Which is the correct Point on the waveform of the Signal?

Similar Questions

• I am facing a problem with the beep.vi. I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound.

  I am facing a problem with the beep.vi.  I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound. Everything works fine except the sound alarm. It gives the table 1 d of type mismatch. I tried to fix this by placing it in a box structure. But it still does not work. If someone could help? Please find attached my VI. Best wishes to all visitors to the Forums of Discussion OR.

  Ihab El-Sayed

  published here: http://forums.ni.com/t5/LabVIEW/Playing-sound-based-on-exceeding-a-threshold-value-1D-array-data/m-p...

• Put the data of the set point in a waveform graph

  Hello

  In a graph of measure, which is the result of a waveform, I would add data of the set point as well. How can I add this data to set for the chart value?

  In a control loop system, the output is controlled by a labview program. I would like to see the point of this system as well as in the graph, these thresholds are changed at random times, so I don't know how to create a waveform of these data. Should I create a waveform of the setpoint, or y at - it another option to show the set value in the chart?

  See you soon,.

  Rolf

  That can make it much more difficult.

  At one point an array of 1000 points need to be assembled (obviously). How do depends greatly on your structure. Synchronize the time of the two signals can be very difficult. It would be easy if the set value only changed once a cycle of 1000 point.

  You may want to read the SP as an analog input, so you get 2 samples of the material here. In this way the two will always be synchronized. But I'm done alleady assumption, like this, the signal is an analog input (and the target value of one analogue output). What equipment do you use?

  I think always need you a loop to get data and a loop to set the SP. The two loops will be more parallel execution GLSL and synchroniseent. The trick is to synchronize, or for the deterministic timestamps in two loops. If you can make that happen, you 80% there. You could do loops timed loops (using the same clock). Then you get the timestamps in two loops. The MS loop has the queue changes, pushing the value and time. Then the loop of data can use values and hours to create examples of sp 1000.

• -A file association problem exist, which prevents the file you are trying to download from being associated with the correct application of the operating system using the windows 7 IE 11

  --	Is a file association problem, which prevents the file you are trying to download from being associated with the correct application of the operating system

  IN USING THE WINDOW 7 IE 11 HOW CAN I FIX IT?

  Try to download the installation offline programs:

  • Adobe Reader
  • Flash Player for Internet Exporer - ActiveX
  • Flash Player for Firefox - NPAPI

• I can't reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "the server activation Code error: E_AUTH_NOT_READY" what kind of problem is this and what is more important, how can I resolve it quic

  I can't reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "the server activation Code error: E_AUTH_NOT_READY" what kind of problem is this and what is more important, how can I resolve it quickly. I'm on vacation and you want to read. Thanks for the quick response.

  Yes, actually I talk about digital editions. Do you know how to solve the problem, as stated in my first mail of Digital Editions? Thank you for your kind cooperation.

• I want to install the backup feature in Windows XP. The instructions say to put the Windows XP CD in the computer. I can only find the reinstallation CD "for XP Home Edition, including Service Pack 1" which is the correct CD or is there another?

  This CD is the 'Windows XP' CD?  What he should say about it?  How CD supplied with Windows XP (my computer is probably 4 years old).  I need to install the backup feature in Windows XP.  I cannot find a single CD only and not know if it is right - it's the reinstallation CD.  I don't want to reinstall windows XP. I want to just install the backup feature.

  Hi AlexandraCALIF,

  Thanks for posting. The XP CD that the system is referring to is your XP (maybe not the reinstallation CD) installation CD.  I would test of the first reinstallation CD to see if it has components which seeks the system. If it isn't you need to contact your manufacturer and get a CD of the OS on their part.

  I hope this helps! Let us know if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Catalogs and Collections?  Which is the correct way / better to organize a large library of images?

  Hi all

  I decided to spend time in organizing and creating a backup decent system for my personal iibrary of images which is about 500Gig.

  I used CaptureOne for years, but to do research the best software to use for this purpose, decided to jump in the use of Lightroom.

  I am now reasonably confident with the basics of importing and creating catalogs / folders / Collections etc., but there seems to be a slight fracture on how people break there images using these tools.

  Some people recommend that this is done by creating multiple catalogs is to say every year or even by use / event because it prevents LR latecomers under duress of a large portfolio.   Others say to keep catalogs to an absolute minimum and sort all Collections projects instead.

  I am sure that there is no absolute right and wrong and a lot is probably down to personal preferences, but can I ask the community if you would mind throwing some advantages and disadvantages of each method please?

  Many thanks for any help

  John was soon

  Some people recommend that this is done by creating multiple catalogs is to say every year or even by employment

  It is a horrible idea which defeats the entire purpose of the Lightroom library Module. Any who recommend what needs to explain how it is preferable, because it isn't better somehow, in my opinion.

  If you have multiple catalogs, you can not search for your set of photos. You find not all photos with particular metadata, you can find the photos with this metadata in a catalog.

  because this would prevent late LR under the constraint of a major portfolio

  A problem that does not exist. People in this area and other forums report catalogs more 500 000 pictures works well.

  Others say to keep catalogs to an absolute minimum and sort all Collections projects instead.

  Most people I know (including most of the people in this forum I've read) say to keep everything in a single catalog. Use keywords and other metadata, no collections, as your tool main body. Smart Collections are used as a mechanism of research (not a mechanism of "spell"). Regular collections are used to group the pictures together for a specific task, such as the creation of a book, slideshow, web page, etc. (again not a mechanism of "spell".

• If var! = NULL or if the variable is not NULL which is more correct?

  Hello Experts

  Which of the following is better?

  
  Also when assign us a variable (type nvarchar) null including notation should we use?

  new_address = NULL;

  or

  new_address = ";

  declare
  new_address ADDRESS. ADDRESS TYPE %;
  Start

  new_address: = 'a ';
  If new_address! = NULL then
  dbms_output.put_line(new_address||) e DO ');
  end if;

  end;

  declare
  new_address ADDRESS. ADDRESS TYPE %;
  Start

  new_address: = 'a ';
  If new_address is not NULL then
  dbms_output.put_line(new_address||) e DO ');
  end if;

  end;

  Thank you

  NULL is unknown.

  NULL = false NULL

  NULL! = NULL also false

  ----

  Ramin Hashimzade

• I just learned of outlook express spell corrector English glitch. Can you recommend a spell checking program which includes the grammar?

  I just learned of outlook express spell corrector English glitch.

  Can you recommend a spell checking program which includes the grammar?

  I'm distraught beyon. Thanks much worm... It took entirely too long to get to this point.

  Thank you again... Sophie - KKJ

  Hi desertcanndie,

  Follow the steps in the article.

  Spelling checker does not work on the message in Outlook Express 5

  You no longer have the correction spell checking capabilities in some languages in Outlook Express 6.0 after you install the Microsoft Office 2007 or Office 2010 system

• How to split the signal into small pieces (which have different lengths)

  I have a long waveform which is just a combination of a waveform, waveform 0 + one another + 0 +... I would like to have small pieces of the long wave form.  The problem is that I can't think at least detect the 0 value to separate them.  Any advice would be appreciated.

  

  How are generated segments of zero? They are exactly zero or zero average but with a bit of noise? You know the length of the segments of zero? Is it still the same? One of the waveforms have segments where real values are zero, and, if so, how long these segments is possible?

  My first thought is to use in range & force with limits just a little above and below zero. Verification of the length of a set of samples not in Range.

  Lynn

• Is there possible to see which are the background running processes in the system which is having Windows XP as operating system?

  Is there possible to see which are the background running processes in the system which is having Windows XP as operating system?

  There is no resource manager (or resource monitor) in the XP Task Manager.

  Please read these notes I send to the people who are (sometimes) concerned about the svchost.exe process number they see on their system or when it looks like one of their svchost.exe process has run amok.  We can not all apply to your situation, but I don't want to type in a bunch of stuff once again.  Then get Process Explorer and you will be able to be Omniscient:

  To help understand your processes svchost.exe and what is running under them, read this article and you will be smarter than the average bear:
  http://www.bleepingcomputer.com/tutorials/tutorial129.html

  You may be able to get clues with what is happening with your svchost.exe process using the Task Manager and maybe understand.

  You will always be able to understand what is happening with your svchost.exe process if you use Process Explorer.

  Download Process Explorer, so you can see what is 'really' running on your system, especially behind those svchosts several process see you in the running task manager.

  Download Process Explorer from here:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  You'll like Process Explorer when you get the hang of it.  Process Explorer is the Manager of Windows taskbar on steroids.

  Process Explorer installs nothing so it won't slow down your system since it works only on request.

  Process Explorer can seem a little intimidating at first because it has so much information, but you will begin to make love the way it works when you're looking for performance problems.   You can even say EP you want it to be your new default 'Task Manager' value in the future.  You can always run the original tasks as Manager.

  Once you get Process Explorer running, expand the columns, made drag the corners of the screen for it's largest, etc., so you can see as much information as possible in the window.  Now you can really see what is running on the system.

  Here's a screenshot of my poor system when I use Process Explorer:

  http://img222.imageshack.us/img222/2567/ProcessExplorer.PNG

  The CPU column is usually the most interesting start with performance issues - which uses the most?

  It is OK and normal to have several svchost exe processes running.  Important XP Services are actually running under svchost.exe processes. There are sometimes an XP Service that runs under a svchost.exe process, sometimes there are several Services in XP, which runs under a svchost.exe process.

  Sometimes malware will hide behind a svchost.exe process because the malware knows that you won't be able to find it in the Task Manager.  He will hide behind a svchost.exe process to deceive you, but you can outsmart it.

  Malicious software can disguise itself also seems to be a legitimate process of XP or he could hide under/behind other processes that you see running in Task Manager if you can't see the execution.

  The malware would trick you into thinking you must use a System Restore Point, run a repair install or reinstall your XP from scratch when you really don't.

  Looking at the display in process Explorer, you want the CPU most to be associated with the system idle process.  It's 'free time' on your system, so more time there, more free.

  If you look at the graphs of performance and see red spikes (or not) double click the graphic in the upper left corner to display the graph to use.  Move the mouse over any pics to see what are the causes.  Even if the Spike has already scroll screen, you can still move the mouse over the edge to see what caused.  You can also just wait for a pic to happen and then see what caused the Spike.

• PCG 4A1L LAPTOP COMPUTER WHICH HAVE THE SYSTEM OPERATION

  Ideas:

  • PCG 4A1L LAPTOP COMPUTER WHICH HAVE THE SYSTEM OPERATION
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I'm sorry to hear that. In a little more detail would be helpful. Crystal Ball (tm) says when you turn on the computer you get an error message that says somethng like "cannot find operating system". If Crystal Ball (tm) is correct, your hard drive is dead or your motherboard is a failure. Pull the drive and put it in a disk enclosure or use an adapter and test it on a working machine.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad).

  If Crystal Ball (tm) was cloudy, please specify exactly what is happening with your computer. MS - MVP - Elephant Boy computers - don't panic!

• Which is the default value?

  When I go to devices and printers, I have a HPA3FEDE marked printer icon (HP photosmart plus B209a-metres)

  I also have a laptop icon; Named my PC name, when I click it it says HP Photosmart Plus B209a-m and shows the same as the icon of other print queue.

  Could you please tell me which is the correct icon to set it as default printer, because it works on both? and what is the difference?

  HP Pavilion dv7-3112sa windows 7; by router Netgear DGND 3300 v2

  The Photosmart Plus B209a-m is the default driver.

  Other devices may automatically added by the discovery of Windows.

  Although two of them will print, the printer configured hostname setting can interrupt scanning.

  Make sure that the printer full name icos is set as the default.

• Premiere Elements: I'm doing a montage which is the size of the postcard.  I found how to import pictures, but not how to make a collage.

  Aargh.  I don't know even what are my questions.  I bought the Premiere Elements: check.  I downloaded my purchase: check.  I'm CONFUSED now.  I am trying to achieve a montage which is the size of the postcard.  I found how to import pictures, but not how to make a collage.  I read the instructions to "seek" how to make a collage.  I am more than 50 years, maybe that's my problem.  Please help me to achieve this simple montage.

  [Ask in the correct forum allows... Left Pro for first things first... MOD]

  [title published by mod]

  Premiere Elements is a video editor. You try to make something of a video collage of your photos?

  If you try to make a photo montage in Premiere Elements, you use the wrong tool for the job.

  If you try to make a photo montage, there is a number of tools to do this in Photoshop Elements and the elements Organizer. Actually, the organizer has a tools especially designed to create collages of photos on the tab create. Have you tried to use this tool?

  BTW, I said goodbye to 50 a long, long time ago, pamela. It is really not difficult once you know what you want to do and where are the tools. You will want to perhaps by the book "Muvipix.com Guide Photoshop elements & first Elements 14", available on Amazon, which shows you step by step how to use all the tools in the programs as well as the Organizer.

• Data store 'datastore1' is in conflict with a store of data that exists in the data center which has the same URL (.), but is back different physical storage

  Hello

  I am new to vCenter Server, so you can assume that I'm missing something obvious.

  I installed vCenter Server 5.5 and one of the two hosts of re-usable ESXi 5.0.0 connected correctly. When I try to connect to the second 5.0.0 ESXi host, I get the error message:

  Data store 'datastore1' is in conflict with a store of data that exists in the data center which has the same URL (.), but is supported by different physical storage

  I Googled it and found what I think are the best answers that are successful, but they all seem pretty unique in their situation (they have a cluster, I do not have) etc. Some solutions involve disconnecting the store of data and reconstruction of things. I would not make things worse and can live without doubt with the help of vSphere client (and not the web client) until maybe I can start again with a 5.5 installation to a new host once I have back up everything from the host unconnectable. I closed all the VM on the host of the second. I have put in maintenance mode. I've renamed the data store, all to nothing does not.

  Thanks in advance

  The problem is that a whole army could not be connected to vCenter due to the problem, the solution involving disconnection of the host apply.

  Here is how I solved the problem:

  1 use the client vSphere client heavy, connect you to the host that cannot not be connected to vCenter Server.

  2. click on the host computer, and then click the Configuration tab.

  3. click on "storage".

  4. find the offending on the right data store.

  5. right click on the data store incriminated and click 'remove '.

  6. click on 'Add storage' in the top right.

  7. follow the steps to find this data not mounted store. I gave him a new name just to be sure, even if it's probably not necessary.