Where we use lookup table?

Hello

Thank you

POOJA

Hi Pooja,

Look up table stores data. Look up table data is automatically updated with other data.

It is used in the "update rule". Look up table has two columns, one for the original values for the changed values.

Here is a link where you can get more help on implementing of lookup table:

"If this, then that"-a Guide to create Lookup Tables in Eloqua

The link "update rule:

How to run an update rule set with a Table of choice on a shared list

I hope this helps.

Kind regards

Eloqua Experts Edynamic

Tags: Marketers

Similar Questions

Generate random data by using lookup tables
I have 2 tables. Student_subject table contains the list of the students and they are enrolled in subjects.
Table Subjent_mark contains valid degrees, a student can have for a topic.
I want to generate data for all students with valid marks randomly.

Examples of data include:

with student_subject as
(select '111' student_id
'rea' subj_id
of the double
Union
Select '111' student_id
subj_id 'wri '.
of the double
UNION
Select '111' student_id
subj_id 'ss '.
of the double
Union
Select '111' student_id
"sci" subj_id
of the double
Union
Select '222' student_id
'rea' subj_id
of the double
Union
Select '222' student_id
subj_id 'wri '.
of the double
UNION
Select '222' student_id
subj_id 'ss '.
of the double
Union
Select '222' student_id
"sci" subj_id
of the double
Union
Select '333' student_id
'rea' subj_id
of the double
Union
Select '333' student_id
subj_id 'wri '.
of the double
UNION
Select '333' student_id
subj_id 'ss '.
of the double
Union
Select '333' student_id
'mus' subj_id
of the double
Union
Select '444' student_id
'rea' subj_id
of the double
Union
Select '444' student_id
subj_id 'wri '.
of the double
Union
Select '444' student_id
subj_id 'ss '.
of the double
Union
Select '444' student_id
'mus' subj_id
of the double
Union
Select '444' student_id
"sci" subj_id
the double)
subject_mark as
(
Select
'rea' subj_id,
' O '
of the double
Union
Select
'rea' subj_id,
THE OF '
of the double
Union
Select
'rea' subj_id,
« N »
of the double
Union
Select
'rea' subj_id,
« P »
of the double
Union
Select
subj_id "wri"
' O '
of the double
Union
Select
'rea' subj_id,
THE OF '
of the double
Union
Select
'rea' subj_id,
« N »
of the double
Union
Select
subj_id "ss."
« A »
of the double
Union
Select
subj_id "ss."
« B »
of the double
Union
Select
subj_id "ss."
« C »
of the double
Union
Select
subj_id "ss."
A '
of the double
Union
Select
subj_id "ss."
« E »
of the double
Union
Select
"sci" subj_id,
« A »
of the double
Union
Select
"sci" subj_id,
« B »
of the double
Union
Select
"sci" subj_id,
« C »
of the double
Union
Select
"sci" subj_id,
A '
of the double
Union
Select
"sci" subj_id,
« E »
of the double
Union
Select
'mus' subj_id,
« A »
of the double
Union
Select
'mus' subj_id,
« P »
of the double
Union
Select
'mus' subj_id,
"NA".
the double)
SELECT * FROM subject_mark has.
student_subject b
where
a.subj_id = b.subj_id
Something like that...?
```
SELECT student_id, SUBJ_ID, subj_mark
from (
SELECT b.student_id, b.SUBJ_ID, a.subj_mark
, row_number() over(partition by b.student_id, b.subj_id order by dbms_random.value) as mark_num
FROM subject_mark a, student_subject b
WHERE a.subj_id = b.subj_id
)
where mark_num = 1
order by student_id, subj_id
;
STUDENT_ID SUBJ_ID SUBJ_MARK
---------- ------- ---------
111        rea     O
111        sci     A
111        ss      D
111        wri     O
222        rea     P
222        sci     D
222        ss      B
222        wri     O
333        mus     A
333        rea     P
333        ss      C
333        wri     O
444        mus     A
444        rea     N
444        sci     B
444        ss      E
444        wri     O         

 17 rows selected 
```
... (assuming that you add subj_mark as an alias in your query of subject_mark)

Kind regards
Bob

Best way to parse a string for use in a lookup table?

I am trying to create a system by which users can create a premade simulation and store simulations in order to easily load at their convenience. The way it works now is that when the user creates a simulation, information on the characteristics of the simulation are condensed down to a 12 string, which is written in a text file with the same name as its content. This string is then read, and ideally, I would have some sort of lookup table to convert characters in the information they have been condensed to. For example, a variable X can have possible values {650,720,851} who gets the mapping to {A, B, C} during the creation process. When loading, I would be able to send in a Sub C - VI and took her out in 851, group in a cluster. How can I perfectly realize this in LV? So far the best I have is this messy thing:

Basically, who runs the string character by character and includes the appropriate value for the character at the given offset.

You want to use the configuration VI palette.

These screws makes it stupid simple save and load the values in the file by using Sections and keys.

You can use the keys 'A', 'B' or 'C' and section 'X' to complete your example.

separate account using the lookup table
How can I get a separate count of column values by using another table?

Let's say I want to get a separate account of all 'company_name' files in the 'emp' table that corespond (soccer match) with table of 'research', 'State' category.

What I want is to find charges for all businesses that have a value of 'california' in the 'Status' column of the 'search' Table. I want the output to look like:

Sears 17
Pennys 22
Marshalls 6
Macys 9

I want the result to show me the company names dynamically as I don't know what they are, just that they are part of the group 'State' in the lookup Table object. Does make sense?

M
If you want a counter for each value of rfs_category, but instead of rfs_category you want to display, it's translated value lookup_value_desc.

This should do it for you:
```
select lookup_value_desc, the_count
  from lookup
  join (select rfs_category, count(*) the_count
          from RFS group by rfs_category)
    on rfs_category = lookup_type;
```

ORCL:lookup - table problem
Hi all

I try to use the orcl: lookup-table of a view, where I pass an id and return the model No.

ORCL:lookup - table("CCS_DFLT_TEMP_BY_PERSON","emplid",ns0:EmplId,"UP_TEMPLATE_NO","JDBC/PersonStore")

Problem is that the CCS_DFLT_TEMP_BY_PERSON is a view and not a table.

Any ideas on how I can solve this problem. I have a collection of data and I loop data in my transformation and so why I need lookup table to work for a view.

Thank you very much

K
You can also make use of xquery?
http://download.Oracle.com/docs/CD/E13159_01/OSB/docs10gr3/Userguide/XQuery.html#wp1101433
FN - bea: execute - sql)

How to create the formula with the lookup table

Hi, I would like to convert formula in the below format of labview, no idea how this could be done more easy way?

I intend to use the node form, but I'm not sure how to use the table of choice within the formula not or is that even possible?

BR, Jani

Dim dblLookUp (-) As Double = New Double (3, 1) {{4, 4}, {10, 200}, {60, 3000}, {100, 7000}}

If dblAbsValue > = 0 and dblAbsValue<= dbllookup(0,="" 0)="">
USB = dblLookUp (0, 1) / dblLookUp (0, 0)
dblAbsValue = dblValue * USB
' lblMode.Text = 1
ElseIf dblAbsValue > dblLookUp (0, 0) and dblAbsValue<= dbllookup(1,="" 0)="">
USB = (dblLookUp (1, 1) dblLookUp (0, 1)) / ((1, 0) - dblLookUp dblLookUp (0, 0))
dblValue = USB * dblAbsValue - USB * dblLookUp (0, 0) + dblLookUp (0, 1)
' lblMode.Text = 2
ElseIf dblAbsValue > dblLookUp (1, 0) and dblAbsValue<= dbllookup(2,="" 0)="">
USB = (dblLookUp (2, 1) dblLookUp (1, 1)) / (dblLookUp (2, 0) - dblLookUp (1, 0))
dblValue = USB * dblAbsValue - USB * dblLookUp (1, 0) + dblLookUp (1, 1)
' lblMode.Text = 3
ElseIf dblAbsValue > dblLookUp (2, 0) and dblAbsValue<= dbllookup(3,="" 0)="">
USB = (dblLookUp (3, 1) dblLookUp (2, 1)) / (dblLookUp (3, 0) dblLookUp (2, 0))
dblValue = USB * dblAbsValue - USB * dblLookUp (2, 0) + dblLookUp (2, 1)
' lblMode.Text = 4
On the other
dblValue = dblLookUp (3, 1) ' * Math.Sign (dblValue)
' lblMode.Text = 5
End If

Return dblValue * intSign

Hello janijt,

You can certainly use formula node for it. What you would do is to create a constant for the lookup table.

Here is an implementation in MathScript node

Can I get the total number of records that meet the conditions of a query using the Table API?

Hello
A < row > TableIterator is returned when I ask operations using the index of tables. If I want to get the total number of records, I count one by one using the returned TableIterator < row >.

Can I get the total number of records directly meets the conditions of the query?
I can get the total number of records directly the request of the meeting of the conditions of CLI using the command Global table - name tableName - count - index index-name-field fieldName - start startValue-end endValue.
Can I get the same results using the Table API?
I used MongoDB and NoSQL Oracle for about a year. According to the experience of the use of these dbs, I think mongoDB querying interface is powerful. In the contras, the query interface is relatively simple, which results is a lot of work that is usually a long time in the client side.

Hello

Counting records in a database is a tricky thing. Any system that gives you an accurate count of the records will have a hotspot of concurrency on updates, namely the place where the counting is maintained. Such a count is a problem of performance in addition to competitive access problem. The problem is even more difficult in a system widely distributed such a NoSQL database.

The CLI has overall command that counts, but does so by brutal force - iterate keys that correspond to the parameters of the operation. This is how you must do this within the API. There is not a lot of code, but you have to write. You certainly want to use TableIterator TableAPI.tableKeysIterator (), because a key iteration is significantly faster than the iteration of lines. Just one iteration and count.

If you use TableAPI.multiGet () and a key with a touch of brightness full then, in fact, count the results as they are returned in a single piece (a list).

Kind regards

George

I get "failed to set the refresh attribute COMMIT for the materialized view" when I try to create a MV using a table and another MV

Experts,
I'm trying to create a YOUNG refreshable ON COMMIT MV (xyz) using a table (circuit) and quickly updateable on validation MV (abc), but get an error:
SQL error: ORA-12054: cannot set the attribute ON COMMIT refresh for the materialized view
12054 00000 - "cannot set the refresh attribute COMMIT for the materialized view.
* Cause: The materialized view did not meet the requirements for update to
moment of validation.
* Action: Specify only valid options.
1] MV abc
= MV abc defined as below =.
CREATE MATERIALIZED view abc_MV
Immediate CONSTRUCTION
REFRESH QUICKLY YOU COMMIT using constraints of trust
WITH ROWID AS SELECT n.*,.
n.ROWID noderowid
node n
where n.nodetype in (1610000069,1610007267);

-Above works OK and MV connect you on table node is created successfully
=====================================================
[ 2] Circuit Board
======================================================
CREATE MATERIALIZED VIEW LOG ON Cramer.Circuit WITH SEQUENCE, ROWID ( ) -all columns of table ofcircut parentheses
INCLUDING THE NEW VALUES;
-More top works OK and MV connect you on table circuit is created successfully
======================================================

[3] trying to create MV xyz
======================================================
CREATE MATERIALIZED VIEW LOG ON cramer.abc_MV WITH SEQUENCE, ROWID ( ) -all columns of abc_MV brackets
INCLUDING THE NEW VALUES;
-Above works OK and log on ABC MV MV gets created successfully
-Problematic step below
Xyz_MV CREATE MATERIALIZED VIEW
IMMEDIATE CONSTRUCTION
REFRESH QUICKLY YOU COMMIT using constraints of trust
AS
SELECT c., c.rowid circuit_rowid, n.rowid tr_rowid
the circuit c, abc_mv n
where circuit2startnode = n.nodeid
and c.rpplanId = n.rpplanId;
==========================================================
Clues on how to solve this problem and make quickly updatable ON Commit MV xyz
Thanks in advance.

Chanchal,

If you can read my original post carefully you may have noticed that all these restrictions will not apply in my case.

All,

In any case I found the solution to my problem.

There are a few additional restrictions for materialized views multilayer

Additional Restrictions for master materialized views

The following types of materialized views may not be masters of editable materialized views:
- ROWIDmaterialized views
- Complex materialized views
- Read-only materialized views
I've updated the underlying MV abc below and everything worked like a charm

CREATE MATERIALIZED view abc_MV

Immediate CONSTRUCTION

REFRESH QUICKLY YOU COMMIT using constraints of trust

IN SELECT

n.*, n.rowid noderowid, nt.rowid nodetyperowid

the node n, nodetype_m nt

where n.node2nodetype = nt.nodetypeid

and nt.nodetypeid in (1610000069,1610007267);

Note: To ADD a join without which I was getting error below (although had primary key on the table of the node)

SQL error: ORA-23415: materialized view log for "NODE" does not save the primary key

23415 00000 - "view the log for materialized \"%s\".\"%s\"does not save the primary key.

* Cause: A primary key materialized view is refreshed quickly, but the

The materialized view log does not record the primary key information.

* Action: Use CREATING MATERIALIZED VIEW LOG... Command to add a PRIMARY KEY to

start recording of the primary key information in the materialized view

Newspaper.

Tree of the University campus solutions 9.0 organization and Lookup Table question

People,
Hello. I'm creating 9.0 Solution Campus of a college. I confront the issue as below:
Implement AWAR > Foundation Table > academic Structure > academic organization
I implemented the academic organization of these data Table: in addition to academic departments, I also type in academic institutions and academic groups.
Then I create academic organization tree using the tree Manager. The tree is verified and valid a date of entry into force.
Then I put in place the 2 tables below:
Implemented AWAR > Foundation Table > academic Structure > program academic table
Implemented AWAR > Foundation Table > academic Structure > Table of different disciplines
Table of research of the academic organization developed in the 2 above table successfully. But when I put in place the other 2 tables below, search for academic organisation table does:
Implement > AWAR > Security > secure Administration of the student > user ID > Security academic organization
Curriculum management > Catalogue > Catalogue courses > tab offer
I understand that the 2 tables above are based on the tree of academic organizations and not on the academic organization Table. I see no error in the tree.
Because the search for academic organisation table can't happen in the tab 'Offers' course catalogue, the course cannot be saved.
My question is:
Any folk can help resolve the issue of the "academic organization lookup table cannot mount security academic organization and in the tab catalog of courses'? Or any suggestion on the tree of the academic organizations?
Thanks in advance.

Perform the following procedure:

Home > ACSS configuration > Security > secure Administration student > process > security update - Acad Orgs

After the execution of the process, check the lookup tables.

API: get the contents of a lookup table?

Hello
I have a small application that automates the deployment of applications. He, among others, should be able to make calls in VSM.
I used a previous version of the API with infraEnterpriseAPI.asmx as an entry point, so I'm not totally familiar with that.
Now, to make a call, the user of my application needs to fill out some information:
-Call description
Status - IPK
-The group in support of the appeal must be sent to
And that's all. There is another piece of information that is too full, but I put all those automatically.
Now, I want to give my menus drop down users about the status of the IPK and the "Forward To" field, because I want to choose what type of call, it should be and who to send it to. They don't know the names or the refs of the IPK statutes or support groups, and they shouldn't have to.
Problem is that I have no idea how to do to get the content of the API lookup tables. Is it possible to do? Or should I (as I did for the previous version) that information straight out of the database?
Best regards
Kris

I think I'll just query the database directly... which seems quite a lot easier.

using multiple tables in a query in expdp clause

Is it possible to use the table of multiples in a query of expdp option? I'm doing the following and it fails with the message 'Invalid identifier' I use Oracle version 10.2.0.3 10
Settings (x.par)
************************
DIRECTORY = DATA_PUMP_DIR
USERID=XYZ/XYZ@DB1
DUMPFILE = X.DMP
LOGFILE = X.LOG
CONTENT = DATA_ONLY
TABLES = "TAB1".
QUERY = TAB1: "WHERE EXISTS (SELECT 1 FROM TAB2 WHERE TAB2.)" KEYID = TAB1. KEYID).
expdp parfile = x.par
Error
******
ORA-00904: "TAB1". "" KEYID ": invalid identifier
Please share your ideas
Thank you

Great, thank you very much.it very really worked.

Lookup tables

I'm new to BC. I use the CRM Web Service API. The OrderList_Retrieve method returns data contains it statusTypeID and orderType. Y at - it any documentation that contains the possible values for these fields or all the other lookup tables that uses BC?
My eyes meet right now with all the documentation I read so I hope that's not look me in the face. Any help finding this information is greatly appreciated.

I found this thread. It seems the status and StatusTypeID list is different for each site. I have to write a quick and dirty program see the codes associated with the status text.

What are the values and the meaning of PaymentStatusID and statusTypeId of the API

View object database lookup Table

Hello
I use JDeveloper 11.1.1.6.0.
Reading Guide of Fusion Developer's for ADF on the sharing of the application module, I found the following note in Section 10.3.1

Note:

While the view read-only objects that you create to access lookup tables are ideal for inclusion in a module of the shared application, if you want to share the view object in an instance of shared application module, you must create the view object in the same package as the module of the shared application.

My question is, why the view object must be in the same package as the module of the shared application? What are the consequences if it is not respected?
Thank you.
Kind regards
Tim

Hello

to me, this looks like a bug in the documentation. I think that its meant to say that both, I and VO must be in the same project structure (the application package should not serious). However, I haven't run a physical test, so do not know if there would be a class path search problem (but why should there be). Probably best for you just run a test.

Frank

using plsql table and ref cursor in oracle's 10 g
Hi all
Can someone give me an example of a scenario where we need to create a form manually based on a stored database procedure.
And in this process, I created a pl/sql table and a Ref cursor at the database level.

CREATE OR REPLACE PACKAGE SCOTT. TYPE BONUS_PKG IS bonus_rec
IS (RECORD
EmpNo bonus_EMP.empno%TYPE,
Ename bonus_EMP.ename%TYPE,
employment bonus_EMP.job%TYPE,
SAL bonus_EMP.sal%TYPE,
Comm bonus_EMP.comm%TYPE);

TYPE b_cursor IS REF CURSOR RETURN bonus_rec;
TYPE bontab IS TABLE OF bonus_rec INDEX DIRECTORY.

PROCEDURE bonus_refcur (bonus_data IN OUT b_cursor);
PROCEDURE bonus_query (bonus_data IN OUT bontab);
END bonus_pkg;

CREATE OR REPLACE PACKAGE BODY SCOTT. BONUS_PKG IS
PROCEDURE bonus_query (bonus_data IN OUT bontab) IS
II NUMBER;
CURSOR bonselect IS
SELECT empno, ename, job, sal, comm bonus_EMP ORDER BY empno;
BEGIN
OPEN bonselect.
II: = 1;
LOOP
Look FOR bonselect IN
.EmpNo bonus_data (ii),
.ename bonus_data (ii),
.job bonus_data (ii),
.Sal bonus_data (ii),
.comm bonus_data (ii);
EXIT WHEN bonselect % NOTFOUND;
II: = ii + 1;
END LOOP;
END bonus_query;

PROCEDURE bonus_refcur (bonus_data IN OUT b_cursor) IS
BEGIN
Bonus_data OPEN to SELECT empno, ename, job, sal, comm bonus_EMP ORDER BY empno;
END bonus_refcur;

END bonus_pkg;

I want to fill in the data in the forms manually is not using Forms data block Wizard and by program.

Please answer...
Can someone give me an example of a scenario where we need to create a form manually based on a stored database procedure.

In general, you will use a block of proceedings based when you have a collection of data from several tables presented in a form and your username must be able to update the information displayed.

In your sample code, looks like you are using Oracle Support document "Melting a block on a Stored Procedure - examples of Code [ID 66887.1]". If this is the case, continue to follow the document - it guides you through all the steps. There is no need to manually configure things that the data block Wizard will work for you!

I want to fill in the data in the forms manually is not using Forms data block Wizard and by program.

Why? Let the wizard block configuration data of your block based on a procedure for you. There is no need to manually browse the data! I did what you're trying, and it's more work needed. Leave forms to do the work for you. :)

If you absolutely have to do things manually, I recommend that you use the PROCEDURE bonus_query (bonus_data IN OUT bontab) instead of bonus_refcur (bonus_data IN OUT b_cursor) . Then, in your code create a variable of type BONTAB, and then call the bonus_query procedure. Then, it's a simple case of a loop in the table of records returned by the bonus_query procedure. For example:
```
DECLARE
   t_bonus    bonus_pkb.bontab;
BEGIN
   bonus_pkg.bonus_query(t_bonus);

   FOR i in 1 .. t_bonus.count LOOP
      :YOUR_BLOCK.EMPLOYEE_NUMBER := t_bonus(i).empno;
      :YOUR_BLOCK.EMPLOYEE_NAME := t_bonus(i).ename;
      :YOUR_BLOCK.EMPLOYEE_JOB := t_bonus(i).job;
      :YOUR_BLOCK.EMPLOYEE_SALARY := t_bonus(i).sal;
      :YOUR_BLOCK.EMPLOYEE_COMMISSION := t_bonus(i).comm;
   END LOOP;
END;
```
This code example shows the basics, but as is the sample code - you will need to adapt to your situation.

Also, I highly recommend that you look at the article inol listed. It is a very thorough debate on the REF CURSOR. If you have set up using a procedure based on the data source - it is more effective to spend the record table to your form that it must pass a ref cursor Using a ref cursor, you might as well just using a standard called cursor and loops on your named cursor. The effect is the same (a line returned at the same time creating lots of network traffic). Using the table of records is more efficient because the data set is returned if the network traffic is reduced.

Hope this helps,
Craig B-)

If someone useful or appropriate, please mark accordingly.

How to use a table in a SQL query

Hello

I need to use a table of numbers as a VARRAY or table of associated Index so that I can do the following SQL code:

Select *.
of *.
where the array is null or id is in table

So that if the array is empty it returns all the records, and if the table is not empty, then it will return only the rows associated with the ID of the table.

Is this possible?

Kind regards

Nestor Boscan

In fact, solution I posted returns all rows when VARRAY is empty, not when it is null. To return all the rows when VARRAY is null, use:

SQL> select  ename
  2    from  emp
  3    where deptno in (select * from table(cast(sys.OdciNumberList(10,30) as sys.OdciNumberList)))
  4       or sys.OdciNumberList(10,30) is null
  5  /

ENAME
----------
ALLEN
WARD
MARTIN
BLAKE
CLARK
KING
TURNER
JAMES
MILLER

9 rows selected.

SQL> select  ename
  2    from  emp
  3    where deptno in (select * from table(cast(null as sys.OdciNumberList)))
  4       or null is null
  5  /

ENAME
----------
SMITH
ALLEN
WARD
JONES
MARTIN
BLAKE
CLARK
SCOTT
KING
TURNER
ADAMS

ENAME
----------
JAMES
FORD
MILLER

14 rows selected.

SQL>

SY.

Where we use lookup table?

Similar Questions

Additional Restrictions for master materialized views

Maybe you are looking for