Which folder or file not hibernation process store open files or programs on the hard drive?

Similar Questions

• Move files and programs split the hard drive

  I am running XP on a disk hard to split, C, and D. All my program files are on C and it is full. There are not many other large files on C. The D drive is only half full. How can I move files from C to D program so that XP can find and they work properly?

  You may not, without uninstalling them and custom install to d. (programs that is)

  You can use a third-party tool of the party, for example Acronis Disk Director to merge partitions, if D contains only data, other wise D to shrink and expand C (all with the tool)

• How to find all the old files and documents on the hard drive

  Original title: how to find a file

  How to find all THE old files and documents on the hard drive

  Hello

  -Are the old hidden files?

  I recommend you follow the steps in these articles for help.

  Show hidden files
  Find a file or folder

• To access the files and folders from the hard drive Windows 7 on Windows XP, access denied error message.

  Original title: portable destroyed - need for car access

  I don't know if this is the right forum - please advice if it is not.

  My friend's laptop computer was destroyed in a car accident. I pulled the drive and placed it in my desktop XP system and the drive appear in good health. However, I received permission issues trying to access records on the disk and thought that it was because of me using Win XP and the laptop was Win7x64. My questions below are based on the assumption that I'm not able to access these files on my Win XP system. If this assumption is incorrect, so please let me know.

  I have a laptop that I don't use and put the disk in it. I was hoping it would be plug and play all the new material, but after reading a little online, I know that this is not the best thing to do and will probably not work as did the earlier versions of Windows.

  In the end, I care retrieves the contents of the disc, although it would be great if I could lend my laptop for a few weeks with "its files" until it sorts how to replace the laptop.

  Can I get the player Win7x64 working on the laptop computer of replacement by reinstalling Win7x64 on this laptop? I'm not "means a clean install/reformat, but have rather the Setup program detects an existing installation, and do its magic to get the operating system runs on new hardware?"

  I know that this raises questions of MS licenses. If the installation process could get his old system running on the laptop replacement, if I have a small window of time completely to access his files before being forced to re-register the OS? I'm hoping so.

  I'm looking for only a short-term solution - I do not recommend that he hopes that drive long term because the laptop got quite truncated of the accident, and once he gets a new laptop it will have everything he needs on this subject (OS, licenses, etc.). If I have a small window of time where I can simply copy their important files, or to lend him my laptop with its player and him can bring to its domestic network and the print out of all the things that are important, that it's going to be all together to move them to a new laptop when it is available.

  Thank you

  Hello

  You experience this problem because of the permissions applied to these s folder.  To resolve this problem, you will need to take ownership of these files and folders.

  Method 1: You can follow the steps mentioned in the link below to take possession of the records

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  (Article above applies to Windows Vista, not valid for Windows XP)

  Also check out the article below

  How to capture a file or a folder in Windows XP
  http://support.Microsoft.com/kb/308421

  Method 2:  You can try a custom installation (not a format\clean facility).

  See the link below for custom installation
  using the install option custom without formatting the hard drive

  Note: In custom installation only data would be transferred in Windows. Drivers, applications and the old folder will need to be reinstalled.

• I got a message that my Windows 7 is not genuine. What steps to follow to format the hard drive and install Windows 7 Home Premium 64 Bit?

  I took my office for repairs after that my motherboard has given. I did an upgrade and the repairman had my re - installed Windows. I know evil to fix my Internet security software and discovered a list of other problems with missing or corrupt files. After inspecting my system, I discovered that the repairman installed Windows with a product key is counterfeit.

  I have my legitimate Windows 7 Home premium disc and product key. How to re - install Windows 7, because windows fitted by repairer are Home Premium 32 Bit, and Windows I have are Home Premium 64 Bit.
  I would like to do a full install of Windows, I backed up all my data and have all the product keys of software installed on my desktop. What steps to follow to format the hard drive and install Windows 7 Home Premium 64 Bit?

  Boot from the DVD 64 bit Windows 7

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  If you have problems, use the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• How to access the files after you put the hard drive in the external case

  I dropped my laptop and it is split.  I bought an external case for hard drive, only to discover, when I try to access the files, I'm not authourized to do.  I know the password, how do I access files, without having to pay someone a large sum of money, "with no warranty.  When I try to access it using the security feature to take possession of the files, they always come to the top an unauthorized.

  Hi martinez_gerald,

  In addition to the suggestion of Chafflube, you can consult the following KB articles and check if it helps.

  1. What is the exact error message you get when you try to access the files?

  You can read the following article and check if it helps:

  Error access is denied"when you try to open a folder

  http://support.Microsoft.com/kb/810881

  Also read the following article:

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• VMX file missing after moving the hard drive

  Hello

  I have a problem with my VM Windows 8, it has stopped working when I moved the physical SSD in a different SATA port on the motherboard. I moved because he was running on the SATA2 instead of the SATA3 and its an SSD.

  When I open VM Workstation 10 I expected to see the virtual machine waiting to be taken up (he was suspended before moving on SSD) but there was only the start option. I pressed start and it gave me a message

  "Could not open computer virtual: E:\windows 8.1\Windows 8.1.vmx.

  File not found

  Then I looked in the phone book and it was noware to be seen! It's just gone. I noticed that there is a file to suspend in the name, it also disappeared at some point.

  I tried to recreate the file .vmx following these instructions:

  VMware KB: Recovery of a lost or deleted Workstation virtual machine configuration file

  I used the same directory and the name of the current virtual machine. When I tried the virtual machine, I got this error:

  "The specified file is not a virtual disk.

  I then tried the again, this time using the same directory, but a different name.

  This time it loaded up, but took a long time, when he finally got the sign in screen that I put my password as normal, but when I looked through the C:\ drive all my programs and documents had disappeared!

  Really starting to panic now, I have loads of work on this virtual machine. I created snapshots, but they do not display inside VMWare, the files are still there.

  I have someone would watch via Skype or team Viewer please let me know and I will set up a screen sharing.

  Thanks for reading, hope someone can help.

  James

  Can you confirm that you have changed the hard with VMware Workstation closed? And you fixed the problem on the disk that appeared when you ran chkdsk?

  What you can try is to see if it works to clone the virtual disk manually by running

  VMware - vdiskmanager.exe, t 0 - r 'Windows 8.1 - 000001.vmdk' 'Windows 8.1 - Clone.vmdk.

  (you may need to provide the full path to the executable file)

  If it doesn't work, that shows the same error message: the GUI?

  André

• How to clean safely on certain files and programs if the C drive is full.

  Vista problem?  How to free up more space.  I have several thousand photographs and I can delete some people.

  Will I need to buy more memory?

  Hello

  see if this program helps you to determine what is take up space

  http://www.Jam-software.com/treesize_personal/

  by default system restore will have up to 15% of the capacity of the hard disk

  you would like to reduce this amount

  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html

  http://www.vista4beginners.com/system-restore-space-used

  also use disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  also scan for malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  and read these information from microsoft on windows optimization

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• is it possible to see EVERY folder and file that exists on the drive hard on one screen and in one place just as you could do in much older versions.

  OK... so I had an accident and there was good and bad news... the good news is that I was able to get it started and running "Save", but the bad news is that instead of giving a new image system clean (as I expected), I had a bunch of random pictures and other unimportant things and many important things seems lost but I think that its still all somewhere.

  now... to the front sometimes there was a windows program called "windows explorer" that would put all folders and all files that was on the hard drive on a single screen, and you can search through them.    When I shoot to the top of the Explorer windows on win 7, I get a page with a bunch of files minor that some things in them, but not what I see already...

  so... my question is simply "is it possible to see EACH file and a file that exists on the drive hard on one screen and in one place just as you do in earlier versions.    I did some research and went thru records that he will show me but I explicitly want is to see EACH file and folder that exists on one screen...

  is it possible in win 7?   and if so, how, please

  Steven

  Steve,

  Are you talking about the Windows Search function?

  In Windows Explorer, open the top-level folder that you want to watch in [C:\Users\yourusername\Documents or whatever it is you want] then look in the upper right area - there is a white box to the right of the address bar.  This is the search box.  Type * and then pause and it lists all the files in this top-level folder down through its subfolders.

  You can find more information about using Windows Search in

  A Guide to using Windows Search; Two Alternatives to Windows - Wiki

• Envy 15-j059nr: Envy 15-j059nr would not start Windows after update to win10 now the hard drive is missing

  This system worked before Windows 8.1 it has been upgraded to Windows 10 last year. It's my boyfriends computer and last night it kept getting blue screen dreaded with errors on his hard drive. He kept ignoring. Then, his computer's battery died and when he started upward, he could get a blue screen and act as if it would repair itself and would just start all over again. He was going in a loop. He did not know what he was doing, but searched on the Internet and ended up messing around any more.

  Its installation was 850 GB HD 3 partitions, it was set up as a Raid was one the main C drive, one was the restore disc and the other hides. He changed the disk. He changed a few things in bios too, but I don't know exactly what.

  The problelm I have right now, is that when that I boot without the USB bootable media, I created, I'm stuck at a screen that says there is no startup disk and no installed operating system and press F2 to run Diagnostics. When I run the diagnostics, just fine, no errors.

  When I try to recover, repair, reimage or anything other that to reinstall, it goes back to the screen I mentioned above which does not allow me to do anything about this either, with the exception of past at the command prompt, which is X and not C. I did a dir/w and only seen the windows files are here , but under the users directory, documents and images are empty, so don't know if it's even watch what I think it is.

  When I want to install Windows 10, everything goes smooth and then bam, he wants that pilots. I can't find the drivers for this laptop who don't have the .exe and require installation. This notebook is not a CD/DVD player on it. I don't mind doing a reformat and start all over, if I could recover his pictures on his hard drive. They are his grandfather.

  Help, please!

  Thank you in advance!

  AggieFan378

  You are the very welcome.

  Unfortunately, I woudn't be able to help you with that.

  I'm afraid that the PC is now a useless paperweight because of the BIOS update has failed.  There is usually no recourse other than to replace the motherboard.

  If all goes well, you were able to recover the files before that happened, and if not, get a SATA cable adapter USB and read the hard drive on another PC.

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• XP is not start properly, important data files on the hard drive, location unknown such as e-mail addresses, individual emails and favorite links on Internet Explorer. The system is damaged irreparably, what is the solution?

  I need ideas to solve this problem.

  You can retrieve the data without being able to get into Windows. The methods described require a certain level of computer skills. You know yourself best, and if a better course of action would be to take the machine to a local professional with a good reputation instead. If you choose to do, do not use a type of BigComputerStore/GeekSquad of the place.

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it- http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  And for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• Transfer of files from the old HARD DRIVE to new computer without an old computer. (He's dead - can not use) I have the hard drive, but need help to transfer my old files and settings.

  ·        My old Win XP computer died - it is completely unusable. I bought a new PC with Win 7 Pro and 1 TB. I still have the old HARD DRIVE (250 GB) which I have attached on the new computer using an external enclosure supports SATA drives. The external hard drive is connected to the computer in USB 3.0. I checked that the new computer can see the external hard drive. (I also used for backups by changing the hard drive with a 2 TB drive 'mass storage' - that works.)

  I searched the internet for possible solutions and found no help. If the transfer of files from Microsoft would change the disc to analyze, it would be simple. But if I select the OLD computer it scans the disk I'm on (new) - automatically.

  Is there anyone who has had the same problem? He must be because computers die all the time and people buy new computers - who then, somehow, they get the former transferred files. I could do it manually, but that wouldn't change the settings. Last resort would be to buy an old computer XP (SATA), replace the drive. Transfer the files, and then sell this computer.

  You may be able to recover your data files, but I hope that you will set up your new system to automatically backup a second internal hard drive or an external USB hard drive.

  This suggestion may not work, but it's worth a try. Buy an external USB drive enclosure. They come in two sizes 2.5 "for the portable computer drives and 3.5" for desktop disks. You can purchase adapters for 3.5 "envelopes so that they can also be used with a portable player. Place the hard drive in the enclosure and connect to a USB port of another computer. Several hard disks are more able to start, but the contents of the disc can still be accessed, read and copied from the disk because you do not use the operating system on a failed disk.

  Here is an example of the type of device, I suggest:
  http://www.amazon.co.uk/s/?ie=UTF8&keywords=external+hardrive+enclosure&tag=googhydr-21&index=aps&hvadid=14388537836&hvpos=1t1&hvexid=&hvnetw=g&hvrand=556960941559985931&hvpone=&hvptwo=&hvqmt=b&ref=pd_sl_32uorbwbuk_b

  You need only to the speaker, that you see are not necessarily more expensive. Thereafter, you can put an old hard drive usable, an abandoned because you need a larger drive internal, in the enclosure and use it as additional external storage.

• If I have windows 7 64 bit and I delete the folder program files (x 86) from my hard drive

  If I have windows 7 64 bit and I delete the folder program files (x 86) from my hard drive

  On Fri, September 14, 2012 03:06:02 + 0000, MerrellWilson wrote:

  It's 74GB and I used 73 GB

  Two points:

  1. If you want to delete some installed programs, do not make
  deletion of the folder they are in. That doesn't remove them only partially and
  can cause problems. Remove programs by in control
  Configuration/program Panel and features.

  2. a drive of 74 GB is a tiny disk these days. There are a number of
  things you can do to save space, but they are all basically
  temporary and you will soon find yourself in the same situation.
  The only real solution is to buy and install a larger capacity drive.
  Fortunately, they are very cheap these days; You can buy a 500GB
  drive for about US $65.

  Ken Blake, Microsoft MVP

• How to organize files on the hard drive? (Not in collection). Lightroom 6, Macintosh

  In Lightroom-6 I want to start to organize photos on the hard drive ("issues").

  (At a later stage, I want to import photos from years back as well).

  I want to organize in "Years" and "month".

  from pictures of the year 2004: I want to create a folder named '2004' in this '2004' - folder I want to create subfolders 12 (months) appointed etcetera 2004-01, 2004-02, 2004-03, 2004-04. (01 = January, 02 = February 03 = March, etc.).

  It should look like this:

  2004

  > 2004-01

  > 2004-02

  > 2004-03

  > 2004-04

  > 2004-05

  etcetera.

  In the LR - app, I think that I am not able to create folders on the hard disk. I created folders in the "masters of Lightroom" - folder, but he won't show as expected in the LR - under 'Files' app after you start Lightroom.

  Before you begin to move the photos to the new folders created, I want to assure you the LR - app can still find later.

  Anyone got a good method or perhaps a statement-link? Other advice most welcome as well.

  Thank you!

  Arnie

  The import dialog box may create the calendar folder based upon import photos that are organized differently in the existing folders. Use the MOVE or COPY option. The instructions are here (see section 5): https://helpx.adobe.com/lightroom/help/import-photos-video-catalog.html

  In addition to the above, you can also organize using keywords.