Where is the "PCMCIA Bus driver" and how to uninstall it?

The menu Tools and Information on the performance said that "these drivers are causing Windows to resume slowly"-

Name: PCMCIA Bus driver

File name: pcmcia.sys

Feature: Texas Instruments controller CardBus PCI - 8 x 12/7 x 12/6 x 12

Other posts on this forum, I understand that it is safe to uninstall this driver if it is not in use.  Unfortunately, I can't find.  I looked in Device Manager (there are two other devices Texas Instruments listed - or one has the correct device name).  I also looked in programs and features and menu of start-up of sysconfig with no luck.

My computer was crashing regularly about 10 minutes after waking up from hibernation.  My hope is that this driver uninstall will fix the problem.  Any help would be greatly appreciated.

It seems that the "Texas Instruments PCIxx12 Integrated FlashMedia Controller" device is the device you are looking for (the first two digits in 8 x 12, 7 x 12 and 6 x 12' is reduced to a "xx12' in the name of the device for simplicity). Try to disable it and see if your problem is solved.

Note: This device looks like it controls a card reader. It is a decive integrated on your CPU, where the floppy drive which reads flash memory cards (for example: SD card, Memory Stick, xD card, etc.).

Rifdhan

If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.

Tags: Windows

Similar Questions

  • Where are the Solution Center shortcuts, and how to use the (Scans)

    A frustration more than Windows 8 to get more than

    I have attached my C3180 to my new Windows 8 machine and the software installed.  It is running, but I'm a bit lost in the use of the center of Solution that seems different from what I had on XP.

    1. the only way I could see to change the destination of a scan, has been to create a new shortcut with the destination I want to use.  Is this correct?

     

    2. now that I have a short cut, where is it? When I run a scan from the Solution Center, the analysis proceeds to the default destination, so it must use the default shortcut.

    Is it possible to use the start scanning on the home of the solution Center window and make the scan go to my choice of the destination folder?

    Quit smoking research

    I found how to use the solution Center in Windows 8 here.

  • where are the files of keyword and how I get them into lightroom 4?

    I've upgraded from lightroom lightroom 3 4.  In many cases, the key words are missing - sort of. When I click on one photo, the keywords appear.  If I select a bunch of pictures, keywords appear as a group.  Why they not listed for each photo?  How can I get the "connected" without redoing each photo?  Let me know if you need more information.  It seems I read somewhere that keywords are stored in a separate file (many of these photos are jpg, if I do not speak .xmp), but I can't find where I read that.  Anyone know?

    Thanks for help.

    Margaret

    Hello.  Looks like I got all my keywords attached to the pictures.  What I did:

    Firstly I find all photos without keywords using a metadata search.

    I found that he appeared to be groups of pictures that had no key words.  I decided to at least get the main keyword on all people in a particular group, such as Canyonlands.

    Once I added one of the keywords, the others all appeared as if by magic!  Then, I went to each group of photos and added the main keyword and the others came and attached to the pictures.

    Don't understand why this happened or why it fixed, because it was so random.  But I'm happy to have my restored keywords (I had divided flowers by color, etc. so it was a lot of work!)

    Thanks for the discussion and self-help.

  • I have Lightroom 5.7.  My program keeps telling me that I have an update, but when I click on the download button he directs me just to the new Lightroom CC page.  Where is the so-called update and how do I download it please?

    @@

    the latest version of lr 5 (free) is 5.7.1: http://www.adobe.com/downloads/updates/

    LR cc 2015 is a free update for subscribers of cc, but must be purchased by perpetual license holders who want the 5 to lr lr cc 2015 upgrade, products

  • Where is the PCMCIA port on satellite notebook and can use a card 3g be used?

    Hello

    Can anyone advise on where is the PCMCIA port on satellite notebook?

    I do not have Internet at home and thinking about purchasing 3g card advice?

    Justin

    Hello Justin

    I do not for sure how much but I know Finalis series have a looooooooooooot of different models of mobile phones. Maybe you should tell us what satellite you have.

  • How can I reinstall the virtual bus driver (cmz vmkd)

    How can I reinstall the virtual bus driver (cmz vmkd)

    Hi rschreader,

    Follow these steps:

    1) click Start, type Manager of devices in the search box and press ENTER.

    (2) expand the 'system devices '.

    (3) right click "[cmz vmkd] Virtual Bus", choose activate.

    (4) you can refresh the Device Manager by clicking on "Scan for hardware changes".

  • I use to manage my DSL modem via an ip address. When I enter FF8 I wonder where to save the file. Why and how can I prevent the FF8 to do this?

    I use to manage my DSL modem via an ip address. When I enter FF8 I wonder where to save the file. Why and how can I prevent the FF8 to do this?

    And now, whenever I'm in an ip address that I wonder if I want to download the file.

    This happens when the modem server does not send the file in text/html, but with a different MIME type.

    I tried adding index.html in the event that the server can send this file as text/html.

    If your DSL modem has a support Web site, then you can try asking it there advice on how to configure the server modem.

  • Satellite Pro L50 - a: how to replace the memory, HARD drive and battery

    I just uploaded 2 new video from Youtube on the L50 - A. Satellite Pro

    The first is a tear down showing how to replace the memory, hard drive and battery (you can also clean the fan if it detects overheating).

    http://www.YouTube.com/watch?v=IG0lW7t92bI

    BTW why they made it so difficult to get just to the battery in this model?

    WARNING - proceed at your own risk and don't forget static precautions!

    Hope they help and if you have any questions let me know.

    + The message was edited: link has been removed ad channel may not +.

    Thanks for these videos. It may be useful to replace the memory, but I think that the owners of the laptop should not open the case. This may void the warranty.
    Be careful about this.

  • Followed my previous inquiry, my hard drive crashed and lost my copy of Acropbat 9 in installing the new hard drive.  How can I go to re - install Acrobat 9 from the disc, I hold. Thank you, Don Hamilton

    Followed by my previous inquiry, my hard drive crashed and lost my copy of Acrobat 9 in the installation of the new hard drive.  How can I go to re - install Acrobat 9 from the disc, I hold. Thank you, Don Hamilton

    Just reinstall from the disc (or download it from https://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html) and activate it with your serial number.

    If your number of activations exceeds max (2), then you will need to contact customer service.

  • Formatting the main HARD drive and do a fresh install of the OS

    Hi guys,.

    I have a Mid 2012 MacBook Pro running Yosemite (10.10.2). I did not care on the data management since the day that I bought and now it's all over the place and a lot of unwanted files. I have backups time machine the main hard drive and I also backed up all important data on a separate hard drive.

    My question is, is it possible that I can erase my entire hard drive and reinstall Yosemite (10.10.2)? The last time I tried to do this, my MacBook connected to the server and installed the latest OS (I guess it was time Cougar 10.8.4).) I don't want to update the OS because my Audio Interface has no drivers for what after 10.10.2.

    I don't like on the data loss that I have multiple backups of all the files of important work, as well as backups time machine of the disk set. Thus, formatting everything is completely fine with me.

    Thank you!

    neilkvyas wrote:

    My question is, is it possible that I can erase my entire hard drive and reinstall Yosemite (10.10.2)? The last time I tried to do this, my MacBook connected to the server and installed the latest OS (I guess it was time Cougar 10.8.4).) I don't want to update the OS because my Audio Interface has no drivers for what after 10.10.2.

    The only ways I know to reinstall 10.10.2 are:

    • You have the initial download of 10.10 after Yosemite went out and created a USB this version thumb drive Installer. If so, you can start Setup from USB, delete your Macintosh HD, install 10.10 and after 10.10 is installed, you can download and run the 10.10.2 Combo Update to bring it up to 10.10.2.
    • You have the 10.10.2 download after this version has been published and have created a USB this version thumb drive Installer. If so, you can start Setup from USB, wipe your hard drive Macintosh and install 10.10.2.

    If you can't do or any of the foregoing, all what you can do then is start Recovery HD and install the latest version of Yosemite, which is 10.10.5. Even if the HD recovery may appear 10.10.2,"limited you will always get the most recent version of Yosemite. Without either of the above, there is no way that I know how to install an earlier version of Yosemite. Maybe you could ask a local Apple Store to see if they have a solution for 10.10.2.

  • missing programs? Q931906, Q914455, Q920813, Q921598, Q924085, Q934181, Q936048, Q940602, Q943973, Q973924, where can I get these downloaded and how?

    PC worked very slow, ran a diagnostic and found this lack of programs Q931906, Q914455, Q920813, Q921598, Q924085, Q934181, Q936048, Q940602, Q943973, Q973924, where can I get these downloaded and how?

    PC worked very slow, ran a diagnostic and found this lack of programs Q931906, Q914455, Q920813, Q921598, Q924085, Q934181, Q936048, Q940602, Q943973, Q973924, where can I get these downloaded and how?

    Some articles that you list have several years; others are somewhat obscure corrections.

    What version of Windows have installed you, including service pack?

    What version of Microsoft Office have installed you, including service pack?

    The best thing for you to do is go to Microsoft Update and let your system for necessary updates.

    If you want to live dangerously and to download only specific items that you listed, go to

    http://support.Microsoft.com/kb/xxxxxx

    replacing the x by the 6 digit number (omitting the Q).

  • Where is the copy or cut and paste the toolbar?

    Where is the copy or cut and paste the toolbar?  How can I register my toolbar with the bold, italic, buttons etc.?

    Hello

    1 are. what application you referring?

    If you use word, then check out these links and check if it helps:

    http://Office.Microsoft.com/en-us/Word-help/create-a-custom-toolbar-HP003085155.aspx

    http://Office.Microsoft.com/en-us/Word-help/customize-your-toolbars-and-menus-RZ001003635.aspx

    It will be useful.

  • where are the printer presets stored? How to find the .prst files to load into InDesign?

    I use InDesign CC 2015 to a new intall of creative cloud on a new hard drive after the old one crashed. I always have access to my files on the old HARD drive and you have copied most of my files on the new drive. When I go to print in InDesign, the program seems to know what settings of the printer, I used on files that I created, but I don't see no presets. When I go to load the application InDesign presets where I should look to load the files .prst and that's what I want to know. They are on the local drive? If yes where? They are on the cloud in my Adobe account where I have my cloud files? I will keep searching my computer, but if someone knows the answer, please help.

    Printer presets are stored in the InDesign Defaults, a part of the whole of the preferences file. You should open the ID on the old system and then click on the dialog box define where you can select them and click on save, and then on the new system, you can load the game that you just saved.

  • where can I download Color Finesse and how I can install their Premier Pro or after affect?

    I recently bought master collection 5 DVD version. CD/DVD box I have three serial numbers: Master collection, organization/AE CS4 32 Bit and Color Finesse. I used the Master collection serial to activate my product. I have a 64 bit os, so I did not use body/AE CS4 32 Bit serial.  My question is about Color Finesse Serial. I searched this topic and considered as a plug-in for Premiere Pro or after affect. Now, where can I download Color Finesse and how I can install their Premier Pro or after affect?

    This series is only required for the CS4 version. The CS5 version does not require an additional set. Both versions are installed automatically with the main programs. Nothing more to do.

    Mylenium

  • bought an iMac that the previous owner had contracted the maverick OS10.9 and how do I get it installed on iMac?

    bought an iMac that the previous owner had contracted the maverick OS10.9 and how do I get it installed on iMac?

    KurtLang August 2014 post on the restoration of new computers that do not come with an optical disc - https://discussions.apple.com/message/26479617#26479617

    Khati January 2016 post on the use of network recovery - https://discussions.apple.com/message/29713317#29713317

    Post of February 2016 LINC Davis about the state machine to restore new - https://discussions.apple.com/message/29726244#29726244

Maybe you are looking for

  • How can I turn off shuffle on the latest ios 9. I don't care

    It was a maddening, any quest in the morning and I'm hoping someone can answer how to disable the option shuffle for IPAD. the reason for the caps is because I've been Googling all morning and every single response shows just iPHONE, screenshots, and

  • Restore the iTunes app data backup and backup to iCloud

    My iPhone 6 has been stolen. I got iCloud backup enabled, and the last backup was 2 days. I do a full backup encrypted via iTunes it also sometimes manually, the last time was 1 month ago. I bought a 6 new iPhone as a replacement. When I tried to res

  • You need to remove all files from the hard drive.

    Original title: I need to empty my drive hard so that I can reinstall windows XP - I bought new computer and put my old one family member... I don't want my personal info on my old computer.  I was told to empty / delete (?) my hard drive, then reins

  • Windows Vista WD external drive recognition problem

    Hello I bought the WD My Passport 1 TB external hard drive. While this works with windows xp and 7 computers, only not with vista. It is considered in respect of the computer but under my computer management/disk management, nothing is there except t

  • WVC200 camera and display of internet explore

    I am new to this, please be patient. I have spent the day to set up the camera and have it work on my network, office and portable wireless.  My problem is that no one else can access the camera via the internet Explorer using the IP: 192.168.1.4.  I