where to change the outgoing server

Similar Questions

• How can I change the SMTP server to any server I want to?

  This is a common situation, and I have seen many others ask a similar question. It is a simple question, but Thunderbird does not seem to allow it. In my case, I have a choice of two mail server outgoing. I can use my hosting company Godaddy or my Internet provider, the local cable operator Charter Web. By default, Tbird uses the same mailserver incoming and outgoing, if possible, so my e-mail account has been configured to use the outgoing Godaddy server.

  I would prefer, however, to use the local server SMTP of Charter. But I can't find any way to change to that of Tbird. I could do it in Outlook Express, because both servers are listed for each e-mail account and can be changed.

  In Tbird, there is a drop down menu to choose an outgoing server, with no way to simply type in a new server. Or am I missing something? I think not, because others report the same problem. I have vague memories that awhile back, Tbird would you allow to specify all server to an e-mail account settings and then test their validity before finishing - a manual of against an automated way to set up an account.

  The main thing is I want to review the outgoing server of what I want, but it doesn't seem to be a way to do it.

  When your problem has been fixed can you mark the thread as "solved" Please?
  Thank you.

• Why can't I change my outgoing server name?

  Verizon sent me notice that I have to change my outgoing server name. When I enter the settings of Thunderbird, there are about 3 choices in the drop-down list for the outgoing server none of them are what I need and Thunderbird will not allow me to enter a new name in this field.

  Maybe a picture will help you get to the correct place.

• Changing the DNS server for ESX hosts?

  Our network administrator will change the IP address of the DNS server.  In this way, we will change those corresponding to ESX hosts.

  We would like to know

  (1) can we change the DNS server on execution of the ESX hosts without going into maintenance mode?

  (2) under what circumstances the ESX host will do use DNS servers?

  (3) memory, we should add all the IP addresses of ESX host in the hosts file in the Service Console, where is this hosts file located at?

  Thank you

  Tony,

  Use "service network restart" command to restart the network service

  Do not forget also that...

  Very dependent on DNS HA, HA will not work without the correct DNS configuration. The servers ESX and vCenter server must be able to resolve the name (FQDN full) / IPs in both feel to get a working HA.

• Where to put the report server ip and port for the Siebel server?

  Hello

  Where to put the report server ip and port for the Siebel server? I have checked the document "Reports Siebel Guide" but does not know where is the configuration section ' ip address of the server and port ' for 'Oracle BI Publisher.

  Note: I have installed BI Publisher, now necessary to define the ip editor and siebel server port.

  Please help, thanks.

  Hello

  Communication between Siebel and BEEP coming through webservices. You must set the Siebel Outboundwebservice 'PublicReportService' address to address BI Publisher.

  Similarly, the address of the webservice Siebel Inbound 'BIPSiebelSecurityWS' will be used by BEEP setting under the security model of Siebel - Siebel end Webservice poin of connecting to Siebel EAI, data inorder of success authenticate the Siebel user to perform the tasks of report being initiate Siebel UI.

  Please go through the integration document attached to the thread "Re: ADVISE WEBCAST: BI Publisher 11g Configuration with Siebel", it is any integration Siebel with BEEP 11g steps. " But if you go through each step, there are details about why we do it. Through this way you can better understand the integration.

  I hope this helps.

  Thank you
  Maria

• I can't find where to change the name of the company.

  I already have an account, but I would change my company name in my account. I can't find where to change the name of the company.

  Hello

  Please visit https://helpx.adobe.com/x-productkb/global/adobe-change-of-name-form-and-procedure.html

  Or you can contact our support here: https://helpx.adobe.com/contact.html

  Let us know if this helps!

• I have a trial version of Acrobat Pro DC and can't find where to change the menus of Português to the English, to the Brazil am but my Windows 7 Home Premium is all in English

  I have a trial version of Acrobat Pro DC and can't find where to change the menus of Português to the English, to the Brazil am but my Windows 7 Home Premium is all in English.

  If someone could help it would be appreciated. Frankly, the online help is useless, programmers are testing what they do with real users?

  Thank you

  Darren

  Hello

  Open Acrobat

  Go in Edition > Preferences > language

  In the pane on the right language

  Click on the drop down to the language of the application

  Select the option choose to start the Application

  Click Ok and close the Acrobat

  Launch Acrobat and it will give you a prompt first select a language.

  Choose English and Ok

  Thank you

  Abhishek

• About Adobe Reader DC, I can't find where to change the preferences to not check the updates.

  About Adobe Reader DC, I can't find where to change the preferences to not check the updates.  Can you tell me how to prevent the automatic updates?

  Hi bonnies15119755,

  You cannot change the preferences to update for Adobe Acrobat Reader DC Adobe Reader and Acrobat updater settings | DC, XI.

  Kind regards

  Nicos

• Where (how to change the SMTP server

  Hello
  I use the OAS 10.1.2.0.2
  While installing OAS, I entered the name of the actual working SMTP - Server group.
  Sending the mails worked fine until today.
  Now, changed the name of the SMTP server and I wanted to change it (the name) in the application server, but I have not found one/all such location s where I had to change the name of the SMTP server.
  
  Is there anyone who can help me?
  
  Thank you very much.
  
  Best regards.
  
  Florian

  Refer to this:
  http://download.Oracle.com/docs/CD/B14099_19/core.1012/b13995/reconfig.htm#sthref681

  Thank you
  Shail

• How can I change the outgoing in El Capitan mail port settings?

  My internet service provider recently changed the messaging port coming out (IMAP). How do I change this setting? I can receive messages but not send it. I can send email from the provider's Web site. It's already happened and usually I can send emails for several days. I changed the port settings in the past, but did not figure how to do it since the upgrade to El Capitan.

  If you know where to put the port, but it is not enabled, uncheck the box marked automatically detect and manage settings. Then, you should be able to change the port.

  The outgoing port will be in the SMTP settings. Each account has a configuration which you can access by selecting Edit from the context menu of SMTP.

• Changing the vCenter Server IP address

  I am trying to build a new vCenter environment, we are currently waiting on IP ports and patch our networks team but I would "If I can" start building the server vCenter for this environment, there will be a virtual server.

  We have a test environment in place for the moment that we have a shared iscsi data store that once the environment has been built, we can remove from the inventory and add to the new environment once completed.

  Can we see problems with IP addressing if I build the server with a temp IP then import into my new environment and then change the IP address?

  Yes,

  As you say you have a DB server as physics that won't change, even if you go for the production.

  So, all that you requested

  (1) SSO - for SSO db if you use existing DB for this tha'ts then fine, but if you plan to have additional server to DB, you will find difficulty

  (2) SQL server for VC - as you said that you use existing DB... It is very good

  (3) installing vcenter server and inventory... require you to have details of the SSO server. If you use the IP agreement for the installation of VC, there is difficulty, where you must uninstall VC and inventory services.

  Kind regards

  Sachin Bhardwaj

• Change the DNS server, but consider e-mail to Office 365

  I now have a customer who wants his site softdanmark.dk moved and accommodated with catalyst for business as the new design I've done for the company by muse and previewed as: softdanmark.businesscatalyst.com.

  I've already added the domain name to Business Catalyst and gave him the dns data, but he still wants the email (MX) belong to the TDC, where he has his Office 365.

  Is it possible to only move the DNS server and keep the MX record at the old company?

  

  Hope you can answer my question.

  Hey there,

  You do not change the NS records, all you need to do is point the web traffic, so yes, have your screenshot you just need to change the record and when you set up the site in British Colombia you say outside.

  Registration information are:

  Adding a domain name to your site and take the live site

• ColdFusion Launcher does not accept the password when you try to change the web server

  I know this will sound stupid as wrong password is a password wrong, right? Well I swear I know my passwords and it's not having it.

  I am running coldfusion 9 and I want to change the default internal server that I put it to the top with the installation on apache server that ships with mac OS x. So I started the coldfusion launcher and clicked the button Web server connection utility to set up, he asks a password to continue, but usually accept it... I tried both of the passwords that I use for stuff course where I was confused which it requested one, but is not having either.

  I tried to change the password for the coldfusion administrator and still no joy. I know that sounds stupid, but I do not understand... How can I get if she does not accept my admin password... I have tried uninstall and try again once like stuff as it is a nightmare to get rid of my experience... always leaves a file somewhere that you can never seem to isolate who mucks upward following installation so I left it for the moment. Anyone got any ideas?

  OK, you cannot double-click the wsconfig file, cause, then you are not running it as sudo, so you will not be allowed.  'sudo' is 'Super user' and allows you to run a program, temporarily, as a super user.  If you do that you won't have permission to edit the httpd config file.

  Try the following.

  Launch the Terminal

  type: cd/Applications/ColdFusion9/runtime/lib (change the correct path if it is not the path to your ColdFusion)

  Press enter

  type: sudo java-jar wsconfig.jar

  Press enter

  It should ask you for your password. Enter it and press ENTER again.

  It should launch the configuration tool, this time with the appropriate permissions to modify the file httd.conf.

  Good luck

• can not change the dns server, always comes back.

  10.10.5 Yosemite

  My ISP has provided DNS servers are terrible and I still get messages "site is not reachable. I'd like to change the DNS from Google or Open DNS servers

  In SYSTEM preferences > network > DNS tab I delete 2 default entries & entry "8.8.8.8" & "8.8.4.4" (google dns)
  In the "areas of research" box, there are 2 entrances & I can't delete them.

  I click OK & apply - when I go back to the DNS tab, it was the old DNS.

  What should do?

  

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Quit the application.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to Preferences/com.apple.systempreferences.plist.  Move the .plist on your desktop.

  Restart your computer, open the application and test. If it works fine, delete the plist for the office.

  If the application is the same, return the .plist where you got it, crushing the latest.

  Thanks to leonie for certain information contained in this.

• I can't send mail to one of the two accounts of e-mail with the outgoing server.

  Recently, I was unable to send an email to one of the two accounts which are the two aol. One of them is netscape. They both use the same outgoing server 'smpt.aol.com' I've tried the suggestion to remove the password on behalf of netscape (the one I can't send). Now I get a 5.7.1 sender address rejected. I'm sure this is a settings problem and probably a dealing with passwords, but I just can't solve. Help!

  I checked both accounts and servers as you suggest. The first time he asked me, he said that have been rejected. When I pressed try again, it has been accepted, and now everything seems to work fine. Thanks a lot to you two. I really appreciate it.