Which codec is required for the Director?
can not import film after that I have recorded .bccause the codec is necessary, it is not installed on my computer, how do I find codec or where can I find codecs
Hello barrie L1.
Look at the link here for FAQS on Vista codecs.
I hope this helps.
Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Tags: Windows
Similar Questions
-
Original title: problems running Vista on Bootcamp DirectX.
I have browsed the web for the last little while and cannot find any solution.
I am trying to run Rome Total War on Vista, on bootcamp on my iMac 27 ". However, every time I start the game is active an error message saying "Rome: Total War has not find DirectX 9, which is required for the game to run." Please reinstall DirectX.
I've been searching the net and have used some DirectX downloads (9) on several trusted sites, but the error message always everytime that I try to run the game.
I have 'Run' 'dxdiag' and on the 'system' tab is says I have DirectX 11, section 'Information System '.
I do not know where to go from here, any help would be greatly appreciated
-
The amount of space (memory) required for the good functioning of Firefox?
The amount of memory required for the operation of Firefox? Trying to decide between IE and Firefox. Research in the new computer and need to think about which browser to use, and how much space it needs to work properly.
You need no more than 40 MB for the operation of Firefox.
-
Requirements for the latest version of Firefox
I have an old laptop, and it is meanwhile impossble to heal bones, which is severely deteriorated by the use, completely worn out, let's say. It used to be XP home, is the SP2, but several antivirus told me, when trying to install, it is not compatible, it has SP 2 or higher!
I dare not even update Adobe Flash for the same reason. So, I need t know, before I lose my actual Firefox, which are BONES requirementes for the latest version of this product. Thank you. -
The link to the minimum configuration for Firefox 4 beta takes you to a page that gives you the requirements for Firefox 3.6 instead. I guess that the requirements for the beta are different, that I can't seem to install the beta on my Mac. Where can I find the beta version of system requirements?
Firefox 4 will not work on the Mac PPC, for Mac it needs the Intel processor. There is an accumulation of third parties based on Firefox 4 beta, which should work on Mac PPC, for details, see http://www.floodgap.com/software/tenfourfox/
-
Pavilion P077tx: which driver is required for ethernet controller
I have the 64 bit version of windows 7, which is required for the ethernet controller driver. In Device Manager, it is shown by the yellow exclamation point.
Help me
Thank you
Hello:
You need the driver for the ethernet (wired) card.
-
The requirements for the universal Clipboard not correct?
Hello
The requirements for the universal Clipboard for iMac is not correct. It should work on my iMac mid 2011, but it doesn't. It works on my Macbook Air mid-2013, so I know it works in general.
You do not discuss Apple in these forums, we are all users like you.
If you have any questions please ask, however if you have any comments for Apple please leave at www.apple.com/feedback.
-
How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?
See if this application works for you > https://itunes.apple.com/us/app/image-size/id670766542?mt=8
-
where the requirements for the current download? This used to be posted prominently.
where the requirements for the current download? This used to be posted prominently.
See:
You can find the full version of the latest version of Firefox 24.0 in all languages and for all systems operating here:
-
DDL required for the complete installation was not found. Error 1603. What should do? A link where to download the required DLL? Kindly help please.
I tried everything, but received the same message. Attached to the screenshot.
-
I plan to upgrade my OS to El Capitan. What are the processor speed and memory required for the operating system works well?
I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.
My last similar attempt on another machine resulted in a very slow computer.
Thanks, Ron
Apple says the following:
General requirements
- OS X 10.6.8 or later version
- 2 GB memory
- 8.8 GB of available storage
For best performance, I would say not less 4 GB and preferably 8 GB or more.
Your i5 is well able to support properly.
http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration
-
What are the network requirements for the remote server of the Panel?
What are the network requirements for the remote server of the Panel?
I tried for awhile now to set up a Control Board. I can connect to my remote panel of computers from other computers on my local network but nowhere else.
Whenever I use web publishing tool gives me a URL in this format: Http://Computer-Name.Corporate-Name.local:8086 / VI - nom.html apparently it means I have a local DNS server and this URL is meaningless to the public.
When I try to connect with the Operate > Connect to... remote control, I get this error message:
"Connection to Server remote panel...".
"Connection refused by the server remote control specified: make sure that the LabVIEW Web server is enabled on the specified server.I got the same error when I tried to host a remote panel from my laptop at home, on my Wi - Fi. Is there some network settings or firewall I'm not seting? Would it be my server or the router or the private network?
My goal is to be able to host remote panels of my laptop while I'm on the international scene, creating using 4 G internet mobile. Is it still feasible?
As he Turners on my router had to be put in place so that my Port is in the rage of transfer. Also I had to disable DHCP. Without that you cannot host behind a router.
These are the instructions I put fallow:http://digital.ni.com/public.nsf/allkb/B1E9A3D78BAED949862573AD0065D4D2
-
Hi all
I use the model Match 4 IMAQ to detect the angle of rotation of an image of model. However, it displays the error: "error 1074395241: the model descriptor does not contain the data required for the corresponding rotation invariant." What exactly is the problem? How to solve this problem? The details are explained below.
My project is a bit complicated. Part of the block diagram containing the IMAQ Match model 4 is illustrated below:
The source image is a series of images of images read from an AVI video (I used a loop for to process the images frame by frame). The image of the model is an area of the first selected image. So, this means, the user selected the ineterst object in the first frame of the video, and each of the following images to find the object corresponding interest & determine its rotation angle. When I run the above diagram, there no error. However, it shows the angle of rotation zero no matter what it is 'really '. Therefore, I changed the schema by adding parameters, listed below:
But in this case, when I run it, it shows the error I mentioned in the subject line.
If you need more information about my project to identify the problem, please let me know.
Thanks in advance.
S ' Please example from model that comes with labview First
Go to labview Help > find examples and you can search for example.
-You create model with angle range and what kind of special criteria you want to use.
-To do this you must use IMAQ learn pattern before using IMAQ model Match 4
Reference:http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/ -
Requirements for the Labview 8.6 run-time engine
Hello
are there system requirements for the LabVIEW 8.6 run-time engine? for example, same system requirements for LabVIEW 8.6? Internet Explorer 5 is perfect? or Internet Explorer version 6.0 or later is good? It works for Firefox on a Linux Athena mechine?
Thank you
Cynitha
The system requirements can be found in the Release Notes. Pages 2 and 3 indicate the specific requirements for the Run-Time Engine by platform.
-
The settings saved on this computer does not meet the requirements for the network
My old laptop connects fine but my other not. When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."
Hello Tazdmx83,
Thanks for posting on Microsoft answers Community Forums.
This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.
1. click on start and control access panel.
2. double-click on network connections
3. right click on the wireless adapter and select Properties.
4. Select wireless networks, click the name of your wireless network and choose Properties.
5. in network authentication, select open to disable wireless security.
6. Please try to connect.
If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.
http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx
Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.
Remove the driver for the card
========================1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
2. expand "Network adapters", double-click the entry for the wireless network device.
3. click on the "Driver" tab, click "Uninstall".
4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
5 remove the entries related to the wireless network adapter.Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.
Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx
It will be useful.
Thank you and best regards,
Srinivas
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Maybe you are looking for
-
On Satellite 5200 wireless adapter
I have a toshiba satellite s5200 701 has he got a wireless adapter
-
Hello I just bought a Tecra A9... which were pre-installed with Vista. For three weeks, I kept minimum software on this subject... OperaThunderbirdFirefoxEditPlusSmartFTP and it blue screened on me about 4 times a day. EditPlus (a text editor) would
-
XP does not open. PEF files
When I try to open a. The EFP file, Windows does not recognize the file extension and recommend a search on the Web, I have and get all kinds of software for registry error. Is there a simpler solution
-
Hi, my computer still restarts and the Bsod was asked to stop 0x0000D1 and ktqttf.sys. I googled several site, but he said to solve 0x0000D1 need to check the hardware and software. I don't know what hardware or software should remove. And I can not
-
Spectrum XT Touchsmart 15-1410n: does not detect the new hard drive
After the upgrade to Windows 10 my hard drive divided into 9 different partitions, and most of them have been corrupted and I couldn't save it. I bought a new hard drive (HGST Travelstar 7K 1000) and replaced my old drive. I used a USB stick to boot