Where to find names for the buttons and toolbars for userChrome.css?

Similar Questions

• How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  Here is the error

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 219949
  Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
  Info: Treatment 219949 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 881 the application author does not match the author token of debugging

  The author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.

  If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.

• What is the name of the button "mute" (for KeyCodeEvent)

  I try to use EventInjector.KeyCodeEvent to simulate a button press "mute", but I can't find the keyName for her?

  No one knows what is the name of the button mute? Or what I'm trying to do is put in standby mode, the unit is an easier way to do this?

  Thanks in advance for your suggestions!

  The desired key code is Keypad.KEY_SPEAKERPHONE.  It is marked in the API as the "speaker" button, but in fact, it mutes and restores the sound of the phone.  You can simulate with EventInjector by getting the key part of the code of the key and cast on a float:

  (char) Keypad.key(Keypad.KEY_SPEAKERPHONE)
  

• How do you find the name of the Group and channel your TDMS file name?

  How do you find the name of the Group and channel your TDMS file name?

  Nevermind, I've used the file viewer.

• Where to find drivers for Win Vista LAN, BT and Wifi for Aspire V3 - 571G?

  Where to find drivers for Win Vista LAN, BT and Wifi for Aspire V3 - 571G?

  

  Try this, 100% reliable Web site:

  http://www.station-drivers.com/index.php/downloads/func-startdown/633/

• Script of VM inventory for VM name with the location, the name of the Cluster and data storing total size and free space left in DS.

  Hello

  I wanted to collect script inventory VM VM name with location, name of the Cluster and data store total size and free space left in Datastore.I have script but his mistake of shows during its execution. Any help on this will be apreciated.

  Thank you

  VMG

  Error: -.

  Get-view: could not validate the argument on the parameter "VIObject". The argument is null or empty. Provide an argument that is not null or empty, and then try
  the command again.
  E:\script\VM-DS-cluster.ps1:7 tank: 20
  + $esx = get-view < < < < $vm. Runtime.Host - name of the Parent property
  + CategoryInfo: InvalidData: (:)) [Get-view], ParameterBindingValidationException)
  + FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutomation.ViCore.Cmdlets.Commands.DotNetInterop.GetVIView

  Get-view: could not validate the argument on the parameter "VIObject". The argument is null or empty. Provide an argument that is not null or empty, and then try
  the command again.
  E:\script\VM-DS-cluster.ps1:8 tank: 24
  + $cluster = get-view < < < < $esx. Parent - the name of the property
  + CategoryInfo: InvalidData: (:)) [Get-view], ParameterBindingValidationException)
  + FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutomation.ViCore.Cmdlets.Commands.DotNetInterop.GetVIView

  Get-view: could not validate the argument on the parameter "VIObject". The argument is null or empty. Provide an argument that is not null or empty, and then try
  the command again.
  E:\script\VM-DS-cluster.ps1:9 tank: 24
  + += get-view $report < < < < $vm. Store data-name of the property, summary |
  + CategoryInfo: InvalidData: (:)) [Get-view], ParameterBindingValidationException)
  + FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutomation.ViCore.Cmdlets.Commands.DotNetInterop.GetVIView

  It seems that your copy/paste lost some.

  I have attached the script

• Re: Satellite A665 - 16K: touch the buttons and the question of the FN functions

  Hello

  I have a problem with the Satellite A665 - 16 k: press the buttons and FN functions. When I install pvat they stop working, but when I uninstall the pvat only some of them work.

  How to fix? Model mu has a keyboard backlight and mine has a problem?

  > When I install pvat they stop working, but when I uninstall the pvat only some of them work.
  The current situation of the article, but I would like to know what you've done in the past. As far as I know, and my own experience, FN keys can not stop working without any reason.
  Are you using the original OS from Toshiba that was preinstalled on your laptop (WIN7 64 BIT HOME PREMIUM)?

  Usually after installing fresh PVAT everything should work again. Akuma wrote install the version of the TOSHIBA Flash Cards 1.63.0.6C support utility but do it before installing PVAT.
  > Model mu has a keyboard backlight and mine has a problem?
  I m really confused that you don't know if your laptop has this keyboard or not. Have you checked laptop specification before you bought it?
  Please read the manuals for the user's document. You will find all the info on your laptop, on the use of hardware and software. Somehow, I think you don t know what you have before you.

  Anyway, the control button Z as akuma wrote. You can also change the settings of the keyboard backlight.
  Open Toshiba Assist > optimize > HWSetup. You can find it here.

• Where to find driver for XP64 PA3570E-1ETA mice.

  Hello.
  Where to find driver for XP64 PA3570E-1ETA mice.

  Hello

  Didn t you receive any disk containing the necessary software (driver or tool)?
  Usually, this disc should be part of the package if the pilots but in addition should be.

  But I think it is a plug-n-play USB mouse and usually you can use it with the standard USB drivers that are part of the Windows operating system.

• Is it possible to define the name of the path and inside the MSI log file

  Is it possible to define the name of the path and inside the MSI log file, so that it should not be set from the command line.  This way just race the msi causes always a logfile in a specific path and the file name?

  Read the following article and see if it helps.  In my view, it is possible to use InstallShield, but I'm not sure.  It's just a little out of my League. http://www.flexerasoftware.com/webdocuments/PDF/msi_writing_to_the_log_file.pdf.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I retrieve the name of the server and the database to a system dsn

  Hello

  I am trying to create a database that will be used by many stores. Each store has its own server and the database and the access runtime version. I want to create a system dsn name, but allowing the administrator to modify the server and the database for that dsn and then, when you connect to the database, the database must be able to find this DSN and the 'new' name of the server and name of 'new' database and connect to point to this server and the database tables. I don't have a login form and I can get the name of the dsn, but I can't find a way to get the server name and database name for that dsn. Does anyone know a way to retrieve this from the registry. I can see it using regedit but have no idea on how to get this in vba access.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Problems with the list of the button and drop-down list

  Hello
  
  I want my users to view revenue by country or city...
  
  to select country I use a "list of the button' and for the city I'm on a 'combo '... When my select user a country, the cities of filtered accordingly... everything works fine, except the following (it is in step 3):
  
  Step 1. When I select a country (let's say canada) report gives me an appropriate set of data...
  Step 2. When I filter in a city (let's say Toronto) everyting works very well according to the filter...
  Step 3. When I select another country (let's say the USA), I get no data displayed on my report but good news, it's that my drop down the city will update accordingly
  Step 4. to get the required data, I have to change city (let's say Chicago)...
  
  
  what I want is that when my user select another country (step 3)... then the report should display data for all cities and I used the logical
  
  Select rev table_country
  where
  (b.City =
  CASE
  When: P49_CITY = 'ALL' THEN b.City
  OTHERWISE: P49_CITY END)
  
  somehow, I want the P49_CITY to 'ALL' value when the user selects a country
  
  Please advice

  Hello

  This is the way of simply to do.

  1 make the country select list (P49_COUNTRY) a select list with submit
  2. create a conditional branch that dates back to the 49 Page
  3 do the conditional branch of type PL/SQL Expression. In the expression 1 enter

  :REQUEST = 'P49_COUNTRY';
  

  4. in the value of these items , enter P49_CITY and let these values in white.

  So when the country is changed the page will be submitted, take over the management of the status of the page and in the process put the city at null.

  Kind regards

• How to put a table as parameter name in the name of the cursor and the header as a variable?

  Hello
  
  I have the code:
  

  create or replace procedure transpose_table_row2column(table_source IN VARCHAR2 ,table_result IN VARCHAR2) is
  
  -- set serveroutput on;
  
  v_nazwa_kamp      varchar2(100);
  v_czas_start      date;
  v_czas_stop       date;
  err_code          varchar2(50);
  err_msg           varchar2(2000);
  
  cmd_1_drop        varchar2(50);
  cnt_1             pls_integer;
  cnt_2             pls_integer;
  cnt_3             pls_integer;
  cnt_4             pls_integer;
  v_col_name        varchar2(50);
  test              varchar2(5);
  
  -- deklaracja wyjatku dla nieistniejacej lub niedostepnej tabeli
  TableDoesNotExist     EXCEPTION;
  PRAGMA EXCEPTION_INIT(TableDoesNotExist, -942);
  
  -- nazwa pierwszej kolumny tabeli zrodlowej
  cursor first_column is
      SELECT column_name FROM USER_TAB_COLUMNS WHERE TABLE_NAME = upper(table_source) and column_id = 1;
  
  -- wartosci z pierwszej kolumny tabeli zrodlowej
  cursor first_col_data_header is
         select v_col_name from table_source;
  
  
  
  begin
  
  test := 'true';
  v_nazwa_kamp := 'transpose_table_row2column';
  v_czas_start := sysdate;
  
  
  -- sprawdzenie czy istnieje tabela zrodlowa
  BEGIN
           EXECUTE IMMEDIATE 'SELECT count(*) FROM ' || table_source INTO cnt_4;
  EXCEPTION
           WHEN TableDoesNotExist
           THEN
               test := 'false';
               err_code := SQLCODE;
               err_msg := substr(SQLERRM, 1, 2000);
               INSERT INTO log_errors (time_err, object_name, campaign_name, error_number, error_message)
               VALUES (sysdate, 'transpose_table_row2column', v_nazwa_kamp, err_code, err_msg);
               COMMIT;
           
           WHEN NO_DATA_FOUND
           THEN
               test := 'false';
               err_code := SQLCODE;
               err_msg := substr(SQLERRM, 1, 2000);
               INSERT INTO log_errors (time_err, object_name, campaign_name, error_number, error_message)
               VALUES (sysdate, 'transpose_table_row2column', v_nazwa_kamp, err_code, err_msg);
               COMMIT;
               
           WHEN OTHERS
           THEN
               test := 'false';
               err_code := SQLCODE;
               err_msg := substr(SQLERRM, 1, 2000);
               INSERT INTO log_errors (time_err, object_name, campaign_name, error_number, error_message)
               VALUES (sysdate, 'transpose_table_row2column', v_nazwa_kamp, err_code, err_msg);
               COMMIT;
  END;
  
  
  
  -- jesli istnieje tabela zrodlowa to przetwarzamy
  if test = 'true' then 
  
  
  
  -- pobieram nazwe pierwszej kolumny tabeli zrodlowej
  for v_first_column in first_column
  loop
    v_col_name := v_first_column.column_name;
  end loop;
  
  
  -- sprawdzenie czy istnieje tabela docelowa, jesli tak to trzeba usunac
  select count(*) into cnt_1 from user_tables t
  where t.table_name = upper(table_result);
  
  -- jesli istnieje tabela docelowa to usuwamy
  if cnt_1 > 0 then
     cmd_1_drop := 'DROP TABLE ' || table_result;
     execute immediate cmd_1_drop;
  end if;
  
  
  
  -- pobranie liczby wierszy tabeli zrodlowej - nalezy stworzyc tyle samo kolumn w tabeli docelowej
  -- ponizej sprawdzenie czy w pierwszej kolumnie tabeli zrodlowej sa unikalne wartosci - jesli nie to nie mozna 
  -- transponowac tabeli poniewaz musi ona miec te wartosci jako naglowki nowej tabeli i musza wystepowac one tylko 1 raz
  execute immediate 'select count(' || v_col_name || ') from ' || table_source into cnt_2; 
  execute immediate 'select count(distinct ' || v_col_name || ') from ' || table_source into cnt_3; 
  
  
  -- jesli wartosci w 1 kolumnie sa unikalne to przetwarzamy dalej
  if cnt_2 = cnt_3 then
  
  
  
  -- tutaj rozpoczynamy odczytywanie tabeli zrodlowej i tworzenie nowej przetransponowanej tabeli
  
  for v_first_col_data_header in first_col_data_header
  loop
    DBMS_OUTPUT.PUT_LINE(': ' || v_first_col_data_header.v_col_name);
  end loop;
  
  
  
  
  
  
  
  
  v_czas_stop:= sysdate;
  
  insert into log_campaigns (campaign_name, time_start, time_stop, records_count, time_diff_min)
  values (v_nazwa_kamp, v_czas_start, v_czas_stop, cnt_2, round((v_czas_stop - v_czas_start) * 24 * 60, 2));
  commit;
  
  
  end if;
  end if;
  
  
  EXCEPTION
         WHEN OTHERS THEN
            err_code := SQLCODE;
            err_msg := substr(SQLERRM, 1, 2000);
  
            INSERT INTO log_errors (time_err, object_name, campaign_name, error_number, error_message)
            VALUES (sysdate, 'transpose_table_row2column', v_nazwa_kamp, err_code, err_msg);
            COMMIT;
  
  end transpose_table_row2column;

  and I don't know how to create the slider:

  cursor first_col_data_header is
         select v_col_name from table_source;

  I have error this table does not exist
  because table_name is the name of the parameter and v_col_name is variable which I initialize later in the code:
  

  for v_first_column in first_column
  loop
    v_col_name := v_first_column.column_name;
  end loop;

  Thanks for help

  Here is the code you are looking for:

  create or replace procedure transpose_table_row2column (table_source IN VARCHAR2, table_result IN VARCHAR2) is

  -set serveroutput on;

  v_nazwa_kamp varchar2 (100);
  date of v_czas_start;
  date of v_czas_stop;
  err_code varchar2 (50);
  err_msg varchar2 (2000);

  cmd_1_drop varchar2 (50);
  cnt_1 pls_integer;
  cnt_2 pls_integer;
  cnt_3 pls_integer;
  cnt_4 pls_integer;
  v_col_name varchar2 (50);
  test varchar2 (5);

  -deklaracja wyjatku dla nieistniejacej lub niedostepnej tabeli
  TableDoesNotExist EXCEPTION;
  PRAGMA EXCEPTION_INIT (TableDoesNotExist,-942);

  -name pierwszej kolumny tabeli zrodlowej
  l_first_column varchar2 (32767): = 'SELECT column_name FROM USER_TAB_COLUMNS WHERE TABLE_NAME = upper(:table_source) and column_id = 1';

  -z pierwszej kolumny tabeli zrodlowej wartosci
  l_first_col_data_header varchar2 (32767).
  first_col_data_header sys_refcursor;
  l_first_col_data varchar2 (32767).

  Start

  test: = "true";
  v_nazwa_kamp: = 'transpose_table_row2column ';
  v_czas_start: = sysdate;

  -sprawdzenie czy istnieje image zrodlowa
  BEGIN
  EXECUTE IMMEDIATE ' SELECT count (*) FROM "| table_source INTO cnt_4;
  EXCEPTION
  WHEN TableDoesNotExist
  THEN
  test: = "false";
  err_code: = SQLCODE;
  err_msg: = substr (SQLERRM, 1, 2000);
  INSERT INTO log_errors (campaign_name, time_err, object_name, error_message, error_number)
  VALUES (sysdate, 'transpose_table_row2column', v_nazwa_kamp, err_code, err_msg);
  COMMIT;

  WHEN NO_DATA_FOUND
  THEN
  test: = "false";
  err_code: = SQLCODE;
  err_msg: = substr (SQLERRM, 1, 2000);
  INSERT INTO log_errors (campaign_name, time_err, object_name, error_message, error_number)
  VALUES (sysdate, 'transpose_table_row2column', v_nazwa_kamp, err_code, err_msg);
  COMMIT;

  WHILE OTHERS
  THEN
  test: = "false";
  err_code: = SQLCODE;
  err_msg: = substr (SQLERRM, 1, 2000);
  INSERT INTO log_errors (campaign_name, time_err, object_name, error_message, error_number)
  VALUES (sysdate, 'transpose_table_row2column', v_nazwa_kamp, err_code, err_msg);
  COMMIT;

  END;

  -jesli istnieje image zrodlowa at przetwarzamy
  If test = "true", then

  -pobieram nazwe pierwszej kolumny tabeli zrodlowej
  run immediately l_first_column in v_col_name using table_source;

  -sprawdzenie czy istnieje image docelowa, tak jesli to trzeba usunac
  Select count (*) in the user_tables cnt_1 t
  where t.table_name = upper (table_result);

  -jesli istnieje image docelowa at usuwamy
  If cnt_1 > 0 then
  cmd_1_drop: = 'DROP TABLE ' | table_result;
  immediately run cmd_1_drop;
  end if;

  -pobranie liczby wierszy tabeli zrodlowej - nalezy stworzyc tyle samo kolumn tabeli w docelowej
  -czy sprawdzenie ponizej w pierwszej kolumnie zrodlowej his unikalne wartosci tabeli - jesli nie to nie mozna
  -transponowac tabeli poniewaz musi ona IMCs you wartosci tabeli nowej naglowki jako I musza wystepowac a tylko 1 raz
  run immediately "select count (' |)" v_col_name | ') de ' || table_source in cnt_2;
  run immediately "select count (distinct ' |)" v_col_name | ') de ' || table_source in cnt_3;

  -jesli wartosci w 1 kolumnie his unikalne to przetwarzamy dalej
  If cnt_2 = cnt_3 then

  -tutaj rozpoczynamy tabeli zrodlowej odczytywanie I create nowej przetransponowanej tabeli
  l_first_col_data_header: = 'choose ' | v_col_name | 'from ' | table_source;
  Open the first_col_data_header for l_first_col_data_header;
  loop
  extract the first_col_data_header in l_first_col_data;
  When the output first_col_data_header % notfound;
  DBMS_OUTPUT. Put_line (': ' | l_first_col_data);
  end loop;

  v_czas_stop: = sysdate;

  insert into log_campaigns (campaign_name time_start time_stop, records_count, time_diff_min)
  values (v_nazwa_kamp, v_czas_start, v_czas_stop, cnt_2, round ((v_czas_stop-v_czas_start) * 24 * 60, 2));
  commit;

  end if;
  end if;

  EXCEPTION
  WHILE OTHERS THEN
  err_code: = SQLCODE;
  err_msg: = substr (SQLERRM, 1, 2000);

  INSERT INTO log_errors (campaign_name, time_err, object_name, error_message, error_number)

  VALUES (sysdate, 'transpose_table_row2column', v_nazwa_kamp, err_code, err_msg);
  COMMIT;

  end transpose_table_row2column;

• What exactly happens when you change the name of the computer, and it asks you to restart?

  What exactly happens when you change the name of the computer, and it asks you to restart - relating to the registration and identification of network?  Specifically when a computer isn't yet in one area but is still in a working group.  Y at - it show any PC by informing other computers it's name has changed?

  Computers into working groups are actively seeking each other, so if you rename a computer, it will not be shown anything. The restart is to erase the name of origin since the system cache, he will think that it's always the old name until the reboot takes place. Work computers is simply 'shake hands' with each other whenever they need to communicate.

  Computers that are part of a domain are created a 'computer' account that is assigned a random password that changes every 30 days by default automatically. These computer accounts work almost identical to an Active Directory user account, which means that they are not proactive they simply cached credentials with their permissions to provide if / when requested by heritage in the environment.
  Users and computers Active Directory accounts are stored in the NTDS. SAID the database, the backbone of an AD environment. When a computer name changes in one area, it takes the PC restarted simply for the PC. The change of name in Active Directory will replicate throughout the environment based on the settings of replication of this environment.
  I'm too simplify all this, but the general concept is there.

• «operation cannot complete error 0 x 00000709.» Double check the name of the printer and make and make sure that the printer is connected to the network. »

  Original title: Error 0 x 00000709...

  Error 0 x 00000709... I get this message because I bought a new laptop printer a canon IP100.   My computer won't let me not choose as a default printer at all and it comes up with this message:

  «operation cannot complete error 0 x 00000709.»  Double check the name of the printer and make and make sure that the printer is connected to the network. »

  I had trouble terrible., the only way I was able to use it is to remove the other printer but then again used I would have like a detauls.

  Can someone tell me how to fix this error, I would apreciate any help I could get with that.  I have two printers in the same time, one for the front desk and the other mobile.  I'm sure that someone out there knows what to do?  Thank you

  Hello

  Please follow the suggestions posted on April 16, 2013 by me from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/printing-error-0x00000709-when-i-try-to-make-my/a8235379-07ad-487e-b9e8-e041f3a715ee

  Please back up the registry before making changes.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope that the information provided is useful. Do not respond if you need more help.

• connect and view the name of the mother and the child

  I have a table with ID, name, ParentID columns.  I have this request to show the ParentID. relationship ID.

  Select ParentID, ID from t1

  Connect prior ID = ParentID;

  Now, I want to get the name of the mother and child for each record.  The output would be ParentID | ParentName | ID | ChildName.  How I change the query to do this.  Thank you very much.

  I think that you he complicated:

  Select the id prerequisite parent_id,.

  parent_name previous name,

  ID child_id,

  name child_name

  from t1

  Start by parentid is null

  connect by parentid = prior id

  order by parent_id,

  child_id

  /

  PARENT_ID, CHILD_ID CHILD_NAME PARENT_NAME
  ---------- -------------------- ---------- -----------
  3 the King James 1
  3 4 Martin King
  5 Adams 2 Smith
  3 King
  5 Adams

  SQL >

  SY.