Where now are "Preferences"?

Similar Questions

• How can I keep the icons on the left of the toolbar to stay where they are?

  I have small icons for Outlook, Word and Firefox on the left side of my bar jobs and I want to stay all the way to the left, even when I have one or more of the open programs - as it was in earlier versions.  For example, if I have Outlook and some open word documents, these small icons disappear and the Firefox icon will float between the two sets of open programs.  I have even my taskbar stuck.  How can I fix it?

  In your description, icons to stay where they are.  For example, your first picture has Outlook as the first icon.  Then, in the photo next, Outlook is open, but it has not moved.

  So you really do want to move, or you want a duplicate show up more to the right, while the original icon still left?
  Sorry, but none of them are possible.  Icons will always remain where they are.  This Outlook is always #1 (or anywhere where you put it).
  This gives you some great benefits.  For example:
  • Outlook will always be the first icon, running or not.  Makes it easier to find, because it is always in the same place.
  • There is no overlap.  You do not have to have 1 button to Start Outlook, and then another button that is Outlook when it is started.  Less jostling on the taskbar with no duplicate icons.
  • You have only 1 place to look if you want to start Outlook, switch to it, if it is already running or look for small envelope icon that appears when you have new messages (it appears on the top of the Outlook icon now, if you have large icons active so it is in the House)
  • You can use keyboard shortcuts.  Press Windows + 1 will start (or switch to) the first button on the taskbar. In your case, it's Outlook.  If Outlook is moved above once you click top, your shortcuts numbers would change randomly.
  In short, the icons will always be where you put them. If you upgrade Outlook as the first icon, it will always be the first icon, even after that you click on it.

• How to make a loop with variable values depending on where you are in the loop

  Hello

  I need loops / nested loops that choose different figures depending on where you are in the loop.

  The entire function must operate at times 'ml '. 'ml' is a dynamic figure.

  Loop 1 = while the loop is the first 12 iterations, "exconemp" must be equal to 100. 13-24 iterations, 'exconemp' to 102.5 equal, for 25-36 TI 105.06, 37-48, it will be 107.69. This must change each 12th iteration until he reached 'ml '. The calculation takes the value of the previous 'exconemp' and then that multiply by 0.025.

  Loop 2 = while the loop is in 120 first iterations, 'abc' should be equal to 0.015 and additional iterations should use 0.01. It should also work in a way to know if 'ml' is greater or less than 120 and work accordingly.

  My main problem is - this - how can I get loops to go like this:

  While the iteration is < 12, to do this, THEN take the final figure (12th iteration) and begin the 13-24, make this SO etc etc.

  How to produce a THEN statement? I can get the code to pick up the final values, but does not change along the way.

  I think I might better create an array for loop 1, but I'm not entirely convinced of that. Also, I think it would be better/more net if I can get "month total 1 ' and ' month 2 total ' in loops, but do not know how to do this.

  The values I need to produce (only 36 first shown):

  1-12 = 125.55, 251,65, 378.31, 505.52, 633.29, 761.63, 890.53, 1019.99, 1150.03, 1280.63, 1411.81, 1543.57
  13-24 = 1679.05, 1815.12, 1951.79, 2089.06, 2226.93, 2365.41, 2504.50, 2644.20, 2784.52, 2925.45, 3067.00, 3209.18
  25-36 = 3355.19, 3501.85, 3649.15, 3797.11, 3945.71, 4094.96, 4244.87, 4395.44, 4546.68, 4698.57, 4851.14, 5004.38

  var ml = 240 / / dynamic figure, multiple of 12 up to 780
  var exconemp;
  var exconem = 100;
  var inf = 0.025;
  Tree var;
  var tec;
  power of the var;
  var fvis;
  var abc;
  var fvee;
  MVT var;
  function myfunction() {}
  
  Loop 1
  
  While (ml < = 12) {}
  exconemp = exconem;
  // }
  so that {(ml > 12)
  exconemp = exconem * inf;
  //}
  
  end loop 1
  
  trace ("exconemp =", exconemp); employee contribution
  
  tree = exconemp /(1-0.2)-exconemp;
  TEC = exconemp + tree;
  trace ('tree', tree);
  trace ("tec", tec);
  power = Math.pow (1 + 0.07, 1/12);
  
  Loop 2
  
  While (ml < = 120) {}
  ABC = 0.015;
  //}
  then {}
  ABC = 0.01;
  //}
  
  end loop 2
  
  fvis = power *(1-abc/12);
  trace ("fvis =", fvis);
  FVEE = tec * fvis;
  trace ("fvee =", fvee); month 1 total
  MVT = (CET + fvee) * fvis;
  trace ("MVT =", MVT); month 2 total
  //
  
  for (var i: Number = 0; i < ml; i ++)
  {
  MVT = (CET + MVT) * fvis;
  trace ("tfvloop =", MVT);
  }
  }

  I hope that I've explained this well enough.

  Thanks in advance.

  I think that will do it even if I don't quite get the numbers you posted.

  Stop();

  var ml = 48; figure dynamic, multiple of 12 up to 780
  var exconemp;
  var exconem = 100;
  var inf = 0.025;
  Tree var;
  var tec;
  power of the var;
  var fvis;
  var abc = 0.15;
  var fvee;
  MVT var;

  MyFunction();

  function myfunction()
  {
  exconemp = exconem;

  for (var index: uint = 1; index)<= ml;="">
  {
  trace(index + "--------------------------------");
             
  tree = exconemp /(1-0.2)-exconemp;
  TEC = exconemp + tree;
  power = Math.pow (1 + 0.07, 1/12);
  fvis = power *(1-abc/12);
  FVEE = tec * fvis;
                     
  if(index == 1)
  {
  trace ("month 1 total =", fvee);
  }
  another if (index == 2)
  {
  MVT = (CET + fvee) * fvis;
  trace ("month 2 total =", MVT); month 2 total
  }
  on the other
  {
  MVT = (CET + MVT) * fvis; now that we're here the MVT auto perpetuates on himself
  trace ("months" + index + "total =", MVT); month total n
  }
                     
             
  If (index %12 == 0)
  {
  exconemp = exconemp *(1+inf);
  trace ("changed to exconemp to:" + exconemp);
  }
             
  If (index % 120 == 0)
  {
  ABC =. 01;
  trace ("changed abc to:" + abc);
  }
             
  }
  }

• How can I create a separate address book? I'm not on a mailing list but an address book where addresses are not mixed with my usual address b

  How can I create a separate address book? I'm not on a mailing list but an address book where addresses are not mixed with my address book regularly. I already have three created for me by Thunderbird address books. Add all new addresses to one of those, I'm not afraid to remove the other address books, because some of their addresses are not repeated in my address book "main". So if I delete all the names in one of the existing books, I need to create a blank book that will not mix the addresses with those of an another address book. HOW CAN I CREATE AN ADDRESS BOOK EMPTY? I want to be able to create multiple mailing LISTS using the addresses in this new book, I will eventually have an address book special with a variety of mailing lists, that I can use as I want to.

  In the address book, file | New | Address book.

  No menu showing "file"? F10 or ALT.

• I have blown my motherboard on an old computer and hooked up my old hard drive to the new computer and want to transfer my favorites on the new drive but cannot find where they are located on the old drive - any help?

  My motherboard went bad on my old computer, but the hard drive was OK. I bought a new computer and plugged my old hard drive to it via a usb adapter. I would like to import or copy my favorites from the old hard drive to my new, but I can't find where they are. I was unable to determine the search for articles on the web. Be advised that my old hard drive is basically nothing more than a place of storage for files at this point. My old operating system is windows XP, and my new system is Windows Home Premium.

  https://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

  Your old profile is located here in Win XP and W2K:
  
  drive: \Documents and Settings\username Windows login\Application Data\Mozilla\Firefox\Profiles\profile_name

• where downloads are saved in itunes

  where downloads are saved in iTunes?

  [img] Captura_de_Tela_2015_12_09_s_14_37_14.PNG [line]

  In your library iTunes. by default, this will be music to your home folder in the folder. iOS applications cannot be run on a computer.

  (137014)

• Why did I suddenly lost the ability to view real images in any directory? I see now are drawn the same landscapes instead of each image. That's happened?

  Why did I suddenly lost the ability to view real images in any directory? I see now are drawn the same landscapes instead of each image. That's happened?

  Why did I suddenly lost the ability to view real images in any directory? I see now are drawn the same landscapes instead of each image. That's happened?

  Method #1

  Start button > in the search box, type options records > press the Enter key > click on view tab > under files and folders, uncheck "Always show icons, never thumbnails" > OK

  Method #2
   
  Start button > Control Panel > Classic view > systems > left column, system settings advanced > Performance tab, click on settings > tab Visual effects, click 'Show thumbnails instead of icons' > OK

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I have formatted my system and windows reloaded. Then, I clicked on it somewhere (do not remember on which/wher) now the systym not to see any how removable storage or don't want even to open a CD I put in...

  I have formatted my system and windows reloaded. Then, I clicked on it somewhere (do not remember on which/wher) now the systym not to see any how removable storage or don't want even to open a CD I put in...

  As you reinstalled just Vistas, you would have a very limited number of Restore Points!

  Try the system restore.

  If this does not work, and you don't know what you were doing, reinstall it again.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• Update at least a record where there are relationship

  Hi I have a situation where I have two tables, the thing that I have what it takes at least update a record where there are relationship for example I Organization table and table organisation_user

  If I have some relationship between this two table I have to malke column status = 'Active' in the table of organization

  something like that

  Update uam_organisations set registration_status = "A".

  where UAM_ORGANISATIONS.ORGANISATIONID = UAM_ORGANISATION_USER.ORGANISATIONID

  Another screenplay

  I have two tables organisation_user, adminstatus

  I what to do at least one user to be admin, I have 3 reviews in UAM_ORGANISATION_USER, but at least one user must be administrator

  Like this

  Update uam_organisation_user set ASSOCSTATCODE = "ADMIN".

  WHERE UAM_ORGANISATION_USER.ORGANISATIONID IS NOT NULL AT LEAST ONE USER MUST BE AN ADMINISTRATOR

  First condition:

  Update uam_organisations the RegistrationStatus value which is EQUAL = 'A'

  where ORGANISATIONID in (select ORGANISATIONID from UAM_ORGANISATION_USER)

  and REGISTRATIONSTATUS! = « A » ;

  Second requirement:

  Update UAM_ORGANISATION_USER

  Set assocstatcode = "ADMIN".

  where rowid in)

  Select get rid of)

  Select the rowid RID.

  Sum (decode (assocstatcode, 'ADMIN', 1, 0)) on admin_count (organisationid score),

  ROW_NUMBER() on rn (partition in order of organisationid by the user name)

  of UAM_ORGANISATION_USER

  where ORGANISATIONID is not null

  )

  where admin_count = 0 and rn = 1

  );

• I use a horizontal menu of the widgets library. All right, except that I would have any of the drop-down list list stay open after selecting the top item... and remain open after the selection of a menu under item - so that the viewer knows where they are

  I use a horizontal menu of the widgets library. All right, except that I wish I had the all menu drop-down list stay open when you have selected the top element. And when you have selected a menu SUP item - so that the viewer knows where they are in the navigation. Who is? Thank you!

  Hello

  There is no native function to Muse to achieve this goal. However, if you host your site on Business Catalyst, you can take advantage of the functionality of breadcrumbs. He won't let the open drop-down list stay, but it will show customers on what page they are and that he can see that they have followed to reach the page. For more information, please visit the following link http://helpx.adobe.com/business-catalyst/partner/add-breadcrumbs.html

  Kind regards

  Aish

• Where bookmarks are located so I can backup a dvd using burn now?

  I can't save my Firefox Favorites to the dvd. I've been back up Favorites (XP), but I just noticed that the bookmarks in that folder are not my current Firefox bookmarks that are displayed on the bookmarks Firefox "drop-down." Where are bookmarks to see them and burn them on dvd using Ulead burn now? I followed the path C: > docs and settings > username > application data > Mozilla but I couldn't find all the bookmarks in a folder in the folder of Mozilla. I wouldn't be able to see these bookmarks in a folder? Thank you for your time and your consideration. A.C.

  You can create a backup of the bookmarks HTML.

  • Bookmarks > show all bookmarks > import and backup > export bookmarks as HTML
  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

  Such a file can be opened in Firefox and is not difficult to interpret in a text editor (an HTML editor should do a better job).

• Friday fun: where do you want to be at the place where you are now?

  To be perfectly honest, it's really cold here in Vermont. That combined with just coming off vacation in Florida, I don't feel the atmosphere again for this time. I would rather be one of two places:

  -Mexico Cozumel on the beach with a Long Island Iced Tea in my hand

  -Rosen Creek Resort with all my buddies from EE12 hanging by the pool.

  Where will you be?

  (Oh and I made a new tag called friday_fun that we should use for these positions!)

  It is also cold enough in MY... sometimes colder inside my office than outside!

  For me, I would be in any tropical place, on a boat, by reading my Kindle. Drink of choice: margarita.

• lost my iphone contacts... now I can't find where they are on my computor... and if I find them how do I get back them on my iphone

  I tried to release the files... I totally messed up my laptop things back but it's a mess... and all my contacts have shown up on my desk... .filled screen gheezuzhchrist all what I did do... can solve this problem?

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• ENVY 100 scans documents and photos cultures, regardless of where they are placed.

  ENVY 100 scans of documents/photos cultures. Preview is fine, but not the final result. With the help of Mac OS 10.7.5.

  This scanner has always cropped my images or documents, even if then I see very well in the preview. Right now I'm scanning my passport. I have it lined up against the side (as it shows on the drawing on the scanner) and I see the entire image on the preview. However, when it comes to the final image, I get a version cropped my passport.

  Where can I go to fix this?

  Hello
  The default analysis workflows configured to scan photo 6 x 4 in. make sure you change the scanning settings to not crop the area swept as follows:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and asA4 or None value.
  7. click OK and try to scan.

  If you get an error when trying to change shortcut scan patch installation, and then follow the steps above to the following:

  http://FTP.HP.com/pub/softlib/software12/COL41827/MP-101648-1/HP_Scan_for_Mac_OS_X_10.7_Update.dmg

  Kind regards
  Shlomi

• imported files, but now are not not in the LR library

  I think that there is another aspect of different threads, but I can't find a specific answer.  My apologies if this is a matter of repeating.

  (Windows 10 6 Lightroom under the aegis of the CC, the pictures stored on an external drive, LR catalog on disk C).

  A single folder, which contains 44 photos, now appear only as 1 image in LR library.  If I go into the folder that contains 44 photos on the external hard drive to a re - import ('all images' search), 43 are gray gray, who I am able to see in the library's grey dark grey.  Needles to say, I can not re - import one of these images of gray.  This suggests that LR already has them cataloged somewhere.  However, when I search for them in the LR catalog, covering all of the records, they do not show.  I have tried this on both internal and external drives.  If on the one hand, LR seems to say "I already have them", but however he can not find them anywhere.  I also tried a search of Windows files for one of the specific images, and the only place where that might be present, not surprisingly, was to its rightful place on the external hard drive.

  My other files work fine, I have not moved the folder in question, it worked perfectly for a couple of days.  I tried to remove the file and re-import it, but LR "discovered" again as a picture on the 44.

  At a loss as to what to do next.  Should I restore an earlier backup catalog and see if that helps?

  This happens because you have probably (accidentally) imported photos using the COPY option instead of the Add option.

  The pictures are already in Lightroom. Import again is never a good idea and will usually cause significant disadvantages. You must use the Lightroom search tools to find photos in Lightroom, and then you will be able to modify or to do something else in Lightroom with these photos.

  Here's how the search.

  1. From your operating system, to determine the exact name of the file of one of these photos
  2. In Lightroom, on the left, click on all the pictures (its under the word 'Catalogue')
  3. In Lightroom, disable all filters (once or twice Ctrl-L)
  4. In Lightroom, use the view-> sort menu command-> file name, which puts all your photos in alphabetical order by file name
  5. In Lightroom, scroll upwards or downwards in the grid until you find what a file by file name in alphabetical order
  6. In Lightroom, right click on the picture, select view in the browser, and then you will know which folder Lightroom think that the photo is in