which is updated when you turn off your computer

I got a problem with the connection to the internet and also using IE9 when I could. I solved my problem of the internet first by disabling my FIOS router wireless can will turn off PC and when starting, I first turn on my computer desktop and then put on my FIOS wireless router after waiting for about 20 seconds.  IE9 still has problems of since I installed Firefox and it works fine. When I had problems with getting Internet from my office, I was able to access the internet through my laptop using the same wireless router FIOS. I know that I was going through the FIOS wireless router because I could see the correct SSID number. So my question is what happens when off their workstation (which is updated). My desktop is Windows Vista Home Premium and using a wireless router FIOS I know is not (FIOS router) at the origin of the problem.

When you stop your desktop computer, how could anything updated? This is the stop.

Tags: Windows

Similar Questions

  • Can you turn off your computer during defragmantation?

    can you turn off your computer during defragmantation?

    It is possible and it will stop the defragnment progress and it is recommended that let it complete defragnment, and then click shut down or stop, then stop your PC and in this case, you must run it again if you want to run again.

  • Error, we couldn't finish the updates, undo changes turned off your computer

    I waited on the downloads for Windows on another computer running Windows Vista Pro and this error has come and just kept repeating and turn the computer off power then back on but still to come with the error message "we couldn't finish the updates, undo changes off computer.» This causes a huge problem because I can't do anything to stop this error to run, even if I turn the computer and the.

    Hi Yvonne,

    Thank you for keeping us posted.

    I wish that access you Windows recovery environment , and then select command prompt.

    In the command prompt, I need to run these commands one by one-

    takeown /f C:\Windows\winsxs\pending.xmlRen c:\windows\winsxs\pending.xml pending.oldOnce done, I would have you restart the computer and check.Do let us know if you need further assistance.
    
  • Blocked to "we couldn't finish the changes undo updates don't turn off your computer.

    I swear im switching to Mac if it is not fixed and idk what PC is because I know it's a HP touchscreen.

    Hello

    Welcome to the Microsoft community.

    When things do not work as they are supposed to work, we get frustrated. We are sorry for the inconvenience.

    Let me help you quickly on it.

    What operating system is installed on the computer?

    I suggest you to refer to this article and perform troubleshooting.
    http://support.Microsoft.com/kb/949358/en-us

    Clean boot: after troubleshooting in a clean boot state, make sure you put the computer to Normal Startup Mode, following the same link.

    Let us know if it helps. If the problem persists, please answer, we will be happy to help you further.

  • Error "FAILED TO CONFIGURE UPDATES of SYSYTEM REVENANT of CHANGES DO NOT turn OFF YOUR COMPUTER"

    Respected by all,

    Could someone help me please with the problem. I can't access the windows at all. It has blue screen that says "FAILURE TO CONFIGURE updates SYSYTEM RESTORE CHANGES updated DO NOT turn OFF YOUR COMPUTER" pls help

    You may need to stay on this screen for not more than one hour, if there are serious problems with Windows Update.

    If you can always access your PC after waiting, turn off your PC. Then turn it on, immediately pressing F8 constantly. Once you get a black screen with options, select Safe Mode with the arrow keys and press enter on your keyboard.

    Once Windows finishes loading of files, you can start in safe mode, where you should be able to log on normally. You will notice that the screen resolution has changed, and when you log in, you will see a black desktop computer. This lets you know that you are using safe mode. Once you log on, restart normally.

  • Windows installs 3/3 stakes to date "do not turn off your computer.

    Originl title:

    Windows Vista updates

    My laptop does not restart after a recent windows update. All I get is a screen saying "can I install 3 of 3 updates" do not turn off your computer. When it is made 100% it tells me that it restarts. When that happens he tells me it is reinstall 3 3 updates everywhere! When I start my laptop in safe mode, I get the same answer. I'm in a loop.

    Tried to repair after updates by putting in the re - install the windows disc. Even if it will not start at the top.

    Help

    Hello
    1. Are not able to perform you reinstall?
    2. A reinstall succsesfull?
    3. Are not able to launch the start of the disc to perform you reinstall?
    Method 1:
    You can read the following article and check if it solves the problem:
    Windows Update crashes when the download or installation of updates
    Note:
    You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.

    Reference:

    Back up your files

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files

     
    Method 2:
     

    You can perform a clean boot.

    To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to solve the problem by running the clean boot in Windows Vista:
    http://support.Microsoft.com/kb/929135

    Note: when you are finished troubleshooting, work step 7: to reset the computer as usual.

    Method 3:

    Temporarily disable the software antivirus (and any other security software) and firewall on the computer as a test and check if this solves the problem.

    Disable the anti-virus software

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

    Enable or disable Windows Firewall

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

    Caution:

    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 4:

    Check the disc and see if it helps.

    Check a drive for errors

    http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

    Chkdsk WARNING: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    Method 5:
    Note the number of the Base of knowledge (KB) then go to the Microsoft Download Center and enter the number (KB) Knowledge Base Search updates and download to install them manually.

    Microsoft Download Center
     
    I hope this helps!
  • Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

    I got an error message in step 2 of configuring updates - "updates were not correctly configured.  Returning from changes' anyone can help solve this problem?

    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
    http://support.Microsoft.com/kb/949358

  • "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when trying to install Windows on Windows 8 updates

    Former title: windows 8

    Stuck into that and can't GET OUT! Failure of Windows updates. Restoration of the changes. Do not turn off your computer.

    Hello

    Please contact Microsoft Community.

    We understand the inconvenience that you are experiencing.

    1. How long it stays on the same screen?
    2. Windows Update is causing this issue?
    3. Have you tried to interrupt the installation at any time?

    When you try to install Windows updates, you get the following error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen. Suggest you not to interrupt this until he completely undo these changes.

    Please see the article below and see if this can help you.

    https://support.Microsoft.com/en-us/KB/949358

    Let us know if you need assistance.

  • Windows 8.1 message 'you could not complete updates, by undoing the changes, do not turn off your computer.

    Greetings,

    I installed updates in my Windows 8.1 partition.  Then he asked me to restart the computer, and the message "we could not finish updates, exchange loss, do not turn off your computer" appeared and was on-screen for hours.  I thought to reinstall bootcamp but I have software in the Windows partition that cannot be recovered.  I read that one of them starts Windows in 'Safe' Mode, but this is not possible. I use a MacBook Pro (retina, 13 inches, early 2015) OS X 10.10.5

    How can I fix this without wiping the Windows partition and lose my software?

    Thank you!

    Have you created a Windows system restore point before the upgrade?

  • What should I do when Windows Update is blocked for 3 days, saying "do not turn off your computer.

    Windows Vista Home, automatic installation of updates 3 days ago, when it froze. He said 'do not turn off your computer', but ctrl + alt + delete does not work, so what do I do? I can't use all the controls while the update is frozen. If it's a difference, it is stuck on that updated 3/3 to 66%. Thanks in advance.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/computer-freeze-during-Windows-7-update/8968dba7-1e08-4594-bd49-3559d49c6cfe

    08/13 / 1115:29: 13:00 HTC

  • My computer is stuck in ' configuration updated: step 1 of 3-0% complete.» Do not turn off your computer.

    My computer said there has been updates to install yesterday evening, so I clicked on the stop icon to update. This morning when I turned it, it says "configuration updated: step 1 of 3-0% complete." Do not turn off your computer"but does nothing.

    My computer said there has been updates to install yesterday evening, so I clicked on the stop icon to update. This morning when I turned it, it says "configuration updated: step 1 of 3-0% complete." Do not turn off your computer"but does nothing.

    Hey Janeynflorida

    1st thing to try is a restoration of the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    If that does not fix it try repost in the forum update windows for your updates problem

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    Walter, the time zone traveller

  • Updates configuration: phase 2 of 3-100% full. Do not turn off your computer. Don't know what to do next!

    I have a 503WM Compaq Presario with Windows Vista Home Premium, which has problems after a Windows updated today.  First of all, I have installed .NET Framework (3.5?).  Windows Update started and downloaded a few other updates, and then asked to restart my computer - on restart received the updates configuration message, but when you have to configure the updates: phase 2 of 3-100% full.  Do not turn off your computer, nothing happens--or my hard drive internal or external are doing something and Ctrl-Alt-Del does nothing.  What should I do next?

    Before that, I installed Hallmark Card Studio 2010 Deluxe and received an error message 2738.  Followed the instructions on Microsoft to add two files that had to do with the VB script.  Hallmark installation instructions downloaded then installed .NET Framework 3.5.  The update of Windows has started and installed (I think) 4 critical updates.

    Hello

    I guess that part of the question could be a driver which is really old or similar should not be loaded.

    This exit Windows updates on (after you have access) and stop the updates of the driver to load.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ---------------------------------------------------

    You can use the solutions in this KB - 3 methods and I listed a little help for them below

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista
    http://support.Microsoft.com/kb/949358

    Method 1: Start Windows Vista with the Windows installation media and use the repair feature

    How to do a startup repair in Vista
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    You can also do a safe mode startup repair to access the Recovery Options If you have them available
    or use the DVD as described above.

    This tells you how to access the System Recovery Options
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    Method 2: Start the system in safe mode and then use the system restore feature

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can also do a restore of the system of starting with a Vista disk.

    Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
    x 64 64-bit.

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista
    http://support.Microsoft.com/kb/949358

    ------------------------------------------------------

    Once you are in Windows I was running once again reset here as a precaution.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Hope this helps sort it out for you.
    Rob - bicycle - Mark Twain said it is good.

  • My computer is stuck in "configuration updates: stage 3 of 3 0% complete.". Do not turn off your computer. It restarts just over and over again with the same message.

    I have a Dell Inspiron 1525 with Windows Vista, and I have tried the following to fix my endless reboot with the "Configuring updates: stage 3 of 3 0% complete.".  Do not turn off your computer. »

    • I inserted the cd 'Réinstallation DVD Windows Vista', but it won't pop up any kind of prompt for me to do something with it.  I tried putting the cd in what was on the computer and tried leaving him in and restart it - but the cd has no EFFECT.
    • I used the F8 key and I tried the following with no luck: safe mode, safe mode with network, safe mode w / command prompt, enable logging, last known good configuration (Advanced) boot and debug mode.  Most of these options make the monitor off (to make you think he will do something), then it just restarts and did the thing reboot loop again and again.
    • I also tried the repair your computer option to the F8 key.  He asks me to log in as an administrator (but my password does not work).  So, I use the menu drop down and choose the name of my computer and then use my password, and I can connect to "restoration of access options '.  Once I'm in the "System Recovery Options".  I tried the following with no luck: Startup Repair tool, restore the system, Windows complete PC Restore, Windows Memory Diagnostic tool and command prompt.  THE only ONE that I HAVE NOT YET TRIED it IS THE "DELL FACTORY IMAGE RESTORE", it's because I want to try to fix it without losing everything on my hard drive.  Here are the details of the I've tried in the "System Recovery Options".
    • The command prompt says: 32 X:\Windows\system > (I have no idea how to use it, but it's what he says)
    • The memory diagnostic tool reboots the computer, but nothing new happening (just reboot over and over again)
    • In the PC restore full Windows: I tried to put the Windows Vista CD in, but it can not find a valid backup location
    • When I click on the system restore: it is said: "no restore points were created on your computer's system disk.  To create a restore open system protection point.  When I click on the system protection, it is said: "your computer is running in a limited diagnostic State.  If you use the system restore in this limited State, you can't undo the restore operation.  Help topics are not available in this State. "  So I press OK, and I'm back to square one.
    • When I click on startup repair: it says "Startup Repair could not detect a problem.
    • I know there are many many posts on this problem, and I think I've tried all the suggestions on how to solve the problem, but they do not work for me.
    • PLEASE HELP ME!  I need my computer for my college work.  I can't borrow laptop my friend forever!

    Hello

    I guess that part of the question could be a driver which is really old or similar should not be loaded.

    This exit Windows updates on (after you have access) and stop the updates of the driver to load.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ---------------------------------------------------

    You can use the solutions in this KB - 3 methods and I listed a little help for them below

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista
    http://support.Microsoft.com/kb/949358

    Method 1: Start Windows Vista with the Windows installation media and use the repair feature

    How to do a startup repair in Vista
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    You can also do a safe mode startup repair to access the Recovery Options If you have them available
    or use the DVD as described above.

    This tells you how to access the System Recovery Options
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    Method 2: Start the system in safe mode and then use the system restore feature

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can also do a restore of the system of starting with a Vista disk.

    Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

    See article below for that.

    You can use this method on the updates that have this problem.
    http://support.Microsoft.com/kb/949358

    Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
    and install it.

    Microsoft Download Center
    http://www.Microsoft.com/downloads/en/default.aspx

    ------------------------------------------------------

    Once you are in Windows I was running once again reset here as a precaution.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Hope this helps sort it out for you.
    Rob - bicycle - Mark Twain said it is good.

  • I'm in a loop, message "configure update: stage 3 3-0% complete.". Do not turn off your computer. »

    MY HP (VISTA) computer is locked in a loop.  It keeps on rebooting after the following windows message appears: ' updated configuration: stage 3 3-0% complete. ". Do not turn off your computer. "It has been in the loop for 3 days.  ANY IDEAS ON HOW TO GET IT FOR FREE.  I tried most of the things that I can think of.

    The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
    http://support.Microsoft.com/kb/949358

    Obviously you can not run the troubleshooter, read the article and go to method 2, etc.

    Method 2: Use the system restore feature

    Note You must be logged to Windows with an administrator account to complete this method. If it is a computer that is part of a network at work, you should ask the system administrator for help. For more information about how to connect to Windows as an administrator, visit: http://windows.microsoft.com/en-US/windows7/How-do-I-log-on-as-an-administrator

    (http://windows.microsoft.com/en-US/windows7/How-do-I-log-on-as-an-administrator)

    Note If your computer is not configured to start from a CD or a DVD, or if Windows was preinstalled on your computer without the CD or DVD, see the documentation that came with the computer for instruction about how to continue, or go to method 2.

    When you start your computer by using the Windows installation disc, you can run recovery system at boot options. To do this, follow these steps:

    Windows startup :

    1. Insert the Windows Vista or Windows 7 installation disc into the drive and restart the computer.
    2. When you are prompted to start from the disc, press any key any.
    3. When you are prompted, configure the language to install, time and currency formatsand keyboard or input method options that you want, and then click Next.
    4. Click on repair your computer.

    Select a restore point:

    1. In the System Recovery Options page, click the version of the Windows operating system you want to repair, and then click Next.
    2. In the System Recovery Options page, click System Restore.
    3. On the System Restore page, click Next.
    4. Select a restore point during which you know the operating system works, and then click Next.

      The restore point should be a date that precedes the first time you encountered the error. To select a date, use the option to choose a different restore point , and then click Next.

    5. If you are prompted to choose which disk to restore, select the hard disk, and then click Next.
    6. In the confirm your restore point page, click Finish.
    7. When the restore process is complete, click restart.

    Note To avoid this problem in the future, see the steps in the "More information" section

    If the error persists, try Method 2.

    Method 3: Use the functionality in Place Upgrade

    Performing one set to update restores the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD. If your computer came with Windows pre-installed, review the documentation for your computer for instructions on how to make a place in upgarde. Otherwise, follow these steps:

    Note: It is strongly recommended that you back up all your personal files. For more information about how to back up your files, please visit: http://windows.microsoft.com/en-US/windows7/Back-up-your-files

    (http://windows.microsoft.com/en-US/windows7/Back-up-your-files)
    1. Insert the Windows Vista or Windows 7 DVD into the DVD drive of the computer.
    2. In the settings window, click install now.
      • Note If Windows does not automatically detect the DVD, follow these steps:

    1. Click on start and type Drive: \setup.exe in the box to start the search. Note The placeholder drive is the drive letter of the computer's DVD, usually D:\.
    2. List programs, click Setup.exe.
    3. In the settings window, click install now.
  • Click connect to get the latest updates for installation (recommended).
  • Type the CD key if you are prompted to do so.
  • Select the operating system on the Install Windows page, you want to upgrade.
  • Click Yes to accept the Microsoft software license agreement.
  • On the which type of installation you want? of the screen, click upgrade.
  • Once the installation is complete, restart your computer.
  • After trying to install the updates. my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.

    Visa update problem

    After trying to install the updates.  my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.  I tried to follow the instructions provided here because it seemed to be the same problem.  But when I restart and hold down the F8 key so I can boot into safe mode, I tried selecting safe mode and I get the same results, and I tried again by selecting the option 'Disable automatic reboot' which seems to be an option on the same page with the option of safe mode.  Whatever it is, the same message comes back and I can never get to where I can see my desktop to click 'start '.  I can't get out of this cycle.  I installed the update because it said I needed to install it.

    *************************************************************************************************************************************************

    Turn off your computer by holding the power button for about 20 seconds.
     
    Start your computer in safe mode: press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears
     
    Disable the automatic restart in the event of system failure:
     
    • Click Start
    • Click on Control Panel
    • Click on system and Maintenance link.
    • Click on the system link
    • In the left pane, click Advanced system settings
    • Locate the startup and recovery area, click the settings button.
    • In the startup and recovery window, uncheck the box next to automatically restart.
    • Click OK in the startup and recovery window
    • Click OK in the System Properties window
    • Close the system window
     
    After that... While STAYING in safe mode I do a system restore and maybe try a manual install of the update later.
     
    For the sake of space I refer you to the article about how to proceed.
     
     
     
    Please let us know if this solution works for you

    Theresa
    Microsoft Answers Support Engineer

    Hello

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

Maybe you are looking for