where to locate the report of USE it in TestStand 4.2 release?

Hello

I need to change the statement USE for start times and Date. I thought that I can find it on PreUUT reminder under parameters variable that specifies the last version of teststand. Do you know where to find them on TestStand Version 4.2?

appreciate your help.

Thank you

val87

Hi val87,

Thanks for the clarification! I think I found the location of the start and Date times. TestStand 4.2, they are located in the reminder of the sequence "Test report" instead of "PreUTT". Here's a screen shot where I found it.

I hope this helps!

Tags: NI Software

Similar Questions

  • Can you please tell me where to locate the Windows Explorer with Windows Vista?

    Can you please tell me where to locate the Windows Explorer with Windows Vista?

    Thank you for your sincere help.

    Start | All programs | Accessories | Windows Explorer. Or, just use the Windows key and the E key.

  • Where to put the report server ip and port for the Siebel server?

    Hello

    Where to put the report server ip and port for the Siebel server? I have checked the document "Reports Siebel Guide" but does not know where is the configuration section ' ip address of the server and port ' for 'Oracle BI Publisher.

    Note: I have installed BI Publisher, now necessary to define the ip editor and siebel server port.

    Please help, thanks.

    Hello

    Communication between Siebel and BEEP coming through webservices. You must set the Siebel Outboundwebservice 'PublicReportService' address to address BI Publisher.

    Similarly, the address of the webservice Siebel Inbound 'BIPSiebelSecurityWS' will be used by BEEP setting under the security model of Siebel - Siebel end Webservice poin of connecting to Siebel EAI, data inorder of success authenticate the Siebel user to perform the tasks of report being initiate Siebel UI.

    Please go through the integration document attached to the thread "Re: ADVISE WEBCAST: BI Publisher 11g Configuration with Siebel", it is any integration Siebel with BEEP 11g steps. " But if you go through each step, there are details about why we do it. Through this way you can better understand the integration.

    I hope this helps.

    Thank you
    Maria

  • How to submit the report BEEP using the CONCSUB utility

    Hi all

    I presented the report BEEP using the Concsub utility. But I got the xml instead of PDF output.

    I found that the page layout is not attached with this concurrent program.

    Please guide me how to add the layout with this simultaneous program when sending through CONCSUB.

    Kind regards
    Karim

    Published by: karim on November 5, 2012 13:32

    Ok

    I tried and I can't say how it works, but there work ;)

    step by step for r12
    -create a XXAND17 cp
    -create data XXAND17 definition
    -create the XXAND17 model

    [oracle@oebs out]$ CONCSUB APPS/APPS FND 'Application Developer' SYSADMIN WAIT=N CONCURRENT FND XXAND17
    Submitted request 9915625 for CONCURRENT FND XXAND17
    
    cd $APPLCSF/$APPLOUT
    

    and see the o9915625.out to open it and it's xml data. then ok

    [oracle@oebs out]$ CONCSUB apps/apps FND 'Application Developer' SYSADMIN WAIT=N CONCURRENT XDO XDOREPPB Y 9915625 0 XXAND17 en N RTF RTF
    Submitted request 9915626 for CONCURRENT XDO XDOREPPB Y 9915625 0 XXAND17 en N RTF RTF
    

    See o9915626.out open it and it isn't xml
    It looks like word doc

    {\rtf1\ansi\deff0
    {\fonttbl
    {\f0 Arial;}
    {\f1 Times;}
    {\f2 Courier New;}
    {\f3 Calibri;}
    }
    ...
    

    copy on the local computer and rename it to o9915626.rtf
    opened by the word and she is out as well report

    so conclusion:
    XDOREPPB works fine but not rename output way output format (rtf in my case)

    If this is a bug or a profile must be defined

    -Add

    SQL> select LOGFILE_NAME, OUTFILE_NAME from fnd_concurrent_requests r
      2  where request_id in (9915625, 9915626)
      3  /
    
    LOGFILE_NAME                                                                     OUTFILE_NAME
    -------------------------------------------------------------------------------- --------------------------------------------------------------------------------
    /oracle/VIS/inst/apps/VIS_oebs/logs/appl/conc/log/l9915625.req                   /oracle/VIS/inst/apps/VIS_oebs/logs/appl/conc/out/o9915625.out
    /oracle/VIS/inst/apps/VIS_oebs/logs/appl/conc/log/l9915626.req                   /oracle/VIS/inst/apps/VIS_oebs/logs/appl/conc/out/o9915626.out
    
    SQL> select * from fnd_conc_req_outputs where concurrent_request_id  in (9915625, 9915626)
      2  /
    
    CONCURRENT_REQUEST_ID  OUTPUT_ID FILE_TYPE                      FILE_NAME                                                                        FILE_NODE_NAME                                                                    FILE_SIZE ACTION_TYPE FILE_CREATION_DATE
    --------------------- ---------- ------------------------------ -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ---------- ----------- ------------------
    
    SQL> 
    

    =/

    Published by: Alexandr on 8 November 2012 06:28

  • Where is located the apex pictures folder in an 11g Database XE installation

    Hello

    Does someone know where is located the apex pictures folder in an 11g database installation express? I did a search in the computer and I could not find
    file apex just has some sql files, is not like when you don't download apex itself,.

    I need to find this folder to add some images

    concerning
    Carlos

    XE databases use the external gateway of PL/SQL (EPG) as a Web server. The directory virtual images mapped to a location in the Repository XMLDB. It is accessible using IE on Windows. Search the forum for "WebDAV" know the other methods and platforms.

  • HP workspace: where are located the workspace of HP data centers?

    Hey everybody,

    Where are located the workspace of HP data centers?

    Thank you

    Bill

    HP workspace is currently supported by seven, SSAE16-SOC certified, regional data centers, serving many countries. Data centers are located in Australia, Germany, Ireland, Japan, Singapore, and two in the United States (California and Virginia). The workspace of HP team will be allowing multiple data centers in the coming months to provide global coverage for customers. To see a current list of regional data of the workspace of HP centers refer to www.hpworkspace.com.

  • How to get a ledger_id before release of the report by using FND_PROFILE. Value

    Hi all, I am developing a customized using 10 g generator report. How can I get Ledger_id before release of the report by using FND_PROFILE. VALUE(). I tried with this V_LEDGER_ID: = FND_PROFILE. VALUE('GL_SET_OF_BKS_ID'). But it does not work. Please let me know how to get the legder_id using FND_PROFILE. VALUE before release of the report. Thanks, I'm glad.

    What version of oracle apps?

    have you used the user exist in your report?

    Try using the outputs of the user and P_CONC_REQUEST_ID

  • ID of PK through the report apex using the URL and screen modal popup open

    Hello my dear,

    I use apex 4.2.0.00.27

    I am facing a little problem and I hope that you guys will help me please?

    I have 3 regions. 1 first is view only then 2nd region's interactive report and a 3rd has only 1 column.

    in the report of the region say select id, ename, empno, sal, ' ' edit_link columns for example. region 2 static id is 'Create_Reason'.

    I created DA using code JavaScript as (javascript:openModal('Create_Reason');) for modal and made page region (region 3) so is it opens as a page modal popup.

    I added a url (javascript:openModal('Create_Reason'_) ;) as chosen target is the URL in report item (edit_link).)

    It will open a modal pop-up window average area 3 on the same page and I'm doing what I want to do, but I don't get PK id in session state, so I can't update my chosen rank.

    Because PK ID is not in session state, so I can't use condition where clause and it is not updated my application.

    Any help please?

    Very much appreciated.

    Kind regards

    RI

    I realized it. in fact, I changed the report item (edit_link).  In (link in the column, link attrribute #ID # and the target page in the app and the page # (item1 (hidden) p1_item1 question on the page) and value (#ID #).)

    then I created DA as the loading of the page and run the code JS as javascript:openModal('Create_Reason'); and service area to be displayed and the item added a condition (p_item1 (hidden_item is not null).)

    before has worked, but only he send the page or refresh the screen and load the popup.

    Is anyone has the best solution or higher is good?

    Thank you.

    RI

  • Satellite L650 - where are located the Office Setup files

    Hey there

    I have a problem with office 2007 on my L650 and need to locate the files of configuration/cabins to rerun the Setup program.

    Anyone have any ideas where the files are?

    See you soon

    BTW the prob with Office is when I click on a file to open in office (ie: work.docx) spits out an error saying action valid only for installed products!
    Yet, the icon is there and everything is installed, this happened 2 days without apparent reason.

    I tried to go directly in MS Office file and initialize the word of the "EXE" and it gave me a memory error output.
    Tried to uninstall in Control Panel and still another error came.

    in any case if someone can help please.

    AFAIK the office is preinstalled on your laptop and you can't restart the installation again it of just a trial version and if you want to have a full version, you need to make a purchase.

    In your case, I see only one solution: the device must be reset to the factory settings for Office works again.

  • [ADF, JDev12.1.3.] Where I save the managed bean used by a fragment? Main stream unlimited task or btf?

    Hallo,

    I have a fragment for which I created a managed bean extended backingBean.

    My doubt is where I save this bean.

    In the main stream task without terminals? Or in the stubborn workflow in which the frament is used?

    Thank you

    Federico

    In the BTF where the fragment is used!

  • can view us the report by using the tree node?

    Hi all
    can view us the report using the tree if node, then please guide me

    Sarah

    In the object navigator in the form, there are node named "reports." Create a new entry, and name it "REPORT."

    To call the report use something like the following code:

    DECLARE
      rep REPORT_OBJECT;
      vcServer VARCHAR2(100);
      vcJobId VARCHAR2(100);
      vcUrl VARCHAR2(2000);
      vcServer VARCHAR2(200) := 'PUT_YOUR_REPORTS_SERVERNAME_HERE';
    BEGIN
      rep:=FIND_REPORT_OBJECT('REPORT');
      SET_REPORT_OBJECT_PROPERTY(rep, REPORT_FILENAME, 'put_the_filename_of_your_report_here');
      SET_REPORT_OBJECT_PROPERTY(rep, REPORT_DESTYPE, CACHE);
      SET_REPORT_OBJECT_PROPERTY(rep, REPORT_DESFORMAT, 'PDF');
      SET_REPORT_OBJECT_PROPERTY(rep, REPORT_SERVER,vcServer);
      vcJobId := RUN_REPORT_OBJECT(RO_Report_ID, PL_ID);
      vcJobId := SUBSTR(vcJobId, LENGTH(vcServer) + 2, LENGTH(vcJobId));
      vcUrl:= '/reports/rwservlet/getjobid' || vcJobId || '?server=' || vcServer;
      WEB.SHOW_DOCUMENT(vcUrl, '_blank');
    END;
    
  • Where is locate the source file that is executed when you start sqlplus?

    Hello

    I must add my sqlplus settings when it starts, but I don't know where is located run file during start sql console.
    I try to find on the internet, but without result.
    Also, is there any file that are running sqlplus closing?

    Best.

    Well, just before the output of the command remember to run the coil
    But anyway, you can live without coil you close the sqlplus connection, it stops even when queue.

  • where are located the user passwords?

    Please, help me security oracle clearfy. Oracle contains passwords encrypted in the datadictionary why oracle wants us to create a password file during manual installation?

    Hello

    There is difference between the users of the Application and DBA uses. What ever the password file, you plan for DBA users.

    If the ADMINISTRATOR wants to start an Oracle instance there must be a way for Oracle to authenticate this DBA. That's if (s) he is allowed to do. Obviously, the password can be stored in the database, because Oracle cannot access the database before the instance is started. Therefore, the DBA user authentication must be done outside the database. There are two distinct mechanisms to authenticate the user DBA: using the file password or through the operating system.

    The init parameter remote_login_passwordfile Specifies if a file password is used to authenticate the user DBA or not. If she defined either shared or exclusive use a password file.

    The default location for the password file is:
    $ORACLE_HOME/dbs/orapw$ ORACLE_SID on Unix and
    %ORACLE_HOME%\database\PWD%ORACLE_SID%.ora on Windows.

    Remote_login_passwordfile Specifies if Oracle finds a password file, and if this password file is shared between databases. The following values are possible:
    None
    Oracle ignores the password file, if it exists.
    exclusive
    Password file is exclusively used by a database. Any user can be added to the password file.
    internal
    Used for Oracle Parallel Server shared the password file is shared between databases. However, the only users who can be authenticated are sys (and obsoletly: internal).

    If the password file is shared, only SYS can be added to the password file.

    -Pavan Kumar N

  • How to view the report by using the style of calendar in obiee

    Hello
    Can someone tell me how to view the report as the calendar?
    When I choose chrystelle, it displays 31 days. 7 column, from Sunday to Saturday, and each cell displays the detailed information, such as sales from today!
    Thank you!

    Hello

    Please foloww the below blog...

    http://bischool.WordPress.com/2010/10/22/calendar-view-in-OBIEE-and-applications/

    Thank you
    Vincent

  • Where is located the Contacts/address book template file?

    My custom template of Contacts was damaged. Where is the template located in OS X Yosemite file? I would like to try and restore from a backup.

    Use the Finder > go > go to folder copy and paste:

    ~/Library/application support/AddressBook

Maybe you are looking for

  • Count the number of rising edges in table 1 d

    Hello I wanted to measure the frequency of a pulse signal using a MCC DAQ via libraries ULx in Labview. I have two methods to do this: 1. use the analog inputs: Since data acquisition has only 1 ADC, I use a commune VI acquisition for all channels an

  • try to open a game I have used several times before, on the desktop. get the VIOLATION of ACCESS MEMORY message and cannot open it__

    How to get around this? It worked well before. I recently installed Kapersky. Will this effect to the VIOLATION of ACCESS MEMORY message, when I try to open a particular game?

  • PC stops. no errors.

    My pc stops. No error in the event viewer, no BSOD. Same thing in safe mode with network. Occurs when downloading of files from the Web or watching videos. Can someone help to solve the problems? Running on XP 32-bit SP3 with latest updates. Let me k

  • Work planner 2008 Windows very slow for my application

    I use windows web server 2008, I created an application using VC ++ (6.0) that I use to program via the Scheduler. Problem: whenever I try to run this application with windows 2008 Task Scheduler, it works very very slow, but when I run it manually i

  • HP Color LaserJet CP1515n printer

    I have a dv6 Hp Pavilion Entertainment PC with Windows 7 Home Premium. System type: 64-bit operating system. But I have a problem in istalling the software for HP Color laserjet CP1515n, the bed of the cd that came with the HP Color Laserjet CP 1510