internal microphone) does not appear anywhere besides than Device Manager. I want to use the internal microphone for Skype and webcam. Somehow, I need to get the Loc 1 unit appears on the sound - recording tab and in the Source Audio Webcam list? What should I do?

  Thanks in advance for your help.

  Jimco

  Go to the Inspiron 1525 support page

  http://www.Dell.com/support/home/us/en/04/product-support/product/Inspiron-1525/drivers

• Is it possible to reinstall or reset the internal microphone of an iMac?

  Some background information:

  27 "iMac 5K (end of 2015) running OS X El Capitan (when the problem started), to give birth to Sierra of MacOS. Also have a Bootcamp with Windows installed 10 partition.

  A month ago, when under OS X, I noticed the internal mic produced some static when you try to use it. Audio messages in voicemails would be static instead of my voice. The weird part? If I switched to Windows 10, the internal microphone works without any problem. I can ask questions of Cortana, I can record voice messages and they read without static electricity. In fact, no matter what I use the microphone internal to in Windows, it works perfectly.

  Sierra of MacOS is out, so I hope that this update may be a BONE would settle the matter. Nope. Internal microphone still does not work on MacOS, but still works perfectly in Windows 10. It is because of this that I am positive the internal MIC is not broken or have a loose wire.

  I went through a few steps to try and fix the internal microphone, such as resetting the SMC... but nothing has worked. Any help or ideas on how to solve this problem would be greatly greeted.

  Hello dear user

  Thank you to use Apple support communities

  My recommendation would be to take it to an official Apple store, workers are espceialists, they might be able to fix, make sure also that you have never removed the water on top of the mic. In my iPad, a drop of water directed the music video of speaker if she never exceeds 30% volume of the music.

  But if you don't have a store nearby, uninstall malware and unnecessary software, make sure that you don't have a program that allows you to change your sound (like Skype) systems, if you don't do that this program has no impact on your microphone. (I used to have Skype but it also makes audio cut so terrible, piano music sounded like heavy metal music, so heavy metal music was like to...) I don't know what to say.)

• Satellite A200 - 14 d - the internal microphone volume is too low

  Hello, I installed the latest version of bios and drivers, but the problem with the internal mic has not changed: the volume is too low (levels the MAX value)-> unusable.

  And when the AC is plugged in, a heavy background noise appears in the hip or trendy helmet speakers.
  In addition, in the mic plugged in too... :(

  Hello

  I found similar topic where the user called Andrej wrote:

  Try this please:
  1. the right of the mouse, click on its icon in the task bar choose sound option
  2. change in the recording tab
  3. mark the front mic and click Properties
  4. change in the last tab named advanced
  5. in exclusive mode, uncheck the box first one

  Please test now and give me some feedback.

• disable the internal microphone

  Lenovo x 201 2985 F4U

  is it possible to disable the internal (built-in, integrated, whatever it's called) microphone on this unit? I have not been able to find a way without disabling the whole card.

  You can probably disable it in the bios, under Security, access port i/o. or in windows via Control Panel, sound, recording, select microphone and disable.

• I don't see the internal microphone on the control panel

  I clicked on do not use the microphone inside. It was supposed to be a temporary measure. Now the internal mic has disappeared from the Audio tab on the control panel so I can restore.

  I would like to come back to the internal mic. I have a Sony VGC-JS1e

  Thanks for any help

  Hello
   
  Try these steps and it should allow the listener to the back:
   
  1. open the control panel. (Classic view)
   
  NOTE: Open the start menu and click on the menu button of the control panel.
   
  2. click on the audio icon.
   
  3. click on the recording tab.
   
  NOTE: This also works in the reading tab, but there are usually no hidden audio devices there.
   
  4. right click on an empty area and click Show disabled devices.
   
  5. you will now see the audio devices disabled with the arrow pointing down on them.
   
  NOTE: These audio devices may vary according to the audio card installed or chip you have.
   
  6. right-click on each listed off audio device that you want to activate and click Activate.
   
  7. you will now see this when the audio devices are enabled.
   
  NOTE: You can now change the property settings on these audio devices in the way you want.
   
  8. click OK to close the sound window.
   

• How can I activate the internal Microphone?

  I have a Dell Intel Core with windows 7. I turned off the internal mic once and now I don't remember how to turn it back on. I want Skype to my 6 year old granddaughter, but can't because it won't save my voice. THEN; How do you turn on microphone internal?  Thank you in advance for helping out with this.

  Phyllis

  You should consult the documentation for your computer's system or contact Dell.  It is not a Windows problem.

• The internal microphone too low volume

  I have a new dell inspiron 5050 w intel core 3 and windows 7 and internal microphone level is not high enough.  The level is set to 100 and up to 20 dB boost. Skype calls cannot be heard and sound tests have a very low volume.  I heard that maybe that's a problem with windows 7. Some of those who have upgraded to vista say they have the problem.  Driver update is grayed out. Thought of the back of computer.  Another solution?

  Hello

  1. what the audio output of the computer?

  2 have you made any changes to the computer before the show?

   

  Method 1: Run the following fix - it:

   

  Automatically diagnose and fix problems of Windows audio recording:

  http://support.Microsoft.com/mats/AudioRecording/

  Method 2: Uninstall and reinstall the sound drivers.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand sound, video and game controllers, right click on the audio adapter option, click on uninstall

  (e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.

• Where is the bios chip located in the satellite A210 - 1 4?

  Have the bios replacement chip for this model, but you don't know where the bios chip is located on the motherboard?
  Any help is appreciated.

  Made mistake in the model number. It's Toshiba Equium, A210 - 1 4 (psafj)

• How can I activate the internal microphone in vista

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Click with the right button on the speaker near clock - recorders - right-click in the box - check
  Show disconnected devices and display devices disabled - check your micro-
  Turn highlight them and then on lower right properties. To ensure that the injector is appropriate
  is enabled and check the other settings - tab levels make you MUTE is disabled
  and APPLY / OK to change.

  Check with type Sound Recorder - Start - in the-> Sound Recorder search box found at the top of
  list - click on - RUN AS ADMIN

  ---------------------------------------------

  If necessary:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
  Audio definition (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version.
  Now click on update drivers who cannot do anything as long as MS is far behind the certification of drivers.
  Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest drivers Audio/Sound - download - SAVE-
  go to where you put them - just right-click on Reboot - RUN AS ADMIN-

  Check the Version on the tab of the driver in the device as often audio drivers Manager
  restoration and then finally install the latest version. Restart and check post
  each test, not uncommon to have to run the pilot of 1 to 4 times or more. Just do
  of course, the version you have installed appears in the tab of the driver.
  
  Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
  operating mode.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right-click in the box - check
  Show disconnected devices and display devices disabled - check your micro-
  Turn highlight them and then on lower right properties. To ensure that the injector is appropriate
  is enabled and check the other settings - tab levels make you MUTE is disabled
  and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver).
  Mine's Manager Audio RealTek, your DD can be entirely different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Pavilion P6000: where is the TPM chip, located on the card mother VIOLET-GL8E M2N78 - LA 513430-002

  I am trying to locate the TPM chip on my PURPLE-GL8E M2N78 - 513430-002 motherboard to remove it and install on my new motherboard because of my HARD drive lock without the chip. Running Windows 7 Home Premium.

  Frederick_B

  Thanks for the info. Unfortunately I can't back up the HARD drive to fix. The old tower is more regognizes the HARD drive either. What I read this other safety device to prevent theft. I have to chalk this up to my lack of knowledge on the MPT and BitEncrypt software. I'll just have to buy another copy of Windows, and to reformat my HARD drive or buy a new HARD drive so I can't reformat. I wish I had found this forum until I "shot myself in the foot' on this one. Thank you for trying to help.

  Eric

• Where is the delete button located vi?

  I use 3.5 TestStand and LabVIEW 8.0.  I need to be able to delete files in a program of TestStand, and it seems that the best way to do that is call a LabVIEW vi. The Remove feature of LabVIEW to i/o files-> Advanced File Functions-> delete is what I need, but I can't find the file on my hard drive - I need to have the path/file name to be able to call directly from TestStand.  Anyone know where to find this file, and if there is an easy way to get the path to a function in a block diagram?

  Thank you!

  -Bill

  Yes, but it's pretty easy to do.

• where are the 'cookies' clean located ANDS defragment the disk and cleaning

  I need to clean my cookies and defragging my computer can u please tell me where to loknat this condo I was telling you about

  Hi Deborah Spangler

  
  You can refer to the links below and check if the information provided will help you-

  http://Windows.Microsoft.com/en-us/Windows-Vista/improve-performance-by-defragmenting-your-hard-disk

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/strategies-for-freeing-disk-space

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-your-Internet-cookies

  http://Windows.Microsoft.com/en-us/Windows-Vista/cookies-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-temporary-Internet-files

   

  I hope this helps.

• Where is the '111_All_WD_Files' file located so I can rub on my machine which will allow to th

  Installation of Adobe Reader keeps gives an error 1325 with above the name of the file every time that I try to install the version XI.  I used the earlier messed up scrub tool install XI.  I need help badly with this problem, so I have a strong drive for my PDF files.

  Kind regards.

  Saturnman

  

  Is there something in your registry that points to somehwhere, it shouldn't.  See if anything in this topic helps http://forums.adobe.com/message/4704152

• HP G60-535DX Windows 7 Home Premium internal Microphone Inaudible

  I have problems with the internal microphone located at the top of the screen on the laptop of HP G60 PC, pre-loaded with Windows 7 Home Premium operating system.  All OS, PC drivers and system ROM was updated to the current.

  The sound it produces is at best barely audible or usually completely inaudible.  This is true when using the internal Sound Recorder app as well as when I try to use Windows Live and Skype for audio or video calls.  The fact that it has in this way by using Sound Recorder proves that this has nothing to do with firewalls or latency of the internet.  Also, I can hear and see people that I am trying to contact very well.

  I first noticed the problem on a system HP G60t that I bought at hpshopping.com in early December 2009, which was a version customized and delivered to me.   I opened a case with assistance and they told me I have to ship it for repairs or I could just return it.  I returned it.

  Thinking that I was just unlucky enough get a bad system, then went to Best Buy in late December 2009 and bought a second HP G60, this time above a G60-535DX, which has been configured in the same way.  Guess what?  Exactly the same problem.

  I did research on these HP support forums and the comments posted at bestbuy.com for the HP G60.  It seems that a lot of people have the same exact problems.  I tried all of the suggestions I've found, including the following, but nothing changes because of the quality of the microphone on two separate HP G60 books purchased from the point of sale / inventory is extremely poor and essentially non-functional.

  1. ROM and HP drivers update
  2. Updated software Windows
  3. Uninstalled Conexant Pebble high definition SmartAudio driver in the device, and then reinstalled Manager
  4. Battery disconnected and removed, you press power for 60 seconds, winding
  5. Adjust the parameters property of the driver Conexant Pebble high definition SmartAudio, including change the Format by default, exclusive Mode and the Signal accessories settings

  Someone at - it any other ideas?

  What HP?  If you go to the home page of official support for the HP G60-535DX, the second ranked FAQ is titled "Don't fix no audio or audio in Windows 7", whey discuss the microphone settings.  HP monitor the number of systems having the same problem, recognize a default configuration and put a notice or a reminder?  I know I could return just this system.  But I prefer that it works.

  Does anyone have this working properly?  Is it just luck of the draw?  Thanks for any ideas or suggestions, including how empower us HP for resolution.

  New update as of April 13 *.

  You may have experienced better quality microphone if you have installed the latest audio driver Conexant SP47803 published March 10^th. But if the drivers Conexant High - Definition SmartAudio Driver (version 4.98.60.50 (A) has not resolved your concerns we would like you to contact HP by calling a service HP (1-800-hp-invent) they have another option to help you.

  --------------------

  You have requested to be informed when and if a new driver is available, please see the information below and let us know what your experience is with the new driver, with the built-in microphone and the USB microphone, you opinion counts, thank you.

  Some improved microphone quality can occur if you install the latest audio driver Conexant SP47803, released on March 10.

  You can download and install the latest audio driver using one of the following options.

  • The Conexant High - Definition SmartAudio Driver (version 4.98.60.50 A) is available with the instructions for installation and download at the following link:

  Download page for Conexant High - Definition SmartAudio driver

  • The Conexant High - Definition SmartAudio Driver (version 4.98.60.50 A) is available as an executable (.exe) from ftp.hp.com at the following link:

  Executable link to FTP for the Conexant High - Definition SmartAudio driver